decrease default idler clearance

1 files changed, 2 insertions, 2 deletions

diff --git a/another.scad b/another.scad
index 116344e..461dc26 100644
--- a/another.scad
+++ b/another.scad
@@ -29,50 +29,50 @@ module the_extruder(
  filament_guide_d = 4,				// PTFE filament guide diameter
  // knob properties
  knob_h = 10,
  knob_bore_l = 4,
  knob_indent_d = 4,
  knob_indents = 12,
  // spring tensioner
  st_nut_d = 9, st_nut_h = 4,
  st_screw_d = 5,
  st_thickshell = 8*extrusion_width, st_thinshell = 2*extrusion_width,
  st_split_w = 4*extrusion_width,
 
  // screw it
  mount_screw_d = 3.1, mount_screw_l = 20,
  mount_screwhead_d=6, mount_screwhead_h=3,
  idler_screw_d = 3,
  idler_screwhead_d=6, idler_screwhead_h=3,
 
  pf = pushfit_metal,
  pf_shell = max(3*layer_height,3*extrusion_width),
  pf_smooth = true,
 
  // empty spaces
  idler_travel = 3,				// how far should idler travel when pressed
- idler_clearance=1,
- pulley_small_d_clearance=0.5,
+ idler_clearance=.5,
+ pulley_small_d_clearance=.5,
  lever_v_clearance=.7,				// vertical clearance for the lever
  spring_d_clearance=1,
  protrusion_tolerance_h=.5,			// horizontal tolerance for the motor protrusion
  protrusion_tolerance_v=.5,			// vertical tolerance for the motor protrusion
  mount_screw_d_tolerance=.4,
  idler_v_tolerance=.5,
  knob_bore_d_tolerance=.6,
  st_nut_h_tolerance=.2,
  st_nut_d_tolerance=.2,/* TODO: make it st_nut_w_tolerance */
  st_screw_d_tolerance=.5,
  st_split_w_tolerance = .3,
 
  min_z_shell = 4*layer_height,                  // the very minimal shell thickness along z-axis.
  min_xy_shell = 2*extrusion_width,
 
  what="lever",  // lever|body|knob|springpad|*
  left=false,
  vitamins = true,
  bridges = true,
  debug = false,
  label = "another"
 ) {
  fnd = 2*PI; fnr = 2*fnd;
  function lu(m,k) = m[search([k],m)[0]][1];