comments

1 files changed, 3 insertions, 2 deletions

diff --git a/another.scad b/another.scad
index ddca898..5a590db 100644
--- a/another.scad
+++ b/another.scad
@@ -229,73 +229,74 @@ module the_extruder(
     // pushfit bracket
     translate([0,0,filament_elevation])
     rotate([0,0,45]) translate([pulley_d/2,0,0])
     rotate([-90,0,0])
     translate([0,0,mount_d/sqrt(2)/2+mount_screw_d-gearbox_d/2/*TODO:*/])
     cylinder(r=min(body_h-filament_elevation,filament_elevation)/sin(60)-epsilon,h=pf_h(pf)+gearbox_d/2/*TODO:*/,$fn=6);
    }//union (first child of difference)
 
    // protrusion
    translate([0,0,-1])
    cylinder(d=protrusion_d+protrusion_tolerance_h,h=protrusion_h+protrusion_tolerance_v+1,$fn=fnd*(protrusion_d+protrusion_tolerance_h));
    // mount screw holes
    for(zr=[0:90:359]) rotate([0,0,zr]) translate([mount_d/2,0,0]) {
     translate([0,0,mount_screw_l-mounthole_depth/2-layer_height-1])
     mirror([0,0,1])
     cylinder(d=mount_screw_d+mount_screw_d_tolerance,
              h=mount_screw_l-mounthole_depth/2-layer_height+1,
 	     $fn=fnd*(mount_screw_d+mount_screw_d_tolerance));
     translate([0,0,mount_screw_l-mounthole_depth/2])
     cylinder(d=mount_screwhead_d,h=body_h+1,$fn=fnd*mount_screwhead_d);
    }//for
    // pushfit
    translate([0,0,filament_elevation])
    rotate([0,0,45]) translate([pulley_d/2,0,0])
    rotate([-90,0,0])
    translate([0,0,mount_d/sqrt(2)/2+mount_screw_d+epsilon])
    rotate([0,0,180]) {
     pushfit(pf);
     cylinder(d=filament_guide_d,h=gearbox_d,center=true,$fn=fnd*filament_guide_d);
     translate([0,-filament_guide_d/2/sqrt(2),0])
     rotate([0,0,45])
     cube(size=[filament_guide_d/2,filament_guide_d/2,gearbox_d],center=true);
-   }
+   }//rotate translate rotate translate rotate translate
    // pulley
    cylinder(d=pulley_d+pulley_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_clearance));
    // leverspace
    hull() for(x=[0,gearbox_d])
    rotate([0,0,45])
    translate([x,0,ls_z-ls_h/2])
    cylinder(d=idler_d+idler_clearance,h=ls_h,$fn=fnd*(idler_d+idler_clearance));
-   
+
+   // idler clearance
    a=cos(45)*(pulley_d+idler_d)/2;
    b=mount_d/2-a;
    x=sqrt(pow(a,2)+pow(b,2));
    translate([mount_d/2,0,ls_z])
    intersection() {
     r = x+idler_d/2+1;/* TODO: */
     cylinder(r=r,h=ls_h,center=true);
     translate([-r-1,0,-1]) cube(size=[2*r+2,r+1,ls_h+2]);
    }
    
    rotate([0,0,-45])
    translate([0,0,ls_z-ls_h/2])
    cube(size=[gearbox_d,gearbox_d,lever_thickness+lever_v_clearance]);
    translate([0,0,ls_z-ls_h/2]) {
     translate([mount_screwhead_d/2,0,0])
     mirror([0,1,0])
     cube(size=[gearbox_d,gearbox_d/2+1,lever_thickness+lever_v_clearance]);
    }
    //translate([-mount_d/2,-longwing,filament_elevation])
    if(!tensioner) /* XXX: this seems to be bullshit, but it's so old, that it's historical bullshit */
    translate([mount_d/2,-longwing,filament_elevation])
    rotate([0,-90,0]) difference() {
     cylinder(d=spring_d+spring_d_clearance,h=spring_lc+spring_dl,$fn=fnd*(spring_d+spring_d_clearance));
     translate([0,0,spring_lc+spring_dl]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4);
    }
     
   }//difference
 
   if(supports) intersection() {
    difference() {
     translate([0,0,ls_z-ls_h/2-epsilon])
     cylinder(d=gearbox_d,h=ls_h+2*epsilon,$fn=fnd*gearbox_d);