move spring closer

1 files changed, 27 insertions, 28 deletions

diff --git a/another.scad b/another.scad
index 78d4320..b752f30 100644
--- a/another.scad
+++ b/another.scad
@@ -80,9 +80,9 @@ module the_extruder(
  idler_filament_offset = filament_path_d/2; // -filament_offset;
  lever_shell = mount_screwhead_h+0.5;
  lever_thickness=max(spring_d+spring_d_clearance+layer_height*8,idler_h+idler_v_tolerance+2*lever_shell);
  lsd = idler_d-idler_clearance*2;
- longwing=gearbox_d/2+spring_d/2+lsd/2;
+ longwing=(mount_d+mount_screw_d+mount_screw_d_tolerance+spring_d+spring_d_clearance)/2+extrusion_width;
  shortwing = let(a=mount_d/2,c=(pulley_d+idler_d)/2/sqrt(2))
              sqrt(c*c+pow(a-c,2));
  longwing_travel = idler_travel*longwing/shortwing;
  h_ = (pulley_d+idler_d)/(2*sqrt(2));
@@ -234,11 +234,10 @@ module the_extruder(
  module body() {
   difference() {
    union() {
     cylinder(d=gearbox_d,h=body_h,$fn=fnd*gearbox_d);
-    translate([-gearbox_d/2,0,0]) difference() {
-     union() {
-      hull() {
+    // spring tensioner part
+    translate([-gearbox_d/2,0,0]) hull() {
        translate([0,-longwing,ls_z])
        rotate([0,90,0])
        cylinder(d=lever_thickness,h=fsw,$fn=fnd*lever_thickness);
        hh=body_h-ls_z;
@@ -246,32 +245,9 @@ module the_extruder(
        mirror([0,1,0]) cube(size=[fsw,longwing+(st_thinshell+st_split_w_tolerance)/2+st_thickshell,body_h-ls_z]);
        hhh=ls_z;
        translate([0,0,0])
        mirror([0,1,0]) cube(size=[fsw,longwing-hhh+lever_thickness/sqrt(2),hhh+lever_thickness/2]);
-      }
-     }
-     translate([0,-longwing,ls_z]) rotate([0,-90,0]) {
-      if(!tensioner) finger_indent(d=lever_thickness-1,r=15); else {
-       mirror([0,0,1]) {
-	translate([0,0,st_thickshell])
-	hull() for(o=[0,spring_d]) translate([0,-o,0])
-	rotate([0,0,30])
-	cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6);
-	translate([0,0,-1]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=fsw+2,$fn=fnd*(st_screw_d+st_screw_d_tolerance));
-	bigd = spring_d+spring_d_clearance;
-	hf = (bigd-st_screw_d-st_screw_d_tolerance)/2;
-	translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) {
-	 cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd,
-	  h=hf+epsilon, $fn=fnd*bigd);
-	 translate([0,-(st_thinshell+st_split_w_tolerance)/2,0])
-	 cube(size=[body_h-ls_z+1,st_thinshell+st_split_w_tolerance,fsw+1]);
-	}
-	translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon])
-	cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd);
-       }
-      }
-     }
-    } // translate
+    }//hull translate
     
     // pushfit bracket
     translate([0,0,filament_elevation])
     rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0])
@@ -385,8 +361,31 @@ module the_extruder(
     cylinder(d=spring_d+spring_d_clearance,h=spring_lc+spring_dl,$fn=fnd*(spring_d+spring_d_clearance));
     translate([0,0,spring_lc+spring_dl]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4);
    }
 
+   // spring tensioner
+   translate([-gearbox_d/2,-longwing,ls_z]) rotate([0,-90,0]) {
+    if(!tensioner) finger_indent(d=lever_thickness-1,r=15); else {
+     mirror([0,0,1]) {
+      translate([0,0,st_thickshell])
+      hull() for(o=[0,spring_d]) translate([0,-o,0])
+      rotate([0,0,30])
+      cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6);
+      translate([0,0,-1]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=fsw+2,$fn=fnd*(st_screw_d+st_screw_d_tolerance));
+      bigd = spring_d+spring_d_clearance;
+      hf = (bigd-st_screw_d-st_screw_d_tolerance)/2;
+      translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) {
+       cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd,
+        h=hf+epsilon, $fn=fnd*bigd);
+       translate([0,-(st_thinshell+st_split_w_tolerance)/2,0])
+       cube(size=[body_h-ls_z+1,st_thinshell+st_split_w_tolerance,fsw+1]);
+      }
+      translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon])
+      cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd);
+     }
+    }
+   }
+
   }//difference
 
   if(supports) intersection() {
    difference() {