another: add tensioner screw tolerance

1 files changed, 6 insertions, 5 deletions

diff --git a/another.scad b/another.scad
index 7a3b0ac..da5f695 100644
--- a/another.scad
+++ b/another.scad
@@ -54,12 +54,13 @@ module the_extruder(
          protrusion_tolerance_v=.5,             // vertical tolerance for the motor protrusion
  mount_screw_d_tolerance=.4,
  idler_v_tolerance=.5,
  knob_bore_d_tolerance=.6,
  st_nut_h_tolerance=.2,
  st_nut_d_tolerance=.2,/* TODO: make it st_nut_w_tolerance */
+ st_screw_d_tolerance=.3,
 
  what="lever",  // lever|body|knob|springpad|*
  left=false,
  vitamins = true,
  supports = false, bridges = true,
  tensioner = true,
@@ -213,17 +214,17 @@ module the_extruder(
       if(!tensioner) finger_indent(d=lever_thickness-1,r=15); else {
        mirror([0,0,1]) {
         translate([0,0,st_thickshell])
         hull() for(o=[0,spring_d]) translate([0,-o,0])
         rotate([0,0,30])
         cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6);
-        translate([0,0,-1]) cylinder(d=st_screw_d,h=fsw+2,$fn=fnd*st_screw_d);
+        translate([0,0,-1]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=fsw+2,$fn=fnd*(st_screw_d+st_screw_d_tolerance));
         bigd = spring_d+spring_d_clearance;
-        hf = (bigd-st_screw_d)/2;
+        hf = (bigd-st_screw_d-st_screw_d_tolerance)/2;
         translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon])
-        cylinder(d1=st_screw_d,d2=bigd,
+        cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd,
          h=hf+epsilon, $fn=fnd*bigd);
         translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon])
         cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd);
        }
       }
      }
@@ -332,26 +333,26 @@ module the_extruder(
    }
   }
 
  }//body module
 
  module springpad() {
-  smalld=st_screw_d+2*extrusion_width;
+  smalld=st_screw_d+st_screw_d_tolerance+2*extrusion_width;
   bigd = spring_d+spring_d_clearance/2;
   hf = (bigd-smalld)/2;
   translate([-gearbox_d/2+st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+1,-longwing,filament_elevation])
   rotate([0,90,0]) difference() {
    union() {
     cylinder(d1=smalld,d2=bigd,h=hf,$fn=fnd*bigd);
     translate([0,0,hf-epsilon])
     cylinder(d=bigd,h=hf*2,$fn=fnd*bigd);
     translate([0,0,3*hf])
     sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4);
    }
    translate([0,0,-epsilon])
-   cylinder(d=st_screw_d,h=2*hf+epsilon,$fn=fnd*st_screw_d);
+   cylinder(d=st_screw_d+st_screw_d_tolerance,h=2*hf+epsilon,$fn=fnd*(st_screw_d+st_screw_d_tolerance));
   }
  }
 
  module knob() {
   ch = knob_indent_d/2;
   translate([0,0,body_h+epsilon]) {