move pushfit a tiny bit closer

1 files changed, 5 insertions, 4 deletions

diff --git a/another.scad b/another.scad
index 0d67286..8334b11 100644
--- a/another.scad
+++ b/another.scad
@@ -104,12 +104,14 @@ module the_extruder(
  ls_z = filament_elevation; // leverspace mid-z
  ls_h = lever_thickness+lever_v_clearance; // leverspace height
  mount_depth = mount_screw_l - (ls_z+ls_h/2+min_z_shell);
  body_h = max(protrusion_h+bore_l,mount_screw_l-mount_depth+mount_screwhead_h+min_z_shell,ls_z*2);
  echo("mount depth",mount_depth);
 
+ pf_offset = mount_d/sqrt(2)/2+mount_screw_d/2+min_xy_shell;
+
  module teardrop(r,d,h,center=false,angle=45) {
   dd = d ? d : (2*r);
   $fn = dd*fnd;
   cylinder(d=dd,h=h,center=center);
   if(angle>0) translate([0,0,center?-h/2:0])
    rotate([0,0,angle])
@@ -157,13 +159,13 @@ module the_extruder(
      rotate([0,0,45]) {
       translate([pulley_d/2-idler_filament_offset,0,0]) rotate([90,0,0]) {
        cylinder(d=filament_d,h=gearbox_d,center=false,$fn=15);
       }//rotate translate
       translate([pulley_d/2+filament_offset,0,0]) rotate([-90,0,0]) {
        cylinder(d=filament_d,h=gearbox_d,center=false,$fn=15);
-       translate([0,0,mount_d/sqrt(2)/2+mount_screw_d])
+       translate([0,0,pf_offset])
        pushfit(pf);
       }//rotate translate
      }//rotate
     }//translate teeth
    }//translate pulley
   }//translate protrusion
@@ -251,13 +253,13 @@ module the_extruder(
     }//hull translate
     
     // pushfit bracket
     translate([0,0,filament_elevation])
     rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0])
     rotate([-90,0,0])
-    translate([0,0,mount_d/sqrt(2)/2+mount_screw_d-gearbox_d/2/*TODO:*/]) {
+    translate([0,0,pf_offset-gearbox_d/2/*TODO:*/]) {
      pfbl = pf_h(pf)+gearbox_d/2; //TODO:
      pfbd = pf_d(pf)+2*pf_shell;
      hull() {
       cylinder(d=pfbd,h=pfbl,$fn=pfbd*fnd);
       translate([-epsilon/2,0,0]) {
        cube(size=[epsilon,filament_elevation,pfbl-filament_elevation+pfbd/2]);
@@ -279,13 +281,12 @@ module the_extruder(
              h=mount_screw_l-mount_depth+1,
              $fn=fnd*(mount_screw_d+mount_screw_d_tolerance));
     translate([0,0,mount_screw_l-mount_depth])
     cylinder(d=mount_screwhead_d,h=body_h+1,$fn=fnd*mount_screwhead_d);
    }//for
    // pushfit
-   pf_offset = mount_d/sqrt(2)/2+mount_screw_d;
    translate([0,0,filament_elevation])
    rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0])
    rotate([-90,0,0])
    translate([0,0,pf_offset])
    rotate([0,0,180]) {
     pushfit(pf);
@@ -318,13 +319,13 @@ module the_extruder(
    }
 
    // back side cutout
    // XXX: this is somewhat ugly and potentially bugged,
    //      but I want to sleep.
    a0_ = atan(
-    (mount_d/sqrt(2)/2+mount_screw_d+pf_h(pf)+gearbox_d/2)
+    (pf_offset+pf_h(pf)+gearbox_d/2)
     /
     (
      pulley_d/2+filament_offset-
      (pf_d(pf)+2*pf_shell)/2/cos(30)
     )
    );