finetune filament offset relative to the pulley

1 files changed, 7 insertions, 6 deletions

diff --git a/another.scad b/another.scad
index b80d0d0..a93d21a 100644
--- a/another.scad
+++ b/another.scad
@@ -15,12 +15,13 @@ module the_extruder(
  bore_d = 8, bore_l = 17.6,
  bore_dd = 7,
  // pulley properties
  pulley_d = 11.5, pulley_h=10,
  pulley_elevation = 1,				// pulley elevation above the protrusion
  teeth_elevation = 7.5,				// distance from the bottom of the pulley to its teeth
+ filament_offset = (8.25-(3.0+3.5)/2) - 11.5/2 + 1.75/2,
  // idler properties
  idler_d = 9.5, idler_h = 4, idler_id = 3,	// idler dimensions: outer and inner diameters and height
  // spring properties
  spring_d = 10, spring_lc = 9.6,		// spring diameter and compressed length
  // filament path properties
  filament_d = 1.75,
@@ -118,13 +119,13 @@ module the_extruder(
     translate([0,0,teeth_elevation]) {
      place_idler() {
       cylinder(d=idler_d,h=idler_h,center=true,$fn=30);
       cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30);
      }//place idler
      // filament path
-     rotate([0,0,45]) translate([pulley_d/2,0,0]) {
+     rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0]) {
       rotate([90,0,0]) cylinder(d=filament_d,h=gearbox_d*2,center=true,$fn=15);
       rotate([-90,0,0])
       translate([0,0,mount_d/sqrt(2)/2+mount_screw_d])
       pushfit(pf);
      }
     }//translate teeth
@@ -149,18 +150,18 @@ module the_extruder(
       cylinder(d=lever_thickness,h=lsd,center=true,$fn=60);
      }//hull
     }//union
  
     // filament path
     place_idler() {
-     translate([-idler_d/2,0,0]) rotate([90,0,0]) {
+     translate([-idler_d/2+filament_offset,0,0]) rotate([90,0,0]) {
       cylinder(d=filament_path_d,h=3*gearbox_d,center=true,$fn=30);
       translate([0,-filament_path_d/2/sqrt(2),0]) rotate([0,0,45])
       cube(size=[filament_path_d/2,filament_path_d/2,3*gearbox_d],center=true);
      }//rotate translate
-     translate([-idler_d/2,0,0])
+     translate([-idler_d/2+filament_offset,0,0])
      rotate([90,0,0])
      translate([0,0,
       sqrt(2)*(mount_d-pulley_d+lsd)/2
      ]) {
       cylinder(d1=filament_path_d,d2=2*filament_path_d,
                h=filament_path_d,$fn=2*filament_path_d*fnd);
@@ -243,13 +244,13 @@ module the_extruder(
       }
      }
     } // translate
     
     // pushfit bracket
     translate([0,0,filament_elevation])
-    rotate([0,0,45]) translate([pulley_d/2,0,0])
+    rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0])
     rotate([-90,0,0])
     translate([0,0,mount_d/sqrt(2)/2+mount_screw_d-gearbox_d/2/*TODO:*/]) {
      pfbl = pf_h(pf)+gearbox_d/2; //TODO:
      if(pf_smooth) {
       pfbd = pf_d(pf)+2*pf_shell;
       hull() {
@@ -289,13 +290,13 @@ module the_extruder(
 	     $fn=fnd*(mount_screw_d+mount_screw_d_tolerance));
     translate([0,0,mount_screw_l-mounthole_depth/2])
     cylinder(d=mount_screwhead_d,h=body_h+1,$fn=fnd*mount_screwhead_d);
    }//for
    // pushfit
    translate([0,0,filament_elevation])
-   rotate([0,0,45]) translate([pulley_d/2,0,0])
+   rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0])
    rotate([-90,0,0])
    translate([0,0,mount_d/sqrt(2)/2+mount_screw_d+epsilon])
    rotate([0,0,180]) {
     pushfit(pf);
     cylinder(d=filament_guide_d,h=gearbox_d,center=true,$fn=fnd*filament_guide_d);
     translate([0,-filament_guide_d/2/sqrt(2),0])
@@ -325,13 +326,13 @@ module the_extruder(
    // XXX: this is somewhat ugly and potentially bugged,
    //      but I want to sleep.
    a0_ = atan(
     (mount_d/sqrt(2)/2+mount_screw_d+pf_h(pf)+gearbox_d/2)
     /
     (
-     pulley_d/2-
+     pulley_d/2+filament_offset-
      (pf_d(pf)+2*pf_shell)/2/cos(30)
     )
    );
    a0 = -135 + ( (a0_>0) ? a0_ : 180+a0_ );
    a1 = atan((longwing-lever_thickness/2)/(gearbox_d/2));
    translate([0,0,ls_z]) difference() {