the comment

1 files changed, 1 insertions, 1 deletions

diff --git a/another.scad b/another.scad
index b752f30..2383276 100644
--- a/another.scad
+++ b/another.scad
@@ -1,179 +1,179 @@
 draft=true;
 layer_height=0.2; extrusion_width=0.4;
 epsilon=0.01;
 $fs=0.0125;
 
 use <pushfittery.scad>;
 include <pushfit_data.scad>;
 
 module the_extruder(
  // motor properties
  gearbox_d = 36,
  mount_d = 28,					// the distance between opposite mounting holes
  mounthole_depth = 5,
  mounthole_min_depth = 3, mounthole_max_depth = 4,
  protrusion_d = 22, protrusion_h = 2.2,		// the dimensions of the protrusion on top of gearbox
  bore_d = 8, bore_l = 17.6,
  bore_dd = 7,
  // pulley properties
  pulley_d = 11.5, pulley_h=10,
  pulley_elevation = 1,				// pulley elevation above the protrusion
  teeth_elevation = 7.5,				// distance from the bottom of the pulley to its teeth
  filament_offset = (8.25-(3.0+3.5)/2) - 11.5/2 + 1.75/2,
  // idler properties
  idler_d = 9.5, idler_h = 4, idler_id = 3,	// idler dimensions: outer and inner diameters and height
  // spring properties
  spring_d = 10, spring_lc = 9.6,		// spring diameter and compressed length
  // filament path properties
  filament_d = 1.75,
  filament_path_d = 2,
  filament_guide_d = 4,				// PTFE filament guide diameter
  // knob properties
  knob_h = 10,
  knob_bore_l = 4,
  knob_indent_d = 4,
  knob_indents = 12,
  // spring tensioner
  st_nut_d = 9, st_nut_h = 4,
  st_screw_d = 5,
  st_thickshell = 8*extrusion_width, st_thinshell = 4*extrusion_width,
 
  // screw it
  mount_screw_d = 3.1, mount_screw_l = 20,
  mount_screwhead_d=6, mount_screwhead_h=3,
  idler_screw_d = 3,
  idler_screwhead_d=6, idler_screwhead_h=3,
 
  pf = pushfit_embeddest,
  pf_shell = max(3*layer_height,3*extrusion_width),
  pf_smooth = true,
 
  // empty spaces
  idler_travel = 3,				// how far should idler travel when pressed
  idler_clearance=1,
  pulley_d_clearance=2,
  pulley_small_d_clearance=0.5,
  lever_v_clearance=.7,				// vertical clearance for the lever
  spring_d_clearance=1,
  protrusion_tolerance_h=.5,			// horizontal tolerance for the motor protrusion
  protrusion_tolerance_v=.5,			// vertical tolerance for the motor protrusion
  mount_screw_d_tolerance=.4,
  idler_v_tolerance=.5,
  knob_bore_d_tolerance=.6,
  st_nut_h_tolerance=.2,
  st_nut_d_tolerance=.2,/* TODO: make it st_nut_w_tolerance */
  st_screw_d_tolerance=.5,
  st_split_w_tolerance = .3,
 
  min_z_shell = 4*layer_height,                  // the very minimal shell thickness along z-axis.
  min_xy_shell = 2*extrusion_width,
 
  what="lever",  // lever|body|knob|springpad|*
  left=false,
  vitamins = true,
  supports = false, bridges = true,
  tensioner = true,
  debug = false
 ) {
  fnd = 2*PI; fnr = 2*fnd;
 
  idler_filament_offset = filament_path_d/2; // -filament_offset;
  lever_shell = mount_screwhead_h+0.5;
  lever_thickness=max(spring_d+spring_d_clearance+layer_height*8,idler_h+idler_v_tolerance+2*lever_shell);
- lsd = idler_d-idler_clearance*2;
+ lsd = idler_d-idler_clearance*2; // the diameter of lever thingie
  longwing=(mount_d+mount_screw_d+mount_screw_d_tolerance+spring_d+spring_d_clearance)/2+extrusion_width;
  shortwing = let(a=mount_d/2,c=(pulley_d+idler_d)/2/sqrt(2))
              sqrt(c*c+pow(a-c,2));
  longwing_travel = idler_travel*longwing/shortwing;
  h_ = (pulley_d+idler_d)/(2*sqrt(2));
  ri = sqrt( pow(h_,2) + pow(mount_d/2-h_,2) );
  spring_dl = idler_travel*longwing/ri;
  // finger and spring support
  fsw = gearbox_d-(gearbox_d-mount_d)/2-max(spring_lc,longwing_travel+(gearbox_d-mount_d)/2);
 
  mount_min_depth = mounthole_min_depth ? mounthole_min_depth : mounthole_depth-1;
  mount_max_depth = mounthole_max_depth ? mounthole_max_depth : mounthole_depth+1;
  filament_elevation=protrusion_h+pulley_elevation+teeth_elevation;
  ls_z = filament_elevation; // leverspace mid-z
  ls_h = lever_thickness+lever_v_clearance; // leverspace height
  mount_depth = mount_screw_l - (ls_z+ls_h/2+min_z_shell);
  body_h = max(protrusion_h+bore_l,mount_screw_l-mount_depth+mount_screwhead_h+min_z_shell,ls_z*2);
  echo("mount depth",mount_depth);
 
  module teardrop(r,d,h,center=false,angle=45) {
   dd = d ? d : (2*r);
   $fn = dd*fnd;
   cylinder(d=dd,h=h,center=center);
   if(angle>0) translate([0,0,center?-h/2:0])
    rotate([0,0,angle])
    cube(size=[d/2,d/2,h]);
  }
 
  module mirrorleft() {
   mirror([left?0:1,0,0]) children();
  }
  module place_idler() {
   rotate([0,0,45])
   translate([(pulley_d+idler_d)/2,0,0])
   children();
  }
  module finger_indent(d=lever_thickness,depth/*=1*/,r/*=15*/) {
   if(depth) {
    hh = (-4*pow(depth,2)+pow(d,2))/(8*depth);
    rr = depth+hh;
    translate([0,0,hh]) sphere(r=rr,$fn=fnr*rr);
   }else if(r) {
    hh=sqrt(pow(r,2)-pow(d,2)/4);
    translate([0,0,hh]) sphere(r=r,$fn=fnr*r);
   }
  }
 
  % if(vitamins) mirrorleft() {
   translate([0,0,-epsilon]) mirror([0,0,1]) cylinder(d=gearbox_d,h=1,$fn=60);
   for(zr=[0:90:359]) rotate([0,0,zr]) translate([mount_d/2,0,0])
    cylinder(d=mount_screw_d,h=20,$fn=30);
   translate([0,0,-epsilon]) cylinder(d=protrusion_d,h=protrusion_h,$fn=30);
   translate([0,0,protrusion_h]) {
    difference() {
     cylinder(d=bore_d,h=bore_l,$fn=30);
     translate([-bore_d/2-1,bore_dd-bore_d/2,-1])
     cube([bore_d+2,bore_d/2,bore_l+2]);
    }
    translate([0,0,pulley_elevation]) {
     cylinder(d=pulley_d,h=pulley_h,$fn=30);
     translate([0,0,teeth_elevation]) {
      place_idler() {
       cylinder(d=idler_d,h=idler_h,center=true,$fn=30);
       cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30);
      }//place idler
      // filament path
      rotate([0,0,45]) {
       translate([pulley_d/2-idler_filament_offset,0,0]) rotate([90,0,0]) {
        cylinder(d=filament_d,h=gearbox_d,center=false,$fn=15);
       }//rotate translate
       translate([pulley_d/2+filament_offset,0,0]) rotate([-90,0,0]) {
        cylinder(d=filament_d,h=gearbox_d,center=false,$fn=15);
        translate([0,0,mount_d/sqrt(2)/2+mount_screw_d])
        pushfit(pf);
       }//rotate translate
      }//rotate
     }//translate teeth
    }//translate pulley
   }//translate protrusion
  }//vitamins
 
  module lever() {
   translate([0,0,protrusion_h+pulley_elevation+teeth_elevation]) {
    difference() {
     union() {
      hull() {
       place_idler()
       cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
       translate([mount_d/2,0,0])
       cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
      }//hull
      hull() {
       translate([mount_d/2,0,0])
       cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
       translate([mount_d/2,-longwing,0]) rotate([0,90,0])
       cylinder(d=lever_thickness,h=lsd,center=true,$fn=60);