1 files changed, 6 insertions, 2 deletions

diff --git a/another.scad b/another.scad
index 8334b11..1811584 100644
--- a/another.scad
+++ b/another.scad
@@ -21,33 +21,33 @@ module the_extruder(
          pulley_elevation = 1,                  // pulley elevation above the protrusion
  // idler properties
          idler_d = 10, idler_h = 4, idler_id = 3,// idler dimensions: outer and inner diameters and height
  // spring properties
          spring_d = 10, spring_lc = 9.6,        // spring diameter and compressed length
  // filament path properties
  filament_d = 1.75,
  filament_path_d = 2,
          filament_guide_d = 4,                  // PTFE filament guide diameter
  // knob properties
  knob_h = 10,
  knob_indent_d = 4,
  knob_indents = 12,
  knob_v_clearance = 1,
  // spring tensioner
  st_nut_d = 9, st_nut_h = 4,
- st_screw_d = 5,
+ st_screw_d = 5, st_screw_l = 16,
  st_thickshell = 8*extrusion_width, st_thinshell = 2*extrusion_width,
  st_split_w = 4*extrusion_width,
 
  // screw it
  mount_screw_d = 3.1, mount_screw_l = 20,
  mount_screwhead_d=6, mount_screwhead_h=3,
  idler_screw_d = 3,
  idler_screwhead_d=6, idler_screwhead_h=3,
 
  pf = pushfit_metal,
  pf_shell = max(3*layer_height,3*extrusion_width),
 
  // empty spaces
          idler_travel = 3,                      // how far should idler travel when pressed
  idler_clearance=.5,
  pulley_small_d_clearance=.5,
@@ -156,33 +156,37 @@ module the_extruder(
       cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30);
      }//place idler
      // filament path
      rotate([0,0,45]) {
       translate([pulley_d/2-idler_filament_offset,0,0]) rotate([90,0,0]) {
        cylinder(d=filament_d,h=gearbox_d,center=false,$fn=15);
       }//rotate translate
       translate([pulley_d/2+filament_offset,0,0]) rotate([-90,0,0]) {
        cylinder(d=filament_d,h=gearbox_d,center=false,$fn=15);
        translate([0,0,pf_offset])
        pushfit(pf);
       }//rotate translate
      }//rotate
     }//translate teeth
    }//translate pulley
   }//translate protrusion
- }//vitamins
+  // spring tensioner screw
+  translate([-gearbox_d/2,-longwing,ls_z])
+  rotate([0,90,0])
+  cylinder(d=st_screw_d,h=st_screw_l);
+ }//mirrorleft if(vitamins)
 
  module lever() {
   translate([0,0,protrusion_h+pulley_elevation+teeth_elevation]) {
    difference() {
     union() {
      hull() {
       place_idler()
       cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
       translate([mount_d/2,0,0])
       cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
      }//hull
      hull() {
       translate([mount_d/2,0,0])
       cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
       translate([mount_d/2,-longwing,0]) rotate([0,90,0])
       cylinder(d=lever_thickness,h=lsd,center=true,$fn=60);