1 files changed, 17 insertions, 5 deletions

diff --git a/another.scad b/another.scad
index 7e8a45f..342d70c 100644
--- a/another.scad
+++ b/another.scad
@@ -136,37 +136,49 @@ module the_extruder(
     union() {
      hull() {
       place_idler()
       cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
       translate([mount_d/2,0,0])
       cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
      }//hull
      hull() {
       translate([mount_d/2,0,0])
       cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
       translate([mount_d/2,-longwing,0]) rotate([0,90,0])
       cylinder(d=lever_thickness,h=lsd,center=true,$fn=60);
      }//hull
     }//union
  
     // filament path
-    place_idler() translate([-(idler_d+filament_path_d)/2,0,0]) rotate([90,0,0]) {
-     cylinder(d=filament_path_d,h=3*gearbox_d,center=true,$fn=30);
-     translate([0,-filament_path_d/2/sqrt(2),0]) rotate([0,0,45])
-     cube(size=[filament_path_d/2,filament_path_d/2,3*gearbox_d],center=true);
-    }
+    place_idler() {
+     translate([-(idler_d+filament_path_d)/2,0,0]) rotate([90,0,0]) {
+      cylinder(d=filament_path_d,h=3*gearbox_d,center=true,$fn=30);
+      translate([0,-filament_path_d/2/sqrt(2),0]) rotate([0,0,45])
+      cube(size=[filament_path_d/2,filament_path_d/2,3*gearbox_d],center=true);
+     }//rotate translate
+     translate([-(idler_d+filament_path_d)/2,0,0])
+     rotate([90,0,0])
+     translate([0,0,
+      sqrt(2)*(mount_d-pulley_d+filament_path_d+lsd)/2
+     ]) {
+      cylinder(d1=filament_path_d,d2=2*filament_path_d,
+               h=filament_path_d,$fn=2*filament_path_d*fnd);
+      translate([0,0,filament_path_d-epsilon])
+      cylinder(d=2*filament_path_d,h=lsd,$fn=2*filament_path_d*fnd);
+     }
+    }//place_idler
     
     // idler space and mounting hole
     place_idler() {
      difference() {
       cylinder(d=idler_d+idler_clearance*2,h=idler_h+idler_v_tolerance,center=true,$fn=60);
       if(supports) for(y=[-lsd/2+extrusion_width:(lsd-2*extrusion_width)/3:lsd/2-extrusion_width])
        translate([-lsd/2-1,y-extrusion_width/2,-idler_h/2-idler_v_tolerance/2-1])
        cube(size=[lsd+2,extrusion_width,idler_h+idler_v_tolerance+2]);
      }
      cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30);
      translate([0,0,lever_thickness/2-idler_screwhead_h])
      cylinder(d=idler_screwhead_d,h=idler_screwhead_h+1,$fn=fnd*idler_screwhead_d);
     }
     // mounting screw hole
     translate([mount_d/2,0,0])
     cylinder(d=mount_screw_d+mount_screw_d_tolerance,h=lever_thickness+2,center=true,$fn=fnd*mount_screw_d);