| -rw-r--r-- | another.scad | 12 | ||||
| -rw-r--r-- | pulley_data.scad | 8 |
2 files changed, 16 insertions, 4 deletions
diff --git a/another.scad b/another.scad index ed18874..51358ee 100644 --- a/another.scad +++ b/another.scad @@ -6,4 +6,5 @@ $fs=0.0125; use <pushfittery.scad>; include <pushfit_data.scad>; +include <pulley_data.scad>; module the_extruder( @@ -17,8 +18,6 @@ module the_extruder( bore_dd = 7, // pulley properties - pulley_d = 11.5, pulley_h=10, + pulley = pulley_e3d, pulley_elevation = 1, // pulley elevation above the protrusion - teeth_elevation = 7.5, // distance from the bottom of the pulley to its teeth - filament_offset = (8.25-(3.0+3.5)/2) - 11.5/2 + 1.75/2, // idler properties idler_d = 9.5, idler_h = 4, idler_id = 3, // idler dimensions: outer and inner diameters and height @@ -53,5 +52,4 @@ module the_extruder( idler_travel = 3, // how far should idler travel when pressed idler_clearance=1, - pulley_d_clearance=2, pulley_small_d_clearance=0.5, lever_v_clearance=.7, // vertical clearance for the lever @@ -78,5 +76,11 @@ module the_extruder( ) { fnd = 2*PI; fnr = 2*fnd; + function lu(m,k) = m[search([k],m)[0]][1]; + pulley_d = lu(pulley,"d"); + pulley_h = lu(pulley,"h"); + teeth_elevation = lu(pulley,"fe"); + filament_offset = lu(pulley,"g")+filament_d/2; + pulley_d_clearance = lu(pulley,"ssrc")*2; idler_filament_offset = filament_path_d/2; // -filament_offset; lever_shell = mount_screwhead_h+0.5; diff --git a/pulley_data.scad b/pulley_data.scad new file mode 100644 index 0000000..a1523de --- a/dev/null +++ b/pulley_data.scad @@ -0,0 +1,8 @@ +pulley_e3d = [ + ["d", 11.5 ], // outer diameter + ["h", 11 ], // pulley height + ["g", 8.25-3 - 11.5/2 ], // depth of U-groove, filament offset from the surface + ["fe", 7.5 ], // filament elevation from the bottom + ["ssrc", 2 ], // set screw radial clearance +]; + |