| -rw-r--r-- | another.scad | 16 |
1 files changed, 15 insertions, 1 deletions
diff --git a/another.scad b/another.scad index 23243d9..4a9fc01 100644 --- a/another.scad +++ b/another.scad @@ -26,48 +26,49 @@ module the_extruder( spring_d = 10, spring_lc = 9.6, // spring diameter and compressed length // filament path properties filament_d = 1.75, filament_path_d = 2, filament_guide_d = 4, // PTFE filament guide diameter // knob properties knob_h = 10, knob_bore_l = 4, knob_indent_d = 4, knob_indents = 12, // spring tensioner st_nut_d = 9, st_nut_h = 4, st_screw_d = 5, st_thickshell = 8*extrusion_width, st_thinshell = 4*extrusion_width, // screw it mount_screw_d = 3.1, mount_screw_l = 20, mount_screwhead_d=6, mount_screwhead_h=3, idler_screw_d = 3, idler_screwhead_d=6, idler_screwhead_h=3, pf = pushfit_embeddest, pf_shell = max(3*layer_height,3*extrusion_width), pf_smooth = true, + pf_guidelen = 3, // the length of ptfe guide before pushfit // empty spaces idler_travel = 3, // how far should idler travel when pressed idler_clearance=1, pulley_d_clearance=2, lever_v_clearance=.7, // vertical clearance for the lever spring_d_clearance=1, protrusion_tolerance_h=.5, // horizontal tolerance for the motor protrusion protrusion_tolerance_v=.5, // vertical tolerance for the motor protrusion mount_screw_d_tolerance=.4, idler_v_tolerance=.5, knob_bore_d_tolerance=.6, st_nut_h_tolerance=.2, st_nut_d_tolerance=.2,/* TODO: make it st_nut_w_tolerance */ st_screw_d_tolerance=.5, min_z_shell = 4*layer_height, // the very minimal shell thickness along z-axis. what="lever", // lever|body|knob|springpad|* left=false, vitamins = true, supports = false, bridges = true, tensioner = true, debug = false @@ -295,49 +296,62 @@ module the_extruder( }//if(pf_smooth) }//translate rotate translate rotate translate }//union (first child of difference) // protrusion translate([0,0,-1]) cylinder(d=protrusion_d+protrusion_tolerance_h,h=protrusion_h+protrusion_tolerance_v+1,$fn=fnd*(protrusion_d+protrusion_tolerance_h)); // mount screw holes for(zr=[0:90:359]) rotate([0,0,zr]) translate([mount_d/2,0,0]) { translate([0,0,mount_screw_l-mount_depth-(bridges?layer_height:-epsilon)]) mirror([0,0,1]) cylinder(d=mount_screw_d+mount_screw_d_tolerance, h=mount_screw_l-mount_depth+1, $fn=fnd*(mount_screw_d+mount_screw_d_tolerance)); translate([0,0,mount_screw_l-mount_depth]) cylinder(d=mount_screwhead_d,h=body_h+1,$fn=fnd*mount_screwhead_d); }//for // pushfit translate([0,0,filament_elevation]) rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0]) rotate([-90,0,0]) translate([0,0,mount_d/sqrt(2)/2+mount_screw_d+epsilon]) rotate([0,0,180]) { pushfit(pf); - mirror([0,1,0]) teardrop(d=filament_guide_d,h=gearbox_d,center=true); + mirror([0,0,1]) { + translate([0,0,-epsilon]) + teardrop(d=filament_guide_d,h=pf_guidelen+epsilon,angle=225); + nl = 3.5; /* TODO: */ + translate([0,0,pf_guidelen-1]) + teardrop(d=filament_path_d,h=nl+2,angle=-225); + fh = (filament_guide_d-filament_path_d)/2; + union() { + translate([0,0,pf_guidelen+nl]) + cylinder(d1=filament_path_d,d2=filament_guide_d,h=fh,$fn=fnd*filament_guide_d); + translate([0,0,pf_guidelen+nl+fh-epsilon]) + teardrop(d=filament_guide_d,h=gearbox_d/2,angle=225); + } + } }//rotate translate rotate translate rotate translate // pulley cylinder(d=pulley_d+pulley_d_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_d_clearance)); // leverspace hull() for(x=[0,gearbox_d]) rotate([0,0,45]) translate([x,0,ls_z-ls_h/2]) cylinder(d=idler_d+idler_clearance,h=ls_h,$fn=fnd*(idler_d+idler_clearance)); // idler clearance a=cos(45)*(pulley_d+idler_d)/2; b=mount_d/2-a; x=sqrt(pow(a,2)+pow(b,2)); translate([mount_d/2,0,ls_z]) intersection() { r = x+idler_d/2+idler_clearance; cylinder(r=r,h=ls_h,center=true); translate([-r-1,0,-ls_h/2-1]) cube(size=[2*r+2,r+1,ls_h+2]); } // back side cutout // XXX: this is somewhat ugly and potentially bugged, // but I want to sleep. a0_ = atan( |