-rw-r--r-- | another.scad | 8 |
1 files changed, 3 insertions, 5 deletions
diff --git a/another.scad b/another.scad index 0f696cc..05bfab3 100644 --- a/another.scad +++ b/another.scad @@ -376,102 +376,100 @@ module the_extruder( linear_extrude(height=label_thickness+epsilon,convexity=64) translate([-mount_screwhead_d/2-min_xy_shell-labelspace.x/2,-longwing+(st_split_w+st_split_w_tolerance)/2+min_xy_shell+labelspace.y/2]) mirror([left?0:1,0]) text(text=label,size=labelspace.x/label_len,halign="center",valign="center",font="Arial Black"); }//if(body_label) } module springpad() { smalld=st_screw_d+st_screw_d_tolerance+min_xy_shell; bigd = spring_d+spring_d_clearance/2; hf = (bigd-smalld)/2; h = hf*3.5; translate([-gearbox_d/2+st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+1,-longwing,filament_elevation]) rotate([0,90,0]) difference() { union() { cylinder(d1=smalld,d2=bigd,h=hf,$fn=fnd*bigd); translate([0,0,hf-epsilon]) cylinder(d=bigd,h=h-hf,$fn=fnd*bigd); translate([0,0,h]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4); l = body_h-ls_z; w = st_split_w; hull() translate([0,-st_split_w/2,0]) mirror([1,0,0]) { translate([0,0,w]) cube(size=[l,st_split_w,w]); cube(size=[l-w,st_split_w,2*w]); } } translate([0,0,-epsilon]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=2*hf+epsilon,$fn=fnd*(st_screw_d+st_screw_d_tolerance)); } } module knob() { ch = knob_indent_d/2; knob_bore_l = body_h-protrusion_h-pulley_elevation-pulley_h-knob_v_clearance; translate([0,0,body_h+epsilon]) { mirror([0,0,1]) translate([0,0,-epsilon]) { difference() { cylinder(d=pulley_d,h=knob_bore_l,$fn=fnd*pulley_d); translate([0,0,-1]) difference() { cylinder(d=bore_d+knob_bore_d_tolerance,h=knob_bore_l+2); translate([-bore_d/2-1,bore_dd-bore_d/2+knob_bore_d_tolerance/2,-1]) cube([bore_d+2,bore_d/2,knob_bore_l+4]); } } } difference() { - union() { - cylinder(d1=gearbox_d-2*ch,d2=gearbox_d,h=ch+epsilon,$fn=fnd*gearbox_d); + hull() { + cylinder(d=gearbox_d-2*ch,h=knob_h,$fn=fnd*gearbox_d); translate([0,0,ch]) - cylinder(d=gearbox_d,h=knob_h-2*ch+epsilon,$fn=fnd*gearbox_d); - translate([0,0,knob_h-ch]) - cylinder(d1=gearbox_d,d2=gearbox_d-2*ch,h=ch,$fn=fnd*gearbox_d); + cylinder(d=gearbox_d,h=knob_h-2*ch,$fn=fnd*gearbox_d); } for(a=[0:360/knob_indents:359]) rotate([0,0,a]) translate([0,gearbox_d/2,-1]) cylinder(d=knob_indent_d,h=knob_h+2,$fn=fnd*knob_indent_d); } } }//knob module module debug() { difference() { children(); if(debug) { // spring tensioner debug cutout translate([-gearbox_d/2,-longwing,ls_z]) rotate([0,-90,0]) translate([0,-lever_thickness/2-1,-gearbox_d]) cube(size=[body_h/2+1,lever_thickness/2+1,gearbox_d+2]); // lever axis debug cutout translate([mount_d/2,0,-1]) rotate([0,0,-45]) cube(size=[gearbox_d-mount_d,gearbox_d-mount_d,body_h+knob_h+2]); // idler debug cutout translate([0,0,ls_z]) place_idler() rotate([0,0,-45]) translate([0,0,-lever_thickness/2-epsilon]) cube(size=[lsd*sqrt(2)/2+1,lsd*sqrt(2)/2+1, lever_thickness+2*epsilon]); // pushfit debug cutout place_idler() translate([-idler_d/2+filament_offset,0,ls_z]) cube(size=[gearbox_d/2,gearbox_d/2+pf_h(pf),body_h-ls_z+knob_h+1]); }//if debug }//difference } mirrorleft() debug() if(what=="lever") color("green",0.7) lever(); else if(what=="body") color("yellow",0.7) body(); else if(what=="body.label") color("brown",0.7) body_label(); else if(what=="knob") color("red",0.7) knob(); else if(what=="springpad") color("blue",0.7) springpad(); else if(what=="both") { color("green",0.7) lever(); color("yellow",0.7) body(); color("brown",0.7) body_label(); }else{ color("green",0.7) lever(); |