| -rw-r--r-- | another.scad | 10 |
1 files changed, 6 insertions, 4 deletions
diff --git a/another.scad b/another.scad index 03f3bf9..dbd20f3 100644 --- a/another.scad +++ b/another.scad @@ -36,12 +36,14 @@ module the_extruder( st_screw_d = 5, st_thickshell = 8*extrusion_width, st_thinshell = 4*extrusion_width, // screw it mount_screw_d = 3.1, mount_screw_l = 20, mount_screwhead_d=6, mount_screwhead_h=3, + idler_screw_d = 3, + idler_screwhead_d=6, idler_screwhead_h=3, pf = pushfit_embeddest, // empty spaces idler_travel = 3, // how far should idler travel when pressed idler_clearance=1, @@ -110,13 +112,13 @@ module the_extruder( } translate([0,0,pulley_elevation]) { cylinder(d=pulley_d,h=pulley_h,$fn=30); translate([0,0,teeth_elevation]) { place_idler() { cylinder(d=idler_d,h=idler_h,center=true,$fn=30); - cylinder(d=idler_id,h=lever_thickness+2,center=true,$fn=30); + cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30); }//place idler // filament path rotate([0,0,45]) translate([(pulley_d-filament_path_d)/2,0,0]) { rotate([90,0,0]) cylinder(d=filament_d,h=gearbox_d*2,center=true,$fn=15); rotate([-90,0,0]) translate([0,0,mount_d/sqrt(2)/2+mount_screw_d]) @@ -157,15 +159,15 @@ module the_extruder( difference() { cylinder(d=idler_d+idler_clearance*2,h=idler_h+idler_v_tolerance,center=true,$fn=60); if(supports) for(y=[-lsd/2+extrusion_width:(lsd-2*extrusion_width)/3:lsd/2-extrusion_width]) translate([-lsd/2-1,y-extrusion_width/2,-idler_h/2-idler_v_tolerance/2-1]) cube(size=[lsd+2,extrusion_width,idler_h+idler_v_tolerance+2]); } - cylinder(d=mount_screw_d+mount_screw_d_tolerance,h=lever_thickness+2,center=true,$fn=30); - translate([0,0,lever_thickness/2-mount_screwhead_h]) - cylinder(d=mount_screwhead_d,h=mount_screwhead_h+1,$fn=fnd*mount_screwhead_d); + cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30); + translate([0,0,lever_thickness/2-idler_screwhead_h]) + cylinder(d=idler_screwhead_d,h=idler_screwhead_h+1,$fn=fnd*idler_screwhead_d); } // mounting screw hole translate([mount_d/2,0,0]) cylinder(d=mount_screw_d+mount_screw_d_tolerance,h=lever_thickness+2,center=true,$fn=fnd*mount_screw_d); // lever end |