1 files changed, 26 insertions, 7 deletions

diff --git a/another.scad b/another.scad
index 3d804c1..03f3bf9 100644
--- a/another.scad
+++ b/another.scad
@@ -204,17 +204,16 @@ module the_extruder(
        mirror([0,1,0]) cube(size=[fsw,longwing-hh+lever_thickness/sqrt(2),hh+lever_thickness/2]);
        hhh=ls_z;
        translate([0,0,0])
        mirror([0,1,0]) cube(size=[fsw,longwing-hhh+lever_thickness/sqrt(2),hhh+lever_thickness/2]);
       }
      }
      translate([0,-longwing,ls_z]) rotate([0,-90,0]) {
       if(!tensioner) finger_indent(d=lever_thickness-1,r=15); else {
-       if(debug) translate([0,-lever_thickness/2-1,-gearbox_d]) cube(size=[body_h/2+1,lever_thickness/2+1,gearbox_d+2]);
        mirror([0,0,1]) {
         translate([0,0,st_thickshell])
         hull() for(o=[0,spring_d]) translate([0,-o,0])
         rotate([0,0,30])
         cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6);
         translate([0,0,-1]) cylinder(d=st_screw_d,h=fsw+2,$fn=fnd*st_screw_d);
         bigd = spring_d+spring_d_clearance;
         hf = (bigd-st_screw_d)/2;
@@ -305,22 +304,16 @@ module the_extruder(
    //translate([-mount_d/2,-longwing,filament_elevation])
    if(!tensioner) /* XXX: this seems to be bullshit, but it's so old, that it's historical bullshit */
    translate([mount_d/2,-longwing,filament_elevation])
    rotate([0,-90,0]) difference() {
     cylinder(d=spring_d+spring_d_clearance,h=spring_lc+spring_dl,$fn=fnd*(spring_d+spring_d_clearance));
     translate([0,0,spring_lc+spring_dl]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4);
    }
 
-   if(debug) {
-    translate([mount_d/2,0,-1])
-    rotate([0,0,-45])
-    cube(size=[gearbox_d-mount_d,gearbox_d-mount_d,body_h+2]);
-   }
-    
   }//difference
 
   if(supports) intersection() {
    difference() {
     translate([0,0,ls_z-ls_h/2-epsilon])
     cylinder(d=gearbox_d,h=ls_h+2*epsilon,$fn=fnd*gearbox_d);
     cylinder(d=pulley_d+pulley_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_clearance));
    }
@@ -380,16 +373,42 @@ module the_extruder(
     }
     for(a=[0:360/knob_indents:359]) rotate([0,0,a])
      translate([0,gearbox_d/2,-1])
      cylinder(d=knob_indent_d,h=knob_h+2,$fn=fnd*knob_indent_d);
    }
   }
  }//knob module
 
+ module debug() {
+  difference() {
+   children();
+   if(debug) {
+    // spring tensioner debug cutout
+    if(tensioner) // TODO: collaps copypasted transformations
+    translate([-gearbox_d/2,0,0])
+    translate([0,-longwing,ls_z]) rotate([0,-90,0])
+    translate([0,-lever_thickness/2-1,-gearbox_d])
+    cube(size=[body_h/2+1,lever_thickness/2+1,gearbox_d+2]);
+    // lever axis debug cutout
+    translate([mount_d/2,0,-1])
+    rotate([0,0,-45])
+    cube(size=[gearbox_d-mount_d,gearbox_d-mount_d,body_h+knob_h+2]);
+    // idler debug cutout
+    translate([0,0,ls_z])
+    place_idler()
+    rotate([0,0,-45])
+    translate([0,0,-lever_thickness/2-epsilon])
+    cube(size=[(idler_d+idler_clearance)/2,(idler_d+idler_clearance)/2,
+               lever_thickness+2*epsilon]);
+   }//if debug
+  }//difference
+ }
+
+ debug()
  mirrorleft()
  if(what=="lever") color("green",0.7) lever();
  else if(what=="body") color("yellow",0.7) body();
  else if(what=="knob") color("red",0.7) knob();
  else if(what=="springpad") color("blue",0.7) springpad();
  else if(what=="both") {
   color("green",0.7) lever();
   color("yellow",0.7) body();