draft=true;
layer_height=0.2; extrusion_width=0.4;
epsilon=0.01;
$fs=0.0125;

use <pushfittery.scad>;
include <pushfit_data.scad>;

module the_extruder(
 // motor properties
 gearbox_d = 36,
 mount_d = 28,					// the distance between opposite mounting holes
 mounthole_depth = 5,
 protrusion_d = 22, protrusion_h = 2.2,		// the dimensions of the protrusion on top of gearbox
 bore_d = 8, bore_l = 17.6,
 bore_dd = 7,
 // pulley properties
 pulley_d = 11.5, pulley_h=10,
 pulley_elevation = 1,				// pulley elevation above the protrusion
 teeth_elevation = 7.5,				// distance from the bottom of the pulley to its teeth
 // idler properties
 idler_d = 9.5, idler_h = 4, idler_id = 3,	// idler dimensions: outer and inner diameters and height
 // spring properties
 spring_d = 10, spring_lc = 9.6,		// spring diameter and compressed length
 // filament path properties
 filament_d = 1.75,
 filament_path_d = 2,
 filament_guide_d = 4,				// PTFE filament guide diameter
 // knob properties
 knob_h = 10,
 knob_bore_l = 4,
 knob_indent_d = 4,
 knob_indents = 12,
 // spring tensioner
 st_nut_d = 9, st_nut_h = 4,
 st_screw_d = 5,
 st_thickshell = 8*extrusion_width, st_thinshell = 4*extrusion_width,

 // screw it
 mount_screw_d = 3.1, mount_screw_l = 20,
 mount_screwhead_d=6, mount_screwhead_h=3,
 idler_screw_d = 3,
 idler_screwhead_d=6, idler_screwhead_h=3,

 pf = pushfit_embeddest,

 // empty spaces
 idler_travel = 3,				// how far should idler travel when pressed
 idler_clearance=1,
 pulley_clearance=2,
 lever_v_clearance=.7,				// vertical clearance for the lever
 spring_d_clearance=1,
 protrusion_tolerance_h=.5,			// horizontal tolerance for the motor protrusion
 protrusion_tolerance_v=.5,			// vertical tolerance for the motor protrusion
 mount_screw_d_tolerance=.4,
 idler_v_tolerance=.5,
 knob_bore_d_tolerance=.6,
 st_nut_h_tolerance=.2,
 st_nut_d_tolerance=.2,/* TODO: make it st_nut_w_tolerance */

 what="lever",  // lever|body|knob|springpad|*
 left=false,
 vitamins = true,
 supports = false, bridges = true,
 tensioner = true,
 debug = false
) {
 fnd = 2*PI; fnr = 2*fnd;

 lever_shell = mount_screwhead_h+0.5;
 lever_thickness=max(spring_d+spring_d_clearance+layer_height*8,idler_h+idler_v_tolerance+2*lever_shell);
 lsd = idler_d-idler_clearance*2;
 longwing=gearbox_d/2+spring_d/2+lsd/2;
 h_ = (pulley_d+idler_d)/(2*sqrt(2));
 ri = sqrt( pow(h_,2) + pow(mount_d/2-h_,2) );
 spring_dl = idler_travel*longwing/ri;

 filament_elevation=protrusion_h+pulley_elevation+teeth_elevation;
 ls_z = filament_elevation; // leverspace mid-z
 body_h = max(protrusion_h+bore_l,mount_screw_l-mounthole_depth/2+mount_screwhead_h,ls_z*2);
 ls_h = lever_thickness+lever_v_clearance; // leverspace height

 module mirrorleft() {
  mirror([left?0:1,0,0]) children();
 }
 module place_idler() {
  rotate([0,0,45])
  translate([(pulley_d+idler_d)/2,0,0])
  children();
 }
 module finger_indent(d=lever_thickness,depth/*=1*/,r/*=15*/) {
  if(depth) {
   hh = (-4*pow(depth,2)+pow(d,2))/(8*depth);
   rr = depth+hh;
   translate([0,0,hh]) sphere(r=rr,$fn=fnr*rr);
  }else if(r) {
   hh=sqrt(pow(r,2)-pow(d,2)/4);
   translate([0,0,hh]) sphere(r=r,$fn=fnr*r);
  }
 }

 % if(vitamins) mirrorleft() {
  translate([0,0,-epsilon]) mirror([0,0,1]) cylinder(d=gearbox_d,h=1,$fn=60);
  for(zr=[0:90:359]) rotate([0,0,zr]) translate([mount_d/2,0,0])
   cylinder(d=mount_screw_d,h=20,$fn=30);
  translate([0,0,-epsilon]) cylinder(d=protrusion_d,h=protrusion_h,$fn=30);
  translate([0,0,protrusion_h]) {
   difference() {
    cylinder(d=bore_d,h=bore_l,$fn=30);
    translate([-bore_d/2-1,bore_dd-bore_d/2,-1])
    cube([bore_d+2,bore_d/2,bore_l+2]);
   }
   translate([0,0,pulley_elevation]) {
    cylinder(d=pulley_d,h=pulley_h,$fn=30);
    translate([0,0,teeth_elevation]) {
     place_idler() {
      cylinder(d=idler_d,h=idler_h,center=true,$fn=30);
      cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30);
     }//place idler
     // filament path
     rotate([0,0,45]) translate([(pulley_d-filament_path_d)/2,0,0]) {
      rotate([90,0,0]) cylinder(d=filament_d,h=gearbox_d*2,center=true,$fn=15);
      rotate([-90,0,0])
      translate([0,0,mount_d/sqrt(2)/2+mount_screw_d])
      pushfit(pf);
     }
    }//translate teeth
   }//translate pulley
  }//translate protrusion
 }//vitamins

 module lever() {
  translate([0,0,protrusion_h+pulley_elevation+teeth_elevation]) {
   difference() {
    union() {
     hull() {
      place_idler()
      cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
      translate([mount_d/2,0,0])
      cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
     }//hull
     hull() {
      translate([mount_d/2,0,0])
      cylinder(d=lsd,h=lever_thickness,center=true,$fn=60);
      translate([mount_d/2,-longwing,0]) rotate([0,90,0])
      cylinder(d=lever_thickness,h=lsd,center=true,$fn=60);
     }//hull
    }//union
 
    // filament path
    place_idler() translate([-(idler_d+filament_path_d)/2,0,0]) rotate([90,0,0]) {
     cylinder(d=filament_path_d,h=3*gearbox_d,center=true,$fn=30);
     translate([0,-filament_path_d/2/sqrt(2),0]) rotate([0,0,45])
     cube(size=[filament_path_d/2,filament_path_d/2,3*gearbox_d],center=true);
    }
    
    // idler space and mounting hole
    place_idler() {
     difference() {
      cylinder(d=idler_d+idler_clearance*2,h=idler_h+idler_v_tolerance,center=true,$fn=60);
      if(supports) for(y=[-lsd/2+extrusion_width:(lsd-2*extrusion_width)/3:lsd/2-extrusion_width])
       translate([-lsd/2-1,y-extrusion_width/2,-idler_h/2-idler_v_tolerance/2-1])
       cube(size=[lsd+2,extrusion_width,idler_h+idler_v_tolerance+2]);
     }
     cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30);
     translate([0,0,lever_thickness/2-idler_screwhead_h])
     cylinder(d=idler_screwhead_d,h=idler_screwhead_h+1,$fn=fnd*idler_screwhead_d);
    }
    // mounting screw hole
    translate([mount_d/2,0,0])
    cylinder(d=mount_screw_d+mount_screw_d_tolerance,h=lever_thickness+2,center=true,$fn=fnd*mount_screw_d);
    
    // lever end
    translate([mount_d/2,0,0]) rotate([0,90,0]) {
     translate([0,-longwing,lsd/2]) finger_indent(d=lever_thickness-1,r=15);
     translate([0,-longwing,0])
     mirror([0,0,1])
     difference() {
      cylinder(d=spring_d+spring_d_clearance,h=lsd,$fn=fnd*(spring_d+spring_d_clearance));
      sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4);
     }
    }//rotate-translate
   }//difference
   // bridging patch
   if(bridges) place_idler()
   translate([0,0,lever_thickness/2-mount_screwhead_h])
   mirror([0,0,1])
   cylinder(d=mount_screwhead_d,h=layer_height);
  }//translate
 }//lever module
 
 module body() {
  difference() {
   union() {
   cylinder(d=gearbox_d,h=body_h,$fn=fnd*gearbox_d);
    // finger and spring support
    fsw = gearbox_d-(gearbox_d-mount_d)/2-spring_lc;
    translate([-gearbox_d/2,0,0]) difference() {
     union() {
      hull() {
       translate([0,-longwing,ls_z])
       rotate([0,90,0])
       cylinder(d=lever_thickness,h=fsw,$fn=fnd*lever_thickness);
       hh=body_h-ls_z;
       translate([0,0,ls_z-lever_thickness/2])
       mirror([0,1,0]) cube(size=[fsw,longwing-hh+lever_thickness/sqrt(2),hh+lever_thickness/2]);
       hhh=ls_z;
       translate([0,0,0])
       mirror([0,1,0]) cube(size=[fsw,longwing-hhh+lever_thickness/sqrt(2),hhh+lever_thickness/2]);
      }
     }
     translate([0,-longwing,ls_z]) rotate([0,-90,0]) {
      if(!tensioner) finger_indent(d=lever_thickness-1,r=15); else {
       mirror([0,0,1]) {
	translate([0,0,st_thickshell])
	hull() for(o=[0,spring_d]) translate([0,-o,0])
	rotate([0,0,30])
	cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6);
	translate([0,0,-1]) cylinder(d=st_screw_d,h=fsw+2,$fn=fnd*st_screw_d);
	bigd = spring_d+spring_d_clearance;
	hf = (bigd-st_screw_d)/2;
	translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon])
	cylinder(d1=st_screw_d,d2=bigd,
	 h=hf+epsilon, $fn=fnd*bigd);
	translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon])
	cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd);
       }
      }
     }
    } // translate
    
    // pushfit bracket
    translate([0,0,filament_elevation])
    rotate([0,0,45]) translate([pulley_d/2,0,0])
    rotate([-90,0,0])
    translate([0,0,mount_d/sqrt(2)/2+mount_screw_d-gearbox_d/2/*TODO:*/])
    cylinder(r=min(body_h-filament_elevation,filament_elevation)/sin(60)-epsilon,h=pf_h(pf)+gearbox_d/2/*TODO:*/,$fn=6);
   }//union (first child of difference)

   // protrusion
   translate([0,0,-1])
   cylinder(d=protrusion_d+protrusion_tolerance_h,h=protrusion_h+protrusion_tolerance_v+1,$fn=fnd*(protrusion_d+protrusion_tolerance_h));
   // mount screw holes
   for(zr=[0:90:359]) rotate([0,0,zr]) translate([mount_d/2,0,0]) {
    translate([0,0,mount_screw_l-mounthole_depth/2-(bridges?layer_height:-epsilon)])
    mirror([0,0,1])
    cylinder(d=mount_screw_d+mount_screw_d_tolerance,
             h=mount_screw_l-mounthole_depth/2+1,
	     $fn=fnd*(mount_screw_d+mount_screw_d_tolerance));
    translate([0,0,mount_screw_l-mounthole_depth/2])
    cylinder(d=mount_screwhead_d,h=body_h+1,$fn=fnd*mount_screwhead_d);
   }//for
   // pushfit
   translate([0,0,filament_elevation])
   rotate([0,0,45]) translate([pulley_d/2,0,0])
   rotate([-90,0,0])
   translate([0,0,mount_d/sqrt(2)/2+mount_screw_d+epsilon])
   rotate([0,0,180]) {
    pushfit(pf);
    cylinder(d=filament_guide_d,h=gearbox_d,center=true,$fn=fnd*filament_guide_d);
    translate([0,-filament_guide_d/2/sqrt(2),0])
    rotate([0,0,45])
    cube(size=[filament_guide_d/2,filament_guide_d/2,gearbox_d],center=true);
   }//rotate translate rotate translate rotate translate
   // pulley
   cylinder(d=pulley_d+pulley_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_clearance));
   // leverspace
   hull() for(x=[0,gearbox_d])
   rotate([0,0,45])
   translate([x,0,ls_z-ls_h/2])
   cylinder(d=idler_d+idler_clearance,h=ls_h,$fn=fnd*(idler_d+idler_clearance));

   // idler clearance
   a=cos(45)*(pulley_d+idler_d)/2;
   b=mount_d/2-a;
   x=sqrt(pow(a,2)+pow(b,2));
   translate([mount_d/2,0,ls_z])
   intersection() {
    r = x+idler_d/2+idler_clearance;
    cylinder(r=r,h=ls_h,center=true);
    translate([-r-1,0,-ls_h/2-1]) cube(size=[2*r+2,r+1,ls_h+2]);
   }

   // back side cutout
   a0 = asin((mount_screwhead_d+2*extrusion_width)/mount_d);
   a1 = atan((longwing-lever_thickness/2)/(gearbox_d/2));
   translate([0,0,ls_z]) hull() {
    rotate([0,0,-180+a0])
    rotate_extrude(angle=a1-a0)
    translate([0,-ls_h/2])
    square([sqrt(pow(gearbox_d/2,2)+pow(longwing-lever_thickness/2,2))+1,
            ls_h]);
    cylinder(d=bore_d/2/*TODO:recalculate angles based on this,
                         too lazy to do that now*/,
             h=ls_h,center=true);
   }
   
   rotate([0,0,-45])
   translate([0,0,ls_z-ls_h/2])
   cube(size=[gearbox_d,gearbox_d,lever_thickness+lever_v_clearance]);
   translate([0,0,ls_z-ls_h/2]) {
    translate([mount_screwhead_d/2,0,0])
    mirror([0,1,0])
    cube(size=[gearbox_d,gearbox_d/2+1,lever_thickness+lever_v_clearance]);
   }
   //translate([-mount_d/2,-longwing,filament_elevation])
   if(!tensioner) /* XXX: this seems to be bullshit, but it's so old, that it's historical bullshit */
   translate([mount_d/2,-longwing,filament_elevation])
   rotate([0,-90,0]) difference() {
    cylinder(d=spring_d+spring_d_clearance,h=spring_lc+spring_dl,$fn=fnd*(spring_d+spring_d_clearance));
    translate([0,0,spring_lc+spring_dl]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4);
   }

  }//difference

  if(supports) intersection() {
   difference() {
    translate([0,0,ls_z-ls_h/2-epsilon])
    cylinder(d=gearbox_d,h=ls_h+2*epsilon,$fn=fnd*gearbox_d);
    cylinder(d=pulley_d+pulley_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_clearance));
   }
   // supports
   // TODO: hardcoded stuff below…
   if(false) { // parallel
    for(y=[-gearbox_d:4:gearbox_d])
     translate([0,y-extrusion_width/2,0])
     cube(size=[gearbox_d,extrusion_width,body_h]);
   }else{ // radial
    for(zr=[-65:(65+50)/7:50])
     rotate([0,0,zr]) translate([0,-extrusion_width/2,0])
     cube(size=[gearbox_d,extrusion_width,body_h]);
   }
  }

 }//body module

 module springpad() {
  smalld=st_screw_d+2*extrusion_width;
  bigd = spring_d+spring_d_clearance/2;
  hf = (bigd-smalld)/2;
  translate([-gearbox_d/2+st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+1,-longwing,filament_elevation])
  rotate([0,90,0]) difference() {
   union() {
    cylinder(d1=smalld,d2=bigd,h=hf,$fn=fnd*bigd);
    translate([0,0,hf-epsilon])
    cylinder(d=bigd,h=hf*2,$fn=fnd*bigd);
    translate([0,0,3*hf])
    sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4);
   }
   translate([0,0,-epsilon])
   cylinder(d=st_screw_d,h=2*hf+epsilon,$fn=fnd*st_screw_d);
  }
 }

 module knob() {
  ch = knob_indent_d/2;
  translate([0,0,body_h+epsilon]) {
   mirror([0,0,1]) translate([0,0,-epsilon]) {
    difference() {
     cylinder(d=pulley_d,h=knob_bore_l,$fn=fnd*pulley_d);
     translate([0,0,-1]) difference() {
      cylinder(d=bore_d+knob_bore_d_tolerance,h=knob_bore_l+2);
      translate([-bore_d/2-1,bore_dd-bore_d/2+knob_bore_d_tolerance/2,-1])
      cube([bore_d+2,bore_d/2,knob_bore_l+4]);
     }
    }
   }
   difference() {
    union() {
     cylinder(d1=gearbox_d-2*ch,d2=gearbox_d,h=ch+epsilon,$fn=fnd*gearbox_d);
     translate([0,0,ch])
     cylinder(d=gearbox_d,h=knob_h-2*ch+epsilon,$fn=fnd*gearbox_d);
     translate([0,0,knob_h-ch])
     cylinder(d1=gearbox_d,d2=gearbox_d-2*ch,h=ch,$fn=fnd*gearbox_d);
    }
    for(a=[0:360/knob_indents:359]) rotate([0,0,a])
     translate([0,gearbox_d/2,-1])
     cylinder(d=knob_indent_d,h=knob_h+2,$fn=fnd*knob_indent_d);
   }
  }
 }//knob module

 module debug() {
  difference() {
   children();
   if(debug) {
    // spring tensioner debug cutout
    if(tensioner) // TODO: collaps copypasted transformations
    translate([-gearbox_d/2,0,0])
    translate([0,-longwing,ls_z]) rotate([0,-90,0])
    translate([0,-lever_thickness/2-1,-gearbox_d])
    cube(size=[body_h/2+1,lever_thickness/2+1,gearbox_d+2]);
    // lever axis debug cutout
    translate([mount_d/2,0,-1])
    rotate([0,0,-45])
    cube(size=[gearbox_d-mount_d,gearbox_d-mount_d,body_h+knob_h+2]);
    // idler debug cutout
    translate([0,0,ls_z])
    place_idler()
    rotate([0,0,-45])
    translate([0,0,-lever_thickness/2-epsilon])
    cube(size=[(idler_d+idler_clearance)/2,(idler_d+idler_clearance)/2,
               lever_thickness+2*epsilon]);
   }//if debug
  }//difference
 }

 debug()
 mirrorleft()
 if(what=="lever") color("green",0.7) lever();
 else if(what=="body") color("yellow",0.7) body();
 else if(what=="knob") color("red",0.7) knob();
 else if(what=="springpad") color("blue",0.7) springpad();
 else if(what=="both") {
  color("green",0.7) lever();
  color("yellow",0.7) body();
 }else{
  color("green",0.7) lever();
  color("yellow",0.7) body();
  color("red",0.7) knob();
  color("blue",0.7) springpad();
 }
}

the_extruder(what="both",left=false);