smaller heater clearance for dual hotend

1 files changed, 4 insertions, 2 deletions

diff --git a/fanduct.scad b/fanduct.scad
index a18ce56..132b9e8 100644
--- a/fanduct.scad
+++ b/fanduct.scad
@@ -11,28 +11,30 @@ nozzles_apart = 18;		// distance between nozzles for dual hotend
 space_behind_nozzle = 10;	// space behind the nozzle where we're allowed to go
 				// without the fear of hitting carriage
 
 inlet_w = 12.5;		// inlet width
 inlet_h = 17;		// inlet height
 inlet_short_l = 7;	// inlet length of protrusion (or depth of intrusion:))
 inlet_away = 15;	// how far away inlet is
 
 inlet_long_l = inlet_short_l+inlet_h;
 function hypothenuse(a,b) = sqrt(pow(a,2)+pow(b,2));
 
 silicone_shell = 2;
-heater_clearance = max(
+heater_clearance = dual
+       ? max(20,15.5) - 4.5 + silicone_shell
+       : max(
 	hypothenuse(16/2     +silicone_shell, 20-4.5 +silicone_shell),	// E3D v6
 	hypothenuse(11.5-4.5 +silicone_shell, 15.5   +silicone_shell)	// E3D volcano
-);
+       );
 
 fanduct_elevation = 3;							// fanduct elevation above nozzle tip
 fanduct_blowtarget = -2;						// what to blow at
 fanduct_h = 6;								// inner height of the duct
 fanduct_w = 7;								// inner width of the duct
 fanduct_shell=1.2;							// shell thickness
 fanduct_ir = heater_clearance+5;					// inner radius
 
 jet_angle = 60-2;		// angular width of the jet
 
 hotend_clearance = heater_clearance;