| author | Michael Krelin <hacker@klever.net> | 2016-06-11 13:58:06 (UTC) |
|---|---|---|
| committer | Michael Krelin <hacker@klever.net> | 2016-06-11 13:58:06 (UTC) |
| commit | 81e4c02f584b5404628cda56502d0eedbc93b8f1 (patch) (unidiff) | |
| tree | bec4d3946792e8f279508e2b48b7092d72da6829 | |
| parent | 386ace1e4c55753b4bda2b674e34005d3c1f01e4 (diff) | |
| download | fanductory-81e4c02f584b5404628cda56502d0eedbc93b8f1.zip fanductory-81e4c02f584b5404628cda56502d0eedbc93b8f1.tar.gz fanductory-81e4c02f584b5404628cda56502d0eedbc93b8f1.tar.bz2 | |
make hotend clearance as big as heater clearance
| -rw-r--r-- | fanduct.scad | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/fanduct.scad b/fanduct.scad index 975f1cc..53630a3 100644 --- a/fanduct.scad +++ b/fanduct.scad | |||
| @@ -22,13 +22,13 @@ jet_angle = 60-2; // angular width of the jet | |||
| 22 | 22 | ||
| 23 | inlet_w = 12.5; // inlet width | 23 | inlet_w = 12.5; // inlet width |
| 24 | inlet_h = 17; // inlet height | 24 | inlet_h = 17; // inlet height |
| 25 | inlet_l = 7; // inlet length of protrusion (or depth of intrusion:)) | 25 | inlet_l = 7; // inlet length of protrusion (or depth of intrusion:)) |
| 26 | inlet_away = 15;// how far away inlet is | 26 | inlet_away = 15;// how far away inlet is |
| 27 | 27 | ||
| 28 | hotend_clearance = 12; | 28 | hotend_clearance = heater_clearance; |
| 29 | 29 | ||
| 30 | snapper_d = 8; snapper_overlap=0.2;// snip snap | 30 | snapper_d = 8; snapper_overlap=0.2;// snip snap |
| 31 | 31 | ||
| 32 | smooth_f = 120; | 32 | smooth_f = 120; |
| 33 | 33 | ||
| 34 | type="3jets"; // "3jets" ; // circular|3jets | 34 | type="3jets"; // "3jets" ; // circular|3jets |