| author | Michael Krelin <hacker@klever.net> | 2016-05-30 22:59:27 (UTC) |
|---|---|---|
| committer | Michael Krelin <hacker@klever.net> | 2016-05-30 22:59:27 (UTC) |
| commit | d2f2c94ddbbf6c00b6ea89257f8f3e242f9216bd (patch) (side-by-side diff) | |
| tree | 9a46be41f0f7f953ea1c3bb24c2f740f279fcefc | |
| parent | 045e95f7882a47bd5dc017705f6743a61e6a5214 (diff) | |
| download | fanductory-d2f2c94ddbbf6c00b6ea89257f8f3e242f9216bd.zip fanductory-d2f2c94ddbbf6c00b6ea89257f8f3e242f9216bd.tar.gz fanductory-d2f2c94ddbbf6c00b6ea89257f8f3e242f9216bd.tar.bz2 | |
widen duct a bit
| -rw-r--r-- | fanduct.scad | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/fanduct.scad b/fanduct.scad index b8994d4..7fc1ff4 100644 --- a/fanduct.scad +++ b/fanduct.scad @@ -6,13 +6,13 @@ epsilon=.005; // for finer cuts heater_w = 16; // heatblock width heater_l = 20; // heatblock length nozzle_offset=4.5; // nozzle offset from the edge of heatblock fanduct_elevation = 3; // fanduct elevation above nozzle tip fanduct_h = 6; // inner height of the duct -fanduct_w = 6; // inner width of the duct +fanduct_w = 7; // inner width of the duct fanduct_shell=1.2; // shell thickness fanduct_ir = sqrt(pow(heater_w/2,2)+pow(heater_l-nozzle_offset,2))+5; // inner radius jet_angle = 60; // angular width of the jet inlet_w = 12.5; // inlet width |