| -rw-r--r-- | fanduct.scad | 96 |
1 files changed, 66 insertions, 30 deletions
diff --git a/fanduct.scad b/fanduct.scad index 3e2a15e..b9689c9 100644 --- a/fanduct.scad +++ b/fanduct.scad @@ -29,44 +29,80 @@ inlet_long_l = inlet_short_l+inlet_h; hotend_clearance = heater_clearance; +nozzles_apart = 18; // distance between nozzles for dual hotend +space_behind_nozzle = 15; // space behind the nozzle where we're allowed to go + // without the fear of hitting carriage + snapper_d = 8; snapper_overlap=0.2; // snip snap smooth_f = 120; -type="3jets"; // "3jets" ; // circular|3jets -ductshape="square"; // square|round - +type="circular"; // circular|3jets +ductshape="square"; // square|round +dual=true; // dual or single -module fanduct(type=type,ductshape=ductshape) { +to_midduct = fanduct_ir+fanduct_shell+fanduct_w/2; +dual_spots = [ [+space_behind_nozzle, -(to_midduct+nozzles_apart/2)], + [- to_midduct, -(to_midduct+nozzles_apart/2)], + [- to_midduct, 0] ]; +module fanduct(type=type,ductshape=ductshape,dual=dual) { // *** duct is all around! module duct(what) { - if(what=="in") { - sh = fanduct_w+2*fanduct_shell; sv = fanduct_h+2*fanduct_shell; - smax = max(sh,sv); - rotate_extrude($fn=smooth_f) - if(ductshape=="round") - translate([sh/2+fanduct_ir,sv/2]) - scale([sh/smax,sv/smax]) - circle(d=smax,$fn=4*smax); - else if(ductshape=="square") - translate([fanduct_ir,0]) - square([sh,sv]); - }else if(what=="out") { - sh = fanduct_w; sv = fanduct_h; - smax = max(sh,sv); - rotate_extrude($fn=smooth_f) - if(ductshape=="round") - translate([sh/2+fanduct_shell+fanduct_ir,sv/2+fanduct_shell]) - scale([sh/smax,sv/smax]) - circle(d=smax,$fn=4*smax); - else if(ductshape=="square") - translate([fanduct_ir+fanduct_shell,fanduct_shell]) - union() { - square([sh,sv/2]); - translate([sh/2,sv/2]) + module single() { + if(what=="in") { + sh = fanduct_w+2*fanduct_shell; sv = fanduct_h+2*fanduct_shell; + smax = max(sh,sv); + rotate_extrude($fn=smooth_f) + if(ductshape=="round") + translate([sh/2+fanduct_ir,sv/2]) scale([sh/smax,sv/smax]) - circle(d=smax,$fn=36); - } + circle(d=smax,$fn=4*smax); + else if(ductshape=="square") + translate([fanduct_ir,0]) + square([sh,sv]); + }else if(what=="out") { + sh = fanduct_w; sv = fanduct_h; + smax = max(sh,sv); + rotate_extrude($fn=smooth_f) + if(ductshape=="round") + translate([sh/2+fanduct_shell+fanduct_ir,sv/2+fanduct_shell]) + scale([sh/smax,sv/smax]) + circle(d=smax,$fn=4*smax); + else if(ductshape=="square") + translate([fanduct_ir+fanduct_shell,fanduct_shell]) + union() { + square([sh,sv/2]); + translate([sh/2,sv/2]) + scale([sh/smax,sv/smax]) + circle(d=smax,$fn=36); + } + } + } + module dual() { + module hulls(spots=dual_spots) { + for(my=[0,1]) mirror([0,my,0]) for(pn=[0:1:len(spots)-2]) hull() { + for(p=[spots[pn],spots[pn+1]]) translate(p) children(); + } + } + if(what=="in") { + hulls() cylinder(d=fanduct_w+2*fanduct_shell,h=fanduct_h+2*fanduct_shell); + }else if(what=="out") { + sh = fanduct_w; sv = fanduct_h; + smax = max(sh,sv); + translate([0,0,fanduct_shell]) hulls() { + cylinder(d=fanduct_w,h=fanduct_h/2); + translate([0,0,fanduct_h/2]) + scale([sh/smax,sh/smax,sv/smax]) + intersection() { + sphere(d=smax,$fn=36); + translate([0,0,-1]) + cylinder(d=smax+2,h=smax+2,$fn=36); + } + } + } } + + if(dual) dual(); + else single(); } |