1 files changed, 14 insertions, 14 deletions

diff --git a/fanduct.scad b/fanduct.scad
index 302ea07..a18ce56 100644
--- a/fanduct.scad
+++ b/fanduct.scad
@@ -4,4 +4,18 @@ extrusion_width=.5; layer_height=.2;		// print parameters
         epsilon=.005;   // for finer cuts
 
+        type="circular"; // circular|3jets
+        ductshape="square"; // square|round
+        dual=true;      // dual or single
+
+        nozzles_apart = 18;     // distance between nozzles for dual hotend
+        space_behind_nozzle = 10;// space behind the nozzle where we're allowed to go
+                                // without the fear of hitting carriage
+
+        inlet_w = 12.5;         // inlet width
+        inlet_h = 17;   // inlet height
+        inlet_short_l = 7;// inlet length of protrusion (or depth of intrusion:))
+        inlet_away = 15;// how far away inlet is
+
+inlet_long_l = inlet_short_l+inlet_h;
 function hypothenuse(a,b) = sqrt(pow(a,2)+pow(b,2));
 
@@ -21,24 +35,10 @@ fanduct_ir = heater_clearance+5;					// inner radius
         jet_angle = 60-2;       // angular width of the jet
 
-        inlet_w = 12.5;         // inlet width
-        inlet_h = 17;   // inlet height
-        inlet_short_l = 7;// inlet length of protrusion (or depth of intrusion:))
-        inlet_away = 15;// how far away inlet is
-
-inlet_long_l = inlet_short_l+inlet_h;
 hotend_clearance = heater_clearance;
 
-        nozzles_apart = 18;     // distance between nozzles for dual hotend
-        space_behind_nozzle = 10;// space behind the nozzle where we're allowed to go
-                                // without the fear of hitting carriage
-
         snapper_d = 8; snapper_overlap=0.2;// snip snap
 
 smooth_f = 120;
 
-        type="circular"; // circular|3jets
-        ductshape="square"; // square|round
-        dual=false;     // dual or single
-
 to_midduct = fanduct_ir+fanduct_shell+fanduct_w/2;
 dual_spots = [ [+space_behind_nozzle, -(to_midduct+nozzles_apart/2)],