| -rw-r--r-- | fanduct.scad | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/fanduct.scad b/fanduct.scad index f5a7b7a..da89aac 100644 --- a/fanduct.scad +++ b/fanduct.scad @@ -183,97 +183,97 @@ module fanduct(type=type,ductshape=ductshape,dual=dual) { difference() { for(a=[0:120:359]) rotate([0,0,a]) { if(what=="in") { hull() { intersection() { translate([md-fanduct_w/2,-jww/2,0]) cube(size=[fanduct_shell+fanduct_w/2,jww,od]); duct(what=what); } translate([0,0,-fanduct_elevation]) sphere(r=.5); } }else if(what=="out") { hull() { intersection() { translate([md-fanduct_w/2,-jww/2+fanduct_shell,fanduct_shell]) cube(size=[fanduct_w/2,jww-2*fanduct_shell,od-2*fanduct_shell]); duct(what=what); } translate([0,0,-fanduct_elevation]) sphere(r=.2); } } } if(what=="in") { translate([0,0,-fanduct_elevation-2+epsilon]) cylinder(r=fanduct_ir+fanduct_shell*2+fanduct_w+1,h=fanduct_elevation+2); translate([0,0,-hotend_clearance]) rotate([0,0,30]) cylinder(r1=hotend_clearance*2,r2=0,h=hotend_clearance*2,$fn=6); } } } module dual(what=what) { module hulls(spots=dual_spots) { for(my=[0,1]) mirror([0,my,0]) for(pn=[0:1:len(spots)-2]) hull() { for(p=[spots[pn],spots[pn+1]]) translate(p) children(0); children([1:$children-1]); } } if(what=="in") { difference() { hulls() { cylinder(d=fanduct_w+2*fanduct_shell,h=2*fanduct_shell+fanduct_h/2); translate([0,-nozzles_apart/2,-fanduct_elevation-fanduct_blowtarget]) sphere(d=.1); } translate([0,0,epsilon]) hull() for(my=[0:1]) mirror([0,my,0]) for(s=dual_spots) translate(s) mirror([0,0,1]) cylinder(d=fanduct_w+2*fanduct_shell+2,h=fanduct_elevation-fanduct_blowtarget+1); for(s=[-1,1]) translate([0,s*nozzles_apart/2,-1]) - cylinder(r=hotend_clearance,h=fanduct_h+2*fanduct_shell+2,$fn=smooth_f); + rotate([0,0,45]) cylinder(r=hotend_clearance,h=fanduct_h+2*fanduct_shell+2,$fn=4); } }else if(what=="out") { hulls() { translate([0,0,fanduct_shell]) cylinder(d=fanduct_w,h=fanduct_h/2-fanduct_shell/2); translate([0,-nozzles_apart/2,-fanduct_elevation+fanduct_blowtarget]) sphere(d=.1); } }else if(what=="airguides") { far = fanduct_ir+fanduct_shell+fanduct_w; near = fanduct_ir; union() { for(my=[0,1]) mirror([0,my,0]) { guideline([ [-far ,0], [0,0] ]); guideline([ [-far ,inlet_w/2/4], [-near ,nozzles_apart/2] ]); guideline([ [-near-fanduct_w/3,nozzles_apart/2+near+fanduct_w/3] ]); guideline([ [0 ,nozzles_apart/2+near+fanduct_w/2] ]); } } } } if(dual) dual(what); else if(type=="circular") circus(what); else if(type=="3jets") jets(what); } // *** air intake module intake(what) { module placeit() { translate([-fanduct_ir-2*fanduct_shell-fanduct_w-inlet_away,0,fanduct_shell]) rotate([0,-90,0]) children(); } if(what=="in") { placeit() translate([0,-inlet_w/2,0]) { difference() { cube(size=[inlet_h,inlet_w,inlet_long_l+fanduct_shell]); translate([inlet_h+fanduct_shell,0,inlet_long_l+fanduct_shell]) rotate([-90,0,0]) translate([0,0,-1]) cylinder(r=inlet_h,h=inlet_w+2*fanduct_shell+2,$fn=inlet_h*4); } // supports for(i=[-1,0,1]) translate([-fanduct_shell, (i+1)*(inlet_w-extrusion_width)/2, -inlet_away-fanduct_w/2]) cube(size=[fanduct_shell, |