more configuration

1 files changed, 17 insertions, 0 deletions

diff --git a/delta.jscad b/delta.jscad
index 5be6715..fd36ba5 100644
--- a/delta.jscad
+++ b/delta.jscad
@@ -1,56 +1,73 @@
 var PRINT = {
  layer_height: 0.2,
  extrusion_width: 0.4,
 
  fit_tolerance: .2, slide_tolerance: .4, play_tolerance: .6
 };
 
 var CONFIG = {
+ side: {
+  el: 240,		// side extrusion length
+  tl: 240+2*70,		// triangle side length
+  gap: 9		// vertical gap between side extrusions
+ },
+ column: {
+  h: 600		// column height
+ },
+ heatbed: {
+  r: 220/2,		// heatbed radius
+  sr: 220/2-4.5,	// radius of the screwholes circle
+  h: 3+1.5		// thickness (including insulation)
+ },
+ glass: {
+  r: 195/2,		// glass radius
+  h: 3			// glass thickness
+ },
  hotend: {
   h: 62.4, 			// full assembly height
   groove: { d:12, h:6 }, 	// grove diameter and height
   ungroove: { d:16, above:3.7, below: 3+4 }
  },
  effector: {
   h: 6,
   o: 20,	// offset to the rod mounts line
   rods_apart: 40,
   cone: { shell: 1, angle: Math.PI/6 },
   rodend: {
    joint_w: 7,	// thickness of the joint
    screw_l: 20-1, // 20 with the head
    screw_d: 3
   },
   hotend: { margin: 2 },
   hinge: {
    d: 3, w: 5, margin: 2.5,
    h: 1+(6+3.7)/2, // elevation + grove + top
    e: 1 // elevation
   },
   clamp: {
    shell: 4.6,
    d: 3,
    margin: 2.5,
    split: 0.6
   },
   mswitch: {
    size: [ 19.8, 6, 10 ],
    screw: {
     d: 2, h: 10/2-2,
     s: 1.3, // screw shell
     o: [-9.5/2,9.5/2].map(function(x) {
      return -19.8/2+x;
     })
    },
    switch_x: 2.5
   },
   guide: {
    width: 3, height: 5+1, length: 6
   },
   fanholder: {
    r: 30,
    screw: { d: 3, m: 2.5/*margin*/ },
    w: 3
   }
  },
  nut: { h: 2.3, w: 5.5 }