| -rw-r--r-- | delta.jscad | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/delta.jscad b/delta.jscad index f87b778..4716875 100644 --- a/delta.jscad +++ b/delta.jscad @@ -1,90 +1,95 @@ var PRINT = { layer_height: 0.2, extrusion_width: 0.4, fit_tolerance: .2, slide_tolerance: .4, play_tolerance: .6 }; var CONFIG = { extrusion: { w: 20, slotdepth: 6 }, base: { el: 240, // side extrusion length sl: 240+2*70, // triangle side length gap: 9 // vertical gap between side extrusions }, column: { h: 600 // column height }, heatbed: { r: 220/2, // heatbed radius sr: 220/2-4.5, // radius of the screwholes circle h: 3+1.5 // thickness (including insulation) }, glass: { r: 195/2, // glass radius h: 3 // glass thickness }, duet: { pcb_size: { x: 124, y: 100, z: 1 }, hole_spacing: { x: 115, y: 92 }, h: 30 }, foot: { d: 20*Math.sqrt(2), h: 30, bolt: { d:5, l: 19, hd: 10 }, margin: 2.5, nut: { d: 8.6 /* TODO: */, h: 3.5 }, shell: 4, zscalefactor: 1.6, foot: { ho: 2.5, hi: 5 } }, + duetholder: { + bolt: { d: 3, l: 10, head: { d: 5.33, h: 3 } }, + margin: 3, + s: 2.5 + }, hotend: { h: 62.4, // full assembly height groove: { d:12, h:6 }, // grove diameter and height ungroove: { d:16, above:3.7, below: 3+4 } }, effector: { h: 6, o: 20, // offset to the rod mounts line rods_apart: 40, cone: { shell: 1, angle: Math.PI/6 }, rodend: { joint_w: 7, // thickness of the joint screw_l: 20-1, // 20 with the head screw_d: 3 }, hotend: { margin: 2 }, hinge: { d: 3, w: 5, margin: 2.5, h: 1+(6+3.7)/2, // elevation + grove + top e: 1 // elevation }, clamp: { shell: 4.6, d: 3, margin: 2.5, split: 0.6 }, mswitch: { size: [ 19.8, 6, 10 ], screw: { d: 2, h: 10/2-2, s: 1.3, // screw shell o: [-9.5/2,9.5/2].map(function(x) { return -19.8/2+x; }) }, switch_x: 2.5 }, guide: { width: 3, height: 5+1, length: 6 }, fanholder: { r: 30, screw: { d: 3, m: 2.5/*margin*/ }, w: 3 } }, nut: { h: 2.3, w: 5.5 }, |