bugfix: KListView did not recognize singleclicks

2 files changed, 65 insertions, 30 deletions

diff --git a/microkde/kdeui/klistview.cpp b/microkde/kdeui/klistview.cpp
index 3c809b4..32483bb 100644
--- a/microkde/kdeui/klistview.cpp
+++ b/microkde/kdeui/klistview.cpp
@@ -262,981 +262,1002 @@ static QListViewItem *lastQChild (QListViewItem *pi)
 		 */
 		for (QListViewItem *pt = pi->nextSibling(); pt; pt = pt->nextSibling())
 			pi = pt;
 	}
 
 	return pi;
 }
 /*US
 void KListViewLineEdit::selectNextCell (QListViewItem *pitem, int column, bool forward)
 {
 	const int ncols = p->columns();
 	const int dir = forward ? +1 : -1;
 	const int restart = forward ? 0 : (ncols - 1);
 	QListViewItem *top = (pitem && pitem->parent())
 		? pitem->parent()->firstChild()
 		: p->firstChild();
 	QListViewItem *pi = pitem;
 
 	terminate();		//	Save current changes
 
 	do
 	{
 */  
 		/*	Check the rest of the current row for an editable column,
 		 *	if that fails, check the entire next/previous row. The
 		 *	last case goes back to the first item in the current branch
 		 *	or the last item in the current branch depending on the
 		 *	direction.
 		 */
 /*US     
 		if ((column = nextCol(p, pi, column + dir, dir)) != -1 ||
 			(column = nextCol(p, (pi = (forward ? pi->nextSibling() : prevItem(pi))), restart, dir)) != -1 ||
 			(column = nextCol(p, (pi = (forward ? top : lastQChild(pitem))), restart, dir)) != -1)
 		{
 			if (pi)
 			{
 				p->setCurrentItem(pi);		//	Calls terminate
 				p->rename(pi, column);
 */
 				/*	Some listviews may override rename() to
 				 *	prevent certain items from being renamed,
 				 *	if this is done, [m_]item will be NULL
 				 *	after the rename() call... try again.
 				 */
 /*US         
 				if (!item)
 					continue;
 
 				break;
 			}
 		}
 	}
 	while (pi && !item);
 }
 */
 
 /*US
 #ifdef KeyPress
 #undef KeyPress
 #endif
 
 bool KListViewLineEdit::event (QEvent *pe)
 {
 	if (pe->type() == QEvent::KeyPress)
 	{
 		QKeyEvent *k = (QKeyEvent *) pe;
 
 	    if ((k->key() == Qt::Key_Backtab || k->key() == Qt::Key_Tab) &&
 			p->tabOrderedRenaming() && p->itemsRenameable() &&
 			!(k->state() & ControlButton || k->state() & AltButton))
 		{
 			selectNextCell(item, col,
 				(k->key() == Key_Tab && !(k->state() & ShiftButton)));
 			return true;
 	    }
 	}
 
 	return KLineEdit::event(pe);
 }
 
 void KListViewLineEdit::keyPressEvent(QKeyEvent *e)
 {
 	if(e->key() == Qt::Key_Return || e->key() == Qt::Key_Enter )
 		terminate(true);
 	else if(e->key() == Qt::Key_Escape)
 		terminate(false);
         else if (e->key() == Qt::Key_Down || e->key() == Qt::Key_Up)
         {
 		terminate(true);
                 KLineEdit::keyPressEvent(e);
         }
 	else
 		KLineEdit::keyPressEvent(e);
 }
 
 void KListViewLineEdit::terminate()
 {
     terminate(true);
 }
 
 void KListViewLineEdit::terminate(bool commit)
 {
     if ( item )
     {
         //kdDebug() << "KListViewLineEdit::terminate " << commit << endl;
         if (commit)
             item->setText(col, text());
         int c=col;
         QListViewItem *i=item;
         col=0;
         item=0;
         hide(); // will call focusOutEvent, that's why we set item=0 before
         emit done(i,c);
     }
 }
 
 void KListViewLineEdit::focusOutEvent(QFocusEvent *ev)
 {
     QFocusEvent * focusEv = static_cast<QFocusEvent*>(ev);
     // Don't let a RMB close the editor
     if (focusEv->reason() != QFocusEvent::Popup && focusEv->reason() != QFocusEvent::ActiveWindow)
         terminate(true);
 }
 
 void KListViewLineEdit::paintEvent( QPaintEvent *e )
 {
     KLineEdit::paintEvent( e );
 
     if ( !frame() ) {
         QPainter p( this );
         p.setClipRegion( e->region() );
         p.drawRect( rect() );
     }
 }
 
 // selection changed -> terminate. As our "item" can be already deleted,
 // we can't call terminate(false), because that would emit done() with
 // a dangling pointer to "item".
 void KListViewLineEdit::slotSelectionChanged()
 {
     item = 0;
     col = 0;
     hide();
 }
 */
 
 KListView::KListView( QWidget *parent, const char *name )
   : QListView( parent, name ),
         d (new KListViewPrivate (this))
 {
 #ifndef DESKTOP_VERSION
     QPEApplication::setStylusOperation( viewport(), QPEApplication::RightOnHold );
 #endif
 //US  setDragAutoScroll(true);
 
   connect( this, SIGNAL( onViewport() ),
                    this, SLOT( slotOnViewport() ) );
   connect( this, SIGNAL( onItem( QListViewItem * ) ),
                    this, SLOT( slotOnItem( QListViewItem * ) ) );
 
   connect (this, SIGNAL(contentsMoving(int,int)),
                    this, SLOT(cleanDropVisualizer()));
   connect (this, SIGNAL(contentsMoving(int,int)),
                    this, SLOT(cleanItemHighlighter()));
 
 /*US
   slotSettingsChanged(KApplication::SETTINGS_MOUSE);
   
   if (kapp)
   {
     connect( kapp, SIGNAL( settingsChanged(int) ), SLOT( slotSettingsChanged(int) ) );
     kapp->addKipcEventMask( KIPC::SettingsChanged );
   }
 */
   slotSettingsChanged(1); //US do this to initialize the connections 
 
 
   connect(&d->autoSelect, SIGNAL( timeout() ),
                   this, SLOT( slotAutoSelect() ) );
   connect(&d->dragExpand, SIGNAL( timeout() ),
                   this, SLOT( slotDragExpand() ) );
 
   // context menu handling
   if (d->showContextMenusOnPress)
         {
           connect (this, SIGNAL (rightButtonPressed (QListViewItem*, const QPoint&, int)),
                            this, SLOT (emitContextMenu (QListViewItem*, const QPoint&, int)));
         }
   else
         {
           connect (this, SIGNAL (rightButtonClicked (QListViewItem*, const QPoint&, int)),
                            this, SLOT (emitContextMenu (QListViewItem*, const QPoint&, int)));
         }
 
   connect (this, SIGNAL (menuShortCutPressed (KListView*, QListViewItem*)),
                    this, SLOT (emitContextMenu (KListView*, QListViewItem*)));
   
  
   //qDebug("KListView::KListView make alternate color configurable");  
 //US  d->alternateBackground = KGlobalSettings::alternateBackgroundColor();
   d->alternateBackground = QColor(240, 240, 240);
 }
 
 
 
 KListView::~KListView()
 {
   delete d;
 }
 
 bool KListView::isExecuteArea( const QPoint& point )
 {
   if ( itemAt( point ) )
     return isExecuteArea( point.x() );
 
   return false;
 }
 
 bool KListView::isExecuteArea( int x )
 {
   if( allColumnsShowFocus() )
     return true;
   else {
     int offset = 0;
     int width = columnWidth( 0 );
     int pos = header()->mapToIndex( 0 );
 
     for ( int index = 0; index < pos; index++ )
       offset += columnWidth( header()->mapToSection( index ) );
 
     x += contentsX(); // in case of a horizontal scrollbar
     return ( x > offset && x < ( offset + width ) );
   }
 }
 
 void KListView::slotOnItem( QListViewItem *item )
 {
   QPoint vp = viewport()->mapFromGlobal( QCursor::pos() );
   if ( item && isExecuteArea( vp.x() ) && (d->autoSelectDelay > -1) && d->bUseSingle ) {
     d->autoSelect.start( d->autoSelectDelay, true );
     d->pCurrentItem = item;
   }
 }
 
 void KListView::slotOnViewport()
 {
   if ( d->bChangeCursorOverItem )
     viewport()->unsetCursor();
 
   d->autoSelect.stop();
   d->pCurrentItem = 0L;
 }
 
 void KListView::slotSettingsChanged(int category)
 {
     //qDebug("KListView::slotSettingsChanged has to be verified");
-/*US
+
 
   switch (category)
   {
+    //US I create my private category (=1) to set the settings
+  case 1:
+    d->dragDelay = 2;
+    //US set explicitly d->bUseSingle = KGlobalSettings::singleClick();
+    qDebug("KListView::slotSettingsChanged: single%i", d->bUseSingle);
+
+    disconnect(this, SIGNAL (mouseButtonClicked (int, QListViewItem*, const QPoint &, int)),
+               this, SLOT (slotMouseButtonClicked (int, QListViewItem*, const QPoint &, int)));
+
+    if( d->bUseSingle )
+      connect (this, SIGNAL (mouseButtonClicked (int, QListViewItem*, const QPoint &, int)),
+               this, SLOT (slotMouseButtonClicked( int, QListViewItem*, const QPoint &, int)));
+
+    //US d->bChangeCursorOverItem = KGlobalSettings::changeCursorOverIcon();
+    //US d->autoSelectDelay = KGlobalSettings::autoSelectDelay();
+
+    if( !d->bUseSingle || !d->bChangeCursorOverItem )
+       viewport()->unsetCursor();
+
+    break;
+
+    /*US
   case KApplication::SETTINGS_MOUSE:
     d->dragDelay =  KGlobalSettings::dndEventDelay();
     d->bUseSingle = KGlobalSettings::singleClick();
 
     disconnect(this, SIGNAL (mouseButtonClicked (int, QListViewItem*, const QPoint &, int)),
                this, SLOT (slotMouseButtonClicked (int, QListViewItem*, const QPoint &, int)));
 
     if( d->bUseSingle )
       connect (this, SIGNAL (mouseButtonClicked (int, QListViewItem*, const QPoint &, int)),
                this, SLOT (slotMouseButtonClicked( int, QListViewItem*, const QPoint &, int)));
 
     d->bChangeCursorOverItem = KGlobalSettings::changeCursorOverIcon();
     d->autoSelectDelay = KGlobalSettings::autoSelectDelay();
 
     if( !d->bUseSingle || !d->bChangeCursorOverItem )
        viewport()->unsetCursor();
 
     break;
-
   case KApplication::SETTINGS_POPUPMENU:
     d->contextMenuKey = KGlobalSettings::contextMenuKey ();
     d->showContextMenusOnPress = KGlobalSettings::showContextMenusOnPress ();
 
     if (d->showContextMenusOnPress)
     {
       disconnect (0L, 0L, this, SLOT (emitContextMenu (QListViewItem*, const QPoint&, int)));
 
       connect(this, SIGNAL (rightButtonPressed (QListViewItem*, const QPoint&, int)),
               this, SLOT (emitContextMenu (QListViewItem*, const QPoint&, int)));
     }
     else
     {
       disconnect (0L, 0L, this, SLOT (emitContextMenu (QListViewItem*, const QPoint&, int)));
 
       connect(this, SIGNAL (rightButtonClicked (QListViewItem*, const QPoint&, int)),
               this, SLOT (emitContextMenu (QListViewItem*, const QPoint&, int)));
     }
     break;
+    */
 
   default:
     break;
   }
-*/  
     
-    if( d->bUseSingle )
-      connect (this, SIGNAL (mouseButtonClicked (int, QListViewItem*, const QPoint &, int)),
-               this, SLOT (slotMouseButtonClicked( int, QListViewItem*, const QPoint &, int)));
-
 }
 
 void KListView::slotAutoSelect()
 {
   // check that the item still exists
   if( itemIndex( d->pCurrentItem ) == -1 )
     return;
 
   if (!isActiveWindow())
         {
           d->autoSelect.stop();
           return;
         }
 
   //Give this widget the keyboard focus.
   if( !hasFocus() )
     setFocus();
 
   QListViewItem* previousItem = currentItem();
   setCurrentItem( d->pCurrentItem );
 
 #if 0
 #ifndef Q_WS_QWS
   // FIXME(E): Implement for Qt Embedded
   if( d->pCurrentItem ) {
     //Shift pressed?
     if( (keybstate & ShiftMask) ) {
       bool block = signalsBlocked();
       blockSignals( true );
 
       //No Ctrl? Then clear before!
       if( !(keybstate & ControlMask) )
                 clearSelection();
 
       bool select = !d->pCurrentItem->isSelected();
       bool update = viewport()->isUpdatesEnabled();
       viewport()->setUpdatesEnabled( false );
 
       bool down = previousItem->itemPos() < d->pCurrentItem->itemPos();
       QListViewItemIterator lit( down ? previousItem : d->pCurrentItem );
       for ( ; lit.current(); ++lit ) {
                 if ( down && lit.current() == d->pCurrentItem ) {
                   d->pCurrentItem->setSelected( select );
                   break;
                 }
                 if ( !down && lit.current() == previousItem ) {
                   previousItem->setSelected( select );
                   break;
                 }
                 lit.current()->setSelected( select );
       }
 
       blockSignals( block );
       viewport()->setUpdatesEnabled( update );
       triggerUpdate();
 
       emit selectionChanged();
 
       if( selectionMode() == QListView::Single )
                 emit selectionChanged( d->pCurrentItem );
     }
     else if( (keybstate & ControlMask) )
       setSelected( d->pCurrentItem, !d->pCurrentItem->isSelected() );
     else {
       bool block = signalsBlocked();
       blockSignals( true );
 
       if( !d->pCurrentItem->isSelected() )
                 clearSelection();
 
       blockSignals( block );
 
       setSelected( d->pCurrentItem, true );
     }
   }
   else
     kdDebug() << "KListView::slotAutoSelect: Thats not supposed to happen!!!!" << endl;
 #endif
 #endif
 }
 
 void KListView::slotHeaderChanged()
 {
   if (d->fullWidth && columns())
   {
     int w = 0;
     for (int i = 0; i < columns() - 1; ++i) w += columnWidth(i);
     setColumnWidth( columns() - 1, viewport()->width() - w - 1 );
   }
 }
 
-void KListView::emitExecute( QListViewItem *item, const QPoint &pos, int c )
+void KListView::emitExecute( int buttonstate, QListViewItem *item, const QPoint &pos, int c)
 {
+  //  qDebug("KListView::emitExecute buttonstate=%i", buttonstate);
     if( isExecuteArea( viewport()->mapFromGlobal(pos) ) ) {
 
         // Double click mode ?
         if ( !d->bUseSingle )
         {
             emit executed( item );
             emit executed( item, pos, c );
         }
         else
         {
-#if 0
-#ifndef Q_WS_QWS
-	    // FIXME(E): Implement for Qt Embedded
-            Window root;
-            Window child;
-            int root_x, root_y, win_x, win_y;
-            uint keybstate;
-            XQueryPointer( qt_xdisplay(), qt_xrootwin(), &root, &child,
-                           &root_x, &root_y, &win_x, &win_y, &keybstate );
-
+	  //US special implementation for embedded systems
             d->autoSelect.stop();
 
             //Dont emit executed if in SC mode and Shift or Ctrl are pressed
-            if( !( ((keybstate & ShiftMask) || (keybstate & ControlMask)) ) ) {
+	    if( !( (buttonstate==ShiftButton) || (buttonstate==ControlButton) )) {
+	      //            if( !( ((keybstate & ShiftMask) || (keybstate & ControlMask)) ) ) {
+
                 emit executed( item );
                 emit executed( item, pos, c );
             }
-#endif
-#endif
         }
     }
 }
 
 void KListView::focusInEvent( QFocusEvent *fe )
 {
  //   kdDebug()<<"KListView::focusInEvent()"<<endl;
   QListView::focusInEvent( fe );
   if ((d->selectedBySimpleMove)
       && (d->selectionMode == FileManager)
       && (fe->reason()!=QFocusEvent::Popup)
       && (fe->reason()!=QFocusEvent::ActiveWindow)
       && (currentItem()!=0))
   {
       currentItem()->setSelected(true);
       currentItem()->repaint();
       emit selectionChanged();
   };
 }
 
 void KListView::focusOutEvent( QFocusEvent *fe )
 {
   cleanDropVisualizer();
   cleanItemHighlighter();
 
   d->autoSelect.stop();
 
   if ((d->selectedBySimpleMove)
       && (d->selectionMode == FileManager)
       && (fe->reason()!=QFocusEvent::Popup)
       && (fe->reason()!=QFocusEvent::ActiveWindow)
       && (currentItem()!=0)
 /*US      && (!d->editor->isVisible()) */
     )
   {
       currentItem()->setSelected(false);
       currentItem()->repaint();
       emit selectionChanged();
   };
 
   QListView::focusOutEvent( fe );
 }
 
 void KListView::leaveEvent( QEvent *e )
 {
   d->autoSelect.stop();
 
   QListView::leaveEvent( e );
 }
 
 bool KListView::event( QEvent *e )
 {
   if (e->type() == QEvent::ApplicationPaletteChange) {
-qDebug("KListView::event make alternate color configurable");  
+    //qDebug("KListView::event make alternate color configurable");  
 //US  d->alternateBackground=KGlobalSettings::alternateBackgroundColor();
   d->alternateBackground = QColor(240, 240, 240);
   }
 
   return QListView::event(e);
 }
 
 void KListView::contentsMousePressEvent( QMouseEvent *e )
 {
+  //qDebug("KListView::contentsMousePressEvent");
   if( (selectionModeExt() == Extended) && (e->state() & ShiftButton) && !(e->state() & ControlButton) )
   {
     bool block = signalsBlocked();
     blockSignals( true );
 
     clearSelection();
 
     blockSignals( block );
   }
   else if ((selectionModeExt()==FileManager) && (d->selectedBySimpleMove))
   {
      d->selectedBySimpleMove=false;
      d->selectedUsingMouse=true;
      if (currentItem()!=0)
      {
         currentItem()->setSelected(false);
         currentItem()->repaint();
 //        emit selectionChanged();
      };
   };
 
   QPoint p( contentsToViewport( e->pos() ) );
   QListViewItem *at = itemAt (p);
 
   // true if the root decoration of the item "at" was clicked (i.e. the +/- sign)
   bool rootDecoClicked = at
            && ( p.x() <= header()->cellPos( header()->mapToActual( 0 ) ) +
                 treeStepSize() * ( at->depth() + ( rootIsDecorated() ? 1 : 0) ) + itemMargin() )
            && ( p.x() >= header()->cellPos( header()->mapToActual( 0 ) ) );
 
   if (e->button() == LeftButton && !rootDecoClicked)
   {
     //Start a drag
     d->startDragPos = e->pos();
 
     if (at)
     {
       d->validDrag = true;
       d->pressedOnSelected = at->isSelected();
     }
   }
 
   QListView::contentsMousePressEvent( e );
 }
 
 void KListView::contentsMouseMoveEvent( QMouseEvent *e )
 {
     if (!dragEnabled() || d->startDragPos.isNull() || !d->validDrag) {
       QListView::contentsMouseMoveEvent (e);
       return;
     }
 
   QPoint vp = contentsToViewport(e->pos());
   QListViewItem *item = itemAt( vp );
 
   //do we process cursor changes at all?
   if ( item && d->bChangeCursorOverItem && d->bUseSingle )
     {
       //Cursor moved on a new item or in/out the execute area
       if( (item != d->pCurrentItem) ||
           (isExecuteArea(vp) != d->cursorInExecuteArea) )
         {
           d->cursorInExecuteArea = isExecuteArea(vp);
-qDebug("KListView::contentsMouseMoveEvent drag&drop not supported yet");  
+	  //qDebug("KListView::contentsMouseMoveEvent drag&drop not supported yet");  
 /*US
           if( d->cursorInExecuteArea ) //cursor moved in execute area
             viewport()->setCursor( KCursor::handCursor() );
           else //cursor moved out of execute area
             viewport()->unsetCursor();
 */            
         }
     }
 
   bool dragOn = dragEnabled();
   QPoint newPos = e->pos();
   if (dragOn && d->validDrag &&
       (newPos.x() > d->startDragPos.x()+d->dragDelay ||
        newPos.x() < d->startDragPos.x()-d->dragDelay ||
        newPos.y() > d->startDragPos.y()+d->dragDelay ||
        newPos.y() < d->startDragPos.y()-d->dragDelay))
     //(d->startDragPos - e->pos()).manhattanLength() > QApplication::startDragDistance())
     {
       QListView::contentsMouseReleaseEvent( 0 );
       startDrag();
       d->startDragPos = QPoint();
       d->validDrag = false;
     }
 }
 
 void KListView::contentsMouseReleaseEvent( QMouseEvent *e )
 {
   if (e->button() == LeftButton)
   {
     // If the row was already selected, maybe we want to start an in-place editing
     if ( d->pressedOnSelected && itemsRenameable() )
     {
       QPoint p( contentsToViewport( e->pos() ) );
       QListViewItem *at = itemAt (p);
       if ( at )
       {
         // true if the root decoration of the item "at" was clicked (i.e. the +/- sign)
         bool rootDecoClicked =
                   ( p.x() <= header()->cellPos( header()->mapToActual( 0 ) ) +
                     treeStepSize() * ( at->depth() + ( rootIsDecorated() ? 1 : 0) ) + itemMargin() )
                && ( p.x() >= header()->cellPos( header()->mapToActual( 0 ) ) );
 
         if (!rootDecoClicked)
         {
           int col = header()->mapToLogical( header()->cellAt( p.x() ) );
           if ( d->renameable.contains(col) )
             rename(at, col);
         }
       }
     }
 
     d->pressedOnSelected = false;
     d->validDrag = false;
     d->startDragPos = QPoint();
   }
   QListView::contentsMouseReleaseEvent( e );
 }
 
 void KListView::contentsMouseDoubleClickEvent ( QMouseEvent *e )
 {
+  //qDebug("KListView::contentsMouseDoubleClickEvent");
   // We don't want to call the parent method because it does setOpen,
   // whereas we don't do it in single click mode... (David)
   //QListView::contentsMouseDoubleClickEvent( e );
 
   QPoint vp = contentsToViewport(e->pos());
   QListViewItem *item = itemAt( vp );
   emit QListView::doubleClicked( item ); // we do it now
 
   int col = item ? header()->mapToLogical( header()->cellAt( vp.x() ) ) : -1;
 
   if( item ) {
+    //qDebug("KListView::contentsMouseDoubleClickEvent: emit doubleClicked");
+
     emit doubleClicked( item, e->globalPos(), col );
 
-    if( (e->button() == LeftButton) && !d->bUseSingle )
-      emitExecute( item, e->globalPos(), col );
+    if( (e->button() == LeftButton) && !d->bUseSingle ) {
+      //qDebug("KListView::contentsMouseDoubleClickEvent: emitExecute");
+
+      emitExecute( e->button(), item, e->globalPos(), col);
+    }
   }
 }
 
 void KListView::slotMouseButtonClicked( int btn, QListViewItem *item, const QPoint &pos, int c )
 {
-  if( (btn == LeftButton) && item )
-    emitExecute(item, pos, c);
+  //qDebug("KListView::slotMouseButtonClicked");
+
+  if( (btn == LeftButton) && item ) {
+    //qDebug("KListView::slotMouseButtonClicked: emitExecute");
+
+    emitExecute(btn, item, pos, c);
+  }
 }
 
 void KListView::contentsDropEvent(QDropEvent* e)
 {
 qDebug("KListView::contentsDropEvent drag&drop not supported yet");  
 /*US
   cleanDropVisualizer();
   cleanItemHighlighter();
   d->dragExpand.stop();
 
   if (acceptDrag (e))
   {
     e->acceptAction();
     QListViewItem *afterme;
     QListViewItem *parent;
     findDrop(e->pos(), parent, afterme);
 
     if (e->source() == viewport() && itemsMovable())
         movableDropEvent(parent, afterme);
     else
     {
     
         emit dropped(e, afterme);
         emit dropped(this, e, afterme);
         emit dropped(e, parent, afterme);
         emit dropped(this, e, parent, afterme);
         
     }
   }
 */
   
 }
 
 void KListView::movableDropEvent (QListViewItem* parent, QListViewItem* afterme)
 {
   QPtrList<QListViewItem> items, afterFirsts, afterNows;
   QListViewItem *current=currentItem();
   bool hasMoved=false;
   for (QListViewItem *i = firstChild(), *iNext=0; i != 0; i = iNext)
   {
     iNext=i->itemBelow();
     if (!i->isSelected())
       continue;
 
     // don't drop an item after itself, or else
     // it moves to the top of the list
     if (i==afterme)
       continue;
 
     i->setSelected(false);
 
     QListViewItem *afterFirst = i->itemAbove();
 
         if (!hasMoved)
         {
                 emit aboutToMove();
                 hasMoved=true;
         }
 
     moveItem(i, parent, afterme);
 
     // ###### This should include the new parent !!! -> KDE 3.0
     // If you need this right now, have a look at keditbookmarks.
     emit moved(i, afterFirst, afterme);
 
     items.append (i);
     afterFirsts.append (afterFirst);
     afterNows.append (afterme);
 
     afterme = i;
   }
   clearSelection();
   for (QListViewItem *i=items.first(); i != 0; i=items.next() )
     i->setSelected(true);
   if (current)
     setCurrentItem(current);
 
   emit moved(items,afterFirsts,afterNows);
 
   if (firstChild())
     emit moved();
 }
 
 void KListView::contentsDragMoveEvent(QDragMoveEvent *event)
 {
-qDebug("KListView::contentsDropEvent drag&drop not supported yet");  
+  qDebug("KListView::contentsDropEvent drag&drop not supported yet");  
 /*US  
   if (acceptDrag(event))
   {
     event->acceptAction();
     //Clean up the view
 
     findDrop(event->pos(), d->parentItemDrop, d->afterItemDrop);
     QPoint vp = contentsToViewport( event->pos() ); 
     QListViewItem *item = isExecuteArea( vp ) ? itemAt( vp ) : 0L;
     
     if ( item != d->dragOverItem )
     {
       d->dragExpand.stop();
       d->dragOverItem = item;
       d->dragOverPoint = vp;
       if ( d->dragOverItem && d->dragOverItem->isExpandable() && !d->dragOverItem->isOpen() )
         d->dragExpand.start( QApplication::startDragTime(), true );
     }
     if (dropVisualizer())
     {
       QRect tmpRect = drawDropVisualizer(0, d->parentItemDrop, d->afterItemDrop);
       if (tmpRect != d->mOldDropVisualizer)
       {
         cleanDropVisualizer();
         d->mOldDropVisualizer=tmpRect;
         viewport()->repaint(tmpRect);
       }
     }
     if (dropHighlighter())
     {
       QRect tmpRect = drawItemHighlighter(0, d->afterItemDrop);
       if (tmpRect != d->mOldDropHighlighter)
       {
         cleanItemHighlighter();
         d->mOldDropHighlighter=tmpRect;
         viewport()->repaint(tmpRect);
       }
     }
   }
   else
       event->ignore();
 */      
 }
 
 void KListView::slotDragExpand()
 {
   if ( itemAt( d->dragOverPoint ) == d->dragOverItem )
     d->dragOverItem->setOpen( true );
 }
 
 void KListView::contentsDragLeaveEvent (QDragLeaveEvent*)
 {
   d->dragExpand.stop();
   cleanDropVisualizer();
   cleanItemHighlighter();
 }
 
 void KListView::cleanDropVisualizer()
 {
   if (d->mOldDropVisualizer.isValid())
   {
     QRect rect=d->mOldDropVisualizer;
     d->mOldDropVisualizer = QRect();
     viewport()->repaint(rect, true);
   }
 }
 
 int KListView::depthToPixels( int depth )
 {
     return treeStepSize() * ( depth + (rootIsDecorated() ? 1 : 0) ) + itemMargin();
 }
 
 void KListView::findDrop(const QPoint &pos, QListViewItem *&parent, QListViewItem *&after)
 {
   QPoint p (contentsToViewport(pos));
 
   // Get the position to put it in
   QListViewItem *atpos = itemAt(p);
 
   QListViewItem *above;
   if (!atpos) // put it at the end
     above = lastItem();
   else
   {
     // Get the closest item before us ('atpos' or the one above, if any)
       if (p.y() - itemRect(atpos).topLeft().y() < (atpos->height()/2))
           above = atpos->itemAbove();
       else
           above = atpos;
   }
 
   if (above)
   {
       // Now, we know we want to go after "above". But as a child or as a sibling ?
       // We have to ask the "above" item if it accepts children.
       if (above->isExpandable())
       {
           // The mouse is sufficiently on the right ? - doesn't matter if 'above' has visible children
           if (p.x() >= depthToPixels( above->depth() + 1 ) ||
               (above->isOpen() && above->childCount() > 0) )
           {
               parent = above;
               after = 0L;
               return;
           }
       }
 
       // Ok, there's one more level of complexity. We may want to become a new
       // sibling, but of an upper-level group, rather than the "above" item
       QListViewItem * betterAbove = above->parent();
       QListViewItem * last = above;
       while ( betterAbove )
       {
           // We are allowed to become a sibling of "betterAbove" only if we are
           // after its last child
           if ( last->nextSibling() == 0 )
           {
               if (p.x() < depthToPixels ( betterAbove->depth() + 1 ))
                   above = betterAbove; // store this one, but don't stop yet, there may be a better one
               else
                   break; // not enough on the left, so stop
               last = betterAbove;
               betterAbove = betterAbove->parent(); // up one level
           } else
               break; // we're among the child of betterAbove, not after the last one
       }
   }
   // set as sibling
   after = above;
   parent = after ? after->parent() : 0L ;
 }
 
 QListViewItem* KListView::lastChild () const
 {
   QListViewItem* lastchild = firstChild();
 
   if (lastchild)
         for (; lastchild->nextSibling(); lastchild = lastchild->nextSibling());
 
   return lastchild;
 }
 
 QListViewItem *KListView::lastItem() const
 {
   QListViewItem* last = lastChild();
 
   for (QListViewItemIterator it (last); it.current(); ++it)
     last = it.current();
 
   return last;
 }
 
 KLineEdit *KListView::renameLineEdit() const
 {
 //US  return d->editor;
 qDebug("KListView::renameLineEdit returns 0. Might crash");  
 return 0;
 }
 
 void KListView::startDrag()
 {
 qDebug("KListView::startDrag drag&drop not supported yet.");  
 /*US
   QDragObject *drag = dragObject();
 
   if (!drag)
         return;
 
   if (drag->drag() && drag->target() != viewport())
     emit moved();
 */    
 }
 
 QDragObject *KListView::dragObject()
 {
   if (!currentItem())
         return 0;
 
   return new QStoredDrag("application/x-qlistviewitem", viewport());
 }
 
 void KListView::setItemsMovable(bool b)
 {
   d->itemsMovable=b;
 }
 
 bool KListView::itemsMovable() const
 {
   return d->itemsMovable;
 }
 
 void KListView::setItemsRenameable(bool b)
 {
   d->itemsRenameable=b;
 }
 
 bool KListView::itemsRenameable() const
 {
   return d->itemsRenameable;
 }
 
 
 void KListView::setDragEnabled(bool b)
 {
   d->dragEnabled=b;
 }
 
 bool KListView::dragEnabled() const
 {
   return d->dragEnabled;
 }
 
 void KListView::setAutoOpen(bool b)
 {
   d->autoOpen=b;
 }
 
 bool KListView::autoOpen() const
 {
   return d->autoOpen;
 }
 
 bool KListView::dropVisualizer() const
 {
   return d->dropVisualizer;
 }
 
 void KListView::setDropVisualizer(bool b)
 {
   d->dropVisualizer=b;
 }
 
 QPtrList<QListViewItem> KListView::selectedItems() const
 {
   QPtrList<QListViewItem> list;
   for (QListViewItem *i=firstChild(); i!=0; i=i->itemBelow())
         if (i->isSelected()) list.append(i);
   return list;
 }
 
 
 void KListView::moveItem(QListViewItem *item, QListViewItem *parent, QListViewItem *after)
 {
   // sanity check - don't move a item into it's own child structure
   QListViewItem *i = parent;
   while(i)
     {
       if(i == item)
         return;
       i = i->parent();
     }
 
   // Basically reimplementing the QListViewItem(QListViewItem*, QListViewItem*) constructor
   // in here, without ever deleting the item.
   if (item->parent())
         item->parent()->takeItem(item);
@@ -1635,557 +1656,566 @@ void KListView::fileManagerKeyPressEvent (QKeyEvent* e)
           repaintItem2=nextItem;
           visItem=nextItem;
           setCurrentItem(nextItem);
        };
        break;
 
     case Key_End:
        //move to the last item and toggle selection of all items inbetween
        nextItem=item;
        if (d->selectedBySimpleMove)
           item->setSelected(false);
        if (shiftOrCtrl)
           d->selectedBySimpleMove=false;
 
        while(nextItem!=0)
        {
           if (shiftOrCtrl)
              nextItem->setSelected(!nextItem->isSelected());
           if (nextItem->itemBelow()==0)
           {
              if (d->selectedBySimpleMove)
                 nextItem->setSelected(true);
              repaintItem2=nextItem;
              visItem=nextItem;
              setCurrentItem(nextItem);
           }
           nextItem=nextItem->itemBelow();
        }
        emitSelectionChanged=TRUE;
        break;
 
     case Key_Home:
        // move to the first item and toggle selection of all items inbetween
        nextItem = firstChild();
        visItem = nextItem;
        repaintItem2 = visItem;
        if (d->selectedBySimpleMove)
           item->setSelected(false);
        if (shiftOrCtrl)
        {
           d->selectedBySimpleMove=false;
        
           while ( nextItem != item )
           {
              nextItem->setSelected( !nextItem->isSelected() );
              nextItem = nextItem->itemBelow();
           }
           item->setSelected( !item->isSelected() );
        }
        setCurrentItem( firstChild() );
        emitSelectionChanged=TRUE;
        break;
 
     case Key_Next:
        items=visibleHeight()/item->height();
        nextItem=item;
        if (d->selectedBySimpleMove)
           item->setSelected(false);
        if (shiftOrCtrl)
        {
           d->selectedBySimpleMove=false;
           d->selectionDirection=1;
        };
 
        for (int i=0; i<items; i++)
        {
           if (shiftOrCtrl)
              nextItem->setSelected(!nextItem->isSelected());
           //the end
           if ((i==items-1) || (nextItem->itemBelow()==0))
 
           {
              if (shiftOrCtrl)
                 nextItem->setSelected(!nextItem->isSelected());
              if (d->selectedBySimpleMove)
                 nextItem->setSelected(true);
              ensureItemVisible(nextItem);
              setCurrentItem(nextItem);
              update();
              if ((shiftOrCtrl) || (d->selectedBySimpleMove))
              {
                 emit selectionChanged();
              }
              return;
           }
           nextItem=nextItem->itemBelow();
        }
        break;
 
     case Key_Prior:
        items=visibleHeight()/item->height();
        nextItem=item;
        if (d->selectedBySimpleMove)
           item->setSelected(false);
        if (shiftOrCtrl)
        {
           d->selectionDirection=-1;
           d->selectedBySimpleMove=false;
        };
 
        for (int i=0; i<items; i++)
        {
           if ((nextItem!=item) &&(shiftOrCtrl))
              nextItem->setSelected(!nextItem->isSelected());
           //the end
           if ((i==items-1) || (nextItem->itemAbove()==0))
 
           {
              if (d->selectedBySimpleMove)
                 nextItem->setSelected(true);
              ensureItemVisible(nextItem);
              setCurrentItem(nextItem);
              update();
              if ((shiftOrCtrl) || (d->selectedBySimpleMove))
              {
                 emit selectionChanged();
              }
              return;
           }
           nextItem=nextItem->itemAbove();
        }
        break;
 
     case Key_Minus:
        if ( item->isOpen() )
           setOpen( item, FALSE );
        break;
     case Key_Plus:
        if (  !item->isOpen() && (item->isExpandable() || item->childCount()) )
           setOpen( item, TRUE );
        break;
     default:
        bool realKey = ((e->key()!=Key_Shift) && (e->key()!=Key_Control)
                         && (e->key()!=Key_Meta) && (e->key()!=Key_Alt));
 
        bool selectCurrentItem = (d->selectedBySimpleMove) && (item->isSelected());
        if (realKey && selectCurrentItem)
           item->setSelected(false);
        //this is mainly for the "goto filename beginning with pressed char" feature (aleXXX)
        QListView::SelectionMode oldSelectionMode = selectionMode();
        setSelectionMode (QListView::Multi);
        QListView::keyPressEvent (e);
        setSelectionMode (oldSelectionMode);
        if (realKey && selectCurrentItem)
        {
           currentItem()->setSelected(true);
           emitSelectionChanged=TRUE;
        }
        repaintItem2=currentItem();
        if (realKey)
           visItem=currentItem();
        break;
     }
 
     if (visItem)
        ensureItemVisible(visItem);
 
     QRect ir;
     if (repaintItem1)
        ir = ir.unite( itemRect(repaintItem1) );
     if (repaintItem2)
        ir = ir.unite( itemRect(repaintItem2) );
 
     if ( !ir.isEmpty() )
     {                 // rectangle to be repainted
        if ( ir.x() < 0 )
           ir.moveBy( -ir.x(), 0 );
        viewport()->repaint( ir, FALSE );
     }
     /*if (repaintItem1)
        repaintItem1->repaint();
     if (repaintItem2)
        repaintItem2->repaint();*/
     update();
     if (emitSelectionChanged)
        emit selectionChanged();
 }
 
 void KListView::setSelectionModeExt (SelectionModeExt mode)
 {
     d->selectionMode = mode;
 
     switch (mode)
     {
     case Single:
     case Multi:
     case Extended:
     case NoSelection:
         setSelectionMode (static_cast<QListView::SelectionMode>(static_cast<int>(mode)));
         break;
 
     case FileManager:
         setSelectionMode (QListView::Extended);
         break;
 
     default:
         kdWarning () << "Warning: illegal selection mode " << int(mode) << " set!" << endl;
         break;
     }
 }
 
 KListView::SelectionModeExt KListView::selectionModeExt () const
 {
   return d->selectionMode;
 }
 
 int KListView::itemIndex( const QListViewItem *item ) const
 {
     if ( !item )
         return -1;
 
     if ( item == firstChild() )
         return 0;
     else {
         QListViewItemIterator it(firstChild());
         uint j = 0;
         for (; it.current() && it.current() != item; ++it, ++j );
 
         if( !it.current() )
           return -1;
 
         return j;
     }
 }
 
 QListViewItem* KListView::itemAtIndex(int index)
 {
    if (index<0)
       return 0;
 
    int j(0);
    for (QListViewItemIterator it=firstChild(); it.current(); it++)
    {
       if (j==index)
          return it.current();
       j++;
    };
    return 0;
 }
 
 
 void KListView::emitContextMenu (KListView*, QListViewItem* i)
 {
   QPoint p;
   //    qDebug("KListView::emitContextMenu ");
 
   if (i)
         p = viewport()->mapToGlobal(itemRect(i).center());
   else
         p = mapToGlobal(rect().center());
 
   emit contextMenu (this, i, p);
 }
 
 void KListView::emitContextMenu (QListViewItem* i, const QPoint& p, int col)
 {
-    qDebug("KListView::emitContextMenu col");
+  //    qDebug("KListView::emitContextMenu col");
     emit contextRequest( i, p,  col );
     emit contextMenu (this, i, p);
 }
 
 void KListView::setAcceptDrops (bool val)
 {
   QListView::setAcceptDrops (val);
   viewport()->setAcceptDrops (val);
 }
 
 int KListView::dropVisualizerWidth () const
 {
         return d->mDropVisualizerWidth;
 }
 
 
 void KListView::viewportPaintEvent(QPaintEvent *e)
 {
   QListView::viewportPaintEvent(e);
 
   if (d->mOldDropVisualizer.isValid() && e->rect().intersects(d->mOldDropVisualizer))
     {
       QPainter painter(viewport());
 
       // This is where we actually draw the drop-visualizer
       painter.fillRect(d->mOldDropVisualizer, Dense4Pattern);
     }
   if (d->mOldDropHighlighter.isValid() && e->rect().intersects(d->mOldDropHighlighter))
     {
       QPainter painter(viewport());
 
 qDebug("KListView::viewportPaintEvent has to be verified");  
       
       // This is where we actually draw the drop-highlighter
 //US      style().drawPrimitive(QStyle::PE_FocusRect, &painter, d->mOldDropHighlighter, colorGroup(),
 //US                            QStyle::Style_FocusAtBorder);
                             
 //LR style().drawFocusRect(&painter, d->mOldDropHighlighter, colorGroup(), (const QColor*)0, true);
                                 
                             
     }
 }
 
 void KListView::setFullWidth()
 {
   setFullWidth(true);
 }
 
 void KListView::setFullWidth(bool fullWidth)
 {
   d->fullWidth = fullWidth;
 //US  header()->setStretchEnabled(fullWidth, columns()-1);
 }
 
 bool KListView::fullWidth() const
 {
   return d->fullWidth;
 }
 
 int KListView::addColumn(const QString& label, int width)
 {
   int result = QListView::addColumn(label, width);
   if (d->fullWidth) {
 //US    header()->setStretchEnabled(false, columns()-2);
 //US    header()->setStretchEnabled(true, columns()-1);
   }
   return result;
 }
 
 int KListView::addColumn(const QIconSet& iconset, const QString& label, int width)
 {
   int result = QListView::addColumn(iconset, label, width);
   if (d->fullWidth) {
 //US    header()->setStretchEnabled(false, columns()-2);
 //US    header()->setStretchEnabled(true, columns()-1);
   }
   return result;
 }
 
 void KListView::removeColumn(int index)
 {
   QListView::removeColumn(index);
 //US  if (d->fullWidth && index == columns()) header()->setStretchEnabled(true, columns()-1);
 }
 
 void KListView::viewportResizeEvent(QResizeEvent* e)
 {
   QListView::viewportResizeEvent(e);
 }
 
 const QColor &KListView::alternateBackground() const
 {
   return d->alternateBackground;
 }
 
 void KListView::setAlternateBackground(const QColor &c)
 {
   d->alternateBackground = c;
   repaint();
 }
 
 void KListView::saveLayout(KConfig *config, const QString &group) const
 {
   KConfigGroupSaver saver(config, group);
   QStringList widths, order;
   for (int i = 0; i < columns(); ++i)
   {
     widths << QString::number(columnWidth(i));
     order << QString::number(header()->mapToIndex(i));
   }
   config->writeEntry("ColumnWidths", widths);
   config->writeEntry("ColumnOrder", order);
   config->writeEntry("SortColumn", d->sortColumn);
   config->writeEntry("SortAscending", d->sortAscending);
 }
 
 void KListView::restoreLayout(KConfig *config, const QString &group)
 {
   KConfigGroupSaver saver(config, group);
   QStringList cols = config->readListEntry("ColumnWidths");
   int i = 0;
   for (QStringList::ConstIterator it = cols.begin(); it != cols.end(); ++it)
     setColumnWidth(i++, (*it).toInt());
 
   cols = config->readListEntry("ColumnOrder");
   i = 0;
   for (QStringList::ConstIterator it = cols.begin(); it != cols.end(); ++it)
     header()->moveSection(i++, (*it).toInt());
 
 /*US I changed the following code, because hasKey is not available.
 !!! check if my version is correct
   if (config->hasKey("SortColumn"))
     setSorting(config->readNumEntry("SortColumn"), config->readBoolEntry("SortAscending", true));
 */
   QStringList langLst = config->readListEntry( "SortColumn" );
   if (!langLst.isEmpty())
     setSorting(config->readNumEntry("SortColumn"), config->readBoolEntry("SortAscending", true));
 }
 
 void KListView::setSorting(int column, bool ascending)
 {
   d->sortColumn = column;
   d->sortAscending = ascending;
   QListView::setSorting(column, ascending);
 }
 
 int KListView::columnSorted(void) const
 {
   return d->sortColumn;
 }
 
 bool KListView::ascendingSort(void) const
 {
   return d->sortAscending;
 }
 
 KListViewItem::KListViewItem(QListView *parent)
   : QListViewItem(parent)
 {
   init();
 }
 
 KListViewItem::KListViewItem(QListViewItem *parent)
   : QListViewItem(parent)
 {
   init();
 }
 
 KListViewItem::KListViewItem(QListView *parent, QListViewItem *after)
   : QListViewItem(parent, after)
 {
   init();
 }
 
 KListViewItem::KListViewItem(QListViewItem *parent, QListViewItem *after)
   : QListViewItem(parent, after)
 {
   init();
 }
 
 KListViewItem::KListViewItem(QListView *parent,
     QString label1, QString label2, QString label3, QString label4,
     QString label5, QString label6, QString label7, QString label8)
   : QListViewItem(parent, label1, label2, label3, label4, label5, label6, label7, label8)
 {
   init();
 }
 
 KListViewItem::KListViewItem(QListViewItem *parent,
     QString label1, QString label2, QString label3, QString label4,
     QString label5, QString label6, QString label7, QString label8)
   : QListViewItem(parent, label1, label2, label3, label4, label5, label6, label7, label8)
 {
   init();
 }
 
 KListViewItem::KListViewItem(QListView *parent, QListViewItem *after,
     QString label1, QString label2, QString label3, QString label4,
     QString label5, QString label6, QString label7, QString label8)
   : QListViewItem(parent, after, label1, label2, label3, label4, label5, label6, label7, label8)
 {
   init();
 }
 
 KListViewItem::KListViewItem(QListViewItem *parent, QListViewItem *after,
     QString label1, QString label2, QString label3, QString label4,
     QString label5, QString label6, QString label7, QString label8)
   : QListViewItem(parent, after, label1, label2, label3, label4, label5, label6, label7, label8)
 {
   init();
 }
 
 KListViewItem::~KListViewItem()
 {
 }
 
 void KListViewItem::init()
 {
   m_known = false;
 }
 
 const QColor &KListViewItem::backgroundColor()
 {
   if (isAlternate())
     return static_cast< KListView* >(listView())->alternateBackground();
   return listView()->viewport()->colorGroup().base();
 }
 
 bool KListViewItem::isAlternate()
 {
   KListView *lv = static_cast<KListView *>(listView());
   if (lv && lv->alternateBackground().isValid())
   {
     KListViewItem *above = 0;
 //US    above = dynamic_cast<KListViewItem *>(itemAbove());
     above = (KListViewItem *)(itemAbove());
     m_known = above ? above->m_known : true;
     if (m_known)
     {
        m_odd = above ? !above->m_odd : false;
     }
     else
     {
        KListViewItem *item;
        bool previous = true;
        if (parent())
        {
 //US          item = dynamic_cast<KListViewItem *>(parent());
           item = (KListViewItem *)(parent());
           if (item)
              previous = item->m_odd;
 //US          item = dynamic_cast<KListViewItem *>(parent()->firstChild());
           item = (KListViewItem *)(parent()->firstChild());
        }
        else
        {
 //US          item = dynamic_cast<KListViewItem *>(lv->firstChild());
           item = (KListViewItem *)(lv->firstChild());
        }
 
        while(item)
        {
           item->m_odd = previous = !previous;
           item->m_known = true;
 //US          item = dynamic_cast<KListViewItem *>(item->nextSibling());
           item = (KListViewItem *)(item->nextSibling());
        }
     }
     return m_odd;
   }
   return false;
 }
 
 void KListViewItem::paintCell(QPainter *p, const QColorGroup &cg, int column, int width, int alignment)
 {
   QColorGroup _cg = cg;
   const QPixmap *pm = listView()->viewport()->backgroundPixmap();
   if (pm && !pm->isNull())
   {
         _cg.setBrush(QColorGroup::Base, QBrush(backgroundColor(), *pm));
         QPoint o = p->brushOrigin();
         p->setBrushOrigin( o.x()-listView()->contentsX(), o.y()-listView()->contentsY() );
   }
   else if (isAlternate()) {
 //US       if (listView()->viewport()->backgroundMode()==Qt::FixedColor)
        if (listView()->viewport()->backgroundMode()==QWidget::PaletteBackground)
             _cg.setColor(QColorGroup::Background, static_cast< KListView* >(listView())->alternateBackground());
        else
         _cg.setColor(QColorGroup::Base, static_cast< KListView* >(listView())->alternateBackground());
   }
   QListViewItem::paintCell(p, _cg, column, width, alignment);
 }
 
+//US we do not have a "global KDE" variable to setup singleClick functionality
+void KListView::setSingleClick(bool s)
+{
+  d->bUseSingle = s;
+  slotSettingsChanged(1);
+  //  qDebug("KListView::setSingleClick: single %i", d->bUseSingle);
+}
+
+
 void KListView::virtual_hook( int, void* )
 { /*BASE::virtual_hook( id, data );*/ }
 
 //US #include "klistview.moc"
 //US #include "klistviewlineedit.moc"
 
 // vim: ts=2 sw=2 et
diff --git a/microkde/kdeui/klistview.h b/microkde/kdeui/klistview.h
index 8d933f6..d559ce7 100644
--- a/microkde/kdeui/klistview.h
+++ b/microkde/kdeui/klistview.h
@@ -119,824 +119,829 @@ public:
         };
   /**
    * Constructor.
    *
    * The parameters @p parent and @p name are handled by
    * @ref QListView, as usual.
    */
   KListView (QWidget *parent = 0, const char *name = 0);
 
   /**
    * Destructor.
    */
   virtual ~KListView();
 
  /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void setAcceptDrops (bool);
 
   /**
    * This function determines whether the given coordinates are within the
    * execute area. The execute area is the part of a @ref QListViewItem where mouse
    * clicks or double clicks respectively generate a @ref #executed() signal.
    * Depending on @ref QListView::allColumnsShowFocus() this is either the
    * whole item or only the first column.
    * @return true if point is inside execute area of an item, false in all
    * other cases including the case that it is over the viewport.
    */
   virtual bool isExecuteArea( const QPoint& point );
 
   /**
    * Same thing, but from an x coordinate only. This only checks if x is in
    * the first column (if all columns don't show focus), without testing if
    * the y coordinate is over an item or not.
    */
   bool isExecuteArea( int x );
 
   /**
    * @return a list containing the currently selected items.
    */
   QPtrList<QListViewItem> selectedItems() const; // ### BIC: KDE 4: use an implicitly shared class! (QValueList?)
 
   /**
    * Arbitrarily move @p item to @p parent, positioned immediately after item @p after.
    */
   void moveItem(QListViewItem *item, QListViewItem *parent, QListViewItem *after);
 
   /**
    * @return the last item (not child!) of this listview.
    *
    * @see lastChild()
    */
   QListViewItem *lastItem() const;
 
   /**
    * @return the last child of this listview.
    *
    * @see lastItem()
    */
   QListViewItem* lastChild () const;
 
   /**
    * @return the lineedit used for inline renaming.
    * Use that to setup a @ref KCompletion or @ref QValidator for the lineedit
    *
    * @since 3.2
    */
   KLineEdit* renameLineEdit() const;
 
   /**
    * @returns if it is legal to move items in the list view.  True by default.
    * 
    * @see #setDragEnabled()
    * @see #setItemsMovable()
    */
   bool itemsMovable() const;
 
   /**
    * @return whether inplace-renaming has been enabled.  False by default.
    *
    * @see #setItemsRenameable()
    */
   bool itemsRenameable() const;
 
   /**
    * @return whether dragging is enabled.  False by default.
    *
    * @see #setDragEnabled()
    */
   bool dragEnabled() const;
 
   /**
    * @return true if AutoOpen is enabled (not implemented currently).
    *
    * @see #setAutoOpen()
    */
   bool autoOpen() const;
 
   /**
    * @return true if @p column is renamable.
    *
    * @see #setRenameable()
    */
   bool isRenameable (int column) const;
 
   /**
    * @return true if drawing of the drop-visualizer has been enabled.  True by default.
    *
    * @see #setDropVisualizer()
    */
   bool dropVisualizer() const;
 
   /**
    * @return the column for which tooltips are displayed (or -1 if none set).
    *
    * @see #setTooltipColumn()
    */
   int tooltipColumn() const;
 
   /**
    * For future expansions.
    *
    * Do not use.
    * @deprecated
    */
   bool createChildren() const;
 
   /**
    * @return true if drawing of the drop-highlighter has been enabled.  False by default.
    *
    * @see #setDropHighlighter()
    */
   bool dropHighlighter() const;
 
   /**
    * The dropVisualizerWidth defaults to 4.
    *
    * @see #setDropVisualizerWidth()
    * @return the current width of the drop-visualizer.
    */
   int dropVisualizerWidth () const;
 
   /**
    * @return the "extended" selection mode of this listview.
    *
    * @see SelectionModeExt
    * @see setSelectionModeExt
    */
   SelectionModeExt selectionModeExt () const;
 
   /**
    * Returns the index of @p item within the item tree or -1 if
    * @p item doesn't exist in this list view. This function takes
    * all items into account not only the visible ones.
    */
   int itemIndex( const QListViewItem *item ) const;
 
   /**
    * Returns the item of @p index within the item tree or 0 if
    * @p index doesn't exist in this list view. This function takes
    * all items into account not only the visible ones.
    */
   QListViewItem* itemAtIndex(int index);
 
   /**
    * @deprecated
    * @see #setFullWidth()
    */
   void setFullWidth();
   
   /**
    * Let the last column fit exactly all the available width.
    *
    * @see #fullWidth()
    */
   void setFullWidth(bool fullWidth);
   
   /**
    * Returns whether the last column is set to fit the available width.
    *
    * @see #setFullWidth()
    */
   bool fullWidth() const;
   
   /**
    * Reimplemented for full width support
    *
    * @see #removeColumn()
    */
   virtual int addColumn(const QString& label, int width = -1);
   /**
    * Reimplemented for full width support
    */
   virtual int addColumn(const QIconSet& iconset, const QString& label, int width = -1);
   /**
    * Reimplemented for full width support
    *
    * @see #addColumn()
    */
   virtual void removeColumn(int index);
 
   /**
    * sets the alternate background background color.
    * This only has an effect if the items are KListViewItems
    *
    * @param c the color to use for every other item. Set to an invalid
    *        colour to disable alternate colours.
    *
    * @see #alternateBackground()
    **/
   void setAlternateBackground(const QColor &c);
   /**
    * @return the alternate background color
    *
    * @see #setAlternateBackground()
    */
   const QColor &alternateBackground() const;
 
   /**
    * Saves the list view's layout (column widtsh, column order, sort column)
    * to a KConfig group
    *
    * @param config the @ref KConfig object to write to
    * @param group the config group to use
    */
   void saveLayout(KConfig *config, const QString &group) const;
   /**
    * Reads the list view's layout from a KConfig group as stored with
    * @ref #saveLayout
    *
    * @param config the @ref KConfig object to read from
    * @param group the config group to use
    */
   void restoreLayout(KConfig *config, const QString &group);
   /**
    * Reimplemented to remember the current sort column and order.
    * @param column is the column to be sorted, or -1 to sort in order of
    * insertion
    * @param whether to sort ascending (or descending)
    */
   virtual void setSorting(int column, bool ascending = true);
 
   /**
    * @return the currently sorted column, or -1 if none is sorted
    */
   int columnSorted(void) const;
 
   /**
    * @return whether the current sort is ascending (or descending)
    */
   bool ascendingSort(void) const;
 
+  //US we do not have a "global KDE" variable to setup singleClick functionality
+  void setSingleClick(bool s);
+
+
 signals:
 
   /**
    * This signal is emitted whenever the user executes an listview item.
    * That means depending on the KDE wide Single Click/Double Click
    * setting the user clicked or double clicked on that item.
    * @param item is the pointer to the executed listview item.
    *
    * Note that you may not delete any @ref QListViewItem objects in slots
    * connected to this signal.
    */
   void executed( QListViewItem *item );
 
   /**
    * This signal is emitted whenever the user executes an listview item.
    * That means depending on the KDE wide Single Click/Double Click
    * setting the user clicked or double clicked on that item.
    * @param item is the pointer to the executed listview item.
    * @param pos is the position where the user has clicked
    * @param c is the column into which the user clicked.
    *
    * Note that you may not delete any @ref QListViewItem objects in slots
    * connected to this signal.
    */
   void executed( QListViewItem *item, const QPoint &pos, int c );
 
   /**
    * This signal gets emitted whenever the user double clicks into the
    * listview.
    * @param item is the pointer to the clicked listview item.
    * @param pos is the position where the user has clicked, and
    * @param c is the column into which the user clicked.
    *
    * Note that you may not delete any @ref QListViewItem objects in slots
    * connected to this signal.
    *
    * This signal is more or less here for the sake of completeness.
    * You should normally not need to use this. In most cases its better
    * to use @ref #executed() instead.
    */
   void doubleClicked( QListViewItem *item, const QPoint &pos, int c );
   void contextRequest( QListViewItem *item, const QPoint &pos, int c );
 
   /**
    * This signal gets emitted whenever something acceptable is
    * dropped onto the listview.
    *
    * @param e is the drop event itself (it has already been accepted)
    * @param after is the item after which the drop occured (or 0L, if
    * the drop was above all items)
    *
    * @see #acceptDrop()
    */
   void dropped (QDropEvent * e, QListViewItem *after);
 
   /**
    * This signal gets emitted whenever something acceptable is
    * dropped onto the listview.
    *
    * This is an overloaded version of the above (provided to simplify
    * processing drops outside of the class).
    *
    * @param list is the listview
    * @param e is the drop event itself (it has already been accepted)
    * @param after is the item after which the drop occured (or 0L, if
    * the drop was above all items
    */
   void dropped (KListView* list, QDropEvent* e, QListViewItem* after);
 
   /**
    * This signal gets emitted whenever something acceptable is
    * dropped onto the listview.
    *
    * This function also provides a parent, in the event that your listview
    * is a tree
    * @param list is the listview
    * @param e is the drop event itself (it has already been accepted)
    * @param parent the item that is to be the parent of the new item
    * @param after is the item after which the drop occured (or 0L, if
    * the drop was above all items
    */
   void dropped (KListView* list, QDropEvent* e, QListViewItem* parent, QListViewItem* after);
 
   /**
    * This signal gets emitted whenever something acceptable is
    * dropped onto the listview.
    *
    * This function also provides a parent, in the event that your listview
    * is a tree
    * @param e is the drop event itself (it has already been accepted)
    * @param parent the item that is to be the parent of the new item
    * @param after is the item after which the drop occured (or 0L, if
    * the drop was above all items
    */
   void dropped (QDropEvent* e, QListViewItem* parent, QListViewItem* after);
 
   /**
    * This signal is emitted when ever the user moves an item in the list via
    * DnD.
    * If more than one item is moved at the same time, this signal is only emitted
    * once.
    */
   void moved();
 
   /**
    * Connect to this signal if you want to do some preprocessing before
    * a move is made, for example, to disable sorting
    *
    * This is sent only once per each groups of moves.  That is, for each
    * drop that is a move this will be emitted once, before KListView calls
    * @see moveItem()
    */
   void aboutToMove();
 
   /**
    * This signal is emitted when ever the user moves an item in the list via
    * DnD.
    * If more than one item is moved at the same time, @p afterFirst and
    * @p afterNow will reflect what was true before the move.
    * This differs from @ref moved(), so be careful. All the items will have been
    * moved before @ref moved() is emitted, which is not true in this method. // FIXME
    * @param item the item that was moved
    * @param afterFirst the item that parameter item was in before the move, in the list
    * @param afterNow the item it's currently after.
    */
   void moved (QListViewItem *item, QListViewItem *afterFirst, QListViewItem *afterNow);
 
 
   /**
    * This signal is emitted after all the items have been moved. It reports info for
    * each and every item moved, in order.  The first element in @p items associates
    * with the first of afterFirst and afterNow.
    */
   void moved(QPtrList<QListViewItem> &items, QPtrList<QListViewItem> &afterFirst, QPtrList<QListViewItem> &afterNow);
 
   /**
    * This signal gets emitted when an item is renamed via in-place renaming.
    *
    * @param item is the renamed item.
    * @param str is the new value of column @p col.
    * @param col is the renamed column.
    */
   void itemRenamed(QListViewItem* item, const QString &str, int col);
 
   /**
    * Same as above, but without the extra information.
    */
   void itemRenamed(QListViewItem* item);
   void signalDelete();
 
   /**
    * This signal is emitted when the shortcut key for popup-menus is pressed.
    *
    * Normally you should not use this, just connect a slot to signal
    * @ref contextMenu (KListView*, QListViewItem*, const QPoint&) to correctly
    * handle showing context menus regardless of settings.
    *
    * @param list is this listview.
    * @param item is the @ref currentItem() at the time the key was pressed. May be 0L.
    */
   void menuShortCutPressed (KListView* list, QListViewItem* item);
 
   /**
    * This signal is emitted whenever a context-menu should be shown for item @p i.
    * It automatically adjusts for all settings involved (Menu key, showMenuOnPress/Click).
    *
    * @param l is this listview.
    * @param i is the item for which the menu should be shown. May be 0L.
    * @param p is the point at which the menu should be shown.
    */
   void contextMenu (KListView* l, QListViewItem* i, const QPoint& p);
 
 public slots:
   /**
    * Rename column @p c of @p item.
    */
   virtual void rename(QListViewItem *item, int c);
 
   /**
    * By default, if you called setItemsRenameable(true),
    * only the first column is renameable.
    * Use this function to enable the feature on other columns.
    *
    * If you want more intelligent (dynamic) selection,
    * you'll have to derive from KListView,
    * and override @ref rename() and call only call it
    * if you want the item to be renamed.
    */
   void setRenameable (int column, bool yesno=true);
 
   /**
    * Set whether items in the list view can be moved.
    * It is enabled by default.
    *
    * @see itemsMovable()
    */
   virtual void setItemsMovable(bool b);
 
   /**
    * Enables inplace-renaming of items.
    * It is disabled by default.
    *
    * @see itemsRenameable()
    * @see setRenameable()
    */
   virtual void setItemsRenameable(bool b);
 
   /**
    * Enable/Disable the dragging of items.
    * It is disabled by default.
    */
   virtual void setDragEnabled(bool b);
 
   /**
    * Enable/Disable AutoOpen (not implemented currently).
    */
   virtual void setAutoOpen(bool b);
 
   /**
    * Enable/Disable the drawing of a drop-visualizer
    * (a bar that shows where a dropped item would be inserted).
    * It is enabled by default, if dragging is enabled
    */
   virtual void setDropVisualizer(bool b);
 
   /**
    * Set the width of the (default) drop-visualizer.
    * If you don't call this method, the width is set to 4.
    */
   void setDropVisualizerWidth (int w);
 
   /**
    * Set which column should be used for automatic tooltips.
    *
    * @param column is the column for which tooltips will be shown.
    * Set -1 to disable this feature.
    */
   virtual void setTooltipColumn(int column);
 
   /**
    * Enable/Disable the drawing of a drop-highlighter
    * (a rectangle around the item under the mouse cursor).
    * It is disabled by default.
    */
   virtual void setDropHighlighter(bool b);
 
   /**
    * For future expansions.
    *
    * Do not use.
    * @deprecated
    */
   virtual void setCreateChildren(bool b);
 
   /**
    * Set the selection mode.
    *
    * A different name was chosen to avoid API-clashes with @ref QListView::setSelectionMode().
    */
   void setSelectionModeExt (SelectionModeExt mode);
 
   /**
    * Enable/disable tabbing between editable cells
    * @since 3.1
    */
   void setTabOrderedRenaming(bool b);
 
   /**
    * Returns whether tab ordered renaming is enabled
    * @since 3.1
    */
   bool tabOrderedRenaming() const;
 
 protected:
   /**
    * Determine whether a drop on position @p p would count as
    * being above or below the QRect @p rect.
    *
    * @param rect is the rectangle we examine.
    * @param p is the point located in the rectangle, p is assumed to be in
    * viewport coordinates.
    */
   inline bool below (const QRect& rect, const QPoint& p)
   {
 	return (p.y() > (rect.top() + (rect.bottom() - rect.top())/2));
   }
 
   /**
    * An overloaded version of below(const QRect&, const QPoint&).
    *
    * It differs from the above only in what arguments it takes.
    *
    * @param i the item whose rect() is passed to the above function.
    * @param p is translated from contents coordinates to viewport coordinates
    * before being passed to the above function.
    */
   inline bool below (QListViewItem* i, const QPoint& p)
   {
 	return below (itemRect(i), contentsToViewport(p));
   }
 
   /**
    * Reimplemented to reload the alternate background in palette changes.
    * @internal
    */
   virtual bool event( QEvent * );
 
   /**
    * Emit signal @ref #executed.
    * @internal
    */
-  void emitExecute( QListViewItem *item, const QPoint &pos, int c );
+  //US I added buttonstate to pass the current keyboard status 
+  void emitExecute( int buttonstate, QListViewItem *item, const QPoint &pos, int c);
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
    virtual void focusInEvent(QFocusEvent* fe);
 
    /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void focusOutEvent( QFocusEvent *fe );
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void leaveEvent( QEvent *e );
 
   /**
    * @return the tooltip for @p column of @p item.
    */
   virtual QString tooltip(QListViewItem* item, int column) const;
 
   /**
    * @return whether the tooltip for @p column of @p item shall be shown at point @p pos.
    */
   virtual bool showTooltip(QListViewItem *item, const QPoint &pos, int column) const;
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
    virtual void contentsDragMoveEvent (QDragMoveEvent *event);
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void contentsMousePressEvent( QMouseEvent *e );
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void contentsMouseMoveEvent( QMouseEvent *e );
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void contentsMouseDoubleClickEvent ( QMouseEvent *e );
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void contentsDragLeaveEvent (QDragLeaveEvent *event);
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void contentsMouseReleaseEvent (QMouseEvent*);
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void contentsDropEvent (QDropEvent*);
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void contentsDragEnterEvent (QDragEnterEvent *);
 
   /**
    * @return a dragobject encoding the current selection.
    *
    * @see setDragEnabled()
    */
   virtual QDragObject *dragObject();
 
   /**
    * @return true if the @p event provides some acceptable
    * format.
    * A common mistake is to forget the "const" in your reimplementation
    */
   virtual bool acceptDrag (QDropEvent* event) const;
 
   /**
    * Paint the drag line. If painter is null, don't try to :)
    *
    * If after == 0 then the marker should be drawn at the top.
    *
    * @return the rectangle that you painted to.
    */
   virtual QRect drawDropVisualizer (QPainter *p, QListViewItem *parent, QListViewItem *after);
 
   /**
    * Paint the drag rectangle. If painter is null, don't try to :)
    *
    *
    * @return the rectangle that you painted to.
    */
   virtual QRect drawItemHighlighter(QPainter *painter, QListViewItem *item);
 
   /**
    * This method calls @ref dragObject() and starts the drag.
    *
    * Reimplement it to do fancy stuff like setting a pixmap or
    * using a non-default DragMode
    */
   virtual void startDrag();
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void keyPressEvent (QKeyEvent*);
 
   /**
    * Reimplemented for internal reasons.
    * Further reimplementations should call this function or else
    * some features may not work correctly.
    *
    * The API is unaffected.
    */
   virtual void viewportPaintEvent(QPaintEvent*);
 
   /**
    * In FileManager selection mode: explicitely activate the mode
    * in which the current item is automatically selected.
    */
   void activateAutomaticSelection();
   /**
    * In FileManager selection mode: explicitely deactivate the mode
    * in which the current item is automatically selected.
    */
   void deactivateAutomaticSelection();
   /**
    * In FileManager selection mode: return whether it is currently in the mode
    * where the current item is selected automatically.
    * Returns false if items were selected explicitely, e.g. using the mouse.
    */
   bool automaticSelection() const;
 
   /**
    * Reimplemented for setFullWidth()
    */
   virtual void viewportResizeEvent(QResizeEvent* e);
 
 protected slots:
   /**
    * Update internal settings whenever the global ones change.
    * @internal
    */
   void slotSettingsChanged(int);
 
   void slotMouseButtonClicked( int btn, QListViewItem *item, const QPoint &pos, int c );
   void doneEditing(QListViewItem *item, int row);
 
   /**
    * Repaint the rect where I was drawing the drop line.
    */
   void cleanDropVisualizer();
 
   /**
    * Repaint the rect where I was drawing the drop rectangle.
    */
   void cleanItemHighlighter();
 
   /**
    * Emit the @ref contextMenu signal. This slot is for mouse actions.
    */
   void emitContextMenu (QListViewItem*, const QPoint&, int);
 
   /**
    * Emit the @ref #contextMenu signal. This slot is for key presses.
    */
   void emitContextMenu (KListView*, QListViewItem*);
 
   /**
    * Accessory slot for AutoSelect
    * @internal
    */
   void slotOnItem( QListViewItem *item );
 
   /**
    * Accessory slot for AutoSelect/ChangeCursorOverItem
    * @internal
    */
   void slotOnViewport();
 
   /**
    * Process AutoSelection.
    * @internal
    */
   void slotAutoSelect();
 
   void slotDragExpand(); 
 
   /**
    * Reacts to header changes in full width mode
    * @internal
    */
   void slotHeaderChanged();
 
 protected:
   /**
    * Handle dropEvent when itemsMovable() is set to true.
    */
   virtual void movableDropEvent (QListViewItem* parent, QListViewItem* afterme);
 
   /**
    * Where is the nearest QListViewItem that I'm going to drop?
    *
    * FIXME KDE 4.0: Make this method const so it can be called from an
    * acceptDrag method without ugly casts