small kapi fixes

2 files changed, 6 insertions, 1 deletions

diff --git a/bin/kdepim/kaddressbook/germantranslation.txt b/bin/kdepim/kaddressbook/germantranslation.txt
index 5335f47..a3d465f 100644
--- a/bin/kdepim/kaddressbook/germantranslation.txt
+++ b/bin/kdepim/kaddressbook/germantranslation.txt
@@ -653,105 +653,105 @@
 { "Edit Address Book Filter","Editiere Adressbuch Filter" },

 { "Category rule","Kategorie Regel" },

 { "Include categories","Inklusive" },

 { "Exclude categories","Exclusive" },

 { "Include contacts, that are:","Schließe folgende Kontakte ein:" },

 { "public","Öffentlich" },

 { "private","Privat" },

 { "confidential","Vertraulich" },

 { "Configure Resources","Konfiguriere Resourcen" },

 { "Resource Configuration","Resource Konfiguration" },

 { "Resources","Resourcen" },

 { "Standard","Standard" },

 { "&Use as Standard","Setze als Standard" },

 { "Select type of the new resource:","Selektiere Typ der neuen Resource:" },

 { "General Settings","Allgemeine Einstellungen" },

 { "Read-only","Nur-Lesen" },

 { "Include in sync","Schließe in Sync mit ein" },

 { "%1 Resource Settings","%1 Resource Einstellungen" },

 { "Format:","Format:" },

 { "Location:","Ort:" },

 { "Full Menu bar (restart)","Volle Menu Leiste (Neustart!)" },

 { "Language","Sprache" },

 { "Time Format","Zeit Format" },

 { "Time Zone","Zeit Zone" },

 { "Data storage path","Daten Speicherpfad" },

 { "Your current storage dir is:\n%1\nYour mail is stored in:\n(storagedir)/apps/kopiemail/localmail","Aktuelles Speicherverzeichnis ist:\n%1\nIhre Mail wird gespeichert in:\n(speicherverz.)/apps/kopiemail/localmail" },

 { "<b>New data storage dir:</b>","<b>Neues Datenspeicherverzeichnis:</b>" },

 { "New dirs are created automatically","Neue Verzeichnisse werden aut. erstellt" },

 { "Save settings","Speichere Einstellungen" },

 { "Save standard","Speichere Standard" },

 { "Save","Speichern" },

 { "<b>New settings are used\nafter a restart</b>","<b>Neue Einstellungen werden nach\neinem Neustart genutzt</b>" },

 { "Settings are stored in\n%1","Einstellungen werden gespeichert in:\n%1" },

 { "Multiple Sync options","Multi Sync Optionen" },

 { "Sync algo options","Sync Ablauf Optionen" },

 { "Apply filter when adding data to local:","Filter für das Hinzufügen von Daten zu Lokal:" },

 { "Incoming calendar filter:","Eingehender Kalender Filter:" },

 { "Incoming addressbook filter:","Eingehender Adressbuch Filter:" },

 { "Write back options","Optionen zum Zurückschreiben" },

 { "Write back (on remote) existing entries only","Schreibe nur existierende (auf Entfernt) Einträge zurück" },

 { "Apply filter when adding data to remote:","Filter für das Hinzufügen von Daten zu Entfernt:" },

 { "Outgoing calendar filter:","Ausgehender Kalender Filter:" },

 { "Outgoing addressbook filter:","Ausgehender Adressbuch Filter:" },

 { "Write back (calendar) entries for time period only","Schreibe nur Kalender Einträge für Zeitspanne zurück" },

 { "Time period","Zeitspanne" },

 { "From ","Von " },

 { " weeks in the past to "," Wochen in der Vergangenheit bis zu " },

 { " weeks in the future "," Wochen in der Zukunft " },

 { "Profile kind specific settings","Profil Art abhängige Einstellungen" },

 { "Local temp file:","Lokale temp Datei:" },

 { "Multiple profiles with same name!\nPlease use unique profile names!","Mehrere Profile mit demselben Namen!\nBitte verschiedene Namen benutzen!" },

 { "Aborted! Nothing synced!","Abgebrochen! Nichts wurde gesynct!" },

 { "You cannot remove your standard resource!\n Please select a new standard resource first.","Standard Resource kann\nnicht entfernt werden!\nBitte eine andere Resource\nals Standard setzen." },

 { "Sorry","Tut mir leid" },

 { "You cannot use a read-only<br> resource as standard!","Man kann nicht eine read-only<br> Resource als Standard setzen!" },

 { "Please restart to get the \nchanged resources (re)loaded!\n","Bitte starten Sie jetzt\ndas Programm neu, um die geänderten\nResourcen neu zu laden!\n" },

 { "The selected file does not\ninclude a valid vCard.\nPlease check the file and try again.\n","Die gewählte Datei enthält\nkeine gültige vCard.\nBitte prüfen Sie die Datei\nund versuchen es erneut.\n" },

 { "Unable to load resource '%1'","Resource kann nicht geladen werden: '%1'" },

 { "Some changes are only\neffective after a restart!\n","Einige Änderungen werden erst\nnach einem Neustart übernommen!\n" },

 { "Syncing aborted. Nothing synced.","Syncing abgebrochen.Nichts wurde gesynct." },

 { "Connected! Sending request for remote file ...","Verbunden! Sende Daten Anfrage..." },

 { "Trying to connect to remote...","Versuche mit Gegenstelle zu verbinden..." },

 { "Connection to remote\nhost timed out!\nDid you forgot to enable\nsyncing on remote host?","Verbindungsversuch wegen\nZeitüberschreitung gescheitert!\nWurde vergessen Pi-Sync auf\nder Gegenstelle anzuschalten?" },

 { "ERROR: Receiving remote file failed.","FEHLER: Empfang der entfernten Daten fehlgeschlagen." },

 { "Error","Fehler" },

 { ""You entered an invalid date!\n Date changed  to current date.","Ungültiges Datum eingegeben.\nSetze heutiges Datum." },

 { "You entered an invalid date!\n Will use current date instead.","Ungültiges Datum eingegeben.\nSetze stattdessen heutiges Datum." },

 { "Warning","Warnung" },

 { "Select week number","Wähle Wochen Nummer" },

 { "Februar","Februar" },

 { "Pi-Sync options for device: ","Pi-Sync Einstellungen für Gerät: " },

 { "Password for remote access:","Passwort für fernen Zugriff:" },

 { "Remote IP address:","Ferne IP Adresse:" },

 { "Remote port number:","Ferne Port Nummer:" },

 { "Remote file saved to temp file.","Ferne Daten in temp Datei gespeichert." },

 { "Remote from: ","Fern von: " },

 { "Local from: ","Lokal von: " },

 { "Synchronization summary:\n\n %d items added to local\n %d items added to remote\n %d items updated on local\n %d items updated on remote\n %d items deleted on local\n %d items deleted on remote\n %d incoming filtered out\n %d outgoing filtered out\n","Synchronisationsübersicht:\n\n %d lokal hinzugefügt\n %d fern hinzugefügt\n %d lokal geändert\n %d fern geändert\n %d lokal gelöscht\n %d fern gelöscht\n %d eingehende ausgefiltert\n %d ausgehende ausgefiltert\n" },

 { "Local calendar changed!\n","Lokaler Kalender geändert!\n" },

 { "Write back","Schreibe zurück" },

 { "Pi-Sync succesful!","Pi-Sync erfolgreich!" },

 { "Received sync request","Sync Anfrage erhalten" },

 { "Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog.","Ferne Synchronisation ...\n\nBenutze diese Anwendung nicht!\n\nWenn das Syncen fehlschlägt kann\ndieser Dialog geschlossen werden." },

 { "Saving Data to temp file ...","Speichere Daten in temp Datei..." },

 { "Data saved to temp file!","Daten in temp Datei gespeichert!" },

 { "Sending file...","Sende Datei..." },

 { "Waiting for synced file...","Warte auf gesyncte Daten..." },

 { "Receiving synced file...","Gesyncte Daten erhalten..." },

 { "Received %1 bytes","%1 Bytes erhalten" },

 { "Writing file to disk...","Speichere Datei..." },

 { "Pi-Sync successful!","Pi-Sync erfolgreich!" },

 { "Clock skew of\nsyncing devices\nis %1 seconds!","Uhrzeitunterschied der\nsyncenden Geräte\nist %1 Sekunden!" },

 { "Synchronize!","Synchronisiere!" },

 { "High clock skew!","Großer Uhrzeitunterschied!" },

 { "ADJUST\nYOUR\nCLOCKS!","JUSTIERE\nDIE\nUHREN!" },

 { "The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!","Die Uhren der syncenden Geräte\nhaben einen Unterschied von\nmehr als 5 Minuten. Bitte die\nUhrzeiten anpassen. Sie können\nfalsche Sync-Resultate erhalten!\nBitte das Syncen bestätigen!" },

-{ "","" },

+{ "Change search field enable jump bar","Ändere Suchfeld um Jumpbar anzuzeigen" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },
\ No newline at end of file
diff --git a/kaddressbook/kabcore.cpp b/kaddressbook/kabcore.cpp
index 3f7a7da..e8f6132 100644
--- a/kaddressbook/kabcore.cpp
+++ b/kaddressbook/kabcore.cpp
@@ -1350,192 +1350,197 @@ void KABCore::editContact( const QString &uid )
   }
 }
 
 /**
   Shows or edits the detail view for the given uid. If the uid is QString::null,
   the method will try to find a selected addressee in the view.
  */
 void KABCore::executeContact( const QString &uid /*US = QString::null*/ )
 {
   if ( mMultipleViewsAtOnce )
   {
     editContact( uid );
   }
   else
   {
     setDetailsVisible( true );
     mActionDetails->setChecked(true);
   }
 
 }
 
 void KABCore::save()
 {
      if (syncManager->blockSave())
         return;
     if ( !mModified )
         return;
 
     syncManager->setBlockSave(true);
    QString text = i18n( "There was an error while attempting to save\n the "
     "address book. Please check that some \nother application is "
     "not using it. " );
    message(i18n("Saving ... please wait! "), false);
    //qApp->processEvents();
 #ifndef KAB_EMBEDDED
   KABC::StdAddressBook *b = dynamic_cast<KABC::StdAddressBook*>( mAddressBook );
   if ( !b || !b->save() ) {
     KMessageBox::error( this, text, i18n( "Unable to Save" ) );
   }
 #else //KAB_EMBEDDED
   KABC::StdAddressBook *b = (KABC::StdAddressBook*)( mAddressBook );
   if ( !b || !b->save() ) {
     QMessageBox::critical( this, i18n( "Unable to Save" ), text,  i18n("Ok"));
   }
 #endif //KAB_EMBEDDED
 
   message(i18n("Addressbook saved!"));
   setModified( false );
   syncManager->setBlockSave(false);
 }
 
 
 void KABCore::undo()
 {
   UndoStack::instance()->undo();
 
   // Refresh the view
   mViewManager->refreshView();
 }
 
 void KABCore::redo()
 {
   RedoStack::instance()->redo();
 
   // Refresh the view
   mViewManager->refreshView();
 }
 void KABCore::setJumpButtonBar( bool visible )
 {
     setJumpButtonBarVisible(visible );
     saveSettings();
 }
 void KABCore::setJumpButtonBarVisible( bool visible )
 {
   if (mMultipleViewsAtOnce)
   {
     if ( visible )
       mJumpButtonBar->show();
     else
       mJumpButtonBar->hide();
   }
   else
   {
         // show the jumpbar only if "the details are hidden" == "viewmanager are shown"
     if (mViewManager->isVisible())
     {
       if ( visible )
         mJumpButtonBar->show();
       else
         mJumpButtonBar->hide();
         }
         else
         {
       mJumpButtonBar->hide();
         }
   }
+  if ( visible ) {
+      if ( mIncSearchWidget->currentItem() == 0 ) {
+          message( i18n("Change search field enable jump bar") );
+      }
+  }
 }
 
 
 void KABCore::setDetailsToState()
 {
     setDetailsVisible(  mActionDetails->isChecked() );
 }
 void KABCore::setDetailsToggle()
 {
     mActionDetails->setChecked( !mActionDetails->isChecked() );
     setDetailsToState();
 }
 
 
 
 void KABCore::setDetailsVisible( bool visible )
 {
   if (visible && mDetails->isHidden())
   {
     KABC::Addressee::List addrList = mViewManager->selectedAddressees();
     if ( addrList.count() > 0 )
       mDetails->setAddressee( addrList[ 0 ] );
   }
 
   // mMultipleViewsAtOnce=false: mDetails is always visible. But we switch between
   // the listview and the detailview. We do that by changing the splitbar size.
   if (mMultipleViewsAtOnce)
   {
     if ( visible )
       mDetails->show();
     else
       mDetails->hide();
   }
   else
   {
     if ( visible ) {
       mViewManager->hide();
       mDetails->show();
       mIncSearchWidget->setFocus();
     }
     else {
       mViewManager->show();
       mDetails->hide();
       mViewManager->setFocusAV();
     }
     setJumpButtonBarVisible( !visible );
   }
 
 }
 
 void KABCore::extensionChanged( int id )
 {
   //change the details view only for non desktop systems
 #ifndef DESKTOP_VERSION
 
   if (id == 0)
   {
     //the user disabled the extension.
 
     if (mMultipleViewsAtOnce)
     { // enable detailsview again
       setDetailsVisible( true );
       mActionDetails->setChecked( true );
     }
     else
     {  //go back to the listview
       setDetailsVisible( false );
       mActionDetails->setChecked( false );
       mActionDetails->setEnabled(true);
         }
 
   }
   else
   {
     //the user enabled the extension.
     setDetailsVisible( false );
     mActionDetails->setChecked( false );
 
     if (!mMultipleViewsAtOnce)
     {
       mActionDetails->setEnabled(false);
         }
 
     mExtensionManager->setSelectionChanged();
 
   }
 
 #endif// DESKTOP_VERSION
 
 }
 
 
 void KABCore::extensionModified( const KABC::Addressee::List &list )
 {
 
   if ( list.count() != 0 ) {