disabled bluetooth in gammu for linux

1 files changed, 8 insertions, 6 deletions

diff --git a/gammu/emb/cfg/config.h b/gammu/emb/cfg/config.h
index 96de549..1ba6365 100644
--- a/gammu/emb/cfg/config.h
+++ b/gammu/emb/cfg/config.h
@@ -1,172 +1,174 @@
 /* config.h.  Generated by configure.  */
 
 #ifndef _config_h_
 #define _config_h_
 
 /* -------------------------- Gammu specific ---------------------------- */
 
 /* Version of package */
 #define VERSION "0.97.0"
 #define VERSION_WIN "0,97,0,0"
 
 #ifndef _MSC_VER
 /* Define if want DEBUG info */
 /* #undef DEBUG */
 #endif
 
 /* #undef ENABLE_LGPL */
 
 /* ---------------------- Connections ---------------------------------- */
 
 /* MBUS2 over cable */
 #define GSM_ENABLE_MBUS2 1
 
 /* FBUS2 over cable */
 #define GSM_ENABLE_FBUS2 1
 /* FBUS2 to use with DLR3 cable (init done using AT commands) */
 #define GSM_ENABLE_FBUS2DLR3 1
 /* FBUS2 to use with DKU5 cable (init done using AT commands) */
 #define GSM_ENABLE_FBUS2DKU5 1
 /* FBUS2 to use with cable with PL2303 chip (init done using AT commands) */
 #define GSM_ENABLE_FBUS2PL2303 1
 /* FBUS2 to use with bluetooth legacy device (init done using AT commands) */
 #define GSM_ENABLE_FBUS2BLUE 1
 /* FBUS2 to use with direct infrared device */
 #define GSM_ENABLE_FBUS2IRDA 1
 
 /* PHONET FBUS to use with bluetooth legacy device */
 #define GSM_ENABLE_PHONETBLUE 1
 
 /* Symbian with m-router (TCPIP based) to use with bluetooth legacy device */
 #define GSM_ENABLE_MROUTERBLUE 1
 
 /* AT protocol */
 #define GSM_ENABLE_AT 1
 
 /* Alcatel protocol */
 #define GSM_ENABLE_ALCABUS 1
 
 /* Infrared. PHONET FBUS */
 #define GSM_ENABLE_IRDAPHONET 1
 /* Infrared. AT commands */
 #define GSM_ENABLE_IRDAAT 1
 /* Infrared. OBEX */
 #define GSM_ENABLE_IRDAOBEX 1
 
 #ifdef WIN32
 #  define GSM_ENABLE_BLUEFBUS2 1
 #  define GSM_ENABLE_BLUEPHONET 1
 #  define GSM_ENABLE_BLUEAT 1
 #  define GSM_ENABLE_BLUEOBEX 1
 #else
 /* Bluetooth stack (like Bluez). FBUS2 (init done using AT commands) */
-#  define GSM_ENABLE_BLUEFBUS2 1
+//LR#  define GSM_ENABLE_BLUEFBUS2 1
 /* Bluetooth stack (like Bluez). PHONET FBUS */
-#  define GSM_ENABLE_BLUEPHONET 1
+//LR#  define GSM_ENABLE_BLUEPHONET 1
 /* Blueooth stack (like Bluez). AT commands */
-#  define GSM_ENABLE_BLUEAT 1
+//LR#  define GSM_ENABLE_BLUEAT 1
 /* Blueooth stack (like Bluez). OBEX */
-#  define GSM_ENABLE_BLUEOBEX 1
+//LR#  define GSM_ENABLE_BLUEOBEX 1
 #endif
 
 /* --------------------------- Phone modules (specific) ----------------- */
 
 /* n3320.c models */
 #define GSM_ENABLE_NOKIA3320 1
 /* n6110.c models */
 #define GSM_ENABLE_NOKIA6110 1
 
 /* n7110.c models */
 #define GSM_ENABLE_NOKIA7110 1
 /* n9210.c models */
 #define GSM_ENABLE_NOKIA9210 1
 /* It allows to show incoming call and SMS info for 7110 family phones.
  * By default commented: you can have some problems, when using it.
  * Example: with my 6210 after using it info about incoming sms is shown much
  * earlier than sms in phone and phone restart (once and random) later after
  * connection. Seems phone firmware isn't too good here
  */
 /* Show incoming Data for 7110/9210 */
 /* #undef GSM_ENABLE_N71_92INCOMINGINFO */
 
 /* n6510.c (DCT4) models */
 #define GSM_ENABLE_NOKIA6510 1
 /* Force using 6210 frames for calendar. Required by some older DCT4 */
 /* #undef GSM_FORCE_DCT4_CALENDAR_6210 */
 
 /* n3650.c (DCT4 with Symbian) models */
 #define GSM_ENABLE_NOKIA3650 1
 
 /* AT generic models */
 #define GSM_ENABLE_ATGEN 1
 
 /* Alcatel BE5 */
 #define GSM_ENABLE_ALCATEL 1
 
 /* OBEX generic models */
 #define GSM_ENABLE_OBEXGEN 1
 
 /* Symbian with m-router generic models */
 #define GSM_ENABLE_MROUTERGEN 1
 
 /* ---------------------- General settings -------------------------------- */
 
 /* By default commented: some people reported me (for example, with 6210
  * and 3210), that their phones doesn't answer at all sometimes or answer
  * with (too) long delay. Possible reason: firmware in phone is too slow
  * I didn't have such problems personally with phone and PC with Celeron 800
  * Please also note, that CB function was always TO CHECK in MyGnokii/Gnokii
  * too.
  */
 /* Enables cell broadcast */
 /* #undef GSM_ENABLE_CELLBROADCAST */
 
 /* If you want backup/restore stuff. Some people wanted it - they required
  * smalled library made from Gammu and didn't require it. Please note,
  * that backup/restore stuff can be easy separated from other things.
  */
 #define GSM_ENABLE_BACKUP 1
 
 /* Bu default commented: some parts of source are not ready or not tested
  * at all (or aren't good tested). Uncomment, if want them
  */
 //#define DEVELOP
 
 /* By default disabled. It allows to making short beep after such things
  * like changing logo in phone (like in Logo Manager)
  */
 //#define GSM_ENABLE_BEEP
 
 /* ---------------------- C language specific --------------------------- */
 
 #ifndef WIN32
 /* are the scandir functions available */
 #  define HAVE_DIRENT_H 1
 #  define HAVE_SCANDIR 1
 #  define HAVE_ALPHASORT 1
 
 #  define HAVE_PTHREAD 1
 #  define HAVE_SYS_IOCTL_H 1
 #  define HAVE_MYSQL_MYSQL_H 1
 #endif
 
 #define HAVE_ISWSPACE 1
 #define HAVE_TOWLOWER 1
 
 #ifndef WIN32
 /* Will be used Bluez BT stack ? */
-#  define GSM_ENABLE_BLUEZ 1
+// LR bluetooth disabled
+//#  define GSM_ENABLE_BLUEZ 1
 /* Will be used Affix BT stack ? */
 /* #  undef GSM_ENABLE_AFFIX */
 #endif
 
 /* Uncomment, if you want searching RF channel during each BT connection */
 /* It can make connecting longer or connection less stable */
 /* With MS VC and MS BT stack required irprops.lib from MS Platform SDK to compile */
 #ifndef WIN32
-#  define BLUETOOTH_RF_SEARCHING 1
+// LR bluetooth disabled
+//#  define BLUETOOTH_RF_SEARCHING 1
 #else
 //#  define BLUETOOTH_RF_SEARCHING 1
 #endif
 
 #endif