gammu updates

4 files changed, 447 insertions, 25 deletions

diff --git a/gammu/emb/common/device/serial/ser_djg.c b/gammu/emb/common/device/serial/ser_djg.c
index 2524187..609deb8 100644
--- a/gammu/emb/common/device/serial/ser_djg.c
+++ b/gammu/emb/common/device/serial/ser_djg.c
@@ -1,3 +1,8 @@
+/* Some sources from SVAsync (c) 1996, 1997, Samuel Vincent
+ * 7337 Carioca Ct, Rohnert Park, Ca 94928
+ * "you may freely use it in your programs without paying me anything"
+ */
+/* Some sources from DZCOMM */
 
 #include "../../gsmstate.h"
 
@@ -5,55 +10,419 @@
 #ifdef DJGPP
 
 #include "../../gsmcomon.h"
+#include "../../misc/coding/coding.h"
 #include "ser_djg.h"
 
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <dos.h>
+#include <dpmi.h>
+#include <pc.h>
+#include <go32.h>
+#include <sys/farptr.h>
+#include <sys/movedata.h>
+#include <conio.h>
+
+extern unsigned short __djgpp_ds_alias;
+extern void SVAsyncProtISR(void);
+
+static unsigned char SVAsyncStatus=0;
+
+static void lock_interrupt_memory(void);
+static void unlock_interrupt_memory(void);
+
+        #define Ctrl8259_0 0x020           /* 8259 port */
+        #define Ctrl8259_1 0x021           /* 8259 port (Masks) */
+        #define BufSize 32768           /* Buffer Size */
+
+static unsigned char VectorNum;         /* Vector Number */
+static unsigned char EnableIRQ;         /* Mask to enable 8259 IRQ */
+static unsigned char DisableIRQ;        /* Mask to disable 8259 IRQ */
+static _go32_dpmi_seginfo ProtVector;   /* Old Protmode Vector */
+static _go32_dpmi_seginfo info;         /* New Protmode Vector */
+
+/* Register Addresses for the UART */
+static unsigned short Port;             /* Port Base Address */
+unsigned short THR;                     /* Transmitter Holding Register */
+unsigned short RDR;                     /* Reciever Data Register */
+unsigned short BRDL;                    /* Baud Rate Divisor, Low byte */
+unsigned short BRDH;                    /* Baud Rate Divisor, High Byte */
+unsigned short IER;                     /* Interupt Enable Register */
+unsigned short IIR;                     /* Interupt Identification Register */
+unsigned short FCR;                     /* FIFO Control Register */
+unsigned short LCR;                     /* Line Control Register */
+unsigned short MCR;                     /* Modem Control Register */
+unsigned short LSR;                     /* Line Status Register */
+unsigned short MSR;                     /* Modem Status Register */
+unsigned short SCR;                     /* SCR Register */
+
+/* Data Buffer */
+        unsigned volatile char RecBuffer[BufSize] = { 0 };
+        unsigned volatile int RecHead, RecTail;
+
+/* This uninstalls the ISR and resets the serial port. */
+static void SVAsyncStop(void) 
+{
+        if(!SVAsyncStatus) return;
+        SVAsyncStatus = 0;
+
+        /***** Mask (disable) 8259 IRQ Interrupt */
+        outportb(Ctrl8259_1, (inportb(Ctrl8259_1) | DisableIRQ));
+
+        /***** Disable 8250 interrupt */
+        outportb(LCR, (inportb(LCR) & 0x7F));
+        outportb(IER, 0);
+
+        /***** Set bit 3 in MCR to 0 */
+        outportb(MCR, (inportb(MCR) & 0xF7));
+
+        /***** Interrupts are disabled.  Restore saved interrupt vector. */
+        _go32_dpmi_set_protected_mode_interrupt_vector(VectorNum, &ProtVector);
+}
+
+/* This will empty the receive buffer */
+static void SVAsyncClear(void) 
+{
+        disable();
+        RecHead = 0;
+        RecTail = 0;
+        enable();
+}
+
+
+/* Sets communication parameters
+ * Baud = 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 28800, 38400, 57600
+ * Control = The value to place in the LCR
+ */
+void SVAsyncSet(unsigned int Baud, unsigned int Control) 
+{
+                int     divisor;
+                unsigned char divlow, divhigh;
+
+        if (!Baud) return;
+        
+        divisor = 115200 / Baud;
+
+        disable();
+        
+                outportb(LCR, Control | 0x80);          /* Set Port Toggle to BRDL/BRDH registers */
+        divlow = divisor & 0x000000ff;
+        divhigh = (divisor >> 8) & 0x000000ff;
+                outportb(BRDL, divlow);         /* Set Baud Rate */
+        outportb(BRDH, divhigh);
+
+        outportb(LCR, Control & 0x007F);        /* Set LCR and Port Toggle */
+
+        enable();
+}
+
+/* Sets various handshaking lines */
+void SVAsyncHand(unsigned int Hand) 
+{
+        outportb(MCR, Hand | 0x08);  /* Keep interrupt enable ON */
+}
+
+static void lock_interrupt_memory(void) 
+{
+                int     errval;
+                __dpmi_meminfo info;
+                unsigned long address;
+        
+        __dpmi_get_segment_base_address(_my_ds(), &address);
+
+        info.address = (int) address + (int) &RDR;
+        info.size = sizeof(RDR);
+        errval = __dpmi_lock_linear_region(&info);
+        if(errval == -1) printf("Error in locking memory\n!");
+
+        info.address = (int) address + (int) &LSR;
+        info.size = sizeof(LSR);
+        errval = __dpmi_lock_linear_region(&info);
+        if(errval == -1) printf("Error in locking memory\n!");
+
+        info.address = (int) address + (int) &RecHead;
+        info.size = sizeof(RecHead);
+        errval = __dpmi_lock_linear_region(&info);
+        if(errval == -1) printf("Error in locking memory\n!");
+
+        info.address = (int) address + (int) &RecBuffer;
+        info.size = sizeof(RecBuffer);
+        errval = __dpmi_lock_linear_region(&info);
+        if(errval == -1) printf("Error in locking memory\n!");
+
+        info.address = (int) address + (int) RecBuffer;
+        info.size = BufSize;
+        errval = __dpmi_lock_linear_region(&info);
+        if(errval == -1) printf("Error in locking memory\n!");
+        
+        __dpmi_get_segment_base_address(_my_cs(), &address);
+        
+        info.address = (int) address + (int) SVAsyncProtISR;
+        info.size = 4096; /* 4096 bytes is probably overkill. */
+        errval = __dpmi_lock_linear_region(&info);
+        if(errval == -1) printf("Error in locking memory\n!");
+}
+
+static void unlock_interrupt_memory(void) 
+{
+                __dpmi_meminfo info;
+                unsigned long address;
+        
+        __dpmi_get_segment_base_address(_my_ds(), &address);
+        info.address = (int) address + (int) &RDR;
+        info.size = sizeof(RDR);
+        __dpmi_unlock_linear_region(&info);
+        info.address = (int) address + (int) &LSR;
+        info.size = sizeof(LSR);
+        __dpmi_unlock_linear_region(&info);
+        info.address = (int) address + (int) &RecHead;
+        info.size = sizeof(RecHead);
+        __dpmi_unlock_linear_region(&info);
+        info.address = (int) address + (int) &RecBuffer;
+        info.size = sizeof(RecBuffer);
+        __dpmi_unlock_linear_region(&info);
+        info.address = (int) address + (int) RecBuffer;
+        info.size = BufSize;
+        __dpmi_unlock_linear_region(&info);
+        
+        __dpmi_get_segment_base_address(_my_cs(), &address);
+        
+        info.address = (int) address + (int) SVAsyncProtISR;
+        info.size = 4096; /* probably overkill */
+        __dpmi_unlock_linear_region(&info);
+}
+
 static GSM_Error serial_close(GSM_StateMachine *s)
 {
-            GSM_Device_SerialData *d = &s->Device.Data.Serial;
+        SVAsyncStop();
 
-        return ERR_NOTIMPLEMENTED;
+        return ERR_NONE;
 }
 
 static GSM_Error serial_open (GSM_StateMachine *s)
 {
-            GSM_Device_SerialData *d = &s->Device.Data.Serial;
-    
-        return ERR_NOTIMPLEMENTED;
+                GSM_Device_SerialData *d = &s->Device.Data.Serial;
+                unsigned char   temp;
+                int             i;
+
+        /**** Set various things according to com port number */
+        if (mystrncasecmp(s->CurrentConfig->Device,"com1:",0)) {
+                        Port    = 0x03F8;
+                        VectorNum = 0x0C;
+                        EnableIRQ = 0xEF;
+                        DisableIRQ = 0x10;
+        } else if (mystrncasecmp(s->CurrentConfig->Device,"com2:",0)) {
+                        Port    = 0x02F8;
+                        VectorNum = 0x0B;
+                        EnableIRQ = 0xF7;
+                        DisableIRQ = 0x08;
+        } else if (mystrncasecmp(s->CurrentConfig->Device,"com3:",0)) {
+                        Port    = 0x03E8;
+                        VectorNum = 0x0C;
+                        EnableIRQ = 0xEF;
+                        DisableIRQ = 0x10;
+        } else if (mystrncasecmp(s->CurrentConfig->Device,"com4:",0)) {
+                        Port    = 0x02E8;
+                        VectorNum = 0x0B;
+                        EnableIRQ = 0xF7;
+                        DisableIRQ = 0x08;
+        } else return ERR_NOTSUPPORTED;
+
+                /**** Compute Register locations */
+                THR = Port;
+                RDR = Port;
+                BRDL = Port;
+                BRDH = 1 + Port;
+                IER = 1 + Port;
+                IIR = 2 + Port;
+                FCR = 2 + Port;
+                LCR = 3 + Port;
+                MCR = 4 + Port;
+                LSR = 5 + Port;
+                MSR = 6 + Port;
+                SCR = 7 + Port;
+
+        /***** Initalize Buffer */
+        SVAsyncClear();
+        
+        lock_interrupt_memory();
+        atexit(unlock_interrupt_memory);
+        /***** Set bit 3 in MCR to 0 */
+        outportb(MCR, (inportb(MCR) & 0xF7));
+
+        /*** Save and reassign interrupt vectors */
+        
+        _go32_dpmi_get_protected_mode_interrupt_vector(VectorNum, &ProtVector);
+        
+        info.pm_offset = (int) SVAsyncProtISR;
+        info.pm_selector = _my_cs();
+        _go32_dpmi_set_protected_mode_interrupt_vector(VectorNum, &info);
+        
+        atexit(SVAsyncStop);
+
+        /***** Enable 8259 interrupt (IRQ) line for this async adapter */
+        outportb(Ctrl8259_1, (inportb(Ctrl8259_1) & EnableIRQ));
+
+        /***** Enable 8250 Interrupt-on-data-ready */
+        outportb(LCR, (inportb(LCR) & 0x7F));
+        
+        outportb(IER, 0);
+        if (inportb(IER)) {
+                SVAsyncStatus = 0;
+                return ERR_UNKNOWN;
+        }
+        outportb(IER, 0x01);
+
+        /***** Clear 8250 Status and data registers */
+        do {
+                temp=inportb(RDR);
+                temp=inportb(LSR);
+                temp=inportb(MSR);
+                temp=inportb(IIR);
+        } while(!(temp & 1));
+
+        /***** Set Bit 3 of MCR -- Enable interupts */
+        outportb(MCR, (inportb(MCR) | 0x08));
+
+        SVAsyncStatus = 1;
+        /***** Clear Buffer Just in case */
+        SVAsyncClear();
+
+           /* Code based on stuff from SVAsync lib.
+             * Clear UART Status and data registers
+             * setting up FIFO if possible
+             */
+           outportb(SCR, 0x55);
+           if (inportb(SCR) == 0x55) {
+                /* On the off chance that SCR is actually hardwired to 0x55,
+                 * do the same check with a different value.
+                 */
+                outportb(SCR, 0xAA);
+                if (inportb(SCR) == 0xAA) {
+                        /* The chip is better than an 8250 - it has a scratch pad */
+                        outportb(SCR, i); /* Set SCR back to what it was before */
+                        inportb(SCR);     /* Give slow motherboards a chance    */
+      
+                        /* Is there a FIFO ? - go through twice for slow motherboards */
+                        outportb(FCR, 0x01);
+                        i = inportb(FCR);
+                        outportb(FCR, 0x01);
+                        i = inportb(FCR);
+
+                        /* Some old stuff relies on this (no idea why) */
+                        outportb(FCR, 0x00);
+                        inportb(FCR); /* Give slow motherboards a chance */
+
+                        if ((i&0x80) == 0) {
+                                smprintf(s,"UART 16450 or UART 8250 with scratch pad\n");
+                        } else if ((i&0x40) == 0) {
+                                smprintf(s,"UART 16550 - broken FIFO\n");
+                        } else {
+                                /* It's a 16450A series : try and start the FIFO.
+                                * It appears that some chips need a two call protocol, but
+                                * those that don't seem to work even if you do start it
+                                * twice. The first call is simply to start it, the second
+                                * starts it and sets an 8 byte FIFO trigger level.
+                                */
+                                outportb(FCR, 0x01);
+                                inportb(FCR); /* Give slow motherboards a chance */
+                                outportb(FCR, 0x87);
+                                inportb(FCR); /* Give slow motherboards a chance */
+        
+                                /* Check that the FIFO initialised */
+                                if ((inportb(IIR) & 0xc0) != 0xc0) {
+                                                /*
+                                         * It didn't so we assume it isn't there but disable it to
+                                         * be on the safe side.
+                                         */
+                                                outportb(IIR, 0xfe);
+                                                inportb(IIR); /* Give slow motherboards a chance */
+                                        smprintf(s,"UART 16450A - FIFO disabled\n");
+                                } else {
+                                        smprintf(s,"UART 16450A - FIFO enabled\n");
+                                }
+                        }
+                } else {
+                        smprintf(s,"UART 8250\n");
+                }
+        }
+
+                d->Control = BITS_8 | STOP_1;
+                d->Parity = false;
+                d->Speed = 9600;
+        SVAsyncSet(d->Speed,d->Control | NO_PARITY);
+
+        return ERR_NONE;
 }
 
 static GSM_Error serial_setparity(GSM_StateMachine *s, bool parity)
 {
             GSM_Device_SerialData *d = &s->Device.Data.Serial;
 
-        return ERR_NOTIMPLEMENTED;
+        d->Parity = parity;
+
+        if (parity) {
+                SVAsyncSet(d->Speed, d->Control | ODD_PARITY);
+        } else {
+                SVAsyncSet(d->Speed, d->Control | NO_PARITY);
+        }
+
+        return ERR_NONE;
 }
 
 static GSM_Error serial_setdtrrts(GSM_StateMachine *s, bool dtr, bool rts)
 {
-            GSM_Device_SerialData *d = &s->Device.Data.Serial;
+        if (dtr && rts) {
+                SVAsyncHand(DTR | RTS);
+        } else if (dtr) {
+                SVAsyncHand(DTR);
+        } else if (rts) {
+                SVAsyncHand(RTS);
+        } else {
+                SVAsyncHand(0);
+        }
 
-        return ERR_NOTIMPLEMENTED;
+        return ERR_NONE;
 }
 
 static GSM_Error serial_setspeed(GSM_StateMachine *s, int speed)
 {
             GSM_Device_SerialData *d = &s->Device.Data.Serial;
 
-        return ERR_NOTIMPLEMENTED;
+        d->Speed = speed;
+
+        if (d->Parity) {
+                SVAsyncSet(d->Speed, d->Control | ODD_PARITY);
+        } else {
+                SVAsyncSet(d->Speed, d->Control | NO_PARITY);
+        }
+
+        return ERR_NONE;
 }
 
-static int serial_read(GSM_StateMachine *s, void *buf, size_t nbytes)
+static int serial_read(GSM_StateMachine *s, char *buf, size_t nbytes)
 {
-            GSM_Device_SerialData *d = &s->Device.Data.Serial;
+        if(RecTail == RecHead) return 0;
+
+        disable();
+        buf[0] = RecBuffer[RecTail++];
+        if(RecTail >= BufSize) RecTail = 0;
+        enable();
 
-            return 0;
+        return 1;
 }
 
-static int serial_write(GSM_StateMachine *s, void *buf, size_t nbytes)
+static int serial_write(GSM_StateMachine *s, char *buf, size_t nbytes)
 {
-            GSM_Device_SerialData *d = &s->Device.Data.Serial;
+        int i;
+
+        for (i=0;i<nbytes;i++) {
+                while(~inportb(LSR) & 0x20);
+                outportb(THR, buf[i]);
+        }
 
-            return 0;
+            return i;
 }
 
 GSM_Device_Functions SerialDevice = {
diff --git a/gammu/emb/common/device/serial/ser_djg.h b/gammu/emb/common/device/serial/ser_djg.h
index b35b282..3bb2a5b 100644
--- a/gammu/emb/common/device/serial/ser_djg.h
+++ b/gammu/emb/common/device/serial/ser_djg.h
@@ -1,12 +1,47 @@
+/* Some sources from SVAsync (c) 1996, 1997, Samuel Vincent
+ * 7337 Carioca Ct, Rohnert Park, Ca 94928
+ * "you may freely use it in your programs without paying me anything"
+ */
 
 #ifdef DJGPP
 #ifndef djgppserial_h
 #define djgppserial_h
 
 typedef struct {
-                int hPhone;
+                int     hPhone;
+                int     Speed;
+                unsigned int Control;
+                bool    Parity;
 } GSM_Device_SerialData;
 
+/* Defines for Com Port Paramaters, the second paramater to SVAsyncSet() */
+#define BITS_8          0x03
+#define BITS_7          0x02
+#define STOP_1          0x00
+#define STOP_2          0x04
+#define EVEN_PARITY     0x18
+#define ODD_PARITY      0x08
+#define NO_PARITY       0x00
+
+/* Defines for SVAsyncHand() */
+#define DTR             0x01
+#define RTS             0x02
+#define USER            0x04
+#define LOOPBACK        0x10
+
+/* Defines for SVAsyncStat() */
+        #define D_CTS   0x0100
+        #define D_DSR   0x0200
+#define D_RI            0x0400
+        #define D_DCD   0x0800
+#define CTS             0x1000
+#define DSR             0x2000
+#define RI              0x4000
+#define DCD             0x8000
+        #define PARITY  0x0004
+#define THREMPTY        0x0020
+#define BREAKDET        0x1000
+
 #endif
 #endif
 
diff --git a/gammu/emb/common/device/serial/ser_unx.c b/gammu/emb/common/device/serial/ser_unx.c
index 69c7515..18b5f6f 100644
--- a/gammu/emb/common/device/serial/ser_unx.c
+++ b/gammu/emb/common/device/serial/ser_unx.c
@@ -4,6 +4,15 @@
  * (C) 1999-2000 Hugh Blemings & Pavel Janik ml. (C) 2001-2004 Pawel Kot 
  * GNU GPL version 2 or later
  */
+/* Due to a problem in the source code management, the names of some of
+ * the authors have unfortunately been lost. We do not mean to belittle
+ * their efforts and hope they will contact us to see their names
+ * properly added to the Copyright notice above.
+ * Having published their contributions under the terms of the GNU
+ * General Public License (GPL) [version 2], the Copyright of these
+ * authors will remain respected by adhering to the license they chose
+ * to publish their code under.
+ */
 
 #include "../../gsmstate.h"
 
@@ -60,8 +69,8 @@ static GSM_Error serial_close(GSM_StateMachine *s)
 static GSM_Error serial_open (GSM_StateMachine *s)
 {
         GSM_Device_SerialData   *d = &s->Device.Data.Serial;
-                struct termios  t;
-                int                 i;
+                struct termios    t;
+                int             i;
 
         /* O_NONBLOCK MUST is required to avoid waiting for DCD */
         d->hPhone = open(s->CurrentConfig->Device, O_RDWR | O_NOCTTY | O_NONBLOCK);
@@ -124,7 +133,7 @@ static GSM_Error serial_open (GSM_StateMachine *s)
 static GSM_Error serial_setparity(GSM_StateMachine *s, bool parity)
 {
             GSM_Device_SerialData   *d = &s->Device.Data.Serial;
-                struct termios  t;
+                struct termios    t;
 
             if (tcgetattr(d->hPhone, &t)) {
                 GSM_OSErrorInfo(s,"tcgetattr in serial_setparity");
@@ -150,8 +159,8 @@ static GSM_Error serial_setparity(GSM_StateMachine *s, bool parity)
 static GSM_Error serial_setdtrrts(GSM_StateMachine *s, bool dtr, bool rts)
 {
             GSM_Device_SerialData   *d = &s->Device.Data.Serial;
-                struct termios  t;
-                unsigned int    flags;
+                struct termios    t;
+                unsigned int        flags;
 
             if (tcgetattr(d->hPhone, &t)) {
                 GSM_OSErrorInfo(s,"tcgetattr in serial_setdtrrts");
@@ -264,8 +273,8 @@ static int serial_read(GSM_StateMachine *s, void *buf, size_t nbytes)
 {
                 GSM_Device_SerialData   *d = &s->Device.Data.Serial;
                 struct timeval          timeout2;
-                fd_set          readfds;
-                int             actual = 0;
+                fd_set                  readfds;
+                int                     actual = 0;
 
             FD_ZERO(&readfds);
             FD_SET(d->hPhone, &readfds);
@@ -283,8 +292,8 @@ static int serial_read(GSM_StateMachine *s, void *buf, size_t nbytes)
 static int serial_write(GSM_StateMachine *s, void *buf, size_t nbytes)
 {
             GSM_Device_SerialData   *d = &s->Device.Data.Serial;
-                int          ret;
-                size_t    actual = 0;
+                int                  ret;
+                size_t            actual = 0;
 
             do {
                 ret = write(d->hPhone, (unsigned char *)buf, nbytes - actual);
diff --git a/gammu/emb/common/device/serial/ser_w32.c b/gammu/emb/common/device/serial/ser_w32.c
index 7d88fc7..a7919fe 100644
--- a/gammu/emb/common/device/serial/ser_w32.c
+++ b/gammu/emb/common/device/serial/ser_w32.c
@@ -4,6 +4,15 @@
  * (C) 1999-2000 Hugh Blemings & Pavel Janik ml. (C) 2001-2004 Pawel Kot 
  * GNU GPL version 2 or later
  */
+/* Due to a problem in the source code management, the names of some of
+ * the authors have unfortunately been lost. We do not mean to belittle
+ * their efforts and hope they will contact us to see their names
+ * properly added to the Copyright notice above.
+ * Having published their contributions under the terms of the GNU
+ * General Public License (GPL) [version 2], the Copyright of these
+ * authors will remain respected by adhering to the license they chose
+ * to publish their code under.
+ */
 
 #include "../../gsmstate.h"