summaryrefslogtreecommitdiffabout
Side-by-side diff
Diffstat (more/less context) (show whitespace changes)
-rw-r--r--libkdepim/ksyncmanager.cpp86
-rw-r--r--libkdepim/ksyncmanager.h7
2 files changed, 70 insertions, 23 deletions
diff --git a/libkdepim/ksyncmanager.cpp b/libkdepim/ksyncmanager.cpp
index d8ca3ba..47d00a4 100644
--- a/libkdepim/ksyncmanager.cpp
+++ b/libkdepim/ksyncmanager.cpp
@@ -1057,37 +1057,47 @@ void KSyncManager::syncPi()
}
bool ok;
Q_UINT16 port = mActiveSyncPort.toUInt(&ok);
if ( ! ok ) {
mParent->topLevelWidget()->setCaption( i18n("Sorry, no valid port.Syncing cancelled.") );
mPisyncFinished = true;
return;
}
KCommandSocket* commandSocket = new KCommandSocket( mPassWordPiSync, port, mActiveSyncIP, this, mParent->topLevelWidget() );
connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int )), this, SLOT(deleteCommandSocket(KCommandSocket*, int)) );
commandSocket->readFile( syncFileName() );
}
void KSyncManager::deleteCommandSocket(KCommandSocket*s, int state)
{
//enum { success, errorW, errorR, quiet };
- if ( state == KCommandSocket::errorR ||state == KCommandSocket::errorTO ||state == KCommandSocket::errorPW ) {
+
+
+
+ if ( state == KCommandSocket::errorR ||state == KCommandSocket::errorTO ||state == KCommandSocket::errorPW ||
+ state == KCommandSocket::errorCA ||state == KCommandSocket::errorFI ||state == KCommandSocket::errorUN ) {
if ( state == KCommandSocket::errorPW )
mParent->topLevelWidget()->setCaption( i18n("Wrong password: Receiving remote file failed.") );
- else
+ else if ( state == KCommandSocket::errorR ||state == KCommandSocket::errorTO )
mParent->topLevelWidget()->setCaption( i18n("ERROR: Receiving remote file failed.") );
+ else if ( state == KCommandSocket::errorCA )
+ mParent->topLevelWidget()->setCaption( i18n("Sync cancelled from remote.") );
+ else if ( state == KCommandSocket::errorFI )
+ mParent->topLevelWidget()->setCaption( i18n("File error on remote.") );
+ else if ( state == KCommandSocket::errorUN )
+ mParent->topLevelWidget()->setCaption( i18n("Unknown error on remote.") );
delete s;
if ( state == KCommandSocket::errorR ) {
KCommandSocket* commandSocket = new KCommandSocket( mPassWordPiSync, mActiveSyncPort.toUInt(), mActiveSyncIP, this, mParent->topLevelWidget());
connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int)), this, SLOT(deleteCommandSocket(KCommandSocket*, int )) );
commandSocket->sendStop();
}
mPisyncFinished = true;
return;
} else if ( state == KCommandSocket::errorW ) {
mParent->topLevelWidget()->setCaption( i18n("ERROR:Writing back file failed.") );
mPisyncFinished = true;
} else if ( state == KCommandSocket::successR ) {
QTimer::singleShot( 1, this , SLOT ( readFileFromSocket()));
@@ -1119,186 +1129,205 @@ void KSyncManager::readFileFromSocket()
if ( mWriteBackFile && syncOK )
commandSocket->writeFile( fileName );
else {
commandSocket->sendStop();
if ( syncOK )
mParent->topLevelWidget()->setCaption( i18n("Pi-Sync succesful!") );
mPisyncFinished = true;
}
}
KServerSocket:: KServerSocket ( QString pw, Q_UINT16 port, int backlog, QObject * parent, const char * name ) : QServerSocket( port, backlog, parent, name )
{
mPassWord = pw;
mSocket = 0;
mSyncActionDialog = 0;
blockRC = false;
+ mErrorMessage = 0;
}
void KServerSocket::newConnection ( int socket )
{
// qDebug("KServerSocket:New connection %d ", socket);
if ( mSocket ) {
qDebug("KSS::newConnection Socket deleted! ");
delete mSocket;
mSocket = 0;
}
mSocket = new QSocket( this );
connect( mSocket , SIGNAL(readyRead()), this, SLOT(readClient()) );
connect( mSocket , SIGNAL(delayedCloseFinished()), this, SLOT(discardClient()) );
mSocket->setSocket( socket );
}
void KServerSocket::discardClient()
{
- //qDebug(" KServerSocket::discardClient()");
+ QTimer::singleShot( 10, this , SLOT ( deleteSocket()));
+}
+void KServerSocket::deleteSocket()
+{
+ qDebug("KSS::deleteSocket");
if ( mSocket ) {
delete mSocket;
mSocket = 0;
}
- //emit endConnect();
+ if ( mErrorMessage )
+ QTimer::singleShot( 10, this , SLOT ( displayErrorMessage()));
}
void KServerSocket::readClient()
{
if ( blockRC )
return;
if ( mSocket == 0 ) {
qDebug("ERROR::KSS::readClient(): mSocket == 0 ");
return;
}
+ if ( mErrorMessage ) {
+ mErrorMessage = 999;
+ error_connect("ERROR_UN\r\n\r\n");
+ return;
+ }
+ mErrorMessage = 0;
//qDebug("KServerSocket::readClient()");
if ( mSocket->canReadLine() ) {
QString line = mSocket->readLine();
//qDebug("KServerSocket readline: %s ", line.latin1());
QStringList tokens = QStringList::split( QRegExp("[ \r\n][ \r\n]*"), line );
if ( tokens[0] == "GET" ) {
if ( tokens[1] == mPassWord ) {
//emit sendFile( mSocket );
bool ok = false;
QDateTime dt = KGlobal::locale()->readDateTime( tokens[2], KLocale::ISODate, &ok);
if ( ok ) {
KSyncManager::mRequestedSyncEvent = dt;
}
else
KSyncManager::mRequestedSyncEvent = QDateTime();
send_file();
}
else {
- error_connect();
- KMessageBox::error( 0, i18n("Got send file request\nwith invalid password"));
- //qDebug("password %s, invalid password %s ",mPassWord.latin1(), tokens[1].latin1() );
+ mErrorMessage = 1;
+ error_connect("ERROR_PW\r\n\r\n");
}
}
if ( tokens[0] == "PUT" ) {
if ( tokens[1] == mPassWord ) {
//emit getFile( mSocket );
blockRC = true;
get_file();
}
else {
- error_connect();
+ mErrorMessage = 2;
+ error_connect("ERROR_PW\r\n\r\n");
end_connect();
- KMessageBox::error( 0, i18n("Got receive file request\nwith invalid password"));
- //qDebug("password %s, invalid password %s ",mPassWord.latin1(), tokens[1].latin1() );
}
}
if ( tokens[0] == "STOP" ) {
//emit endConnect();
end_connect();
}
}
}
-void KServerSocket::error_connect()
+void KServerSocket::displayErrorMessage()
+{
+ if ( mErrorMessage == 1 )
+ KMessageBox::error( 0, i18n("Got send file request\nwith invalid password"));
+ else if ( mErrorMessage == 2 )
+ KMessageBox::error( 0, i18n("Got receive file request\nwith invalid password"));
+ mErrorMessage = 0;
+}
+void KServerSocket::error_connect( QString errmess )
{
QTextStream os( mSocket );
os.setEncoding( QTextStream::Latin1 );
- os << "ERROR_PW\r\n\r\n";
+ os << errmess ;
mSocket->close();
- if ( mSocket->state() == QSocket::Idle )
- QTimer::singleShot( 10, this , SLOT ( discardClient()));
+ if ( mSocket->state() == QSocket::Idle ) {
+ QTimer::singleShot( 0, this , SLOT ( discardClient()));
+ }
}
void KServerSocket::end_connect()
{
delete mSyncActionDialog;
mSyncActionDialog = 0;
}
void KServerSocket::send_file()
{
//qDebug("MainWindow::sendFile(QSocket* s) ");
if ( mSyncActionDialog )
delete mSyncActionDialog;
mSyncActionDialog = new QDialog ( 0, "input-dialog", true );
mSyncActionDialog->setCaption(i18n("Received sync request"));
QLabel* label = new QLabel( i18n("Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog."), mSyncActionDialog );
label->setAlignment ( Qt::AlignHCenter );
QVBoxLayout* lay = new QVBoxLayout( mSyncActionDialog );
lay->addWidget( label);
lay->setMargin(7);
lay->setSpacing(7);
if ( KSyncManager::mRequestedSyncEvent.isValid() ) {
int secs = QDateTime::currentDateTime().secsTo( KSyncManager::mRequestedSyncEvent );
+ secs = 333;
if ( secs < 0 )
secs = secs * (-1);
if ( secs > 30 )
//if ( true )
{
QString warning = i18n("Clock skew of\nsyncing devices\nis %1 seconds!").arg( secs );
QLabel* label = new QLabel( warning, mSyncActionDialog );
label->setAlignment ( Qt::AlignHCenter );
lay->addWidget( label);
if ( secs > 180 )
{
if ( secs > 300 ) {
if ( KMessageBox::Cancel == KMessageBox::warningContinueCancel(0, i18n("The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!"), i18n("High clock skew!"),i18n("Synchronize!"))) {
qDebug("KSS::Sync cancelled ,cs");
+ mErrorMessage = 0;
+ end_connect();
+ error_connect("ERROR_CA\r\n\r\n");
return ;
}
}
QFont f = label->font();
f.setPointSize ( f.pointSize() *2 );
f. setBold (true );
QLabel* label = new QLabel( warning, mSyncActionDialog );
label->setFont( f );
warning = i18n("ADJUST\nYOUR\nCLOCKS!");
label->setText( warning );
label->setAlignment ( Qt::AlignHCenter );
lay->addWidget( label);
mSyncActionDialog->setFixedSize( 230, 300);
} else {
mSyncActionDialog->setFixedSize( 230, 200);
}
} else {
mSyncActionDialog->setFixedSize( 230, 120);
}
} else
mSyncActionDialog->setFixedSize( 230, 120);
mSyncActionDialog->show();
mSyncActionDialog->raise();
emit request_file();
qApp->processEvents();
QString fileName = mFileName;
QFile file( fileName );
if (!file.open( IO_ReadOnly ) ) {
- delete mSyncActionDialog;
- mSyncActionDialog = 0;
- qDebug("KSS::error open sync file: %s ", fileName.latin1());
- mSocket->close();
- if ( mSocket->state() == QSocket::Idle )
- QTimer::singleShot( 10, this , SLOT ( discardClient()));
+ mErrorMessage = 0;
+ end_connect();
+ error_connect("ERROR_FI\r\n\r\n");
return ;
-
}
mSyncActionDialog->setCaption( i18n("Sending file...") );
QTextStream ts( &file );
ts.setEncoding( QTextStream::Latin1 );
QTextStream os( mSocket );
os.setEncoding( QTextStream::Latin1 );
while ( ! ts.atEnd() ) {
os << ts.readLine() << "\r\n";
}
os << "\r\n";
//os << ts.read();
file.close();
mSyncActionDialog->setCaption( i18n("Waiting for synced file...") );
mSocket->close();
if ( mSocket->state() == QSocket::Idle )
@@ -1463,37 +1492,52 @@ void KCommandSocket::startReadFileFromSocket()
mFirst = false;
mTimerSocket->stop();
mFileString = "";
mTime.start();
mFirstLine = true;
QTimer::singleShot( 1, this , SLOT (readFileFromSocket( ) ));
}
void KCommandSocket::readFileFromSocket()
{
//qDebug("readBackFileFromSocket() %d ", mTime.elapsed ());
while ( mSocket->canReadLine () ) {
mTime.restart();
QString line = mSocket->readLine ();
if ( mFirstLine ) {
mFirstLine = false;
+ if ( line.left( 6 ) == "ERROR_" ) {
if ( line.left( 8 ) == "ERROR_PW" ) {
mRetVal = errorPW;
deleteSocket();
return ;
}
+ if ( line.left( 8 ) == "ERROR_CA" ) {
+ mRetVal = errorCA;
+ deleteSocket();
+ return ;
+ }
+ if ( line.left( 8 ) == "ERROR_FI" ) {
+ mRetVal = errorFI;
+ deleteSocket();
+ return ;
+ }
+ mRetVal = errorUN;
+ deleteSocket();
+ return ;
+ }
}
mFileString += line;
//qDebug("readline: %s ", line.latin1());
}
if ( mTime.elapsed () < 3000 ) {
// wait for more
//qDebug("waitformore ");
QTimer::singleShot( 100, this , SLOT (readFileFromSocket( ) ));
return;
}
QString fileName = mFileName;
QFile file ( fileName );
if (!file.open( IO_WriteOnly ) ) {
mFileString = "";
mRetVal = errorR;
qDebug("KSS:Error open temp sync file for writing: %s",fileName.latin1() );
diff --git a/libkdepim/ksyncmanager.h b/libkdepim/ksyncmanager.h
index 810a515..bd3ecdc 100644
--- a/libkdepim/ksyncmanager.h
+++ b/libkdepim/ksyncmanager.h
@@ -42,53 +42,56 @@ class QProgressBar;
class KServerSocket : public QServerSocket
{
Q_OBJECT
public:
KServerSocket ( QString password, Q_UINT16 port, int backlog = 0, QObject * parent=0, const char * name=0 );
void newConnection ( int socket ) ;
void setFileName( QString fn ) {mFileName = fn;};
signals:
void file_received( bool );
void request_file();
void saveFile();
void endConnect();
private slots:
void discardClient();
+ void deleteSocket();
void readClient();
+ void displayErrorMessage();
void readBackFileFromSocket();
private :
+ int mErrorMessage;
bool blockRC;
void send_file();
void get_file();
void end_connect();
- void error_connect();
+ void error_connect( QString );
QDialog* mSyncActionDialog;
QSocket* mSocket;
QString mPassWord;
QString mFileName;
QTime piTime;
QString piFileString;
};
class KCommandSocket : public QObject
{
Q_OBJECT
public:
- enum state { successR, errorR, successW, errorW, errorTO, errorPW,quiet };
+ enum state { successR, errorR, successW, errorW, errorTO, errorPW, errorCA, errorFI, errorUN,quiet };
KCommandSocket ( QString password, Q_UINT16 port, QString host, QObject * parent=0, QWidget* cap = 0, const char * name=0 );
void readFile( QString );
void writeFile( QString );
void sendStop();
private slots :
void sendFileRequest();
signals:
void commandFinished( KCommandSocket*, int );
private slots:
void startReadFileFromSocket();
void readFileFromSocket();
void deleteSocket();
void writeFileToSocket();
private :