7 files changed, 59 insertions, 12 deletions

diff --git a/bin/kdepim/korganizer/germantranslation.txt b/bin/kdepim/korganizer/germantranslation.txt
index b3a406c..1a045f3 100644
--- a/bin/kdepim/korganizer/germantranslation.txt
+++ b/bin/kdepim/korganizer/germantranslation.txt
@@ -944,388 +944,388 @@
 { "addressbook  ","Adressbuch  " },
 { "pwmanager","PWmanager" },
 { " sync"," Sync ein" },
 { "Write back synced data","Schreibe gesyncte Daten zurück" },
 { "-- Write back (on remote) existing entries only","-- Schreibe nur existierende (entfernte) Einträge zurück" },
 { "-- Write back (calendar) entries in future only","-- Schreibe nur zukünftige Kalender-Einträge zurück" },
 { "---- Max. weeks in future: ","---- Max. wochen in der Zukunft: " },
 { "Pi-Sync ( direct Kx/Pi to Kx/Pi sync )","Pi-Sync ( direktes Kx/Pi zu Kx/Pi sync )" },
 { "Mobile device (cell phone)","Mobiles Gerät (Handy)" },
 { "Help...","Hilfe..." },
 { "Local file Cal:","Lokale Datei Kal:" },
 { "Local file ABook:","Lokale Datei ABuch:" },
 { "Local file PWMgr:","Lokale Datei PWMgr:" },
 { "Addressbook file (*.vcf) is used by KA/Pi","Adressbuch Datei (*.vcf) wird von KA/Pi genutzt" },
 { "Calendar:","Kalender:" },
 { "AddressBook:","AdressBuch:" },
 { "PWManager:","PWManager:" },
 { "Addressbook file is used by KA/Pi","Adressbuch Datei wird von KA/Pi genutzt" },
 { "ssh/scp","ssh/scp" },
 { "ftp","ftp" },
 { "Password for remote access: (could be the same for each)","Passwort für entfernten Zugriff: (kann dasselbe sein für alle)" },
 { "Remote IP address: (could be the same for each)","Entfernte IP Adresse: (kann dasselbe sein für alle)" },
 { "Remote port number: (should be different for each)","Entfernte Port Nummer: (Sollte für alle unterschiedlich sein)" },
 { "command for downloading remote file to local device","Kommando zum Download der entfernten Datei zum lokalen Gerät" },
 { "command for uploading local temp file to remote device","Kommando zum Upload der lokalen temp. Datei zum entfernten Gerät" },
 { "Insert device where\nphone is connected. E.g.:\n","Füge Device ein, an dem\ndas Handy angeschlossen ist. Z.B.:\n" },
 { "KDE-Pim sync config","KDE-Pim sync Konfig" },
 { "Insert kind of connection,e.g.:\n","Füge Art der Verbindung ein,z.B.:\n" },
 { "Recommended: Leave empty!\n(Such that model can\nbe auto detected)\nOr insert name of model:\n","Empfohlen: Leer lassen!\n(So dass das Model\nautomatisch erkannt\nwerden kann)\nOder füge Model Name ein:\n" },
 { "Port number (Default: %1)","Port Nummer (Default: %1)" },
 { "Password to enable\naccess from remote:","Passwort um entfernten\nZugriff zuzulassen:" },
 { "Automatically start\nat application startup","Starte automatisch\nbeim Programmstart" },
 { "Automatically sync\nwith KDE-Desktop","Automatischer Sync\nmit dem KDE-Desktop" },
 { "Enter port for Pi-Sync","Port Nummer für Pi-Sync" },
 { "Disable Pi-Sync","Schalte Pi-Sync aus" },
 { "Do you really want\nto multiple sync\nwith all checked profiles?\nSyncing takes some\ntime - all profiles\nare synced twice!","Wollen Sie wirklich\nmit allen selektierten\nProfilen \"Multi-Syncen\"?\nDas Syncen dauert einige Zeit -\nalle Profile werden zweimal gesynct!" },
 { "KDE-Pim Sync","KDE-Pim Sync" },
 { "Multiple profiles","Multi-Sync Profile" },
 { "Device: ","Gerät: " },
 { "Multiple sync started.","Multi-Sync gestartet." },
 { "Nothing synced! No profiles defined for multisync!","Nichts gesynct! Keine Profile\nselektiert für Multi-Sync" },
 { "Turn filter on","Schalte Filter an" },
 { "Turn filter off","Schalte Filter aus" },
 { "Key bindings  KOrganizer/Pi","Tastatur Belegung KOrganizer/Pi" },
 { "<p><b>White</b>: Item readonly</p>\n","<p><b>Weiss</b>: Eintrag schreibgeschützt</p>\n" },
 { "<p><b>Dark yellow</b>:  Event/todo with attendees.</p>\n","<p><b>Dunkelgelb</b>:  Termin/Todo mit Teilnehmern.</p>\n" },
 { "<p><b>Black</b>: Event/todo with attendees. You are the organizer!</p>\n","<p><b>Schwarz</b>: Termin/Todo mit Teilnehmern. Sie sind der Organisator!</p>\n" },
 { "<p><b>Dark green</b>: Information(description) available.([i] in WN view)</p>\n","<p><b>Dunkelgrün</b>: Information(Beschreibung) verfügbar.([i] in WN Ansicht)</p>\n" },
 { "<p><b>Blue</b>: Recurrent event.([r] in Whats'Next view)</p>\n","<p><b>Blau</b>: Wiederholender Termin.([r] in Whats'Next Ansicht)</p>\n" },
 { "<p><b>Red</b>: Alarm set.([a] in Whats'Next view)</p>\n","<p><b>Rot</b>: Alarm gesetzt.([a] in Whats'Next Ansicht)</p>\n" },
 { "<p><b>Cross</b>: Item cancelled.([c] in Whats'Next view)</p>\n","<p><b>Kreuz</b>:  Eintrag gecancelt.([c] in Whats'Next Ansicht)</p>\n" },
 { "<p><b>(for square icons in agenda and month view)</b></p>\n","<p><b>(für quadratische Icons in Agenda und Monats Ansicht)</b></p>\n" },
 { "<p><h2>KO/Pi icon colors:</h2></p>\n","<p><h2>KO/Pi Icon Farben:</h2></p>\n" },
 { "<p><b>E</b>:  Edit item</p>\n","<p><b>E</b>:  Editiere Eintrag</p>\n" },
 { "<p><b>A</b>: Show agenda view.</p>\n","<p><b>A</b>: Zeige Agenda Ansicht.</p>\n" },
 { "<p><b>I,C</b>: Close dialog.</p>\n","<p><b>I,C</b>: Schließe Dialog.</p>\n" },
 { "<p><h3>In event/todo viewer:</h3></p>\n","<p><h3>In Termin/Todo Detail-Anzeige:</h3></p>\n" },
 { "<p><b>shift+up/down</b>: Goto first/last item</p>\n","<p><b>shift+up/down</b>: Gehe zum ersten/letzten Eintrag</p>\n" },
 { "<p><b>ctrl+up/down</b>:  Goto up/down by 20% of items</p>\n","<p><b>ctrl+up/down</b>:  Gehe hoch/runter 20% aller Einträge</p>\n" },
 { "<p><b>up/down</b>: Next/prev item</p>\n","<p><b>up/down</b>: Nächster/vorheriger Eintrag</p>\n" },
 { "<p><b>return+shift</b>: Deselect item+one step down</p>\n","<p><b>return+shift</b>: Deselektiere Item+Cursor einen Eintrag runter</p>\n" },
 { "<p><b>return</b>: Select item+one step down</p>\n","<p><b>return</b>: Selektiere Item+Cursor einen Eintrag runter</p>\n" },
 { "<p><b>I</b>: Show info of current item+one step down.</p>\n","<p><b>I</b>: Zeige Detail-Ansicht vom sel.Eintrag+Cursor einen Eintrag runter.</p>\n" },
 { "<p><h3>In list view:</h3></p>\n","<p><h3>In Listen Ansicht:</h3></p>\n" },
 { "<p><b>return+shift</b>:  Mark item as not completed+one step down</p>\n","<p><b>return+shift</b>:  Markiere Todo als nicht erledigt+Cursor einen Eintrag runter</p>\n" },
 { "<p><b>return</b>: Mark item as completed+one step down.</p>\n","<p><b>return</b>: Markiere Todo als erledigt+Cursor einen Eintrag runter.</p>\n" },
 { "<p><b>Q</b>: Toggle quick todo line edit.</p>\n","<p><b>Q</b>: Zeige/verstecke Quick Todo Eingabe Zeile.</p>\n" },
 { "<p><b>shift+P</b>: Make new <b>P</b>arent for todo selected with shift+S</p>\n","<p><b>shift+P</b>: Mache Todo zum neuen <b>P</b>arent Todo für das Todo, welches mit shift+Sselektiert wurde.</p>\n" },
 { "<p><b>shift+S</b>: Make <b>S</b>ubtodo (reparent todo)</p>\n","<p><b>shift+S</b>: Mache Todo zum <b>S</b>ubtodo</p>\n" },
 { "<p><b>shift+U</b>: <b>U</b>nparent todo (make root todo)</p>\n","<p><b>shift+U</b>: <b>U</b>nparent Todo (Mache Sub-Todo zum Toplevel Todo)</p>\n" },
 { "<p><h3>In todo view:</h3></p>\n","<p><h3>In Todo Anzige:</h3></p>\n" },
 { "<p><b>ctrl+up/down</b>: Scroll small todo view</p>\n","<p><b>ctrl+up/down</b>: Scrolle kleine Todo Ansicht</p>\n" },
 { "<p><b>up/down</b>: Scroll agenda view</p>\n","<p><b>up/down</b>: Scrolle Agenda Ansicht</p>\n" },
 { "<p><h3>In agenda view:</h3></p>\n","<p><h3>In Agenda Ansicht:</h3></p>\n" },
 { "<p><b>del,backspace</b>: Delete selected item</p>\n","<p><b>del,backspace</b>: Lösche selektiertes Item</p>\n" },
 { "<p><b>left</b>: Prev. week | <b>left+ctrl</b>: Prev. month</p>\n","<p><b>left</b>: Vorh. Woche | <b>left+ctrl</b>: Vorh. Monat</p>\n" },
 { "<p><b>right</b>: Next week | <b>right+ctrl</b>: Next month</p>\n","<p><b>right</b>: Nächste Woche | <b>right+ctrl</b>: Nächste Woche</p>\n" },
 { "<p><b>B</b>: Edit description (details) of selected item</p>\n","<p><b>B</b>: Editiere Beschreibung (Details) des selektierten Items</p>\n" },
 { "<p><b>C</b>: Show current time in agenda view</p>\n","<p><b>C</b>: Zeige aktuelle Zeit in Agenda Ansicht</p>\n" },
 { "<p><b>+,-</b> : Zoom in/out agenda | <b>A</b>: Toggle allday agenda height</p>\n","<p><b>+,-</b> : Zoom rein/raus Agenda | <b>A</b>: Wechsle Ganztag Agenda Höhe</p>\n" },
 { "<p><b>S+ctrl</b>: Add sub-todo | <b>X</b>: Toggle datenavigator</p>\n","<p><b>S+ctrl</b>: Füge Sub-Todo hinzu | <b>X</b>: Zeige/verstecke Datumsnavigator</p>\n" },
 { "<p><b>T</b>: Goto today | <b>T+ctrl</b>: New Todo</p>\n","<p><b>T</b>: Gehe zu Heute | <b>T+ctrl</b>: Neues Todo</p>\n" },
 { "<p><b>E</b>: Edit selected item |<b> E+ctrl</b>: New Event</p>\n","<p><b>E</b>: Editiere selektiertes Item |<b> E+ctrl</b>: Neuer Termin</p>\n" },
 { "<p><b>D</b>: One day view | <b>M</b>: Month view</p>\n","<p><b>D</b>: Ein-Tages Ansicht | <b>M</b>: Monatsansicht</p>\n" },
 { "<p><b>Z,Y</b>: Work week view | <b>U</b>: Week view</p>\n","<p><b>Z,Y</b>: Arbeitswochenansicht | <b>U</b>: Wochenansicht</p>\n" },
 { "<p><b>V</b>: Todo view | <b>L</b>: Event list view</p>\n","<p><b>V</b>: Todo Ansicht | <b>L</b>: Termin Listen Ansicht</p>\n" },
 { "<p><b>N</b>: Next days view| <b>W</b>: What's next view\n ","<p><b>N</b>: Nächste-Tage Ansicht | <b>W</b>: What's Next Ansicht\n " },
 { "<p><b>1-0</b> (+<b>ctrl</b>): Select filter 1-10 (11-20)</p>\n","<p><b>1-0</b> (+<b>ctrl</b>): Selektiere Filter 1-10 (11-20)</p>\n" },
 { "<p><b>O</b>: Filter On/Off | <b>J</b>: Journal view</p>\n","<p><b>O</b>: Filter An/Aus | <b>J</b>: Journal Ansicht</p>\n" },
 { "<p><b>F</b>: Toggle filterview |<b>F+ctrl</b>: Edit filter </p>\n","<p><b>F</b>: Zeige/verstecke Filter Ansicht |<b>F+ctrl</b>: Editiere Filter </p>\n" },
 { "<p><b>Space</b>: Toggle fullscreen | <b>P</b>: Date picker</p>\n","<p><b>Space</b>: Zeige fullscreen | <b>P</b>: Datums Picker</p>\n" },
 { "<p><b>I</b>: Show info for selected event/todo</p>\n","<p><b>I</b>: Zeige Info (Details) für selektiertes Item</p>\n" },
 { "<p><b>H</b>: This help dialog | <b>S</b>: Search dialog</p>\n","<p><b>H</b>: Dieser Hilfe Dialog | <b>S</b>: Such Dialog</p>\n" },
 { "<p><h2>KO/Pi key shortcuts:</h2></p>\n","<p><h2>KO/Pi Tastatur Kurzbefehle:</h2></p>\n" },
 { "After changing something, the data is\nautomatically saved to the file\n~/kdepim/apps/korganizer/mycalendar.ics\nafter (configurable) three minutes.\nFor safety reasons there is  one autosaving\nafter 10 minutes (of idle time) again. The \ndata is saved automatically when closing KO/Pi\nYou can create a backup file \nwith: File - Save Calendar Backup\n","Nachdem etwas geändert wurde, werden die\nDaten automatisch in die Datei abgespeichert\n~/kdepim/apps/korganizer/mycalendar.ics\nnach (konfigurierbar) drei Minuten.\nAus Sicherheitsgründen wird noch einmal\nnach 10 Min. abgespeichert, wenn keine\nÄnderungen vorgenommen wurden. Die \nDaten werden automatisch gespeichert,\nwenn KO/Pi beendet wird.\nSie können eine Backup-Datei erstellen im\nMenu: Datei - Speichere Kalender Backup\n" },
 { "Auto Saving in  KOrganizer/Pi","Auto Speichern in  KOrganizer/Pi" },
 { "\nhttp://sourceforge.net/projects/kdepimpi\n","\nhttp://sourceforge.net/projects/kdepimpi\n" },
 { "\nor report them in the bugtracker on\n","\noder trage sie in dem Bugtracker ein auf\n" },
 { "\nPlease report unexpected behaviour to\nlutz@pi-sync.info\n","\nBitte melde fehlerhaftes Verhalten an\nlutz@pi-sync.info\n" },
 { "2) Audio alarm daemon\nfor Zaurus is available!\nas an additional small application\n","2) Ein Audio Alarm Daemon\nfür den Zaurus ist verfügbar\nals zusätzliche Anwendung\n" },
 { "1) Importing *.vcs or *.ics files from\nother applications may not work properly,\nif there are events with properties\nKO/Pi does not support.\n","1) Importieren von *.vcs oder *.ics Dateien von\nanderen Anwendungen kann möglicherweise\n nicht richtig funktionieren,\nwenn die Termine Eigenschaften haben,\ndie KO/Pi nicht unterstützt.\n" },
 { "Known Problems in  KOrganizer/Pi","Bekannte Probleme in  KOrganizer/Pi" },
 { "KO/Pi FAQ","KO/Pi FAQ" },
 { "PDA-Edition\nfor: Zaurus 5x00/7x0/860/3000/6000\n","PDA-Edition\nfür: Zaurus 5x00/7x0/860/3000/6000\n" },
 { "KOrganizer/Platform-independent\n","KOrganizer/Platform-independent\n" },
 { "About KOrganizer/Pi","Über KOrganizer/Pi" },
 { "From: ","Von: " },
 { "Remove sync info","Entferne Sync Info" },
 { "For all profiles","Für alle Profile" },
 { "Hide not Running","Verstecke nicht Laufende" },
 { "ME","ME" },
 { "Toolbar","Toolbar" },
 { "Undo Delete...","Löschen rückgängig machen..." },
 { "Undo Delete","Löschen rückgängig machen" },
 { "KDE Sync HowTo...","KDE Sync HowTo..." },
 { "Multi Sync HowTo...","Multi Sync HowTo..." },
 { "Januar","Januar" },
 { "KO/Pi Keys + Colors","KO/Pi Tasten + Farben" },
 { "No Filter","Kein Filter" },
 { "Multiple Sync options","Multi Sync Optionen" },
 { "Sync algo options","Sync Ablauf Optionen" },
 { "Apply filter when adding data to local:","Filter für das Hinzufügen von Daten zu Lokal:" },
 { "Incoming calendar filter:","Eingehender Kalender Filter:" },
 { "Incoming addressbook filter:","Eingehender Adressbuch Filter:" },
 { "Write back options","Optionen zum Zurückschreiben" },
 { "Write back (on remote) existing entries only","Schreibe nur existierende (auf Entfernt) Einträge zurück" },
 { "Apply filter when adding data to remote:","Filter für das Hinzufügen von Daten zu Entfernt:" },
 { "Outgoing calendar filter:","Ausgehender Kalender Filter:" },
 { "Outgoing addressbook filter:","Ausgehender Adressbuch Filter:" },
 { "Write back (calendar) entries for time period only","Schreibe nur Kalender Einträge für Zeitspanne zurück" },
 { "Time period","Zeitspanne" },
 { "From ","Von " },
 { " weeks in the past to "," Wochen in der Vergangenheit bis zu " },
 { " weeks in the future "," Wochen in der Zukunft " },
 { "Profile kind specific settings","Profil Art abhängige Einstellungen" },
 { "Local temp file:","Lokale temp Datei:" },
 { "Multiple profiles with same name!\nPlease use unique profile names!","Mehrere Profile mit demselben Namen!\nBitte verschiedene Namen benutzen!" },
 { "Aborted! Nothing synced!","Abgebrochen! Nichts wurde gesynct!" },
 { "Language","Sprache" },
 { "Time Format","Zeit Format" },
 { "Time Zone","Zeit Zone" },
 { "%1 groups subscribed","%1 Guppen abboniert" },
 { "Your current storage dir is:\n%1\nYour mail is stored in:\n(storagedir)/apps/kopiemail/localmail","Aktuelles Speicherverzeichnis ist:\n%1\nIhre Mail wird gespeichert in:\n(speicherverz.)/apps/kopiemail/localmail" },
 { "<b>New data storage dir:</b>","<b>Neues Datenspeicherverzeichnis:</b>" },
 { "New dirs are created automatically","Neue Verzeichnisse werden aut. erstellt" },
 { "Save settings","Speichere Einstellungen" },
 { "Save standard","Speichere Standard" },
 { "<b>New settings are used\nafter a restart</b>","<b>Neue Einstellungen werden nach\neinem Neustart genutzt</b>" },
 { "Settings are stored in\n%1","Einstellungen werden gespeichert in:\n%1" },
 { "Data storage path","Daten Speicherpfad" },
 { "Language","Sprache" },
 { "Show time in agenda items","Zeige Zeit in Agenda Items" },
 { "Color for Sundays + category "Holiday"","Farbe für Sonntags + Kategorie "Feiertag"" },
 { "Show events, that are done in \nWhat's Next view","Zeige abgelaufene Termine in\nWhat's Next Ansicht" },
 { "Hide not running Todos in To-do view","Verstecke nicht laufende Todos" },
 { "+01:00 Europe/Oslo(CET)","+01:00 Europe/Oslo(CET)" },
 { "KO/Pi","KO/Pi" },
 { "There is nothing to undo!","Es gibt nichts zum\nRückgängigmachen!" },
 { "Recreating edit dialog. Please wait...","Recreating edit dialog. Please wait..." },
 { "Sound.Al.: ","Sound.Al.: " },
 { "From: %1   To: %2   %3","Von: %1   Bis: %2   %3" },
 { "Restore","Wiederherstellen" },
 { "\nAre you sure you want\nto restore this?","\nMöchten Sie das wirklicht\nwiederherstellen?" },
 { "% completed","% erledigt" },
 { "%d item(s) found.","%d Item(s) gefunden." },
 { "Set complete","Setze auf erledigt" },
 { "(cancelled)","(gecancelt)" },
 { "Click on the week number to\nshow week in agenda view","Klicke auf die Wochennummer\num die Woche in der Agenda anzuzeigen" },
 { " Local time "," Locale Zeit " },
 { "Form2","Form2" },
 { "Filter enabled","Filter angeschaltet" },
 { "Edit Filters","Ändere Filter" },
 { "Print What's Next View...","Drucke What's Next Ansicht..." },
 { "Agenda","Agenda" },
 { " ("," (" },
 { "<p><b>Due on:</b> %1</p>","<p><b>Fällig am:</b> %1</p>" },
 { "Print","Print" },
 { "&Setup Printer...","Drucker &Setup..." },
 { "View Type","Zeige Typ" },
 { "Page &orientation:","Seiten Ausrichtung:" },
 { "Use Default of Selected Style","Default des selektierten Stils" },
 { "Use Default Setting of Printer","Default Einstellung des Druckers" },
 { "Portrait","Portrait" },
 { "Landscape","Landschaft" },
 { "Print day","Drucke Tag" },
 { "CalPrintDay_Base","CalPrintDay_Base" },
 { "Date && Time Range","Datum && Zeitspanne" },
 { "&End date:","&Enddatum:" },
 { "&Start date:","&Startdatum:" },
 { "Start &time:","Startzeit:" },
 { "End ti&me:","Endzeit:" },
 { "E&xtend time range to include all events","Erweitere Zeitspanne um alle Termine einzuschliessen" },
 { "Include to&dos that are due on the printed day(s)","Inclusive To&dos, die an den selektierten Tagen fällig sind" },
 { "Alt+D","Alt+D" },
 { "&Use colors","Nutze Farben" },
 { "Alt+U","Alt+U" },
 { "Print week","Drucke Woche" },
 { "CalPrintWeek_Base","CalPrintWeek_Base" },
 { "Use &colors","Nutze Farben" },
 { "Type of View","Typ der Ansicht" },
 { "Print as &Filofax page","Drucke als &Filofax Seite" },
 { "Alt+F","Alt+F" },
 { "Print as &timetable view:","Drucke als Zeittabelle:" },
 { "Alt+T","Alt+T" },
 { "Print as split week view","Drucke als gesplittete Wochenansicht" },
 { "Print month","Drucke Monat" },
 { "CalPrintMonth_Base","CalPrintMonth_Base" },
 { "&Start month:","&Startmonat:" },
 { "&End month:","&Endmonat:" },
 { "Print week &numbers","Drucke Wochen Nummer(n)" },
 { "Print todos","Drucke Todos" },
 { "CalPrintTodoConfig_Base","CalPrintTodoConfig_Base" },
 { "Include &description of the item","Inclusive Itembeschreibung" },
 { "Include d&ue date of the item","Inclusive Fälligkeitsdatum des Items" },
 { "Include &priority of the item","Inclusive Priorität des Items" },
 { "Items to Print","Zu druckende Items" },
 { "&From:","Von:" },
 { "&To:","Bis:" },
 { "Print &all todo items","Drucke alle Todo Items" },
 { "Print only &uncompleted items","Drucke nur nicht erledigte Todos" },
 { "Only items due in the &range:","Nur Items in dem Zeitraum:" },
 { "Todo List","Todo Liste" },
 { "&Title:","&Titel:" },
 { "Co&nnect subtodos with its parent","Verbinde Unter-Todos mit ihren Ober-Todos" },
 { "Todo list","Todo Liste" },
 { "&Print...","Drucke..." },
 { "<qt>Printing on printer <b>%1</b></qt>","<qt>Drucke auf Drucker <b>%1</b></qt>" },
 { "[Unconfigured]","[Unkonfiguriert]" },
 { "OK","OK" },
 { "FilterEditor","FilterEditor" },
 { "Include","Inclusive" },
 { "Exclude","Exclusive" },
 { "Edit Selection...","Editiere Auswahl" },
 { "recurring events","wiederholende Termine" },
 { "recurr. events","wiederh.Termine" },
 { "completed to-dos","erledigte Todos" },
 { "events","Termine" },
 { "todos","Todos" },
 { "journals","Journale" },
 { "public","öffentl." },
 { "private","privat" },
 { "confidential","vertraul." },
 { "\nhas sub-todos.\nAll completed sub-todos\nwill be deleted as well!","\nhat Unter-Todos.\nAlle erledigten Unter-Todos\nwerden auch gelöscht!" },
 { "Yesterday","Gestern" },
 { "Day after tomorrow","Übermorgen" },
 { "Tomorrow","Morgen" },
 { "Day before yesterday","Vorgestern" },
 { "Size %1","Größe %1" },
 { "New Agendasize: %1","Neue Agendagröße: %1" },
 { " (%1 y.)"," (%1 J.)" },
 { "Allday:","Ganztägig:" },
 { "compl.todos","erled.Todos" },
 { "Day view","Tagesansicht" },
 { "Next days","Nächste Tage" },
 { "Next week","Nächste Woche" },
 { "Next two weeks","Nächste zwei Wochen" },
 { "Next month","Nächster Monat" },
 { "Journal view","Journal" },
 { "Display all opened","Zeige alle geöffnet" },
 { "Display all closed","Zeige alle geschlossen" },
 { "Display all flat","Zeige alle flach" },
 { "<p><i>Completed on %1</i></p>","<p><i>Erledigt am %1</i></p>" },
 { "Default todo done color:","Standard Todo erledigt Farbe" },
 { "Select week %1-%2","Wähle Woche %1-%2" },
 { "Select Week","Wähle Woche" },
 { "Set alarm for selected...","Setze Alarm für Selekt..." },
 { "Set Alarm!","Setze Alarm!" },
 { "Canged alarm for %1 items","Alarm für %1 Items geändert" },
 { " and "," und " },
 { "<IMG src="%1"> only )","nur <IMG src="%1"> )" },
 { "Mail to selected","Mail an Ausgewählte" },
 { "Mail to all","Mail an Alle" },
 { "Week view mode uses bigger font","Wochenansicht Modus nutzt größeren Font" },
 { "Set reminder ON with offset to:","Alarm AN mit Offset auf:" },
 { " on"," am" },
 { " completed on "," erledigt am " },
 { "Save as Event template","Speichere als Vorlage" },
 { "Load Event template","Lade Termin Vorlage" },
 { "Save as Journal template","Speichere als Journal Vorlage" },
 { "Insert Journal template","Füge Journal Vorlage ein" },
 { "Sub todos:<br>","Unter Todos:<br>" },
 { "Parent todo:<br>","Über Todo:<br>" },
 { "Set current as color category","Setze Gewählte als Farbkategorie" },
 { " completed"," erledigt" },
 { "(c)2004 Lutz Rogowski (rogowski@kde.org)\nKO/Pi is based on KOrganizer\n(c)2002,2003 Cornelius Schumacher\n(schumacher@kde.org) and the KDE team.\nKOrganizer/Pi is licensed under the GPL.\nKO/Pi can be compiled for\nLinux, Zaurus-PDA and Windows\nwww.pi-sync.info --- www.korganizer.org\nSpecial thanks to Michael and Ben\nfor intensive testing!","(c)2004 Lutz Rogowski (rogowski@kde.org)\nKO/Pi basiert auf KOrganizer\n(c)2002,2003 Cornelius Schumacher\n(schumacher@kde.org) und das KDE Team.\nKOrganizer/Pi ist lizensiert unter der GPL.\nKO/Pi kann kompiliert werden für\nLinux, Zaurus-PDA und Windows\nwww.pi-sync.info --- www.korganizer.org\nBesonderen Dank an Michael und Ben\nfür intensives Testen!" },
 { "Syncing aborted. Nothing synced.","Syncing abgebrochen.Nichts wurde gesynct." },
 { "Connected! Sending request for remote file ...","Verbunden! Sende Daten Anfrage..." },
 { "Trying to connect to remote...","Versuche mit Gegenstelle zu verbinden..." },
 { "Connection to remote\nhost timed out!\nDid you forgot to enable\nsyncing on remote host?","Verbindungsversuch wegen\nZeitüberschreitung gescheitert!\nWurde vergessen Pi-Sync auf\nder Gegenstelle anzuschalten?" },
 { "ERROR: Receiving remote file failed.","FEHLER: Empfang der entfernten Daten fehlgeschlagen." },
 { "Error","Fehler" },
 { ""You entered an invalid date!\n Date changed  to current date.","Ungültiges Datum eingegeben.\nSetze heutiges Datum." },
 { "You entered an invalid date!\n Will use current date instead.","Ungültiges Datum eingegeben.\nSetze stattdessen heutiges Datum." },
 { "Warning","Warnung" },
 { "Select week number","Wähle Wochen Nummer" },
 { "Februar","Februar" },
 { "Click on the week number to\nshow week zoomed","Klicke auf die Wochennummer\num die Woche groß zu zeigen" },
 { "W","W" },
 { "Click on this to\nselect week number","Klicke hierauf um\ndie Woche auszuwählen" },
 { "T: %1","T: %1" },
 { "Start: ","Start: " },
 { "Pi-Sync options for device: ","Pi-Sync Einstellungen für Gerät: " },
 { "Password for remote access:","Passwort für fernen Zugriff:" },
 { "Remote IP address:","Ferne IP Adresse:" },
 { "Remote port number:","Ferne Port Nummer:" },
 { "Remote file saved to temp file.","Ferne Daten in temp Datei gespeichert." },
 { "Remote from: ","Fern von: " },
 { "Local from: ","Lokal von: " },
 { "Synchronization summary:\n\n %d items added to local\n %d items added to remote\n %d items updated on local\n %d items updated on remote\n %d items deleted on local\n %d items deleted on remote\n %d incoming filtered out\n %d outgoing filtered out\n","Synchronisationsübersicht:\n\n %d lokal hinzugefügt\n %d fern hinzugefügt\n %d lokal geändert\n %d fern geändert\n %d lokal gelöscht\n %d fern gelöscht\n %d eingehende ausgefiltert\n %d ausgehende ausgefiltert\n" },
 { "Local calendar changed!\n","Lokaler Kalender geändert!\n" },
 { "Write back","Schreibe zurück" },
 { "KO/Pi  Synchronization","KO/Pi  Synchronisation" },
 { "Pi-Sync succesful!","Pi-Sync erfolgreich!" },
 { "Received sync request","Sync Anfrage erhalten" },
 { "Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog.","Ferne Synchronisation ...\n\nBenutze diese Anwendung nicht!\n\nWenn das Syncen fehlschlägt kann\ndieser Dialog geschlossen werden." },
 { "Saving Data to temp file ...","Speichere Daten in temp Datei..." },
 { "Data saved to temp file!","Daten in temp Datei gespeichert!" },
 { "Sending file...","Sende Datei..." },
 { "Waiting for synced file...","Warte auf gesyncte Daten..." },
 { "Receiving synced file...","Gesyncte Daten erhalten..." },
 { "Received %1 bytes","%1 Bytes erhalten" },
 { "Writing file to disk...","Speichere Datei..." },
 { "Pi-Sync successful!","Pi-Sync erfolgreich!" },
 { "Clock skew of\nsyncing devices\nis %1 seconds!","Uhrzeitunterschied der\nsyncenden Geräte\nist %1 Sekunden!" },
 { "Synchronize!","Synchronisiere!" },
 { "High clock skew!","Großer Uhrzeitunterschied!" },
 { "ADJUST\nYOUR\nCLOCKS!","JUSTIERE\nDIE\nUHREN!" },
 { "The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!","Die Uhren der syncenden Geräte\nhaben einen Unterschied von\nmehr als 5 Minuten. Bitte die\nUhrzeiten anpassen. Sie können\nfalsche Sync-Resultate erhalten!\nBitte das Syncen bestätigen!" },
 { "This is a %1 recurring todo.","Das ist eine %1 wiederholende Aufgabe." },
 { "<p><b>Start on:</b> %1</p>","<p><b>Start am:</b> %1</p>" },
 { "List week view","Listenwochenansicht" },
 { "List week","Listenwochenansicht" },
 { "Next Week","Nächste Woche" },
 { "Previous Week","Vorherige Woche" },
 { "No items were found matching\nyour search expression.\nUse the wildcard characters\n'*' and '?' where needed.","Keine Einträge gefunden die\ndem Suchausdruck entsprechen.\nBenutze Platzhalter Zeichen\n'*' und '?' wo benötigt." },
 { "Show in todo/event viewer:","Zeige in Termin/Todo Anzeige:" },
 { "Details","Details" },
 { "Created time","Erstellt Zeit" },
 { "Last modified time","Geändert Zeit" },
 { "Show in What'sThis quick overview:","Zeige in What'sThis Schnellübersicht:" },
 { "View Options","Anzeige Optionen" },
 { "<b>Created: ","<b>Erstellt am: " },
 { "<b>Last modified: ","<b>Zuletzt geändert am: " },
 { "Journal: ","Journal: " },
 { "yearly","jährlich" },
 { "(%1) ","%1-" },
 { "<p><b>K</b>: Week view in Month view syle</p>\n","<p><b>K</b>: Wochenansicht in Art der Monatsansicht</p>\n" },
 { "Enable tooltips displaying summary of ev.","Titel-Tooltips anzeigen" },
 { "Enable scrollbars in month view cells","Scrollbar in Zellen anzeigen" },
 { "Summary/Loc.","Titel/Ort" },
 { "No items found. Use '*' and '?' where needed.","Nichts gefunden. Benutze '*' and '?' wo benötigt." },
 { "Week Number","Wochennummer" },
 { "Import","Importiere" },
 { "Export","Exportiere" },
 { "Beam","Beame" },
 { "Export selected","Exportiere Selektierte" },
 { "As iCal (ics) file...","Als iCal (ics) Datei..." },
 { "As vCal (vcs) file...","Als vCal (vcs) Datei..." },
 { "Journal/Details...","Journale/Details..." },
 { "Agenda View","Agenda Ansicht" },
 { "Show current time","Zeige aktuelle Zeit" },
 { "Edit new item","Bearbeite neuen Eintrag" },
 { "Please select at least one\nof the types to search for:\n\nEvents\nTodos\nJournals","Bitte wählen Sie mindestens\neinen dieser Typen\num darin zu suchen:\n\nTermine\nTodos\nJournale" },
 { "There is no next alarm.","Es gibt keinen nächsten Alarm." },
 { "%1 %2 - %3 (next event/todo with alarm)","%1 %2 - %3 (nächster Termin/Todo mit Alarm)" },
 { "The next alarm is in:\n","Der nächste Alarm ist in:\n" },
 { "%1 days\n","%1 Tagen\n" },
 { "1 day\n","1 Tag\n" },
 { "%1 hours\n","%1 Stunden\n" },
 { "1 hour\n","1 Stunde\n" },
 { "%1 minutes\n","%1 Minuten\n" },
 { "1 minute\n","1 Minute\n" },
 { "Only one toolbar","Nur eine Toolbar" },
 { "Print","Drucke" },
 { "Print selected event / todo...","Drucke ausgewählten Termin / Todo..." },
 { "There is nothing selected!","Es ist nichts ausgewählt!" },
 { "\n\nDo you really want to print this item?","\n\nMöchten Sie wirklich diesen Eintrag ausdrucken? " },
 { "KO/Pi Print Confirmation","KO/Pi Druckbestätigung" },
 { "This prints the view as you see it.\n(With the complete content, of course.)\nYou may change the print layout by resizing the view.\nPrint unscaled may print several pages\ndepending on the amount of data.\nPrint scaled down will print all on one page.\nPrint scaled up/down will print all on one page,\nbut will scale up the text to page boundaries,\nif the text is smaller than the page.\nYou can select page geometry setup in the next dialog.\n","Dies druckt die Ansicht wie man sie sieht.\n(Mit dem kompletten Inhalt natürlich.)\nMan kann das Layout ändern durch ändern der Fenstergröße.\nDrucke unskaliert druckt ggf. mehrere Seiten\nabhängig von der Menge der Daten.\nDrucke runterskaliert um auf eine Seite zu passen\ndruckt alles auf eine Seite.\nDrucke hoch/runterskaliert um genau auf eine Seite zu passen\nvergrößert den Text gegebenenfalls.\nDas Seitenlayout kann im nächsten Dialog gewählt werden.\n" },
 { "KO/Pi Printout","KO/Pi Ausdruck" },
 { "Print unscaled","Drucke unskaliert" },
 { "Print scaled down to fit one page","Drucke runterskaliert um auf eine Seite zu passen." },
 { "Print scaled up/down to fit one page","Drucke hoch/runterskaliert um genau auf eine Seite zu passen." },
 { "Printout Mode","Druck Modus" },
-{ "","" },
+{ "Filter menu icon","Filtermenu Icon" },
 { "","" },
 { "","" },
 { "","" },
\ No newline at end of file
diff --git a/kabc/addresseedialog.cpp b/kabc/addresseedialog.cpp
index b3429e3..648e780 100644
--- a/kabc/addresseedialog.cpp
+++ b/kabc/addresseedialog.cpp
@@ -1,309 +1,311 @@
 /*
     This file is part of libkabc.
     Copyright (c) 2001 Cornelius Schumacher <schumacher@kde.org>
 
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Library General Public
     License as published by the Free Software Foundation; either
     version 2 of the License, or (at your option) any later version.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Library General Public License for more details.
 
     You should have received a copy of the GNU Library General Public License
     along with this library; see the file COPYING.LIB.  If not, write to
     the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
     Boston, MA 02111-1307, USA.
 */
 
 #include <qlayout.h>
 #include <qpushbutton.h>
 #include <qgroupbox.h>
 #include <qapplication.h>
 #include <qregexp.h>
 #include <qvbox.h>
 #include <qlabel.h>
 
 #include <klocale.h>
 #include <kdebug.h>
 #include <kglobalsettings.h>
 
 #include "stdaddressbook.h"
 
 #include "addresseedialog.h"
 #include "KDGanttMinimizeSplitter.h"
 //#include "addresseedialog.moc"
 
 using namespace KABC;
 
 AddresseeItem::AddresseeItem( QListView *parent, const Addressee &addressee ) :
   QListViewItem( parent ),
   mAddressee( addressee )
 {
     QString name = addressee.familyName()+", "+ addressee.givenName();
     if ( name.length() == 2 )
         name = addressee.organization();
     setText( Name,name);
     setText( Email, addressee.preferredEmail() );
 }
 
 QString AddresseeItem::key( int column, bool ) const
 {
 
   if (column == Email) {
     QString value = text(Email);
     int val = value.findRev("@");
     return value.mid( val) + value.left( val );
   }
   return text(column).lower();
 }
 
 AddresseeDialog::AddresseeDialog( QWidget *parent, bool multiple ) :
   KDialogBase( KDialogBase::Plain, i18n("Select Addressee"),
                Ok|Cancel, No, parent ), mMultiple( multiple )
 {
+    qDebug("NEW AddresseeDialog ");
   QWidget *topWidget = plainPage();
 
   QBoxLayout *topLayout = new QHBoxLayout( topWidget );
 
 
   KDGanttMinimizeSplitter* mMiniSplitter = new KDGanttMinimizeSplitter( Qt::Horizontal, topWidget);
   mMiniSplitter->setMinimizeDirection ( KDGanttMinimizeSplitter::Right );
 
   topLayout->addWidget(mMiniSplitter );
 
   QWidget *listWidget = new QWidget( mMiniSplitter );
 
   QBoxLayout *listLayout = new QVBoxLayout (listWidget) ;
   //topLayout->addLayout( listLayout );
 
   mAddresseeList = new KListView( listWidget );
   mAddresseeList->addColumn( i18n("Name") );
   mAddresseeList->addColumn( i18n("Email") );
   mAddresseeList->setAllColumnsShowFocus( true );
   mAddresseeList->setFullWidth( true );
   listLayout->addWidget( mAddresseeList );
   connect( mAddresseeList, SIGNAL( doubleClicked( QListViewItem * ) ),
            SLOT( slotOk() ) );
 
   mAddresseeEdit = new QLineEdit( listWidget );
   connect( mAddresseeEdit, SIGNAL( returnPressed() ),
            SLOT( loadAddressBook() ) );
   mAddresseeEdit->setFocus();
  
   listLayout->addWidget( mAddresseeEdit );
 
   if ( mMultiple ) {
       //QBoxLayout *selectedLayout = new QVBoxLayout;
       //topLayout->addLayout( selectedLayout );
       //topLayout->setSpacing( spacingHint() );
 
     QVBox *selectedGroup = new QVBox( mMiniSplitter );
     new QLabel ( i18n("Selected:"), selectedGroup );
     //selectedLayout->addWidget( selectedGroup );
 
     mSelectedList = new KListView( selectedGroup );
     mSelectedList->addColumn( i18n("Name") );
     mSelectedList->addColumn( i18n("Email") );
     mSelectedList->setAllColumnsShowFocus( true );
     mSelectedList->setFullWidth( true );
     connect( mSelectedList, SIGNAL( doubleClicked( QListViewItem * ) ),
              SLOT( removeSelected() ) );
 
     QPushButton *unselectButton = new QPushButton( i18n("Unselect"), selectedGroup ); 
     connect ( unselectButton, SIGNAL( clicked() ), SLOT( removeSelected() ) );
 
     connect( mAddresseeList, SIGNAL( clicked( QListViewItem * ) ),
              SLOT( addSelected( QListViewItem * ) ) );
     connect( mAddresseeList, SIGNAL( returnPressed( QListViewItem * ) ),
              SLOT( selectNextItem( QListViewItem * ) ) );
 
   }
 
   mAddressBook = StdAddressBook::self( true );
   connect( mAddressBook, SIGNAL( addressBookChanged( AddressBook* ) ),
            SLOT( addressBookChanged() ) );
   connect( mAddressBook, SIGNAL( loadingFinished( Resource* ) ),
            SLOT( addressBookChanged() ) );
 
   loadAddressBook();  
   QValueList<int> splitterSize; 
   splitterSize.append( ( width() / 5 ) * 3 );
   splitterSize.append( ( width() / 5 ) *2 );
   mMiniSplitter->setSizes( splitterSize );
 }
 
 AddresseeDialog::~AddresseeDialog()
 {
+    qDebug("DELETE AddresseeDialog ");
 }
 
 void AddresseeDialog::loadAddressBook()
 {
   mAddresseeList->clear();
   mItemDict.clear();
   if ( mAddresseeEdit->text().isEmpty() ) {
       AddressBook::Iterator it;
       for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) {
       if ( (*it).uid().left(2) == "la" && (*it).uid().left(19) == QString("last-syncAddressee-") )
             continue; 
           new AddresseeItem( mAddresseeList, (*it) );
       }
       return;
   }
   //mAddresseeEdit->completionObject()->clear();
   QRegExp re;
   re.setWildcard(true); // most people understand these better.
   re.setCaseSensitive(false);
   re.setPattern( "*"+ mAddresseeEdit->text() + "*");
 
   AddressBook::Iterator it;
   for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) { 
       if ( (*it).uid().left(2) == "la" && (*it).uid().left(19) == QString("last-syncAddressee-") )
             continue; 
       QString name = (*it).familyName()+", "+ (*it).givenName();
       if ( name.length() == 2 )
           name = (*it).realName();
       name += (*it).preferredEmail();
 #if QT_VERSION >= 0x030000
       if (re.search(name) != -1)
 #else
       if (re.match(name) != -1)
 #endif
           AddresseeItem *item = new AddresseeItem( mAddresseeList, (*it) );
   }
 }
 
 void AddresseeDialog::addCompletionItem( const QString &str, QListViewItem *item )
 {
   if ( str.isEmpty() ) return;
 
   mItemDict.insert( str, item );
   //mAddresseeEdit->completionObject()->addItem( str );
 }
 
 void AddresseeDialog::selectItem( const QString &str )
 {
   if ( str.isEmpty() ) return;
 
   QListViewItem *item = mItemDict.find( str );
   if ( item ) {
     mAddresseeList->blockSignals( true );
     mAddresseeList->setSelected( item, true );
     mAddresseeList->ensureItemVisible( item );
     mAddresseeList->blockSignals( false );
   }
 }
 
 void AddresseeDialog::updateEdit( QListViewItem *item )
 {
   mAddresseeEdit->setText( item->text( 0 ) );
   mAddresseeEdit->setSelection( 0, item->text( 0 ).length() );
 }
 
 void AddresseeDialog::selectNextItem( QListViewItem *item )
 {
     addSelected( item );
     QListViewItem *next = item->nextSibling();
     if ( next ) {
         next->setSelected( true );
         item->setSelected( false );
         mAddresseeList->setCurrentItem( next );
     }
 }
 void AddresseeDialog::addSelected( QListViewItem *item )
 {
     AddresseeItem *addrItem = (AddresseeItem *)( item );
   if ( !addrItem ) return;
 
   Addressee a = addrItem->addressee();
 
   QListViewItem *selectedItem = mSelectedDict.find( a.uid() );
   if ( !selectedItem ) {
     selectedItem = new AddresseeItem( mSelectedList, a );
     mSelectedDict.insert( a.uid(), selectedItem );
   }
  
 }
 
 void AddresseeDialog::removeSelected()
 {
   QListViewItem *item = mSelectedList->selectedItem();
   AddresseeItem *addrItem = (AddresseeItem *)( item );
   if ( !addrItem ) return;
   QListViewItem *next =  item->nextSibling();
   mSelectedDict.remove( addrItem->addressee().uid() );
   delete addrItem;
   if ( next )
       next->setSelected( true );
 }
 
 Addressee AddresseeDialog::addressee()
 {
   AddresseeItem *aItem = 0;
   
   if ( mMultiple )
       aItem = (AddresseeItem *)( mSelectedList->firstChild() );
   else
       aItem = (AddresseeItem *)( mAddresseeList->selectedItem() );
  
   if (aItem) return aItem->addressee();
   return Addressee();
 }
 
 Addressee::List AddresseeDialog::addressees()
 {
   Addressee::List al;
   AddresseeItem *aItem = 0;
 
   if ( mMultiple ) {
     QListViewItem *item = mSelectedList->firstChild();
     while( item ) {
         aItem = (AddresseeItem *)( item );
       if ( aItem ) al.append( aItem->addressee() );
       item = item->nextSibling();
     }
   }
   else
   {
       aItem = (AddresseeItem *)( mAddresseeList->selectedItem() );
     if (aItem) al.append( aItem->addressee() );
   }
 
   return al;
 }
 
 Addressee AddresseeDialog::getAddressee( QWidget *parent )
 {
   AddresseeDialog *dlg = new AddresseeDialog( parent );
   Addressee addressee;
   int result = dlg->exec();
 
   if ( result == QDialog::Accepted ) {
     addressee =  dlg->addressee();
   }
 
   delete dlg;
   return addressee;
 }
 
 Addressee::List AddresseeDialog::getAddressees( QWidget *parent )
 {
   AddresseeDialog *dlg = new AddresseeDialog( parent, true );
   Addressee::List addressees;
   if ( QApplication::desktop()->width() <= 640 )
       dlg->showMaximized();
   int result = dlg->exec();
   if ( result == QDialog::Accepted ) {
     addressees =  dlg->addressees();
   }
 
   delete dlg;
   return addressees;
 }
 
 void AddresseeDialog::addressBookChanged()
 {
   loadAddressBook();
 }
diff --git a/kaddressbook/kabcore.cpp b/kaddressbook/kabcore.cpp
index 27aca2d..3f9b546 100644
--- a/kaddressbook/kabcore.cpp
+++ b/kaddressbook/kabcore.cpp
@@ -1,1247 +1,1250 @@
 /*
     This file is part of KAddressbook.
     Copyright (c) 2003 Tobias Koenig <tokoe@kde.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     Async a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 
 /*s
 Enhanced Version of the file for platform independent KDE tools.
 Copyright (c) 2004 Ulf Schenk
 
 $Id$
 */
 
 #include "kabcore.h"
 
 #include <stdaddressbook.h>
 #include <klocale.h>
 #include <kfiledialog.h>
 #include <qtimer.h>
 #include <qlabel.h>
 #include <qregexp.h>
 #include <qlineedit.h>
 #include <qcheckbox.h>
 #include <qpushbutton.h>
 #include <qprogressbar.h>
 #include <libkdepim/phoneaccess.h>
 
 #ifndef KAB_EMBEDDED
 #include <qclipboard.h>
 #include <qdir.h> 
 #include <qfile.h>
 #include <qapplicaton.h>
 #include <qprogressbar.h>
 #include <qlayout.h>
 #include <qregexp.h>
 #include <qvbox.h>
 #include <kabc/addresseelist.h>
 #include <kabc/errorhandler.h>
 #include <kabc/resource.h>
 #include <kabc/vcardconverter.h>
 #include <kapplication.h>
 #include <kactionclasses.h>
 #include <kcmultidialog.h>
 #include <kdebug.h>
 #include <kdeversion.h>
 #include <kkeydialog.h>
 #include <kmessagebox.h>
 #include <kprinter.h>
 #include <kprotocolinfo.h>
 #include <kresources/selectdialog.h>
 #include <kstandarddirs.h>
 #include <ktempfile.h>
 #include <kxmlguiclient.h>
 #include <kaboutdata.h>
 #include <libkdepim/categoryselectdialog.h>
 
 #include "addresseeutil.h"
 #include "addresseeeditordialog.h"
 #include "extensionmanager.h"
 #include "kstdaction.h"
 #include "kaddressbookservice.h"
 #include "ldapsearchdialog.h"
 #include "printing/printingwizard.h"
 #else // KAB_EMBEDDED
 
 #include <kapplication.h>
 #include "KDGanttMinimizeSplitter.h"
 #include "kaddressbookmain.h"
 #include "kactioncollection.h"
 #include "addresseedialog.h"
 //US
 #include <addresseeview.h>
 
 #include <qapp.h>
 #include <qmenubar.h>
 //#include <qtoolbar.h>
 #include <qmessagebox.h>
 #include <kdebug.h>
 #include <kiconloader.h> // needed for SmallIcon
 #include <kresources/kcmkresources.h>
 #include <ktoolbar.h>
 
 
 //#include <qlabel.h>
 
 
 #ifndef DESKTOP_VERSION
 #include <qpe/ir.h>
 #include <qpe/qpemenubar.h>
 #include <qtopia/qcopenvelope_qws.h>
 #else
 
 #include <qmenubar.h>
 #endif
 
 #endif // KAB_EMBEDDED
 #include "kcmconfigs/kcmkabconfig.h"
 #include "kcmconfigs/kcmkdepimconfig.h"
 #include "kpimglobalprefs.h"
 #include "externalapphandler.h"
 #include "xxportselectdialog.h"
 
 
 #include <kresources/selectdialog.h>
 #include <kmessagebox.h>
 
 #include <picture.h>
 #include <resource.h>
 
 //US#include <qsplitter.h>
 #include <qmap.h>
 #include <qdir.h>
 #include <qfile.h>
 #include <qvbox.h>
 #include <qlayout.h>
 #include <qclipboard.h>
 #include <qtextstream.h>
 #include <qradiobutton.h>
 #include <qbuttongroup.h>
 
 #include <libkdepim/categoryselectdialog.h>
 #include <libkdepim/categoryeditdialog.h>
 #include <kabc/vcardconverter.h>
 
 
 #include "addresseeutil.h"
 #include "undocmds.h"
 #include "addresseeeditordialog.h"
 #include "viewmanager.h"
 #include "details/detailsviewcontainer.h"
 #include "kabprefs.h"
 #include "xxportmanager.h"
 #include "incsearchwidget.h"
 #include "jumpbuttonbar.h"
 #include "extensionmanager.h"
 #include "addresseeconfig.h"
 #include "nameeditdialog.h"
 #include <kcmultidialog.h>
 
 #ifdef _WIN32_
 #ifdef  _OL_IMPORT_
 #include "kaimportoldialog.h"
 #endif
 #else
 #include <unistd.h>
 #endif
 // sync includes
 #include <libkdepim/ksyncprofile.h>
 #include <libkdepim/ksyncprefsdialog.h>
 
 
 class KABCatPrefs : public QDialog
 {
   public:
     KABCatPrefs( QWidget *parent=0, const char *name=0 ) :
       QDialog( parent, name, true ) 
     {
         setCaption( i18n("Manage new Categories") );
         QVBoxLayout* lay = new QVBoxLayout( this );
         lay->setSpacing( 3 );
         lay->setMargin( 3 );
         QLabel * lab = new QLabel( i18n("After importing/loading/syncing\nthere may be new categories in\naddressees\nwhich are not in the category list.\nPlease choose what to do:\n "), this );
         lay->addWidget( lab ); 
         QButtonGroup* format = new  QButtonGroup( 1, Horizontal, i18n("New categories not in list:"), this );
         lay->addWidget( format ); 
         format->setExclusive ( true ) ;
         addCatBut = new QRadioButton(i18n("Add to category list"), format );
         new QRadioButton(i18n("Remove from addressees"), format );
         addCatBut->setChecked( true );
         QPushButton * ok = new QPushButton( i18n("OK"), this );
         lay->addWidget( ok );
         QPushButton * cancel = new QPushButton( i18n("Cancel"), this );
         lay->addWidget( cancel );
         connect ( ok,SIGNAL(clicked() ),this , SLOT ( accept() )  );
         connect (cancel, SIGNAL(clicked() ), this, SLOT ( reject())  );
         resize( 200, 200 );
     }
       
     bool addCat() { return addCatBut->isChecked(); }
 private:
     QRadioButton* addCatBut;
 };
 
 class KABFormatPrefs : public QDialog
 {
   public:
     KABFormatPrefs( QWidget *parent=0, const char *name=0 ) :
       QDialog( parent, name, true ) 
     {
         setCaption( i18n("Set formatted name") );
         QVBoxLayout* lay = new QVBoxLayout( this );
         lay->setSpacing( 3 );
         lay->setMargin( 3 );
         QLabel * lab = new QLabel( i18n("You can set the formatted name\nfor a list of contacts in one go."), this );
         lay->addWidget( lab ); 
         QButtonGroup* format = new QButtonGroup( 1, Horizontal, i18n("Set formatted name to:"), this );
         lay->addWidget( format ); 
         format->setExclusive ( true ) ;
         simple = new QRadioButton(i18n("Simple: James Bond"), format );
         full = new QRadioButton(i18n("Full: Mr. James 007 Bond I"), format );
         reverse = new QRadioButton(i18n("Reverse: Bond, James"), format );
         company = new QRadioButton(i18n("Organization: MI6"), format );
         simple->setChecked( true );
         setCompany = new QCheckBox(i18n("Set formatted name to\norganization, if name empty"), this);
         lay->addWidget( setCompany );
         QPushButton * ok = new QPushButton( i18n("Select contact list"), this );
         lay->addWidget( ok );
         QPushButton * cancel = new QPushButton( i18n("Cancel"), this );
         lay->addWidget( cancel );
         connect ( ok,SIGNAL(clicked() ),this , SLOT ( accept() )  );
         connect (cancel, SIGNAL(clicked() ), this, SLOT ( reject())  );
         //resize( 200, 200 );
        
     }
 public:
     QRadioButton* simple, *full, *reverse, *company;
     QCheckBox* setCompany;
 };
 
 
 
 class KAex2phonePrefs : public QDialog
 {
   public:
     KAex2phonePrefs( QWidget *parent=0, const char *name=0 ) :
       QDialog( parent, name, true ) 
     {
         setCaption( i18n("Export to phone options") );
         QVBoxLayout* lay = new QVBoxLayout( this );
         lay->setSpacing( 3 );
         lay->setMargin( 3 );
         QLabel *lab;
         lay->addWidget(lab = new QLabel( i18n("Please read Help-Sync Howto\nto know what settings to use."), this ) );  
         lab->setAlignment (AlignHCenter  ); 
         QHBox* temphb;
         temphb = new QHBox( this );
         new QLabel( i18n("I/O device: "), temphb ); 
         mPhoneDevice = new QLineEdit( temphb);
         lay->addWidget( temphb );
         temphb = new QHBox( this );
         new QLabel( i18n("Connection: "), temphb ); 
         mPhoneConnection = new QLineEdit( temphb);
         lay->addWidget( temphb );
         temphb = new QHBox( this );
         new QLabel( i18n("Model(opt.): "), temphb ); 
         mPhoneModel = new QLineEdit( temphb);
         lay->addWidget( temphb );
         // mWriteToSim = new QCheckBox( i18n("Write Contacts to SIM card\n(if not, write to phone memory)"), this );
         // lay->addWidget( mWriteToSim );
         lay->addWidget(lab = new QLabel( i18n("NOTE: This will remove all old\ncontact data on phone!"), this ) );  
         lab->setAlignment (AlignHCenter); 
         QPushButton * ok = new QPushButton( i18n("Export to mobile phone!"), this );
         lay->addWidget( ok );
         QPushButton * cancel = new QPushButton( i18n("Cancel"), this );
         lay->addWidget( cancel );
         connect ( ok,SIGNAL(clicked() ),this , SLOT ( accept() )  );
         connect (cancel, SIGNAL(clicked() ), this, SLOT ( reject())  );
         resize( 220, 240 );
         
     }
    
 public:
     QLineEdit* mPhoneConnection, *mPhoneDevice, *mPhoneModel; 
     QCheckBox* mWriteToSim;
 };
 
 
 bool pasteWithNewUid = true;
 
 #ifdef KAB_EMBEDDED
 KABCore::KABCore( KAddressBookMain *client, bool readWrite, QWidget *parent, const char *name )
   : QWidget( parent, name ), KSyncInterface(), mGUIClient( client ), mViewManager( 0 ),
     mExtensionManager( 0 ),mConfigureDialog( 0 ),/*US  mLdapSearchDialog( 0 ),*/
     mReadWrite( readWrite ), mModified( false ), mMainWindow(client)
 #else //KAB_EMBEDDED
 KABCore::KABCore( KXMLGUIClient *client, bool readWrite, QWidget *parent, const char *name )
   : QWidget( parent, name ), KSyncInterface(), mGUIClient( client ), mViewManager( 0 ),
     mExtensionManager( 0 ), mConfigureDialog( 0 ), mLdapSearchDialog( 0 ),
     mReadWrite( readWrite ), mModified( false )
 #endif //KAB_EMBEDDED
 {
   //  syncManager = new KSyncManager((QWidget*)this, (KSyncInterface*)this, KSyncManager::KAPI, KABPrefs::instance(), syncMenu);
   //  syncManager->setBlockSave(false);
   mIncSearchWidget = 0;
     mMiniSplitter = 0;
   mExtensionBarSplitter = 0;
   mIsPart = !parent->inherits( "KAddressBookMain" );
   mAddressBook = KABC::StdAddressBook::self();
   KABC::StdAddressBook::setAutomaticSave( false );
 
 #ifndef KAB_EMBEDDED
   mAddressBook->setErrorHandler( new KABC::GUIErrorHandler );
 #endif //KAB_EMBEDDED
 
   connect( mAddressBook, SIGNAL( addressBookChanged( AddressBook * ) ),
            SLOT( addressBookChanged() ) );
 
 #if 0
   // LP moved to addressbook init method
   mAddressBook->addCustomField( i18n( "Department" ), KABC::Field::Organization,
                                 "X-Department", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Profession" ), KABC::Field::Organization,
                                 "X-Profession", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Assistant's Name" ), KABC::Field::Organization,
                                 "X-AssistantsName", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Manager's Name" ), KABC::Field::Organization,
                                 "X-ManagersName", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Spouse's Name" ), KABC::Field::Personal,
                                 "X-SpousesName", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Office" ), KABC::Field::Personal,
                                 "X-Office", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "IM Address" ), KABC::Field::Personal,
                                 "X-IMAddress", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Anniversary" ), KABC::Field::Personal,
                                 "X-Anniversary", "KADDRESSBOOK" );
 
   //US added this field to become compatible with Opie/qtopia addressbook
   // values can be "female" or "male" or "". An empty field represents undefined.
   mAddressBook->addCustomField( i18n( "Gender" ), KABC::Field::Personal,
                                 "X-Gender", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Children" ), KABC::Field::Personal,
                                 "X-Children", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "FreeBusyUrl" ), KABC::Field::Personal,
                                 "X-FreeBusyUrl", "KADDRESSBOOK" );
 #endif
   initGUI();
 
   mIncSearchWidget->setFocus();
 
 
   connect( mViewManager, SIGNAL( selected( const QString& ) ),
            SLOT( setContactSelected( const QString& ) ) );
   connect( mViewManager, SIGNAL( executed( const QString& ) ),
            SLOT( executeContact( const QString& ) ) );
 
   connect( mViewManager, SIGNAL( deleteRequest( ) ),
            SLOT( deleteContacts( ) ) );
   connect( mViewManager, SIGNAL( modified() ),
            SLOT( setModified() ) );
 
   connect( mExtensionManager, SIGNAL( modified( const KABC::Addressee::List& ) ), this, SLOT( extensionModified( const KABC::Addressee::List& ) ) );
   connect( mExtensionManager, SIGNAL( changedActiveExtension( int ) ), this, SLOT( extensionChanged( int ) ) );
 
   connect( mXXPortManager, SIGNAL( modified() ),
            SLOT( setModified() ) );
 
   connect( mJumpButtonBar, SIGNAL( jumpToLetter( const QString& ) ),
            SLOT( incrementalSearch( const QString& ) ) );
   connect( mIncSearchWidget, SIGNAL( fieldChanged() ),
            mJumpButtonBar, SLOT( recreateButtons() ) );
 
   connect( mDetails, SIGNAL( sendEmail( const QString& ) ),
            SLOT( sendMail( const QString& ) ) );
 
 
   connect( ExternalAppHandler::instance(), SIGNAL (requestForNameEmailUidList(const QString&, const QString&)),this, SLOT(requestForNameEmailUidList(const QString&, const QString&)));
   connect( ExternalAppHandler::instance(), SIGNAL (requestForDetails(const QString&, const QString&, const QString&, const QString&, const QString&)),this, SLOT(requestForDetails(const QString&, const QString&, const QString&, const QString&, const QString&)));
   connect( ExternalAppHandler::instance(), SIGNAL (requestForBirthdayList(const QString&, const QString&)),this, SLOT(requestForBirthdayList(const QString&, const QString&)));
   connect( ExternalAppHandler::instance(), SIGNAL (nextView()),this, SLOT(setDetailsToggle()));
+  connect( ExternalAppHandler::instance(), SIGNAL (callContactdialog()),this, SLOT(callContactdialog()));
 
 
 #ifndef KAB_EMBEDDED
   connect( mViewManager, SIGNAL( urlDropped( const KURL& ) ),
            mXXPortManager, SLOT( importVCard( const KURL& ) ) );
 
   connect( mDetails, SIGNAL( browse( const QString& ) ),
            SLOT( browse( const QString& ) ) );
 
 
   mAddressBookService = new KAddressBookService( this );
 
 #endif //KAB_EMBEDDED
 
   mMessageTimer = new QTimer( this ); 
   connect( mMessageTimer, SIGNAL( timeout() ), this, SLOT( setCaptionBack() ) );
   mEditorDialog = 0;
   createAddresseeEditorDialog( this );
   setModified( false );  
   mBRdisabled = false;
 #ifndef DESKTOP_VERSION
   infrared  = 0;
 #endif
   //toggleBeamReceive( );
   //mMainWindow->toolBar()->show();
   // we have a toolbar repainting error on the Zaurus when starting KA/Pi
     QTimer::singleShot( 10, this , SLOT ( updateToolBar())); 
 }
 
 void KABCore::updateToolBar()
 {
     static int iii = 0;
     ++iii;
     mMainWindow->toolBar()->repaintMe();
     if ( iii < 4 )
         QTimer::singleShot( 100*iii, this , SLOT ( updateToolBar())); 
 }
 KABCore::~KABCore()
 {
     //  save();
     //saveSettings();
     //KABPrefs::instance()->writeConfig();
     delete AddresseeConfig::instance();
     mAddressBook = 0;
     KABC::StdAddressBook::close();
     
     delete syncManager;
 #ifndef DESKTOP_VERSION
     if ( infrared )
         delete infrared;
 #endif
 }
 void KABCore::receive( const QCString& cmsg, const QByteArray& data )
 {
     //qDebug("KA: QCOP message received: %s ", cmsg.data()  );
     if ( cmsg == "setDocument(QString)" ) {
         QDataStream stream( data, IO_ReadOnly );
         QString fileName;
         stream >> fileName;
         recieve( fileName );
         return;
     }
 }
 void KABCore::toggleBeamReceive( )
 {
     if ( mBRdisabled  )
         return;
 #ifndef DESKTOP_VERSION
     if ( infrared ) {
         qDebug("KA: AB disable BeamReceive ");
         delete infrared;
         infrared = 0;
         mActionBR->setChecked(false);
         return;
     } 
     qDebug("KA: AB enable BeamReceive ");
     mActionBR->setChecked(true);
 
     infrared = new QCopChannel("QPE/Application/addressbook",this, "channelAB" ) ;   
     QObject::connect( infrared, SIGNAL (received ( const QCString &, const QByteArray & )),this, SLOT(receive(  const QCString&, const QByteArray& )));
 #endif
 }
 
 
 void KABCore::disableBR(bool b)
 {
 #ifndef DESKTOP_VERSION
     if ( b ) {
         if ( infrared ) {
             toggleBeamReceive( );
         }
         mBRdisabled = true;
     } else {
         if ( mBRdisabled ) {
             mBRdisabled = false;
             //toggleBeamReceive( );
         }
     }
 #endif
 
 }
 void KABCore::recieve( QString fn  )
 {
     //qDebug("KABCore::recieve ");
     int count = mAddressBook->importFromFile( fn, true );
     if ( count )
         setModified( true );
     mViewManager->refreshView();
     message(i18n("%1 contact(s) received!").arg( count ));
     topLevelWidget()->showMaximized();
     topLevelWidget()->raise();
 }
 void KABCore::restoreSettings()
 {
   mMultipleViewsAtOnce = KABPrefs::instance()->mMultipleViewsAtOnce;
 
   bool state;
 
   if (mMultipleViewsAtOnce)
     state = KABPrefs::instance()->mDetailsPageVisible;
   else
     state = false;
 
   mActionDetails->setChecked( state );
   setDetailsVisible( state );
 
   state = KABPrefs::instance()->mJumpButtonBarVisible;
 
   mActionJumpBar->setChecked( state );
   setJumpButtonBarVisible( state );
 /*US
  QValueList<int> splitterSize = KABPrefs::instance()->mDetailsSplitter;
   if ( splitterSize.count() == 0 ) {
     splitterSize.append( width() / 2 );
     splitterSize.append( width() / 2 );
   }
   mMiniSplitter->setSizes( splitterSize );
   if (  mExtensionBarSplitter ) {
   splitterSize = KABPrefs::instance()->mExtensionsSplitter;
   if ( splitterSize.count() == 0 ) {
     splitterSize.append( width() / 2 );
     splitterSize.append( width() / 2 );
   }
   mExtensionBarSplitter->setSizes( splitterSize );
 
   }
 */
   mViewManager->restoreSettings();
   mIncSearchWidget->setCurrentItem( KABPrefs::instance()->mCurrentIncSearchField );
   mExtensionManager->restoreSettings();
 #ifdef DESKTOP_VERSION
   int wid = width();
   if ( wid < 10 )
       wid = 400;
 #else
   int wid = QApplication::desktop()->width();
   if ( wid < 640 )
       wid = QApplication::desktop()->height();
 #endif
   QValueList<int> splitterSize;// = KABPrefs::instance()->mDetailsSplitter;
   if ( true /*splitterSize.count() == 0*/ ) {
       splitterSize.append( wid / 2 );
       splitterSize.append( wid / 2 );
   }
   mMiniSplitter->setSizes( splitterSize );
   if (  mExtensionBarSplitter ) {
       //splitterSize = KABPrefs::instance()->mExtensionsSplitter;
       if ( true /*splitterSize.count() == 0*/ ) {
           splitterSize.append( wid / 2 );
           splitterSize.append( wid / 2 );
       }
       mExtensionBarSplitter->setSizes( splitterSize );
 
   }
 
 
 }
 
 void KABCore::saveSettings()
 {
   KABPrefs::instance()->mJumpButtonBarVisible = mActionJumpBar->isChecked();
   if ( mExtensionBarSplitter )
     KABPrefs::instance()->mExtensionsSplitter = mExtensionBarSplitter->sizes();
   KABPrefs::instance()->mDetailsPageVisible = mActionDetails->isChecked();
   KABPrefs::instance()->mDetailsSplitter = mMiniSplitter->sizes();
 #ifndef KAB_EMBEDDED
 
   KABPrefs::instance()->mExtensionsSplitter = mExtensionBarSplitter->sizes();
   KABPrefs::instance()->mDetailsSplitter = mDetailsSplitter->sizes();
 #endif //KAB_EMBEDDED
   mExtensionManager->saveSettings();
   mViewManager->saveSettings();
 
   KABPrefs::instance()->mCurrentIncSearchField = mIncSearchWidget->currentItem();
   KABPrefs::instance()->writeConfig();
   qDebug("KA: KABCore::saveSettings() ");
 }
 
 KABC::AddressBook *KABCore::addressBook() const
 {
   return mAddressBook;
 }
 
 KConfig *KABCore::config()
 {
 #ifndef KAB_EMBEDDED
   return KABPrefs::instance()->config();
 #else //KAB_EMBEDDED
   return KABPrefs::instance()->getConfig();
 #endif //KAB_EMBEDDED
 }
 
 KActionCollection *KABCore::actionCollection() const
 {
   return mGUIClient->actionCollection();
 }
 
 KABC::Field *KABCore::currentSearchField() const
 {
    if (mIncSearchWidget)
     return mIncSearchWidget->currentField();
   else
     return 0;
 }
 
 QStringList KABCore::selectedUIDs() const
 {
   return mViewManager->selectedUids();
 }
 
 KABC::Resource *KABCore::requestResource( QWidget *parent )
 {
   QPtrList<KABC::Resource> kabcResources = addressBook()->resources();
 
   QPtrList<KRES::Resource> kresResources;
   QPtrListIterator<KABC::Resource> resIt( kabcResources );
   KABC::Resource *resource;
   while ( ( resource = resIt.current() ) != 0 ) {
     ++resIt;
     if ( !resource->readOnly() ) {
       KRES::Resource *res = static_cast<KRES::Resource*>( resource );
       if ( res )
         kresResources.append( res );
     }
   }
 
   KRES::Resource *res = KRES::SelectDialog::getResource( kresResources, parent );
   return static_cast<KABC::Resource*>( res );
 }
 
 #ifndef KAB_EMBEDDED
 KAboutData *KABCore::createAboutData()
 #else //KAB_EMBEDDED
 void KABCore::createAboutData()
 #endif //KAB_EMBEDDED
 {
 #ifndef KAB_EMBEDDED
   KAboutData *about = new KAboutData( "kaddressbook", I18N_NOOP( "KAddressBook" ),
                                       "3.1", I18N_NOOP( "The KDE Address Book" ),
                                       KAboutData::License_GPL_V2,
                                       I18N_NOOP( "(c) 1997-2003, The KDE PIM Team" ) );
   about->addAuthor( "Tobias Koenig", I18N_NOOP( "Current maintainer " ), "tokoe@kde.org" );
   about->addAuthor( "Don Sanders", I18N_NOOP( "Original author " ) );
   about->addAuthor( "Cornelius Schumacher",
                     I18N_NOOP( "Co-maintainer, libkabc port, CSV import/export " ),
                     "schumacher@kde.org" );
   about->addAuthor( "Mike Pilone", I18N_NOOP( "GUI and framework redesign " ),
                     "mpilone@slac.com" );
   about->addAuthor( "Greg Stern", I18N_NOOP( "DCOP interface" ) );
   about->addAuthor( "Mark Westcott", I18N_NOOP( "Contact pinning" ) );
   about->addAuthor( "Michel Boyer de la Giroday", I18N_NOOP( "LDAP Lookup\n" ),
                     "michel@klaralvdalens-datakonsult.se" );
   about->addAuthor( "Steffen Hansen", I18N_NOOP( "LDAP Lookup " ),
                     "hansen@kde.org" );
 
   return about;
 #endif //KAB_EMBEDDED
 
   QString version;
 #include <../version>
     QMessageBox::about( this, "About KAddressbook/Pi",
                         "KAddressbook/Platform-independent\n"
                         "(KA/Pi) " +version + " - " +
 #ifdef DESKTOP_VERSION
                         "Desktop Edition\n"
 #else
                         "PDA-Edition\n"
                         "for: Zaurus 5500 / 7x0 / 8x0\n"
 #endif
 
                         "(c) 2004 Ulf Schenk\n"
                         "(c) 2004 Lutz Rogowski\n"
                         "(c) 1997-2003, The KDE PIM Team\n"
   "Tobias Koenig Current maintainer\ntokoe@kde.org\n"
   "Don Sanders Original author\n"
   "Cornelius Schumacher Co-maintainer\nschumacher@kde.org\n"
   "Mike Pilone GUI and framework redesign\nmpilone@slac.com\n"
   "Greg Stern DCOP interface\n"
   "Mark Westcot Contact pinning\n"
   "Michel Boyer de la Giroday LDAP Lookup\n" "michel@klaralvdalens-datakonsult.se\n"
   "Steffen Hansen LDAP Lookup\nhansen@kde.org\n"
 #ifdef _WIN32_
  "(c) 2004 Lutz Rogowski Import from OL\nrogowski@kde.org\n"
 #endif
  );
 }
 
 void KABCore::setContactSelected( const QString &uid )
 {
   KABC::Addressee addr = mAddressBook->findByUid( uid );
   if ( !mDetails->isHidden() )
     mDetails->setAddressee( addr );
 
   if ( !addr.isEmpty() ) {
     emit contactSelected( addr.formattedName() );
     KABC::Picture pic = addr.photo();
     if ( pic.isIntern() ) {
 //US      emit contactSelected( pic.data() );
 //US instead use:
       QPixmap px;
       if (pic.data().isNull() != true)
       {
         px.convertFromImage(pic.data());
       }
 
       emit contactSelected( px );
     }
   }
 
 
   mExtensionManager->setSelectionChanged();
 
   // update the actions
   bool selected = !uid.isEmpty();
 
   if ( mReadWrite ) {
     mActionCut->setEnabled( selected );
     mActionPaste->setEnabled( selected );
   }
 
   mActionCopy->setEnabled( selected );
   mActionDelete->setEnabled( selected );
   mActionEditAddressee->setEnabled( selected );
   mActionMail->setEnabled( selected );
   mActionMailVCard->setEnabled( selected );
   //if (mActionBeam)
   //mActionBeam->setEnabled( selected );
   mActionWhoAmI->setEnabled( selected );
 }
 
 void KABCore::sendMail()
 {
   sendMail( mViewManager->selectedEmails().join( ", " ) );
 }
 
 void KABCore::sendMail( const QString& emaillist )
 {
   // the parameter has the form "name1 <abc@aol.com>,name2 <abc@aol.com>;... "
   if (emaillist.contains(",") > 0)
     ExternalAppHandler::instance()->mailToMultipleContacts( emaillist, QString::null );
   else
     ExternalAppHandler::instance()->mailToOneContact( emaillist );
 }
 
 
 
 void KABCore::mailVCard()
 {
   QStringList uids = mViewManager->selectedUids();
   if ( !uids.isEmpty() )
     mailVCard( uids );
 }
 
 void KABCore::mailVCard( const QStringList& uids )
 {
   QStringList urls;
 
 //  QString tmpdir = locateLocal("tmp", KGlobal::getAppName());
 
   QString dirName = "/tmp/" + KApplication::randomString( 8 );
 
 
 
   QDir().mkdir( dirName, true );
 
   for( QStringList::ConstIterator it = uids.begin(); it != uids.end(); ++it ) {
     KABC::Addressee a = mAddressBook->findByUid( *it );
 
     if ( a.isEmpty() )
       continue;
 
     QString name = a.givenName() + "_" + a.familyName() + ".vcf";
 
     QString fileName = dirName + "/" + name;
 
     QFile outFile(fileName);
 
     if ( outFile.open(IO_WriteOnly) ) {  // file opened successfully
       KABC::VCardConverter converter;
       QString vcard;
 
       converter.addresseeToVCard( a, vcard );
 
       QTextStream t( &outFile );  // use a text stream
       t.setEncoding( QTextStream::UnicodeUTF8 );
       t << vcard;
 
       outFile.close();
 
       urls.append( fileName );
     }
   }
 
   bool result = ExternalAppHandler::instance()->mailToMultipleContacts( QString::null, urls.join(", ") );
 
 
 /*US
   kapp->invokeMailer( QString::null, QString::null, QString::null,
                       QString::null,  // subject
                       QString::null,  // body
                       QString::null,
                       urls );  // attachments
 */
 
 }
 
 /**
   Beams the "WhoAmI contact.
 */
 void KABCore::beamMySelf()
 {
   KABC::Addressee a = KABC::StdAddressBook::self()->whoAmI();
   if (!a.isEmpty())
   {
     QStringList uids;
     uids << a.uid();
 
         beamVCard(uids);
   } else {
       KMessageBox::information( this, i18n( "Your personal contact is\nnot set! Please select it\nand set it with menu:\nSettings - Set Who Am I\n" ) );
 
 
   }
 }
 void  KABCore::updateMainWindow()
 {
     mMainWindow->showMaximized();
     mMainWindow->update();
 }
 void KABCore::resizeEvent(QResizeEvent* e )
 {
     if ( !mMiniSplitter )
         return;
     //qDebug("KABCore::resizeEvent(QResizeEvent* e ) ");
     if ( QApplication::desktop()->width() >= 480 ) {
         if (QApplication::desktop()->width() == 640 ) { // e.g. 640x480
             if ( mMiniSplitter->orientation() == Qt::Vertical ) {
                 mMiniSplitter->setOrientation(  Qt::Horizontal);
                 mMiniSplitter->setMinimizeDirection ( KDGanttMinimizeSplitter::Right );
             }
             if ( QApplication::desktop()->width() <= 640 ) {
+                mMainWindow->showMinimized();
                 //mMainWindow->setMaximumSize( QApplication::desktop()->size()  );
                 mViewManager->getFilterAction()->setComboWidth( 150 );
                 if ( mIncSearchWidget )
                     mIncSearchWidget->setSize();
                 QTimer::singleShot( 1, this , SLOT ( updateMainWindow()));
             }
             
         } else if (QApplication::desktop()->width() == 480 ){// e.g. 480x640
             if ( mMiniSplitter->orientation() == Qt::Horizontal ) {
                 mMiniSplitter->setOrientation( Qt::Vertical );
                 mMiniSplitter->setMinimizeDirection ( KDGanttMinimizeSplitter::Down );
             }
             if ( QApplication::desktop()->width() <= 640 ) {
                 //mMainWindow->setMaximumSize( QApplication::desktop()->size()  );
                 mMainWindow->showMinimized();
                 if ( KABPrefs::instance()->mHideSearchOnSwitch ) { 
                     if ( mIncSearchWidget ) {
                         mIncSearchWidget->setSize();
                     }
                 } else {
                     mViewManager->getFilterAction()->setComboWidth( 0 );
                 }
                 QTimer::singleShot( 1, this , SLOT ( updateMainWindow()));
             }
         }
     }
+    QWidget::resizeEvent( e );
 
 }
 void KABCore::export2phone()
 {
 
     QStringList uids;
     XXPortSelectDialog dlg( this, false, this );
     if ( dlg.exec() )
         uids = dlg.uids();
     else
         return;
     if ( uids.isEmpty() )
         return;
     // qDebug("count %d ", uids.count());
    
     KAex2phonePrefs ex2phone;
     ex2phone.mPhoneConnection->setText( KPimGlobalPrefs::instance()->mEx2PhoneConnection );
     ex2phone.mPhoneDevice->setText( KPimGlobalPrefs::instance()->mEx2PhoneDevice );
     ex2phone.mPhoneModel->setText( KPimGlobalPrefs::instance()->mEx2PhoneModel );
 
     if ( !ex2phone.exec() ) {
         return;
     }
     KPimGlobalPrefs::instance()->mEx2PhoneConnection  = ex2phone.mPhoneConnection->text();
     KPimGlobalPrefs::instance()->mEx2PhoneDevice = ex2phone.mPhoneDevice->text();
     KPimGlobalPrefs::instance()->mEx2PhoneModel = ex2phone.mPhoneModel->text();
 
 
     PhoneAccess::writeConfig( KPimGlobalPrefs::instance()->mEx2PhoneDevice,
                               KPimGlobalPrefs::instance()->mEx2PhoneConnection,
                               KPimGlobalPrefs::instance()->mEx2PhoneModel );
 
     QString  fileName = getPhoneFile();
     if ( ! mAddressBook->export2PhoneFormat( uids ,fileName ) )
         return;
     
     message(i18n("Exporting to phone..."));
     QTimer::singleShot( 1, this , SLOT ( writeToPhone()));
 
 }
 QString KABCore::getPhoneFile()
 {
 #ifdef DESKTOP_VERSION
     return  locateLocal("tmp", "phonefile.vcf");
 #else
     return "/tmp/phonefile.vcf";
 #endif
 
 }
 void KABCore::writeToPhone( )
 {
     if ( PhoneAccess::writeToPhone( getPhoneFile() ) )
         message(i18n("Export to phone finished!"));
     else
         qDebug(i18n("KA: Error exporting to phone"));
 }
 void KABCore::beamVCard()
 { 
     QStringList uids;
     XXPortSelectDialog dlg( this, false, this );
     if ( dlg.exec() )
         uids = dlg.uids();
     else
         return;
     if ( uids.isEmpty() )
         return;
     beamVCard( uids );
 }
 
 
 void KABCore::beamVCard(const QStringList& uids)
 {
 
     // LR: we should use the /tmp dir on the Zaurus,
     //  because: /tmp = RAM, (HOME)/kdepim = flash memory
    
 #ifdef DESKTOP_VERSION
   QString fileName = locateLocal("tmp", "kapibeamfile.vcf");
 #else
   QString fileName = "/tmp/kapibeamfile.vcf";
 #endif
 
   KABC::VCardConverter converter;
   QString description;
   QString datastream;
   for( QStringList::ConstIterator it = uids.begin(); it != uids.end(); ++it ) {
       KABC::Addressee a = mAddressBook->findByUid( *it );
 
       if ( a.isEmpty() )
           continue;
 
       if (description.isEmpty())
           description = a.formattedName();
 
       QString vcard;
       converter.addresseeToVCard( a, vcard );
       int start = 0;
       int next;
       while ( (next = vcard.find("TYPE=", start) )>= 0 ) {
           int semi = vcard.find(";", next);
           int dopp = vcard.find(":", next);
           int sep;
           if ( semi < dopp && semi >= 0 )
               sep = semi ;
           else
               sep = dopp;
           datastream +=vcard.mid( start, next - start);
           datastream +=vcard.mid( next+5,sep -next -5 ).upper();
           start = sep;
       }
       datastream += vcard.mid( start,vcard.length() );
   }
 #ifndef DESKTOP_VERSION
   QFile outFile(fileName);
   if ( outFile.open(IO_WriteOnly) ) { 
       datastream.replace ( QRegExp("VERSION:3.0") , "VERSION:2.1" );
       QTextStream t( &outFile );  // use a text stream
       //t.setEncoding( QTextStream::UnicodeUTF8 );
       t.setEncoding( QTextStream::Latin1 );
       t <<datastream.latin1();
       outFile.close();
       Ir *ir = new Ir( this );
       connect( ir, SIGNAL( done(Ir*) ), this, SLOT( beamDone(Ir*) ) );
       ir->send( fileName, description, "text/x-vCard" );
   } else {
       qDebug("KA: Error open temp  beam file ");
       return;
   }
 #endif
 
 }
 
 void KABCore::beamDone( Ir *ir )
 {
 #ifndef DESKTOP_VERSION
   delete ir;
 #endif
   topLevelWidget()->raise();
   message( i18n("Beaming finished!") );
 }
 
 
 void KABCore::browse( const QString& url )
 {
 #ifndef KAB_EMBEDDED
   kapp->invokeBrowser( url );
 #else //KAB_EMBEDDED
   qDebug("KABCore::browse must be fixed");
 #endif //KAB_EMBEDDED
 }
 
 void KABCore::selectAllContacts()
 {
   mViewManager->setSelected( QString::null, true );
 }
 
 void KABCore::deleteContacts()
 {
   QStringList uidList = mViewManager->selectedUids();
   deleteContacts( uidList );
 }
 
 void KABCore::deleteContacts( const QStringList &uids )
 {
   if ( uids.count() > 0 ) {
     PwDeleteCommand *command = new PwDeleteCommand( mAddressBook, uids );
     UndoStack::instance()->push( command );
     RedoStack::instance()->clear();
 
     // now if we deleted anything, refresh
     setContactSelected( QString::null );
     setModified( true );
   }
 }
 
 void KABCore::copyContacts()
 {
   KABC::Addressee::List addrList = mViewManager->selectedAddressees();
 
   QString clipText = AddresseeUtil::addresseesToClipboard( addrList );
 
   kdDebug(5720) << "KABCore::copyContacts: " << clipText << endl;
 
   QClipboard *cb = QApplication::clipboard();
   cb->setText( clipText );
 }
 
 void KABCore::cutContacts()
 {
   QStringList uidList = mViewManager->selectedUids();
 
 //US  if ( uidList.size() > 0 ) {
   if ( uidList.count() > 0 ) {
     PwCutCommand *command = new PwCutCommand( mAddressBook, uidList );
     UndoStack::instance()->push( command );
     RedoStack::instance()->clear();
 
     setModified( true );
   }
 }
 
 void KABCore::pasteContacts()
 {
   QClipboard *cb = QApplication::clipboard();
 
   KABC::Addressee::List list = AddresseeUtil::clipboardToAddressees( cb->text() );
 
   pasteContacts( list );
 }
 
 void KABCore::pasteContacts( KABC::Addressee::List &list  )
 {
   KABC::Resource *resource = requestResource( this );
   KABC::Addressee::List::Iterator it;
   for ( it = list.begin(); it != list.end(); ++it )
     (*it).setResource( resource );
 
   PwPasteCommand *command = new PwPasteCommand( this, list );
   UndoStack::instance()->push( command );
   RedoStack::instance()->clear();
 
   setModified( true );
 }
 
 void KABCore::setWhoAmI()
 {
   KABC::Addressee::List addrList = mViewManager->selectedAddressees();
 
   if ( addrList.count() > 1 ) {
     KMessageBox::sorry( this, i18n( "Please select only one contact." ) );
     return;
   }
 
   QString text( i18n( "<qt>Do you really want to use <b>%1</b> as your new personal contact?</qt>" ) );
   if ( KMessageBox::questionYesNo( this, text.arg( addrList[ 0 ].assembledName() ) ) == KMessageBox::Yes )
     static_cast<KABC::StdAddressBook*>( KABC::StdAddressBook::self() )->setWhoAmI( addrList[ 0 ] );
 }
 void KABCore::editCategories()
 { 
     KPIM::CategoryEditDialog dlg ( KABPrefs::instance(), this, "", true );
     dlg.exec();
 }
 void KABCore::setCategories()
 {
 
     QStringList uids;
     XXPortSelectDialog dlgx( this, false, this );
     if ( dlgx.exec() )
         uids = dlgx.uids();
     else
         return;
     if ( uids.isEmpty() )
         return;
     // qDebug("count %d ", uids.count());
 
 
   KPIM::CategorySelectDialog dlg( KABPrefs::instance(), this, "", true );
   if ( !dlg.exec() ) {
       message( i18n("Setting categories cancelled") );
       return;
   }
   bool merge = false;
   QString msg = i18n( "Merge with existing categories?" );
   if ( KMessageBox::questionYesNo( this, msg ) == KMessageBox::Yes )
     merge = true;
 
   message( i18n("Setting categories ... please wait!") );
   QStringList categories = dlg.selectedCategories();
 
   //QStringList uids = mViewManager->selectedUids();
   QStringList::Iterator it;
   for ( it = uids.begin(); it != uids.end(); ++it ) {
     KABC::Addressee addr = mAddressBook->findByUid( *it );
     if ( !addr.isEmpty() ) {
       if ( !merge )
         addr.setCategories( categories );
       else {
         QStringList addrCategories = addr.categories();
         QStringList::Iterator catIt;
         for ( catIt = categories.begin(); catIt != categories.end(); ++catIt ) {
           if ( !addrCategories.contains( *catIt ) )
             addrCategories.append( *catIt );
         }
         addr.setCategories( addrCategories );
       }
       mAddressBook->insertAddressee( addr );
     }
   }
 
   if ( uids.count() > 0 )
     setModified( true );
   message( i18n("Setting categories completed!") );
 }
 
 void KABCore::setSearchFields( const KABC::Field::List &fields )
 {
   mIncSearchWidget->setFields( fields );
 }
 
 void KABCore::incrementalSearch( const QString& text )
 {
     QString stext;
     if ( KABPrefs::instance()->mAutoSearchWithWildcard ) {
         stext = "*" + text;
     } else {
         stext = text;
     }
     mViewManager->doSearch( stext, mIncSearchWidget->currentField() );
 }
 
 void KABCore::setModified()
 {
   setModified( true );
 }
 
 void KABCore::setModifiedWOrefresh()
 {
     // qDebug("KABCore::setModifiedWOrefresh() ");
     mModified = true;
     mActionSave->setEnabled( mModified );
 
 
 }
 void KABCore::setModified( bool modified )
 {
   mModified = modified;
   mActionSave->setEnabled( mModified );
 
   if ( modified )
     mJumpButtonBar->recreateButtons();
 
   mViewManager->refreshView();
 
 }
 
 bool KABCore::modified() const
 {
   return mModified;
 }
 
 void KABCore::contactModified( const KABC::Addressee &addr  )
 {
     addrModified( addr );
 #if 0 // debug only
     KABC::Addressee ad = addr;
     ad.computeCsum( "123");
 #endif
 }
 
 void KABCore::addrModified( const KABC::Addressee &addr ,bool updateDetails )
 {
 
   Command *command = 0;
   QString uid;
 
   // check if it exists already
   KABC::Addressee origAddr = mAddressBook->findByUid( addr.uid() );
   if ( origAddr.isEmpty() )
     command = new PwNewCommand( mAddressBook, addr );
   else {
     command = new PwEditCommand( mAddressBook, origAddr, addr );
     uid = addr.uid();
   }
 
   UndoStack::instance()->push( command );
   RedoStack::instance()->clear();
   if ( updateDetails )
       mDetails->setAddressee( addr );
   setModified( true );
 }
 
 void KABCore::newContact()
 {
 
 
   QPtrList<KABC::Resource> kabcResources = mAddressBook->resources();
 
   QPtrList<KRES::Resource> kresResources;
   QPtrListIterator<KABC::Resource> it( kabcResources );
   KABC::Resource *resource;
   while ( ( resource = it.current() ) != 0 ) {
     ++it;
     if ( !resource->readOnly() ) {
       KRES::Resource *res = static_cast<KRES::Resource*>( resource );
@@ -2124,798 +2127,819 @@ void KABCore::addActionsManually()
   KToolBar* tb =  mMainWindow->toolBar();
 
 #ifndef DESKTOP_VERSION
   if ( KABPrefs::instance()->mFullMenuBarVisible ) {
 #endif
       QMenuBar* mb = mMainWindow->menuBar();
 
       //US setup menubar.
       //Disable the following block if you do not want to have a menubar.
       mb->insertItem( i18n("&File"), fileMenu );
       mb->insertItem( i18n("&Edit"), editMenu );
       mb->insertItem( i18n("&View"), viewMenu );
       mb->insertItem( i18n("&Settings"), settingsMenu );
 #ifdef DESKTOP_VERSION
       mb->insertItem( i18n("Synchronize"), syncMenu );
 #else
       mb->insertItem( i18n("Sync"), syncMenu );
 #endif
       //mb->insertItem( i18n("&Change"), changeMenu );
       mb->insertItem( i18n("&Help"), helpMenu );
       mIncSearchWidget = new IncSearchWidget( tb );
       // tb->insertWidget(-1, 0, mIncSearchWidget);
 #ifndef DESKTOP_VERSION
   } else  {
       //US setup toolbar
       QPEMenuBar   *menuBarTB = new QPEMenuBar( tb );
       QPopupMenu *popupBarTB = new QPopupMenu( this );
       menuBarTB->insertItem( SmallIcon( "z_menu" ) , popupBarTB);
       tb->insertWidget(-1, 0, menuBarTB);
       mIncSearchWidget = new IncSearchWidget( tb );
       tb->enableMoving(false);
       popupBarTB->insertItem( i18n("&File"), fileMenu );
       popupBarTB->insertItem( i18n("&Edit"), editMenu );
       popupBarTB->insertItem( i18n("&View"), viewMenu );
       popupBarTB->insertItem( i18n("&Settings"), settingsMenu );
       popupBarTB->insertItem( i18n("Synchronize"), syncMenu );
       mViewManager->getFilterAction()->plug ( popupBarTB);
       //popupBarTB->insertItem( i18n("&Change selected"), changeMenu );
       popupBarTB->insertItem( i18n("&Help"), helpMenu );
       if (QApplication::desktop()->width() > 320 ) {
           // mViewManager->getFilterAction()->plug ( tb);
       }
   }
 #endif
   // mActionQuit->plug ( mMainWindow->toolBar());
 
 
 
   //US Now connect the actions with the menue entries.
 #ifdef DESKTOP_VERSION
   mActionPrint->plug( fileMenu );
   mActionPrintDetails->plug( fileMenu );
   fileMenu->insertSeparator();
 #endif
   mActionMail->plug( fileMenu );
   fileMenu->insertSeparator();
 
   mActionNewContact->plug( fileMenu );
   mActionNewContact->plug( tb );
 
   mActionEditAddressee->plug( fileMenu );
   // if ((KGlobal::getDesktopSize() > KGlobal::Small ) ||
   //  (!KABPrefs::instance()->mMultipleViewsAtOnce ))
     mActionEditAddressee->plug( tb );
 
   fileMenu->insertSeparator();
   mActionSave->plug( fileMenu );
   fileMenu->insertItem( "&Import", ImportMenu );
   fileMenu->insertItem( "&Export", ExportMenu );
   fileMenu->insertItem( i18n("&Change"), changeMenu );
 #ifndef DESKTOP_VERSION
   if ( Ir::supported() )  fileMenu->insertItem( i18n("&Beam"), beamMenu );
 #endif
 #if 0 
   // PENDING fix MailVCard
   fileMenu->insertSeparator();
   mActionMailVCard->plug( fileMenu );
 #endif
 #ifndef DESKTOP_VERSION
   if ( Ir::supported() ) mActionBR->plug( beamMenu );
   if ( Ir::supported() ) mActionBeamVCard->plug( beamMenu );
   if ( Ir::supported() ) mActionBeam->plug( beamMenu );
 #endif
   fileMenu->insertSeparator();
   mActionQuit->plug( fileMenu );
 #ifdef _OL_IMPORT_
   mActionImportOL->plug( ImportMenu  );
 #endif
   // edit menu
   mActionUndo->plug( editMenu );
   mActionRedo->plug( editMenu );
   editMenu->insertSeparator();
   mActionCut->plug( editMenu );
   mActionCopy->plug( editMenu );
   mActionPaste->plug( editMenu );
   mActionDelete->plug( editMenu );
   editMenu->insertSeparator();
   mActionSelectAll->plug( editMenu );
 
   mActionSetFormattedName->plug( changeMenu );
   mActionRemoveVoice->plug( changeMenu );
   // settingsmings menu
 //US special menuentry to configure the addressbook resources. On KDE
 // you do that through the control center !!!
   // settingsMenu->insertSeparator();
 
   mActionConfigKAddressbook->plug( settingsMenu, 0 );
   mActionConfigResources->plug( settingsMenu,1 );
   settingsMenu->insertSeparator(2);
 
   if ( mIsPart ) {
     //US not implemented yet
     //mActionConfigShortcuts->plug( settingsMenu );
     //mActionConfigureToolbars->plug( settingsMenu );
 
   } else {
     //US not implemented yet
     //mActionKeyBindings->plug( settingsMenu );
   }
 
   settingsMenu->insertSeparator();
 
   mActionJumpBar->plug( settingsMenu );
   mActionDetails->plug( settingsMenu );
   //if (!KABPrefs::instance()->mMultipleViewsAtOnce || KGlobal::getDesktopSize() == KGlobal::Desktop  )
   mActionDetails->plug( tb );
   settingsMenu->insertSeparator();
 #ifndef DESKTOP_VERSION
   if ( Ir::supported() ) mActionBR->plug(settingsMenu );
   settingsMenu->insertSeparator();
 #endif
 
   mActionWhoAmI->plug( settingsMenu );
   mActionEditCategories->plug( settingsMenu );
   mActionEditCategories->plug( changeMenu );
   mActionCategories->plug( changeMenu );
   mActionManageCategories->plug( changeMenu );
 
   mActionCategories->plug( settingsMenu );
   mActionManageCategories->plug( settingsMenu );
 
      
   mActionWN->plug( helpMenu );
   mActionSyncHowto->plug( helpMenu );
   mActionKdeSyncHowto->plug( helpMenu );
   mActionMultiSyncHowto->plug( helpMenu );
   mActionFaq->plug( helpMenu );
   mActionLicence->plug( helpMenu );
   mActionAboutKAddressbook->plug( helpMenu );
 
   if (KGlobal::getDesktopSize() > KGlobal::Small ) {
 
       mActionSave->plug( tb );
       mViewManager->getFilterAction()->plug ( tb);
       //LR hide filteraction on started in 480x640
       if (QApplication::desktop()->width() == 480 ) {
           mViewManager->getFilterAction()->setComboWidth( 0 );
       }
       mActionUndo->plug( tb );
       mActionDelete->plug( tb );
       mActionRedo->plug( tb );
   } else {
       mActionSave->plug( tb );
       tb->enableMoving(false);
   }
   //mActionQuit->plug ( tb );
   // tb->insertWidget(-1, 0, mIncSearchWidget, 6);
 
   //US link the searchwidget first to this.
   // The real linkage to the toolbar happens later.
 //US  mIncSearchWidget->reparent(tb, 0, QPoint(50,0), TRUE);
 //US  tb->insertItem( mIncSearchWidget );
 /*US
   mIncSearchWidget = new IncSearchWidget( tb );
   connect( mIncSearchWidget, SIGNAL( doSearch( const QString& ) ),
            SLOT( incrementalSearch( const QString& ) ) );
 
   mJumpButtonBar = new JumpButtonBar( this, this );
 
 //US topLayout->addWidget( mJumpButtonBar );
  this->layout()->add( mJumpButtonBar );
 */
 
 #endif //KAB_EMBEDDED
 
   mActionExport2phone->plug( ExportMenu );
  connect ( syncMenu, SIGNAL( activated ( int )  ), syncManager, SLOT (slotSyncMenu( int ) ) );
  syncManager->fillSyncMenu();
 
 }
 void KABCore::showLicence()
 {
     KApplication::showLicence();
 }
 
 void KABCore::manageCategories( )
 {
     KABCatPrefs* cp = new KABCatPrefs(); 
     cp->show();
     int w =cp->sizeHint().width() ;
     int h = cp->sizeHint().height() ;
     int dw = QApplication::desktop()->width();
     int dh = QApplication::desktop()->height();
     cp->setGeometry( (dw-w)/2, (dh - h )/2 ,w,h );
     if ( !cp->exec() ) {
         delete cp;
         return;
     }
     int count = 0;
     int cc = 0;
     message( i18n("Please wait, processing categories..."));
     if ( cp->addCat() ) {
         KABC::AddressBook::Iterator it;
         QStringList catList = KABPrefs::instance()->mCustomCategories;
         for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) { 
             ++cc;
             if ( cc %10 == 0)
                 message(i18n("Processing contact #%1").arg(cc));
             QStringList catIncList = (*it).categories();
             int i;
             for( i = 0; i<   catIncList.count(); ++i ) {
                 if ( !catList.contains (catIncList[i])) {
                     catList.append( catIncList[i] );
                     //qDebug("add cat %s ",  catIncList[i].latin1());
                     ++count;
                 }
             }
         }
         catList.sort();
         KABPrefs::instance()->mCustomCategories = catList;
         KABPrefs::instance()->writeConfig();
         message(QString::number( count )+ i18n(" categories added to list! "));
     } else {
         QStringList catList = KABPrefs::instance()->mCustomCategories;
         QStringList catIncList;
         QStringList newCatList;
         KABC::AddressBook::Iterator it;
         for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) { 
             ++cc;
             if ( cc %10 == 0)
                 message(i18n("Processing contact #%1").arg(cc));
             QStringList catIncList = (*it).categories();
             int i;
             if ( catIncList.count() ) {
                 newCatList.clear();
                 for( i = 0; i<   catIncList.count(); ++i ) {
                     if ( catList.contains (catIncList[i])) {
                         newCatList.append( catIncList[i] );
                     }
                 }
                 newCatList.sort();
                 (*it).setCategories( newCatList );
                 mAddressBook->insertAddressee( (*it) );
             }
         } 
         setModified( true );
         mViewManager->refreshView();
         message( i18n("Removing categories done!"));
     }
     delete cp;
 }
 void KABCore::removeVoice()
 {
     if ( KMessageBox::questionYesNo( this, i18n("After importing, phone numbers\nmay have two or more types.\n(E.g. work+voice)\nThese numbers are shown as \"other\".\nClick Yes to remove the voice type\nfrom numbers with more than one type.\n\nRemove voice type?") ) == KMessageBox::No )
         return;
     XXPortSelectDialog dlg( this, false, this );
     if ( !dlg.exec() )
         return;
     mAddressBook->setUntagged();
     dlg.tagSelected();
     message(i18n("Removing voice..."), false );
     KABC::AddressBook::Iterator it;
     for ( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) {
         if ( (*it).tagged() ) {
             (*it).removeVoice();
         }
     }
     message(i18n("Refreshing view...") );
     qApp->processEvents();
     mViewManager->refreshView( "" );
     Addressee add;
     mDetails->setAddressee( add );
     message(i18n("Remove voice completed!") );
 
 
 
 }
 
 void KABCore::setFormattedName()
 {
     KABFormatPrefs setpref;
     if ( !setpref.exec() ) {
         return;
     }
     XXPortSelectDialog dlg( this, false, this );
     if ( !dlg.exec() )
         return;
     mAddressBook->setUntagged();
     dlg.tagSelected();
     int count = 0;
     KABC::AddressBook::Iterator it;
     for ( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) {
         if ( (*it).tagged() ) {
             ++count;
             if ( count %10 == 0 )
                 message(i18n("Changing contact #%1").arg( count ) );
             qApp->processEvents();
             QString fName;
             if ( setpref.simple->isChecked() )
                 fName = NameEditDialog::formattedName( (*it), NameEditDialog::SimpleName );
             else if ( setpref.full->isChecked() )
                 fName = NameEditDialog::formattedName( (*it), NameEditDialog::FullName );
             else if ( setpref.reverse->isChecked() )
                 fName = NameEditDialog::formattedName( (*it), NameEditDialog::ReverseName );
             else 
                 fName = (*it).organization();
             if ( setpref.setCompany->isChecked() )
                 if ( fName.isEmpty() || fName =="," )
                     fName = (*it).organization();
             (*it).setFormattedName( fName );
         }
     }
     message(i18n("Refreshing view...") );
     qApp->processEvents();
     mViewManager->refreshView( "" );
     Addressee add;
     mDetails->setAddressee( add );
     message(i18n("Setting formatted name completed!") );
 }
 
 void KABCore::clipboardDataChanged()
 {
 
   if ( mReadWrite )
     mActionPaste->setEnabled( !QApplication::clipboard()->text().isEmpty() );
 
 }
 
 void KABCore::updateActionMenu()
 {
   UndoStack *undo = UndoStack::instance();
   RedoStack *redo = RedoStack::instance();
 
   if ( undo->isEmpty() )
     mActionUndo->setText( i18n( "Undo" ) );
   else
     mActionUndo->setText( i18n( "Undo %1" ).arg( undo->top()->name() ) );
 
   mActionUndo->setEnabled( !undo->isEmpty() );
 
   if ( !redo->top() )
     mActionRedo->setText( i18n( "Redo" ) );
   else
     mActionRedo->setText( i18n( "Redo %1" ).arg( redo->top()->name() ) );
 
   mActionRedo->setEnabled( !redo->isEmpty() );
 }
 
 void KABCore::configureKeyBindings()
 {
 #ifndef KAB_EMBEDDED
   KKeyDialog::configure( actionCollection(), true );
 #else //KAB_EMBEDDED
   qDebug("KABCore::configureKeyBindings() not implemented");
 #endif //KAB_EMBEDDED
 }
 
 #ifdef KAB_EMBEDDED
 void KABCore::configureResources()
 {
   KRES::KCMKResources dlg( this, "" , 0 );
 
   if ( !dlg.exec() )
     return;
   KMessageBox::information( this,  i18n("Please restart to get the \nchanged resources (re)loaded!\n") );
 }
 #endif //KAB_EMBEDDED
 
 
 /* this method will be called through the QCop interface from Ko/Pi to select addresses
  * for the attendees list of an event.
  */
 void KABCore::requestForNameEmailUidList(const QString& sourceChannel, const QString& uid)
 {
-  QStringList nameList;
-  QStringList emailList;
-  QStringList uidList;
+
   bool ok = false;
+  mEmailSourceChannel = sourceChannel;
   int wid = uid.toInt( &ok );
+  qDebug("UID %s ", uid.latin1());
   if ( ok ) {
       if ( wid != QApplication::desktop()->width() ) {
           qDebug("KA/Pi: Request from different desktop geometry. Resizing ...");
           message( i18n("Resizing, please wait...") );
-          raise();
-          qApp->processEvents();
+          mMainWindow->showMinimized();
+          /*
+          {
+              QCopEnvelope e("QPE/Application/kapi", "callContactdialog()");
+          }
+          */
+          QTimer::singleShot( 1,this, SLOT ( resizeAndCallContactdialog() ) );
+          return;
       }
 
   } else {
       qDebug("KABCore::requestForNameEmailUidList:: Got invalid uid ");
   }
- 
+  callContactdialog();
+  //QCopEnvelope e("QPE/Application/kapi", "callContactdialog()");
+
+}
+void KABCore::resizeAndCallContactdialog()
+{
+    updateMainWindow();
+    QTimer::singleShot( 100,this, SLOT ( callContactdialog() ) );
+}
+
+void KABCore::callContactdialog()
+{
+    QStringList nameList;
+  QStringList emailList;
+  QStringList uidList; 
+  qDebug("WIDTH %d ",   QApplication::desktop()->width()       );
   KABC::Addressee::List list = KABC::AddresseeDialog::getAddressees(this);
   uint i=0;
   for (i=0; i < list.count(); i++)
   {
         nameList.append(list[i].realName());
         emailList.append(list[i].preferredEmail());
         uidList.append(list[i].uid());
   }
+  QString uid = "unnamed";
   //qDebug("%s %s ", sourceChannel.latin1(), uid.latin1());
-  bool res = ExternalAppHandler::instance()->returnNameEmailUidListFromKAPI(sourceChannel, uid, nameList, emailList, uidList);
+  bool res = ExternalAppHandler::instance()->returnNameEmailUidListFromKAPI(mEmailSourceChannel, uid, nameList, emailList, uidList);
 
 }
-
 /* this method will be called through the QCop interface from Ko/Pi to select birthdays
  * to put them into the calendar.
  */
 void KABCore::requestForBirthdayList(const QString& sourceChannel, const QString& uid)
 {
   //  qDebug("KABCore::requestForBirthdayList");
   QStringList birthdayList;
   QStringList anniversaryList;
   QStringList realNameList;
   QStringList preferredEmailList;
   QStringList assembledNameList;
   QStringList uidList;
 
   KABC::AddressBook::Iterator it;
 
     int count = 0;
     for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) { 
         ++count;
     }
     QProgressBar bar(count,0 );
     int w = 300;
     if ( QApplication::desktop()->width() < 320 )
         w = 220;
     int h = bar.sizeHint().height() ;
     int dw = QApplication::desktop()->width();
     int dh = QApplication::desktop()->height();
     bar.setGeometry( (dw-w)/2, (dh - h )/2 ,w,h );
     bar.show();
     bar.setCaption (i18n("Collecting birthdays - close to abort!") );
     qApp->processEvents();
 
     QDate bday;
     QString anni;
     QString formattedbday;
 
   for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it )  
   {
         if ( ! bar.isVisible() )
             return;
         bar.setProgress( count++ );
         qApp->processEvents();
         bday = (*it).birthday().date();
         anni = (*it).custom("KADDRESSBOOK", "X-Anniversary" );
 
         if ( bday.isValid() || !anni.isEmpty())
         {
           if (bday.isValid()) 
             formattedbday = KGlobal::locale()->formatDate(bday,  true, KLocale::ISODate);
           else
             formattedbday = "NOTVALID";
           if (anni.isEmpty())
             anni = "INVALID";
             
           birthdayList.append(formattedbday);
           anniversaryList.append(anni); //should be ISODate
           realNameList.append((*it).realName());
           preferredEmailList.append((*it).preferredEmail());
           assembledNameList.append((*it).assembledName());
           uidList.append((*it).uid());
 
           //qDebug("found birthday in KA/Pi: %s,%s,%s,%s: %s, %s", (*it).realName().latin1(), (*it).preferredEmail().latin1(), (*it).assembledName().latin1(), (*it).uid().latin1(), formattedbday.latin1(), anni.latin1() );
         }
   }
 
   bool res = ExternalAppHandler::instance()->returnBirthdayListFromKAPI(sourceChannel, uid, birthdayList, anniversaryList, realNameList, preferredEmailList, assembledNameList, uidList);
 
 }
 
 /* this method will be called through the QCop interface from other apps to show details of a contact.
  */
 void KABCore::requestForDetails(const QString& sourceChannel, const QString& sessionuid, const QString& name, const QString& email, const QString& uid)
 {
     //qDebug("KABCore::requestForDetails %s %s %s %s %s", sourceChannel.latin1(), sessionuid.latin1(), name.latin1(), email.latin1(), uid.latin1());
 
     QString foundUid = QString::null;
     if ( ! uid.isEmpty() ) {
         Addressee adrr = mAddressBook->findByUid( uid );
         if (  !adrr.isEmpty() ) {
             foundUid = uid;
         }
             if ( email == "sendbacklist" ) {
                 //qDebug("ssssssssssssssssssssssend ");
                 QStringList nameList;
                 QStringList emailList;
                 QStringList uidList;
                 nameList.append(adrr.realName());
                 emailList = adrr.emails();
                 uidList.append( adrr.preferredEmail());
                 bool res = ExternalAppHandler::instance()->returnNameEmailUidListFromKAPI("QPE/Application/ompi", uid, nameList, emailList, uidList);
                 return;
             }
         
     }
   
   if ( email == "sendbacklist" ) 
       return;
   if (foundUid.isEmpty())
   {
     //find the uid of the person first
     Addressee::List namelist;
     Addressee::List emaillist;
 
     if (!name.isEmpty())
       namelist = mAddressBook->findByName( name );
 
     if (!email.isEmpty())
       emaillist = mAddressBook->findByEmail( email );
     //qDebug("count %d %d ",  namelist.count(),emaillist.count() );
     //check if we have a match in Namelist and Emaillist
     if ((namelist.count() == 0) && (emaillist.count() > 0)) {
       foundUid = emaillist[0].uid();
     }
     else if ((namelist.count() > 0) && (emaillist.count() == 0))
       foundUid = namelist[0].uid();
     else
     {
       for (int i = 0; i < namelist.count(); i++)
       {
         for (int j = 0; j < emaillist.count(); j++)
         {
           if (namelist[i] == emaillist[j])
           {
             foundUid = namelist[i].uid();
           }
         }
       }
     }
   }
   else
   {
     foundUid = uid;
   }
 
   if (!foundUid.isEmpty())
   {
    
     // raise Ka/Pi if it is in the background
 #ifndef DESKTOP_VERSION
 #ifndef KORG_NODCOP
       //QCopEnvelope e("QPE/Application/kapi", "raise()");
 #endif
 #endif
     
     mMainWindow->showMaximized();
     mMainWindow-> raise();
 
     mViewManager->setSelected( "", false);
     mViewManager->refreshView( "" );
     mViewManager->setSelected( foundUid, true );
     mViewManager->refreshView( foundUid );
 
     if ( !mMultipleViewsAtOnce )
     {
       setDetailsVisible( true );
       mActionDetails->setChecked(true);
     }
   }
 }
 
 void KABCore::whatsnew()
 {
     KApplication::showFile( "KDE-Pim/Pi Version Info", "kdepim/WhatsNew.txt" );
 }
 void KABCore::synchowto()
 {
     KApplication::showFile( "KDE-Pim/Pi Synchronization HowTo", "kdepim/SyncHowto.txt" );
 }
 void KABCore::kdesynchowto()
 {
     KApplication::showFile( "KDE-Pim/Pi Synchronization HowTo", "kdepim/Zaurus-KDE_syncHowTo.txt" );
 }
 void KABCore::multisynchowto()
 {
     KApplication::showFile( "KDE-Pim/Pi Synchronization HowTo", "kdepim/MultiSyncHowTo.txt" );
 }
 void  KABCore::faq()
 {
   KApplication::showFile( "KA/Pi FAQ", "kdepim/kaddressbook/kapiFAQ.txt" );
 }
 
 #include <libkcal/syncdefines.h>
 
 KABC::Addressee KABCore::getLastSyncAddressee()
 {
     Addressee lse; 
     QString mCurrentSyncDevice = syncManager->getCurrentSyncDevice();
 
     //qDebug("CurrentSyncDevice %s ",mCurrentSyncDevice .latin1() );
     lse =   mAddressBook->findByUid( "last-syncAddressee-"+mCurrentSyncDevice );
     if (lse.isEmpty()) {
         qDebug("KA: Creating new last-syncAddressee ");
         lse.setUid( "last-syncAddressee-"+mCurrentSyncDevice ); 
         QString sum = "";
         if ( mGlobalSyncMode == SYNC_MODE_EXTERNAL )
             sum = "E: ";
         lse.setFamilyName("!"+sum+mCurrentSyncDevice + i18n(" - sync event"));
         lse.setRevision( mLastAddressbookSync );
         lse.setCategories( i18n("SyncEvent") );
         mAddressBook->insertAddressee( lse );
     }
     return lse;
 }
 int  KABCore::takeAddressee( KABC::Addressee* local,  KABC::Addressee* remote, int mode , bool full )
 {
  
     //void setZaurusId(int id);
     // int zaurusId() const;
     //  void setZaurusUid(int id);
    // int zaurusUid() const;
    // void setZaurusStat(int id);
    // int zaurusStat() const;
     // 0 equal
     // 1 take local
     // 2 take remote
     // 3 cancel 
     QDateTime lastSync = mLastAddressbookSync;
     QDateTime localMod = local->revision();
     QDateTime remoteMod = remote->revision();
 
     QString mCurrentSyncDevice = syncManager->getCurrentSyncDevice();
 
     if ( mGlobalSyncMode == SYNC_MODE_EXTERNAL ) {
         bool remCh, locCh;
         remCh = ( remote->getCsum(mCurrentSyncDevice) != local->getCsum(mCurrentSyncDevice) );
         //if ( remCh )
         //  qDebug("loc %s  rem %s", local->getCsum(mCurrentSyncDevice).latin1(), remote->getCsum(mCurrentSyncDevice).latin1() );
         locCh = ( localMod > mLastAddressbookSync );
         //qDebug("cahnged rem %d loc %d",remCh, locCh  );
         if ( !remCh && ! locCh ) {
             //qDebug("both not changed ");
             lastSync = localMod.addDays(1);
             if ( mode <= SYNC_PREF_ASK )
                 return 0;
         } else {
             if ( locCh ) {
                 //qDebug("loc changed %s %s",  localMod.toString().latin1(), mLastAddressbookSync.toString().latin1());
                 lastSync = localMod.addDays( -1 );
                 if ( !remCh )
                     remoteMod =( lastSync.addDays( -1 ) );
             } else {
                 //qDebug(" not loc changed ");
                 lastSync = localMod.addDays( 1 );
                 if ( remCh ) {
                     //qDebug("rem changed ");
                     remoteMod =( lastSync.addDays( 1 ) );
                 }
                 
             }
         }
         full = true;  
         if ( mode < SYNC_PREF_ASK )
             mode = SYNC_PREF_ASK;
     } else {
           if ( localMod == remoteMod )
                 return 0;
         
     }
     //qDebug("%s %s --- %d %d", localMod.toString().latin1() , remoteMod.toString().latin1(), localMod.time().msec(), remoteMod.time().msec());  
     //qDebug("lastsync %s ", lastSync.toString().latin1()    );
     //full = true; //debug only
     if ( full ) {
         bool equ = ( (*local) == (*remote) );
         if ( equ ) {
             //qDebug("equal ");
             if ( mGlobalSyncMode == SYNC_MODE_EXTERNAL ) {
                 local->setCsum( mCurrentSyncDevice, remote->getCsum(mCurrentSyncDevice) );
             }
             if ( mode < SYNC_PREF_FORCE_LOCAL )
                 return 0;
               
         }//else //debug only
         //qDebug("not equal %s %s ", local->summary().latin1(), remote->summary().latin1());
     }
     int result;
     bool localIsNew;
     //qDebug("%s -- %s mLastCalendarSync %s lastsync %s --- local %s remote %s ",local->summary().latin1(), remote->summary().latin1(),mLastCalendarSync.toString().latin1() ,lastSync.toString().latin1()  ,  local->lastModified().toString().latin1() , remote->lastModified().toString().latin1()  );
 
     if ( full && mode < SYNC_PREF_NEWEST )
         mode = SYNC_PREF_ASK;
 
     switch( mode ) {
     case SYNC_PREF_LOCAL:
         if ( lastSync > remoteMod )
             return 1;
         if ( lastSync > localMod )
             return 2;
         return 1;
         break;
     case SYNC_PREF_REMOTE:
         if ( lastSync > remoteMod )
             return 1;
         if ( lastSync > localMod )
             return 2;
         return 2;
         break;
     case SYNC_PREF_NEWEST:
         if ( localMod > remoteMod )
             return 1;
         else
             return 2;
         break;
     case SYNC_PREF_ASK: 
         //qDebug("lsy %s  ---  lo %s  --- re %s ", lastSync.toString().latin1(), localMod.toString().latin1(), remoteMod.toString().latin1()  );
         if ( lastSync > remoteMod )
             return 1;
         if ( lastSync > localMod ) {
             return 2;
         }
         localIsNew = localMod >= remoteMod;
         //qDebug("conflict! ************************************** ");
         {
             KABC::AddresseeChooser acd ( *local,*remote, localIsNew , this );
             result = acd.executeD(localIsNew);
             return result;
         }
         break;
     case SYNC_PREF_FORCE_LOCAL:
         return 1;
         break;
     case SYNC_PREF_FORCE_REMOTE:
         return 2;
         break;
        
     default:
         // SYNC_PREF_TAKE_BOTH not implemented
         break;
     }
     return 0;
 }
 
 
 bool KABCore::synchronizeAddressbooks( KABC::AddressBook* local, KABC::AddressBook* remote,int mode)
 {
     bool syncOK = true;
     int addedAddressee = 0;
     int addedAddresseeR = 0;
     int deletedAddresseeR = 0;
     int deletedAddresseeL = 0;
     int changedLocal = 0;
     int changedRemote = 0;
     int filteredIN = 0;
     int filteredOUT = 0;
 
     QString mCurrentSyncName = syncManager->getCurrentSyncName();
     QString mCurrentSyncDevice = syncManager->getCurrentSyncDevice();
 
     //QPtrList<Addressee> el = local->rawAddressees(); 
     Addressee addresseeR;
     QString uid;
     int take;
     Addressee addresseeL;
     Addressee addresseeRSync;
     Addressee addresseeLSync;
     // KABC::Addressee::List  addresseeRSyncSharp = remote->getExternLastSyncAddressees();
     //KABC::Addressee::List  addresseeLSyncSharp = local->getExternLastSyncAddressees();
     bool fullDateRange = false;
     local->resetTempSyncStat();
     mLastAddressbookSync = QDateTime::currentDateTime();
     if ( syncManager->syncWithDesktop() ) {
         // remote->removeSyncInfo( QString());//remove all info
         if (  KSyncManager::mRequestedSyncEvent.isValid() ) {
             mLastAddressbookSync = KSyncManager::mRequestedSyncEvent;
             qDebug("KA: using extern time for calendar sync: %s ", mLastAddressbookSync.toString().latin1() );
         } else {
             qDebug("KA: KSyncManager::mRequestedSyncEvent has invalid datatime ");
         }
     }
     QDateTime modifiedCalendar = mLastAddressbookSync;
     addresseeLSync = getLastSyncAddressee();
     qDebug("KA: Last Sync %s ", addresseeLSync.revision().toString().latin1());
     addresseeR = remote->findByUid("last-syncAddressee-"+mCurrentSyncName );
     if ( !addresseeR.isEmpty() ) {
         addresseeRSync = addresseeR;
         remote->removeAddressee(addresseeR );
 
     } else {
         if ( mGlobalSyncMode == SYNC_MODE_EXTERNAL ) {
             addresseeRSync = addresseeLSync         ;
         } else {
             //qDebug("FULLDATE 1");
             fullDateRange = true;
             Addressee newAdd;
             addresseeRSync = newAdd;
             addresseeRSync.setFamilyName(mCurrentSyncName + i18n(" - sync addressee"));
diff --git a/kaddressbook/kabcore.h b/kaddressbook/kabcore.h
index c185117..47ea152 100644
--- a/kaddressbook/kabcore.h
+++ b/kaddressbook/kabcore.h
@@ -1,520 +1,524 @@
 /*
     This file is part of KAddressbook.
     Copyright (c) 2003 Tobias Koenig <tokoe@kde.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     As a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 
 #ifndef KABCORE_H
 #define KABCORE_H
 
 #include <kabc/field.h>
 
 #ifndef KAB_EMBEDDED
 #endif //KAB_EMBEDDED
 #include <qdict.h>
 #include <qtimer.h>
 
 #include <qwidget.h>
 #include <qpopupmenu.h>
 #include <ksyncmanager.h>
 #ifndef DESKTOP_VERSION
 #include <qcopchannel_qws.h> 
 #endif
 
 namespace KABC {
 class AddressBook;
 }
 
 #ifndef KAB_EMBEDDED
 class KAboutData;
 class KConfig;
 
 class KAddressBookService;
 class LDAPSearchDialog;
 #else //KAB_EMBEDDED
 class KAddressBookMain;
 //US class QAction;
 #endif //KAB_EMBEDDED
 class KCMultiDialog;
 class KXMLGUIClient;
 class ExtensionManager;
 class XXPortManager;
 class JumpButtonBar;
 class IncSearchWidget;
 class KDGanttMinimizeSplitter;
 class KAction;
 class KActionCollection;
 class KToggleAction;
 class KSyncProfile;
 
 class QAction;
 class QMenuBar;
 class QSplitter;
 class ViewContainer;
 class ViewManager;
 class AddresseeEditorDialog;
 class Ir;
 
 class KABCore : public QWidget, public KSyncInterface
 {
   Q_OBJECT
 
   public:
     KABCore( KAddressBookMain *client, bool readWrite, QWidget *parent, const char *name = 0 );
 
 
     ~KABCore();
 
 
 #ifdef KAB_EMBEDDED
   //US added functionality
     QPopupMenu* getViewMenu() {return viewMenu;}
     QPopupMenu* getFilterMenu() {return filterMenu;}
     QPopupMenu* getSettingsMenu() {return settingsMenu;}
     void addActionsManually();
 #endif //KAB_EMBEDDED
     /**
       Restores the global settings.
      */
     void restoreSettings();
 
   
 
     /**
       Returns a pointer to the StdAddressBook of the application.
      */
     KABC::AddressBook *addressBook() const;
 
     /**
       Returns a pointer to the KConfig object of the application.
      */
     static KConfig *config();
 
     /**
       Returns a pointer to the global KActionCollection object. So
       other classes can register their actions easily.
      */
     KActionCollection *actionCollection() const;
 
     /**
       Returns the current search field of the Incremental Search Widget.
      */
     KABC::Field *currentSearchField() const;
 
     /**
       Returns the uid list of the currently selected contacts.
      */
     QStringList selectedUIDs() const;
 
     /**
       Displays the ResourceSelectDialog and returns the selected
       resource or a null pointer if no resource was selected by
       the user.
      */
     KABC::Resource *requestResource( QWidget *parent );
 
 #ifndef KAB_EMBEDDED
     static KAboutData *createAboutData();
 #endif //KAB_EMBEDDED
 
 #ifdef KAB_EMBEDDED
     inline QPopupMenu* getImportMenu() { return ImportMenu;}
     inline QPopupMenu* getExportMenu() { return ExportMenu;}
 #endif //KAB_EMBEDDED
 
   public slots:
 #ifdef KAB_EMBEDDED
     void createAboutData();
 #endif //KAB_EMBEDDED
     void setDetailsToggle();
 
     void showLicence();
     void faq();
     void whatsnew() ;
     void synchowto() ;
     void multisynchowto() ;
     void kdesynchowto() ;
     void writeToPhone();
 
     /**
       Is called whenever a contact is selected in the view.
      */
     void setContactSelected( const QString &uid );
 
     /**
       Opens the preferred mail composer with all selected contacts as
       arguments.
      */
     void sendMail();
 
     /**
       Opens the preferred mail composer with the given contacts as
       arguments.
      */
     void sendMail( const QString& email );
 
 
     void mailVCard();
     void mailVCard(const QStringList& uids);
 
     /**
       Beams the "WhoAmI contact.
      */
     void beamMySelf();
 
     void beamVCard();
     void export2phone();
     void beamVCard(const QStringList& uids);
     void beamDone( Ir *ir );
 
 
     /**
       Starts the preferred web browser with the given URL as argument.
      */
     void browse( const QString& url );
 
     /**
       Select all contacts in the view.
      */
     void selectAllContacts();
 
     /**
       Deletes all selected contacts from the address book.
      */
     void deleteContacts();
 
     /**
       Deletes given contacts from the address book.
 
       @param uids The uids of the contacts, which shall be deleted.
      */
     void deleteContacts( const QStringList &uids );
 
     /**
       Copys the selected contacts into clipboard for later pasting.
      */
     void copyContacts();
 
     /**
       Cuts the selected contacts and stores them for later pasting.
      */
     void cutContacts();
 
     /**
       Paste contacts from clipboard into the address book.
      */
     void pasteContacts();
 
     /**
       Paste given contacts into the address book.
 
       @param list The list of addressee, which shall be pasted.
      */
     void pasteContacts( KABC::Addressee::List &list );
 
     /**
       Sets the whoAmI contact, that is used by many other programs to
       get personal information about the current user.
      */
     void setWhoAmI();
 
     /**
       Displays the category dialog and applies the result to all
       selected contacts.
      */
     void setCategories();
     void manageCategories();
     void editCategories();
 
     /**
       Sets the field list of the Incremental Search Widget.
      */
     void setSearchFields( const KABC::Field::List &fields );
 
     /**
       Search with the current search field for a contact, that matches
       the given text, and selects it in the view.
      */
     void incrementalSearch( const QString& text );
 
     /**
       Marks the address book as modified.
      */
     void setModified();
     /**
       Marks the address book as modified without refreshing the view.
      */
     void setModifiedWOrefresh();
 
     /**
       Marks the address book as modified concerning the argument.
      */
     void setModified( bool modified );
 
     /**
       Returns whether the address book is modified.
      */
     bool modified() const;
 
     /**
       Called whenever an contact is modified in the contact editor
       dialog or the quick edit.
      */
     void contactModified( const KABC::Addressee &addr );
     void addrModified( const KABC::Addressee &addr, bool updateDetails = true );
 
     /**
       DCOP METHODS.
      */
     void addEmail( QString addr );
     void importVCard( const KURL& url, bool showPreview );
     void importVCard( const QString& vCard, bool showPreview );
     void newContact();
     QString getNameByPhone( const QString& phone );
     /**
       END DCOP METHODS
      */
 
     /**
       Saves the contents of the AddressBook back to disk.
      */
     void save();
 
     /**
       Undos the last command using the undo stack.
      */
     void undo();
 
     /**
       Redos the last command that was undone, using the redo stack.
      */
     void redo();
 
     /**
       Shows the edit dialog for the given uid. If the uid is QString::null,
       the method will try to find a selected addressee in the view.
      */
     void editContact( const QString &uid /*US = QString::null*/ );
 //US added a second method without defaultparameter
     void editContact2();
 
     /**
       Shows or edits the detail view for the given uid. If the uid is QString::null,
       the method will try to find a selected addressee in the view.
      */
     void executeContact( const QString &uid /*US = QString::null*/ );
 
     /**
       Launches the configuration dialog.
      */
     void openConfigDialog();
 
     /**
       Launches the ldap search dialog.
      */
     void openLDAPDialog();
 
     /**
       Creates a KAddressBookPrinter, which will display the print
       dialog and do the printing.
      */
     void print();
 
     /**
       Registers a new GUI client, so plugins can register its actions.
      */
    void addGUIClient( KXMLGUIClient *client );
 
    void requestForNameEmailUidList(const QString& sourceChannel, const QString& sessionuid);
    void requestForDetails(const QString& sourceChannel, const QString& sessionuid, const QString& name, const QString& email, const QString& uid);
    void requestForBirthdayList(const QString& sourceChannel, const QString& sessionuid);
 
 
   signals:
     void contactSelected( const QString &name );
     void contactSelected( const QPixmap &pixmap );
   public slots:
     void recieve(QString cmsg );
     void getFile( bool success );
     void syncFileRequest();
     void setDetailsVisible( bool visible );
     void setDetailsToState();
    
     void saveSettings();
 
   private slots:
     void updateToolBar();
     void updateMainWindow();
     void receive( const QCString& cmsg, const QByteArray& data );
     void toggleBeamReceive( );
     void disableBR(bool);
     void setJumpButtonBarVisible( bool visible );
     void setJumpButtonBar( bool visible );
     void setCaptionBack();
+    void resizeAndCallContactdialog();
+    void callContactdialog();
+
   void importFromOL();
     void extensionModified( const KABC::Addressee::List &list );
     void extensionChanged( int id );
     void clipboardDataChanged();
     void updateActionMenu();
     void configureKeyBindings();
     void removeVoice();
     void setFormattedName();
 #ifdef KAB_EMBEDDED
     void configureResources();
 #endif //KAB_EMBEDDED
 
     void slotEditorDestroyed( const QString &uid );
     void configurationChanged();
     void addressBookChanged();
 
   private:
+    QString mEmailSourceChannel;
     void resizeEvent(QResizeEvent* e );
     bool mBRdisabled;
 #ifndef DESKTOP_VERSION
     QCopChannel* infrared;
 #endif
     QTimer *mMessageTimer;
     void initGUI();
     void initActions();
     QString getPhoneFile();
 
     AddresseeEditorDialog *createAddresseeEditorDialog( QWidget *parent,
                                                         const char *name = 0 );
 
  KXMLGUIClient *mGUIClient;
 
   KABC::AddressBook *mAddressBook;
 
   ViewManager *mViewManager;
   // QSplitter *mDetailsSplitter;
   KDGanttMinimizeSplitter *mExtensionBarSplitter;
   ViewContainer *mDetails;
   KDGanttMinimizeSplitter* mMiniSplitter;
   XXPortManager *mXXPortManager;
   JumpButtonBar *mJumpButtonBar;
   IncSearchWidget *mIncSearchWidget;
   ExtensionManager *mExtensionManager;
 
   KCMultiDialog *mConfigureDialog;
 
 #ifndef KAB_EMBEDDED
     LDAPSearchDialog *mLdapSearchDialog;
 #endif //KAB_EMBEDDED
     // QDict<AddresseeEditorDialog> mEditorDict;
     AddresseeEditorDialog *mEditorDialog;
     bool mReadWrite;
     bool mModified;
     bool mIsPart;
     bool mMultipleViewsAtOnce;
 
 
     //US file menu
     KAction *mActionMail;
     KAction *mActionBeam;
     KToggleAction *mActionBR;
     KAction *mActionExport2phone;
     KAction* mActionPrint;
     KAction* mActionPrintDetails;
     KAction* mActionNewContact;
     KAction *mActionSave;
     KAction *mActionEditAddressee;
     KAction *mActionMailVCard;
     KAction *mActionBeamVCard;
 
     KAction *mActionQuit;
 
     //US edit menu
     KAction *mActionCopy;
     KAction *mActionCut;
     KAction *mActionPaste;
     KAction *mActionSelectAll;
     KAction *mActionUndo;
     KAction *mActionRedo;
     KAction *mActionDelete;
 
     //US settings menu
     KAction *mActionConfigResources;
     KAction *mActionConfigKAddressbook;
     KAction *mActionConfigShortcuts;
     KAction *mActionConfigureToolbars;
     KAction *mActionKeyBindings;
     KToggleAction *mActionJumpBar;
     KToggleAction *mActionDetails;
     KAction *mActionWhoAmI;
     KAction *mActionCategories;
     KAction *mActionEditCategories;
     KAction *mActionManageCategories;
     KAction *mActionAboutKAddressbook;
     KAction *mActionLicence;
     KAction *mActionFaq;
     KAction *mActionWN;
     KAction *mActionSyncHowto;
     KAction *mActionKdeSyncHowto;
     KAction *mActionMultiSyncHowto;
 
     KAction *mActionDeleteView;
 
     QPopupMenu *viewMenu;
     QPopupMenu *filterMenu;
     QPopupMenu *settingsMenu;
     QPopupMenu *changeMenu;
     QPopupMenu *beamMenu;
 //US    QAction *mActionSave;
     QPopupMenu *ImportMenu;
     QPopupMenu *ExportMenu;
     //LR additional methods
     KAction *mActionRemoveVoice;
     KAction *mActionSetFormattedName;
     KAction * mActionImportOL;
 
 #ifndef KAB_EMBEDDED
     KAddressBookService *mAddressBookService;
 #endif //KAB_EMBEDDED
 
     class KABCorePrivate;
     KABCorePrivate *d;
     //US    bool mBlockSaveFlag;
 
 #ifdef KAB_EMBEDDED
     KAddressBookMain *mMainWindow;  // should be the same like mGUIClient
 #endif //KAB_EMBEDDED
 
     //this are the overwritten callbackmethods from the syncinterface
     virtual bool sync(KSyncManager* manager, QString filename, int mode);
     virtual bool syncExternal(KSyncManager* manager, QString resource);
     virtual void removeSyncInfo( QString syncProfile);
     bool syncPhone();
     void message( QString m , bool startTimer = true);
 
     // LR *******************************
     // sync stuff!
     QString sentSyncFile();
     QPopupMenu *syncMenu;
     KSyncManager* syncManager;
     int mGlobalSyncMode; 
     bool synchronizeAddressbooks( KABC::AddressBook* local, KABC::AddressBook* remote,int mode);
     KABC::Addressee getLastSyncAddressee();
     QDateTime mLastAddressbookSync;
     int  takeAddressee( KABC::Addressee* local,  KABC::Addressee* remote, int mode , bool full );
     // *********************
 
 };
 
 #endif
diff --git a/korganizer/mainwindow.cpp b/korganizer/mainwindow.cpp
index 8a4c7eb..6ddced0 100644
--- a/korganizer/mainwindow.cpp
+++ b/korganizer/mainwindow.cpp
@@ -363,803 +363,812 @@ MainWindow::~MainWindow()
 {
     //qDebug("MainWindow::~MainWindow() ");
     //save toolbar location
     delete mCalendar;
     delete mSyncManager;
 #ifndef DESKTOP_VERSION
     if ( infrared )
         delete infrared;
 #endif
 
 
 }
 
 void MainWindow::disableBR(bool b)
 {
 #ifndef DESKTOP_VERSION
     if ( b ) {
         if ( infrared ) {
             toggleBeamReceive();
             mBRdisabled = true;
         }
         mBRdisabled = true;
     } else {
         if ( mBRdisabled ) {
             mBRdisabled = false;
             //makes no sense,because other cal ap is probably running
             // toggleBeamReceive(); 
         }
     }
 #endif
 
 }
 bool MainWindow::beamReceiveEnabled()
 {
 #ifndef DESKTOP_VERSION
     return ( infrared != 0 );
 #endif
     return false;
 }
 
 void MainWindow::toggleBeamReceive()
 {
     if ( mBRdisabled  )
         return;
 #ifndef DESKTOP_VERSION
     if ( infrared ) {
         qDebug("disable BeamReceive ");
         delete infrared;
         infrared = 0;
         brAction->setOn(false);
         return;
     } 
     qDebug("enable BeamReceive ");
     brAction->setOn(true);
     infrared = new QCopChannel("QPE/Application/datebook",this, "channel" ) ;   
     QObject::connect( infrared, SIGNAL (received ( const QCString &, const QByteArray & )),this, SLOT(recieve(  const QCString&, const QByteArray& )));
 #endif
 }
 void MainWindow::showMaximized () 
 {
 #ifndef DESKTOP_VERSION
     if ( ! globalFlagBlockStartup )
         if ( mClosed )
             mView->goToday();
 #endif
     QWidget::showMaximized () ;
     mClosed = false;
 }
 void MainWindow::closeEvent( QCloseEvent* ce )
 {
 
 
 
     if ( ! KOPrefs::instance()->mAskForQuit ) {
         saveOnClose();
         mClosed = true;
         ce->accept();
         return;
 
     }
 
     switch( QMessageBox::information( this, "KO/Pi",
                                       i18n("Do you really want\nto close KO/Pi?"),
                                       i18n("Close"), i18n("No"),
                                       0, 0 ) ) {
     case 0:
         saveOnClose();
         mClosed = true;
         ce->accept();
         break;
     case 1:
         ce->ignore();
         break;
     case 2:
 
     default:
         break;
     }
 
 
 }
 
 void MainWindow::recieve( const QCString& cmsg, const QByteArray& data )
 {
     QDataStream stream( data, IO_ReadOnly );
     // QMessageBox::about( this, "About KOrganizer/Pi", "*" +msg +"*" );
     //QString datamess;
     //qDebug("message ");
     qDebug("KO: QCOP message received: %s ", cmsg.data()  );
  
     if ( cmsg == "setDocument(QString)" ) {
         QDataStream stream( data, IO_ReadOnly );
         QString fileName;
         stream >> fileName;
         //qDebug("filename %s ", fileName.latin1());
         showMaximized();
         raise();
         KOPrefs::instance()->mLastSyncedLocalFile = fileName ;
         mSyncManager->slotSyncMenu( 1002 );
         return;
     }
 
     if ( cmsg == "-writeFile" ) {
         // I made from the "-writeFile" an "-writeAlarm"
         mView->viewManager()->showWhatsNextView();
         mCalendar->checkAlarmForIncidence( 0, true);
         showMaximized();
         raise();
         return;
 
     }
     if ( cmsg == "-writeFileSilent" ) {
         // I made from the "-writeFile" an "-writeAlarm"
         // mView->viewManager()->showWhatsNextView();
         mCalendar->checkAlarmForIncidence( 0, true);
         //showMaximized();
         //raise();
         hide();
         return;
     }
     if ( cmsg == "-newCountdown" ) {
         qDebug("newCountdown ");
 
     }
     QString msg ;
     QString allmsg = cmsg;
     while ( allmsg.length() > 0 ) {
         int nextC = allmsg.find( "-", 1 );
         if ( nextC == -1 ) {
             msg = allmsg;
             allmsg = "";
         } else{
             msg = allmsg.left( nextC );
             allmsg = allmsg.mid( nextC,  allmsg.length()-nextC );
         }
         //qDebug("msg: %s  all: %s ", msg.latin1(), allmsg.latin1() );
         if ( msg == "-newEvent" ) {
             mView->newEvent();
         }
         if ( msg == "-newTodo" ) {
             mView->newTodo();
 
         }
         if ( msg == "-showWN" ) {
             mView->viewManager()->showWhatsNextView();
         }
         if ( msg == "-showTodo" ) {
             mView->viewManager()->showTodoView();
         }
         if ( msg == "-showList"  ) {
             mView->viewManager()->showListView();
         }
         else if ( msg == "-showDay" ) {
             mView->viewManager()->showDayView();
         }
         else if ( msg == "-showWWeek"  ) {
             mView->viewManager()->showWorkWeekView();
         }
         else if ( msg == "-ringSync"  ) {
             mSyncManager->multiSync( false );
         }
         else if ( msg == "-showWeek" ) {
             mView->viewManager()->showWeekView();
         }
         else if ( msg == "-showTodo" ) {
             mView->viewManager()->showTodoView();
         }
         else if ( msg == "-showJournal"  ) {
             mView->dateNavigator()->selectDates( 1 );
             mView->dateNavigator()->selectToday();
             mView->viewManager()->showJournalView();
         }
         else if ( msg == "-showKO" ) {
             mView->viewManager()->showNextXView();
         }
         else if ( msg == "-showWNext"  ) {
             mView->viewManager()->showWhatsNextView();
         }
         else if ( msg == "nextView()" ) {
             mView->viewManager()->showNextView();
         }
         else if ( msg == "-showNextXView" ) {
             mView->viewManager()->showNextXView();
         }
 
 
     }
 
     showMaximized();
     raise();
 }
 
 QPixmap MainWindow::loadPixmap( QString name )
 {
     return SmallIcon( name );
 
 }
 void MainWindow::initActions()
 {
     //KOPrefs::instance()->mShowFullMenu
     iconToolBar->clear();
     KOPrefs *p = KOPrefs::instance();
     //QPEMenuBar *menuBar1;// = new QPEMenuBar( iconToolBar );
 
     QPopupMenu *viewMenu = new QPopupMenu( this );
     QPopupMenu *actionMenu = new QPopupMenu( this );
     QPopupMenu *importMenu = new QPopupMenu( this );
     QPopupMenu *importMenu_X = new QPopupMenu( this );
     QPopupMenu *exportMenu_X = new QPopupMenu( this );
     QPopupMenu *beamMenu_X = new QPopupMenu( this );
     selectFilterMenu = new QPopupMenu( this );
     selectFilterMenu->setCheckable( true );
     syncMenu = new QPopupMenu( this );
     configureAgendaMenu = new QPopupMenu( this );
     configureToolBarMenu = new QPopupMenu( this );
     QPopupMenu *helpMenu = new QPopupMenu( this );
     QIconSet icon;
     int pixWid = 22, pixHei = 22;
     QString pathString = "";
     if ( !p->mToolBarMiniIcons ) {
         if ( QApplication::desktop()->width() < 480 ) {
             pathString += "icons16/";
             pixWid = 18; pixHei = 16;
         }
     } else {
         pathString += "iconsmini/";
         pixWid = 18; pixHei = 16;
     }
     if ( KOPrefs::instance()->mShowFullMenu ) {
         QMenuBar *menuBar1;
         menuBar1 = menuBar();
         menuBar1->insertItem( i18n("File"), importMenu );
         menuBar1->insertItem( i18n("View"), viewMenu );
         menuBar1->insertItem( i18n("Actions"), actionMenu );
 #ifdef DESKTOP_VERSION
         menuBar1->insertItem( i18n("Synchronize"), syncMenu );
         menuBar1->insertItem( i18n("AgendaSize"),configureAgendaMenu  );
 #else
         menuBar1->insertItem( i18n("Sync"), syncMenu );
         menuBar1->insertItem( i18n("Agenda"),configureAgendaMenu  );
 #endif
         //menuBar1->insertItem( i18n("Toolbar"),configureToolBarMenu );
         menuBar1->insertItem( i18n("Filter"),selectFilterMenu  );
         menuBar1->insertItem( i18n("Help"), helpMenu );
     } else {
         QPEMenuBar *menuBar1;
         menuBar1 = new QPEMenuBar( iconToolBar );
         QPopupMenu *menuBar = new QPopupMenu( this );
         icon = loadPixmap( pathString + "z_menu" );
         menuBar1->insertItem( icon.pixmap(), menuBar);
         //menuBar1->insertItem( i18n("ME"), menuBar);
         menuBar->insertItem( i18n("File"), importMenu );
         menuBar->insertItem( i18n("View"), viewMenu );
         menuBar->insertItem( i18n("Actions"), actionMenu );
         menuBar->insertItem( i18n("Synchronize"), syncMenu );
         menuBar->insertItem( i18n("AgendaSize"),configureAgendaMenu  );
         menuBar->insertItem( i18n("Toolbar"),configureToolBarMenu );
         menuBar->insertItem( i18n("Filter"),selectFilterMenu  );
         menuBar->insertItem( i18n("Help"), helpMenu );
         //menuBar1->setMaximumWidth( menuBar1->sizeHint().width() );
         menuBar1->setMaximumSize( menuBar1->sizeHint( ));
     }
     connect ( selectFilterMenu, SIGNAL( activated ( int )  ), this, SLOT (selectFilter( int ) ) );
     connect ( selectFilterMenu, SIGNAL( aboutToShow() ), this, SLOT (fillFilterMenu() ) );
     mWeekBgColor = iconToolBar->backgroundColor();
     mWeekPixmap.resize( pixWid , pixHei );
     mWeekPixmap.fill( mWeekBgColor );
     icon = mWeekPixmap;
     mWeekAction = new QAction( i18n("Select week number"),icon, i18n("Select week number"), 0, this );
     if ( p-> mShowIconWeekNum )
         mWeekAction->addTo( iconToolBar );
     mWeekFont = font();
 
     int fontPoint = mWeekFont.pointSize();
     QFontMetrics f( mWeekFont );
     int fontWid =  f.width( "30" );
     while ( fontWid > pixWid ) {
         --fontPoint;
         mWeekFont.setPointSize( fontPoint );
         QFontMetrics f( mWeekFont );
         fontWid =  f.width( "30" );
         //qDebug("dec-- ");
     }
 
     connect( mWeekAction, SIGNAL( activated() ),
              this, SLOT( weekAction() ) );
 
     connect( this, SIGNAL( selectWeek ( int ) ), mView->dateNavigator(), SLOT( selectWeek ( int ) ) );
 
     //#endif
     // ******************
     QAction *action;
     // QPopupMenu *configureMenu= new QPopupMenu( menuBar );
     configureToolBarMenu->setCheckable( true );
 
    
     configureAgendaMenu->setCheckable( true );
     int iii ;
     for ( iii = 1;iii<= 10 ;++iii ){
         configureAgendaMenu->insertItem(i18n("Size %1").arg(iii), (iii+1)*2 );
     }
     //configureMenu->insertItem( "AgendaSize",configureAgendaMenu  );
 
     connect( configureAgendaMenu, SIGNAL( aboutToShow()),
              this, SLOT( showConfigureAgenda( ) ) );
 
     icon = loadPixmap( pathString + "configure" );
     action = new QAction( i18n("Configure"),icon, i18n("Configure..."), 0, this );
     action->addTo( actionMenu );
     connect( action, SIGNAL( activated() ),
              mView, SLOT( edit_options() ) );
     actionMenu->insertSeparator();
 
     action = new QAction( i18n("Undo Delete"), i18n("Undo Delete..."), 0, this );
     action->addTo( actionMenu );
     connect( action, SIGNAL( activated() ),
              mView, SLOT( undo_delete() ) );
     actionMenu->insertSeparator();
 
     icon = loadPixmap( pathString + "newevent" );
     configureToolBarMenu->insertItem(i18n("Stretched TB"), 5 );
     configureToolBarMenu->insertItem(i18n("Only one toolbar"), 6 );
     configureToolBarMenu->insertSeparator();
     configureToolBarMenu->insertItem(i18n("Filtermenu"), 7 );
     configureToolBarMenu->insertSeparator();
     configureToolBarMenu->insertItem(i18n("Week Number"), 400);
     configureToolBarMenu->insertItem(icon, i18n("New Event..."), 10 );
     QAction* ne_action = new QAction( i18n("New Event..."), icon, i18n("New Event..."), 0, this );
     ne_action->addTo( actionMenu );
     connect( ne_action, SIGNAL( activated() ),
              mView, SLOT( newEvent() ) );
     icon = loadPixmap( pathString + "newtodo" );
     configureToolBarMenu->insertItem(icon, i18n("New Todo..."), 20 );
     QAction* nt_action = new QAction( i18n("New Todo..."), icon, i18n("New Todo..."), 0, this );
     nt_action->addTo( actionMenu );
     connect( nt_action, SIGNAL( activated() ),
              mView, SLOT( newTodo() ) );
 
     icon = loadPixmap( pathString + "today" );
     QAction* today_action = new QAction( i18n("Go to Today"), icon, i18n("Go to Today"), 0, this );
     today_action->addTo( viewMenu );
     connect( today_action, SIGNAL( activated() ),
              mView, SLOT( goToday() ) );
     viewMenu->insertSeparator();
 
     // ***********************
     if ( KOPrefs::instance()->mVerticalScreen ) {
          icon = SmallIcon( "1updownarrow" );
     } else {
         icon = SmallIcon("1leftrightarrow" );
     }
     configureToolBarMenu->insertItem(icon, i18n("Toggle Fullscreen"), 28 );
     QAction* FSaction = new QAction( i18n("Toggle Fullscreen"), icon, i18n("Toggle Fullscreen"), 0, this );
     FSaction->addTo( viewMenu );
     connect( FSaction, SIGNAL( activated() ), mView, SLOT( toggleExpand() ));
 
     icon = loadPixmap( pathString + "navi" );
     configureToolBarMenu->insertItem(icon, i18n("Toggle DateNavigator"), 22 );
     action = new QAction( i18n("Toggle DateNavigator"), icon, i18n("Toggle DateNavigator"), 0, this );
     action->addTo( viewMenu );
     connect( action, SIGNAL( activated() ),
              mView, SLOT( toggleDateNavigatorWidget() ) );
     mToggleNav = action ;
     icon = loadPixmap( pathString + "filter" );
-    configureToolBarMenu->insertItem(icon, i18n("Toggle FilterView"), 26 );
+    configureToolBarMenu->insertItem(icon, i18n("Filter menu icon"), 26 );
     action = new QAction( i18n("Toggle FilterView"), icon, i18n("Toggle FilterView"), 0, this );
     action->addTo( viewMenu );
     connect( action, SIGNAL( activated() ),
              mView, SLOT( toggleFilter() ) );
     mToggleFilter = action;
     icon = loadPixmap( pathString + "allday" );
     configureToolBarMenu->insertItem(icon, i18n("Toggle Allday"), 24 );
     action = new QAction( i18n("Toggle Allday"), icon,i18n("Toggle Allday"), 0, this );
     action->addTo( viewMenu );
     connect( action, SIGNAL( activated() ),
              mView, SLOT( toggleAllDaySize() ) );
     mToggleAllday = action;
 
 
     connect( mView->viewManager(), SIGNAL( signalFullScreen( bool ) ),
              mToggleNav, SLOT( setEnabled ( bool ) ) );
     connect( mView->viewManager(), SIGNAL( signalFullScreen( bool ) ),
              mToggleFilter, SLOT( setEnabled ( bool ) ) );
     connect( mView->viewManager(), SIGNAL( signalAgendaView( bool ) ),
              mToggleAllday, SLOT( setEnabled ( bool ) ) );
 
     viewMenu->insertSeparator();
     icon = loadPixmap( pathString + "picker" );
     action = new QAction( i18n("Date Picker"), icon, i18n("Date Picker"), 0, this );
     action->addTo( viewMenu );
     connect( action, SIGNAL( activated() ),
              mView, SLOT( showDatePicker() ) );
     action->addTo( iconToolBar  );
     viewMenu->insertSeparator();
 
     if ( p-> mShowIconToggleFull )
         FSaction->addTo( iconToolBar );
     if ( p->mShowIconNavigator ) mToggleNav ->addTo( iconToolBar );
-    if ( p->mShowIconFilterview ) mToggleFilter->addTo( iconToolBar );
+    if ( p->mShowIconFilterview ) {
+        icon = loadPixmap( pathString + "filter" );
+        QPEMenuBar *menuBar111 = new QPEMenuBar( iconToolBar );
+        menuBar111->insertItem( icon.pixmap(), selectFilterMenu);
+        int isi = 24;
+        if ( QApplication::desktop()->width() < 480 )
+            isi = 18;
+        menuBar111->setFixedSize( QSize( isi, isi  )) ;
+    }
+    //********************
     if ( p->mShowIconAllday ) mToggleAllday->addTo( iconToolBar );
 
 
     icon = loadPixmap( pathString + "whatsnext" );
     configureToolBarMenu->insertItem(icon, i18n("What's Next"), 110 );
     QAction* whatsnext_action = new QAction( i18n("What's Next"), icon, i18n("What's Next"), 0, this );
     whatsnext_action->addTo( viewMenu );
     connect( whatsnext_action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( showWhatsNextView() ) );
 
     icon = loadPixmap( pathString + "xdays" );
     configureToolBarMenu->insertItem(icon, i18n("Next days"), 100 );
     QAction* xdays_action = new QAction( i18n("Next days"), icon, i18n("Next days"), 0, this );
     xdays_action->addTo( viewMenu );
     connect( xdays_action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( showNextXView() ) );
    
 
     icon = loadPixmap( pathString + "journal" );
     configureToolBarMenu->insertItem(icon, i18n("Journal"), 90 );
     QAction* viewjournal_action = new QAction( i18n("Journal"), icon, i18n("Journal"), 0, this );
     viewjournal_action->addTo( viewMenu );
     connect( viewjournal_action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( showJournalView() ) );
 
 
     icon = loadPixmap( pathString + "day" );
     configureToolBarMenu->insertItem(icon, i18n("Day View"), 40 );
     QAction* day1_action = new QAction( i18n("Day View"), icon, i18n("Day View"), 0, this );
     day1_action->addTo( viewMenu );
     //  action->addTo( toolBar );
     connect( day1_action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( showDayView() ) );
 
     icon = loadPixmap( pathString + "workweek" );
     configureToolBarMenu->insertItem(icon, i18n("Work Week"), 50 );
     QAction* day5_action = new QAction( i18n("Work Week"), icon, i18n("Work Week"), 0, this );
     day5_action->addTo( viewMenu );
     connect( day5_action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( showWorkWeekView() ) );
 
     icon = loadPixmap( pathString + "week" );
     configureToolBarMenu->insertItem(icon, i18n("Week"), 60 );
     QAction* day7_action = new QAction( i18n("Week"), icon, i18n("Week"), 0, this );
     day7_action->addTo( viewMenu );
     connect( day7_action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( showWeekView() ) );
     
     icon = loadPixmap( pathString + "workweek2" );
     configureToolBarMenu->insertItem(icon, i18n("List week view"), 75 );
     QAction* day6_action = new QAction( i18n("List week"), icon, i18n("List week"), 0, this );
     day6_action->addTo( viewMenu );
     connect( day6_action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( showMonthViewWeek() ) );
 
     icon = loadPixmap( pathString + "month" );
     configureToolBarMenu->insertItem(icon, i18n("Month"), 70 );
     QAction* month_action = new QAction( i18n("Month"), icon, i18n("Month"), 0, this );
     month_action->addTo( viewMenu );
     connect( month_action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( showMonthView() ) );
 
      icon = loadPixmap( pathString + "list" );
     configureToolBarMenu->insertItem(icon, i18n("List View"), 30 );
     QAction* showlist_action = new QAction( i18n("List View"), icon, i18n("List View"), 0, this );
     showlist_action->addTo( viewMenu );
     connect( showlist_action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( showListView() ) );
 
     icon = loadPixmap( pathString + "todo" );
     configureToolBarMenu->insertItem(icon, i18n("Todo View"), 80 );
     QAction* todoview_action = new QAction( i18n("Todo View"), icon, i18n("Todo View"), 0, this );
     todoview_action->addTo( viewMenu );
     connect( todoview_action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( showTodoView() ) );
 
 
 
 #if 0
     action = new QAction( "view_timespan", "Time Span", 0, this );
     action->addTo( viewMenu );
     connect( action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( showTimeSpanView() ) );
 #endif
 
     mNewSubTodoAction = new QAction( "new_subtodo", i18n("New Sub-Todo..."), 0,
                                      this );
     mNewSubTodoAction->addTo( actionMenu );
     connect( mNewSubTodoAction, SIGNAL( activated() ),
              mView, SLOT( newSubTodo() ) );
 
     actionMenu->insertSeparator();
 
     mShowAction = new QAction( "show_incidence", i18n("Show..."), 0, this );
     mShowAction->addTo( actionMenu );
     connect( mShowAction, SIGNAL( activated() ),
              mView, SLOT( showIncidence() ) );
 
     mEditAction = new QAction( "edit_incidence", i18n("Edit..."), 0, this );
     mEditAction->addTo( actionMenu );
     connect( mEditAction, SIGNAL( activated() ),
              mView, SLOT( editIncidence() ) );
 
     mDeleteAction = new QAction( "delete_incidence", i18n("Delete..."), 0, this );
     mDeleteAction->addTo( actionMenu );
     connect( mDeleteAction, SIGNAL( activated() ),
              mView, SLOT( deleteIncidence() ) );
 
 
     mCloneAction = new QAction( "clone_incidence", i18n("Clone..."), 0, this );
     mCloneAction->addTo( actionMenu );
     connect( mCloneAction, SIGNAL( activated() ),
              mView, SLOT( cloneIncidence() ) );
     mMoveAction = new QAction( "Move_incidence", i18n("Move..."), 0, this );
     mMoveAction->addTo( actionMenu );
     connect( mMoveAction, SIGNAL( activated() ),
              mView, SLOT( moveIncidence() ) );
     mBeamAction = new QAction( "Beam_incidence", i18n("Beam..."), 0, this );
     mBeamAction->addTo( actionMenu );
     connect( mBeamAction, SIGNAL( activated() ),
              mView, SLOT( beamIncidence() ) );
     mCancelAction = new QAction( "Cancel_incidence", i18n("Toggle Cancel"), 0, this );
     mCancelAction->addTo( actionMenu );
     connect( mCancelAction, SIGNAL( activated() ),
              mView, SLOT( toggleCancelIncidence() ) );
 
     actionMenu->insertSeparator();
 
     action = new QAction( "purge_completed", i18n("Purge Completed"), 0,
                           this );
     action->addTo( actionMenu );
     connect( action, SIGNAL( activated() ), mView, SLOT( purgeCompleted() ) );
 
     icon = loadPixmap( pathString + "search" );
     QAction* search_action = new QAction( i18n("Search"), icon, i18n("Search..."), 0, this );
     configureToolBarMenu->insertItem(icon, i18n("Search"), 120 , 5);
     search_action->addTo( actionMenu );
     connect( search_action, SIGNAL( activated() ),
              mView->dialogManager(), SLOT( showSearchDialog() ) );
 
     
 
     if ( KOPrefs::instance()->mShowFullMenu ) {
         actionMenu->insertSeparator();
         actionMenu->insertItem( i18n("Configure Toolbar"),configureToolBarMenu );
 
     }
     // actionMenu->insertSeparator();
     action = new QAction( "import_qtopia", i18n("Import (*.ics/*.vcs) file"), 0,
                           this );
     action->addTo( importMenu_X );
     connect( action, SIGNAL( activated() ), SLOT( importIcal() ) );
     action = new QAction( "import_quick", i18n("Import last file"), 0,
                           this );
     action->addTo( importMenu_X );
     connect( action, SIGNAL( activated() ), SLOT( quickImportIcal() ) );
     importMenu_X->insertSeparator();
     action = new QAction( "import_bday", i18n("Import Birthdays (KA/Pi)"), 0,
                           this );
     action->addTo( importMenu_X );
     connect( action, SIGNAL( activated() ), SLOT( importBday() ) );
     //#ifndef DESKTOP_VERSION
     importMenu_X->insertSeparator();
     action = new QAction( "import_qtopia", i18n("Import Opie/Qtopia Cal."), 0,
                           this );
     action->addTo( importMenu_X );
     connect( action, SIGNAL( activated() ), SLOT( importQtopia() ) );
     //#else
 #ifdef _OL_IMPORT_
     importMenu_X->insertSeparator();
     action = new QAction( "import_ol", i18n("Import from OL"), 0,
                           this );
     action->addTo( importMenu_X );
     connect( action, SIGNAL( activated() ), SLOT( importOL() ) );
 #endif
     //#endif
 
     //importMenu->insertSeparator();
     action = new QAction( "load_cal", i18n("Load Calendar Backup"), 0,
                           this );
     action->addTo( importMenu );
     connect( action, SIGNAL( activated() ), SLOT( loadCalendar() ) );
 
     action = new QAction( "save_cal", i18n("Save Calendar Backup"), 0,
                           this );
     action->addTo( importMenu );
     connect( action, SIGNAL( activated() ), SLOT( saveCalendar() ) );
     importMenu->insertSeparator();
     importMenu->insertItem( i18n("Import"), importMenu_X );
     //importMenu->insertSeparator();
     action = new QAction( "import_qtopia", i18n("Export VCalendar"), 0,
                           this );
     action->addTo( exportMenu_X );    
     connect( action, SIGNAL( activated() ), SLOT( exportVCalendar() ) );
 
 
     //LR
     QPopupMenu *ex2phone = new QPopupMenu( this );
     ex2phone->insertItem(i18n("Complete calendar..."), 1 );
     ex2phone->insertItem(i18n("Filtered calendar..."), 2 );
     connect( ex2phone, SIGNAL( activated(int) ), this, SLOT( exportToPhone( int)) );
     exportMenu_X->insertItem( i18n("Export to phone"), ex2phone );
 
     importMenu->insertItem( i18n("Export"), exportMenu_X );
 #ifndef DESKTOP_VERSION
     //importMenu->insertSeparator();
     brAction = new QAction( "beam toggle", i18n("Beam receive enabled"), 0,
                           this );
     brAction->addTo( beamMenu_X ); 
     brAction->setToggleAction (true ) ;
     connect( brAction, SIGNAL( activated() ), this, SLOT( toggleBeamReceive() ) );
 
     action = new QAction( "beam all", i18n("Beam complete calendar..."), 0,
                           this );
     action->addTo( beamMenu_X );
     connect( action, SIGNAL( activated() ), mView, SLOT( beamCalendar() ) );
 
     action = new QAction( "beam all", i18n("Beam filtered calendar..."), 0,
                           this );
     action->addTo( beamMenu_X );
     connect( action, SIGNAL( activated() ), mView, SLOT( beamFilteredCalendar()) );
     importMenu->insertItem( i18n("Beam"), beamMenu_X );
 #else
     //importMenu->insertSeparator();
  icon = loadPixmap( pathString + "print" );
     action = new QAction( i18n("Print calendar..."),icon,i18n("Print calendar..."), 0, this );
     action->addTo( beamMenu_X );
     connect( action, SIGNAL( activated() ),
              this, SLOT( printCal() ) );
 
     icon = loadPixmap( pathString + "print" );
     action = new QAction( i18n("Print agenda selection..."),icon,i18n("Print agenda selection..."), 0, this );
     action->addTo( beamMenu_X );
     connect( action, SIGNAL( activated() ),
              this, SLOT( printSel() ) );  
     action = new QAction( i18n("Print What's Next View..."),icon,i18n("Print What's Next View..."), 0, this );
     action->addTo( beamMenu_X );
     connect( action, SIGNAL( activated() ),
              mView->viewManager(), SLOT( slotprintWNV() ) );
 
     action = new QAction( i18n("Print selected event / todo..."),icon,i18n("Print selected event / todo..."), 0, this );
     action->addTo( beamMenu_X );
     connect( action, SIGNAL( activated() ),
              mView, SLOT( slotprintSelInc() ) );
 
 
     importMenu->insertItem( i18n("Print"), beamMenu_X );
 #endif
     importMenu->insertSeparator();
     action = new QAction( "manage cat", i18n("Manage new categories..."), 0,
                           this );
     action->addTo( importMenu );
     connect( action, SIGNAL( activated() ), mView, SLOT( manageCategories() ) );
     importMenu->insertSeparator();
     action = new QAction( "beam all", i18n("Save"), 0,
                           this );
     action->addTo( importMenu );
     connect( action, SIGNAL( activated() ), this, SLOT( save() ) );
     action = new QAction( "beam all", i18n("Exit (+save)"), 0,
                           this );
     action->addTo( importMenu );
     connect( action, SIGNAL( activated() ), this, SLOT( close() ) );
 
     //menuBar->insertItem( "Configure",configureMenu );
     //configureMenu->insertItem( "Toolbar",configureToolBarMenu  );
     icon = loadPixmap( "korganizer/korganizer" );
 
     action = new QAction( "Whats New", i18n("What's new?"), 0,this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( whatsNew() ) );
     action = new QAction( "featureHowto", i18n("Features + hints..."), 0,this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( features() ) );
     action = new QAction( "Keys + Colors", i18n("Keys + Colors..."), 0, this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( keyBindings() ) );
     action = new QAction( "Sync Howto", i18n("Sync HowTo..."), 0,this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( synchowto() ) );
     action = new QAction( "KDE Sync Howto", i18n("KDE Sync HowTo..."), 0,this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( kdesynchowto() ) );
     action = new QAction( "Multi Sync Howto", i18n("Multi Sync HowTo..."), 0,this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( multisynchowto() ) );
     action = new QAction( "Auto saving", i18n("Auto saving..."), 0, this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( aboutAutoSaving() ) );
     action = new QAction( "Problemd", i18n("Known Problems..."), 0,this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( aboutKnownBugs() ) );
     action = new QAction( "Translate Howto", i18n("User translation..."), 0,this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( usertrans() ) );
     action = new QAction( "Frequently asked questions", i18n("FAQ..."), 0,this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( faq() ) );
     action = new QAction( "licence", i18n("Licence..."), 0, this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( licence() ) );
     action = new QAction( "about", i18n("About..."), 0, this );
     action->addTo( helpMenu );
     connect( action, SIGNAL( activated() ),
              SLOT( about() ) );
     //menuBar->insertSeparator();
 
     // ******************************************************
     // menubar icons
 
 
     
     //menuBar->insertItem( iconToolBar );
     //xdays_action
     if (p-> mShowIconNewEvent)
         ne_action->addTo( iconToolBar  );
     if (p->mShowIconNewTodo )
         nt_action->addTo( iconToolBar  );
     if (p-> mShowIconSearch)
         search_action->addTo( iconToolBar  );
     if (p-> mShowIconWhatsThis)
         QWhatsThis::whatsThisButton (  iconToolBar );
     if (p-> mShowIconNext)
         whatsnext_action->addTo( viewToolBar  );
     if (p-> mShowIconNextDays)
         xdays_action->addTo( viewToolBar  );
     if (p-> mShowIconJournal)
         viewjournal_action->addTo( viewToolBar  );
     if (p-> mShowIconDay1)
         day1_action->addTo( viewToolBar  );
     if (p-> mShowIconDay5)
         day5_action->addTo( viewToolBar  );
     if (p-> mShowIconDay7)
         day7_action->addTo( viewToolBar  );
     if (p-> mShowIconDay6)
         day6_action->addTo( viewToolBar  );
     if (p-> mShowIconMonth)
         month_action->addTo( viewToolBar  ); 
     if (p-> mShowIconList)
         showlist_action->addTo( viewToolBar  );
     if (p-> mShowIconTodoview)
         todoview_action->addTo( viewToolBar  );   
    
     icon = loadPixmap( pathString + "2leftarrowB" );
     configureToolBarMenu->insertItem(icon, i18n("Prev. month"), 200);
     if (p-> mShowIconBackFast) {
         action = new QAction( i18n("Prev. month"), icon, i18n("Prev. month"),0 , this );
         connect( action, SIGNAL( activated() ),
                  mView, SLOT( goPreviousMonth() ) );
         action->addTo( navigatorToolBar  );
     }
     icon = loadPixmap( pathString + "1leftarrowB" );
     configureToolBarMenu->insertItem(icon, i18n("Go backward"), 210);
     if (p-> mShowIconBack) {
         action = new QAction( i18n("Go backward"), icon, i18n("Go backward"),0 , this );
         connect( action, SIGNAL( activated() ),
                  mView, SLOT( goPrevious() ) );
         action->addTo( navigatorToolBar  );
     } 
     icon = loadPixmap( pathString + "today" );
     configureToolBarMenu->insertItem(icon, i18n("Go to Today"), 130);
     if (p-> mShowIconToday)
         today_action->addTo( navigatorToolBar  );
     icon = loadPixmap( pathString + "1rightarrowB" );
     configureToolBarMenu->insertItem(icon, i18n("Go forward"), 220);
     if (p-> mShowIconForward) {
         action = new QAction( i18n("Go forward"), icon, i18n("Go forward"),0 , this );
         connect( action, SIGNAL( activated() ),
                  mView, SLOT( goNext() ) );
         action->addTo( navigatorToolBar  );
     }
     icon = loadPixmap( pathString + "2rightarrowB" );
     configureToolBarMenu->insertItem(icon, i18n("Next month"), 230);
     if (p-> mShowIconForwardFast) {
diff --git a/libkdepim/externalapphandler.cpp b/libkdepim/externalapphandler.cpp
index f8f4c8a..0d66a5a 100644
--- a/libkdepim/externalapphandler.cpp
+++ b/libkdepim/externalapphandler.cpp
@@ -754,451 +754,458 @@ bool ExternalAppHandler::mailToOneContact( const QString& name, const QString& e
 /**************************************************************************
  *
  **************************************************************************/
 
 //calls the emailapplication and creates a mail with parameter as recipients
 // parameters format is
 //  NAME <EMAIL>:SUBJECT
 bool ExternalAppHandler::mailToOneContact( const QString& adressline )
 {
   QString line = adressline;
 
   int first = line.find( "<");
   int last = line.find( ">");
   QString name = line.left(first);
   QString emailadress = line.mid(first+1, last-first-1);
 
   //Subject can not be handled right now.
   return mailToOneContact( name, emailadress );
 
 }
 
 
 /**************************************************************************
  *
  **************************************************************************/
 
 //calls the phoneapplication with the number
 bool ExternalAppHandler::callByPhone( const QString& phonenumber )
 {
 #ifndef DESKTOP_VERSION
   QString channel;
   QString message;
   QString parameters;
 
 
   int client = KPimGlobalPrefs::instance()->mPhoneClient;
   if (client == KPimGlobalPrefs::OTHER_PHC)
   {
     channel = KPimGlobalPrefs::instance()->mPhoneOtherChannel;
     message = KPimGlobalPrefs::instance()->mPhoneOtherMessage;
     parameters = KPimGlobalPrefs::instance()->mPhoneOtherMessageParameters;
   }
   else
   {
     DefaultAppItem* dai = ExternalAppHandler::getDefaultItem(PHONE, client);
     if (!dai)
     {
       qDebug("could not find configured phone application.");
           return false;
     }
     channel = dai->_channel;
     message = dai->_message;
     parameters = dai->_parameters;
   }
 
 
   //first check if one of the mailers need the emails right in the message.
   message = translateMessage(message, phonenumber, "");
 
 
 #ifdef DEBUG_EXT_APP_HANDLER
   qDebug("6Using QCopEnvelope e(\"%s\",\"%s\")", channel.latin1(), message.latin1());
   qDebug("passing phonenumber(%s) as parameter in the form %s to QCopEnvelope", phonenumber.latin1(), parameters.latin1());
 #endif
 
   QCopEnvelope e(channel.latin1(), message.latin1());
     //US we need no names in the To field. The emailadresses are enough
 
   passParameters(&e, parameters, phonenumber, "");
 
 
 #else
   KMessageBox::sorry( 0, i18n( "This version does not support phonecalls." ) );
 #endif
 
 
   return true;
 }
 
 /**************************************************************************
  *
  **************************************************************************/
 
 //calls the smsapplication with the number
 bool ExternalAppHandler::callBySMS( const QString& phonenumber )
 {
 #ifndef DESKTOP_VERSION
   QString channel;
   QString message;
   QString parameters;
 
 
   int client = KPimGlobalPrefs::instance()->mSMSClient;
   if (client == KPimGlobalPrefs::OTHER_SMC)
   {
     channel = KPimGlobalPrefs::instance()->mSMSOtherChannel;
     message = KPimGlobalPrefs::instance()->mSMSOtherMessage;
     parameters = KPimGlobalPrefs::instance()->mSMSOtherMessageParameters;
   }
   else
   {
     DefaultAppItem* dai = ExternalAppHandler::getDefaultItem(SMS, client);
     if (!dai)
     {
       qDebug("could not find configured sms application.");
           return false;
     }
     channel = dai->_channel;
     message = dai->_message;
     parameters = dai->_parameters;
   }
 
 
   //first check if one of the mailers need the emails right in the message.
   message = translateMessage(message, phonenumber, "");
 
 
 #ifdef DEBUG_EXT_APP_HANDLER
   qDebug("7Using QCopEnvelope e(\"%s\",\"%s\")", channel.latin1(), message.latin1());
   qDebug("passing phonenumber(%s) as parameter in the form %s to QCopEnvelope", phonenumber.latin1(), parameters.latin1());
 #endif
 
   QCopEnvelope e(channel.latin1(), message.latin1());
     //US we need no names in the To field. The emailadresses are enough
 
   passParameters(&e, parameters, phonenumber, "");
 
 
 #else
   KMessageBox::sorry( 0, i18n( "This version does not support the sending of sms." ) );
 #endif
 
 
   return true;
 }
 
 /**************************************************************************
  *
  **************************************************************************/
 
 //calls the pagerapplication with the number
 bool ExternalAppHandler::callByPager( const QString& pagernumber )
 {
 #ifndef DESKTOP_VERSION
   QString channel;
   QString message;
   QString parameters;
 
 
   int client = KPimGlobalPrefs::instance()->mPagerClient;
   if (client == KPimGlobalPrefs::OTHER_PAC)
   {
     channel = KPimGlobalPrefs::instance()->mPagerOtherChannel;
     message = KPimGlobalPrefs::instance()->mPagerOtherMessage;
     parameters = KPimGlobalPrefs::instance()->mPagerOtherMessageParameters;
   }
   else
   {
     DefaultAppItem* dai = ExternalAppHandler::getDefaultItem(PAGER, client);
     if (!dai)
     {
       qDebug("could not find configured pager application.");
           return false;
     }
     channel = dai->_channel;
     message = dai->_message;
     parameters = dai->_parameters;
   }
 
 
   //first check if one of the mailers need the emails right in the message.
   message = translateMessage(message, pagernumber, "");
 
 
 #ifdef DEBUG_EXT_APP_HANDLER
   qDebug("8Using QCopEnvelope e(\"%s\",\"%s\")", channel.latin1(), message.latin1());
   qDebug("passing pagernumber(%s) as parameter in the form %s to QCopEnvelope", pagernumber.latin1(), parameters.latin1());
 #endif
 
   QCopEnvelope e(channel.latin1(), message.latin1());
     //US we need no names in the To field. The emailadresses are enough
 
   passParameters(&e, parameters, pagernumber, "");
 
 
 #else
   KMessageBox::sorry( 0, i18n( "This version does not support paging." ) );
 #endif
 
 
   return true;
 }
 
 /**************************************************************************
  *
  **************************************************************************/
 
 //calls the faxapplication with the number
 bool ExternalAppHandler::callByFax( const QString& faxnumber )
 {
 #ifndef DESKTOP_VERSION
   QString channel;
   QString message;
   QString parameters;
 
 
   int client = KPimGlobalPrefs::instance()->mFaxClient;
   if (client == KPimGlobalPrefs::OTHER_FAC)
   {
     channel = KPimGlobalPrefs::instance()->mFaxOtherChannel;
     message = KPimGlobalPrefs::instance()->mFaxOtherMessage;
     parameters = KPimGlobalPrefs::instance()->mFaxOtherMessageParameters;
   }
   else
   {
     DefaultAppItem* dai = ExternalAppHandler::getDefaultItem(FAX, client);
     if (!dai)
     {
       qDebug("could not find configured fax application.");
           return false;
     }
     channel = dai->_channel;
     message = dai->_message;
     parameters = dai->_parameters;
   }
 
 
   //first check if one of the mailers need the emails right in the message.
   message = translateMessage(message, faxnumber, "");
 
 
 #ifdef DEBUG_EXT_APP_HANDLER
   qDebug("9Using QCopEnvelope e(\"%s\",\"%s\")", channel.latin1(), message.latin1());
   qDebug("passing faxnumber(%s) as parameter in the form %s to QCopEnvelope", faxnumber.latin1(), parameters.latin1());
 #endif
 
   QCopEnvelope e(channel.latin1(), message.latin1());
     //US we need no names in the To field. The emailadresses are enough
 
   passParameters(&e, parameters, faxnumber, "");
 
 
 #else
   KMessageBox::sorry( 0, i18n( "This version does not support the sending of faxes." ) );
 #endif
 
 
   return true;
 }
 
 /**************************************************************************
  *
  **************************************************************************/
 
 //calls the sipapplication with the number
 bool ExternalAppHandler::callBySIP( const QString& sipnumber )
 {
 #ifndef DESKTOP_VERSION
   QString channel;
   QString message;
   QString parameters;
 
 
   int client = KPimGlobalPrefs::instance()->mSipClient;
   if (client == KPimGlobalPrefs::OTHER_SIC)
   {
     channel = KPimGlobalPrefs::instance()->mSipOtherChannel;
     message = KPimGlobalPrefs::instance()->mSipOtherMessage;
     parameters = KPimGlobalPrefs::instance()->mSipOtherMessageParameters;
   }
   else
   {
     DefaultAppItem* dai = ExternalAppHandler::getDefaultItem(SIP, client);
     if (!dai)
     {
       qDebug("could not find configured sip application.");
           return false;
     }
     channel = dai->_channel;
     message = dai->_message;
     parameters = dai->_parameters;
   }
 
 
   //first check if one of the sip apps need the emails right in the message.
   message = translateMessage(message, sipnumber, "");
 
 
 #ifdef DEBUG_EXT_APP_HANDLER
   qDebug("10Using QCopEnvelope e(\"%s\",\"%s\")", channel.latin1(), message.latin1());
   qDebug("passing sipnumber(%s) as parameter in the form %s to QCopEnvelope", sipnumber.latin1(), parameters.latin1());
 #endif
 
   QCopEnvelope e(channel.latin1(), message.latin1());
     //US we need no names in the To field. The emailadresses are enough
 
   passParameters(&e, parameters, sipnumber, "");
 
 
 #else
   KMessageBox::sorry( 0, i18n( "This version does not support sip." ) );
 #endif
 
 
   return true;
 }
 
 
 /**************************************************************************
  *
  **************************************************************************/
 
 
 QString& ExternalAppHandler::translateMessage(QString& message, const QString& param1, const QString& param2 ) const
 {
   message = message.replace( QRegExp("%1"), param1 );
   return message.replace( QRegExp("%2"), param2 );
 }
 
 /**************************************************************************
  *
  **************************************************************************/
 
 void ExternalAppHandler::passParameters(QCopEnvelope* e, const QString& parameters, const QString& param1 , const QString& param2) const
 {
 #ifndef DESKTOP_VERSION
   QMap<QString, QString> valmap;
   bool useValMap = false;
 
   // first extract all parts of the parameters.
   QStringList paramlist = QStringList::split(";", parameters);
 
   //Now check how many parts we have.
   //=0 :no params to pass
   //>0 :parameters to pass
   for ( QStringList::Iterator it = paramlist.begin(); it != paramlist.end(); ++it )
   {
     QString param = (*it);
     QStringList keyvallist = QStringList::split("=", param);
 
     //if we have keyvalue pairs, we assume that we pass a map to the envelope
     QStringList::Iterator it2 = keyvallist.begin();
     QString key = (*it2);
     key = key.replace( QRegExp("%1"), param1 );
     key = key.replace( QRegExp("%2"), param2 );
     ++it2;
 
     if(it2 != keyvallist.end())
     {
       QString value = (*it2);
       value = value.replace( QRegExp("%1"), param1 );
       value = value.replace( QRegExp("%2"), param2 );
 
           valmap.insert(key, value);
           useValMap = true;
     }
     else
     {
       //      qDebug("pass parameter << %s", key.latin1());
       (*e) << key;
     }
   }
 
   if (useValMap == true)
     (*e) << valmap;
 
 #endif
 
 }
 
 
 
 /**************************************************************************
  *
  **************************************************************************/
 
 void ExternalAppHandler::appMessage( const QCString& cmsg, const QByteArray& data )
 {
 
     if ( cmsg == "nextView()" ) {
         qDebug("nextView()");
         emit nextView();
         return;
     }
-        
+    if ( cmsg == "callContactdialog()" ) {
+        qDebug("callContactdialog()");
+        emit callContactdialog();
+        return;
+    }
+    
   bool res = mNameEmailUidListFromKAPITransfer->appMessage( cmsg, data );
   if (!res)
     res = mBirthdayListFromKAPITransfer->appMessage( cmsg, data );
 
   if (!res)
     res = mDisplayDetails->appMessage( cmsg, data );
 
 //  if (!res)
 //    res = mNameEmailUidListFromKAPITransfer->appMessage( cmsg, data );
 }
 
 
 
 bool ExternalAppHandler::requestNameEmailUidListFromKAPI(const QString& sourceChannel, const QString& sessionuid)
 {
   mNameEmailUidListFromKAPITransfer->setSourceChannel(sourceChannel);
   // maybe we are sending to KA/Pi fom a different worldd...
   // it may be that the QAplication::desktop()->width() values in KA/Pi are not the same as in our application
   // for that reason we send the current QApplication::desktop()->width() to KA/Pi
+  //qDebug("UID %s ", sessionuid.latin1());
   return mNameEmailUidListFromKAPITransfer->sendMessageToTarget(QString::number ( QApplication::desktop()->width() ));
+  //return mNameEmailUidListFromKAPITransfer->sendMessageToTarget(sessionuid);
 }
 
 bool ExternalAppHandler::returnNameEmailUidListFromKAPI(const QString& sourceChannel, const QString& sessionuid, const QStringList& list1, const QStringList& list2, const QStringList& list3)
 {
   QStringList list4, list5, list6;
 
   mNameEmailUidListFromKAPITransfer->setSourceChannel(sourceChannel);
   return mNameEmailUidListFromKAPITransfer->sendMessageToSource(sessionuid, list1, list2, list3, list4, list5, list6);
 }
 
 bool ExternalAppHandler::requestFindByEmailFromKAPI(const QString& sourceChannel, const QString& sessionuid, const QString& email)
 {
   mFindByEmailFromKAPITransfer->setSourceChannel(sourceChannel);
   return mFindByEmailFromKAPITransfer->sendMessageToTarget(sessionuid, email);
 }
 
 bool ExternalAppHandler::returnFindByEmailFromKAPI(const QString& sourceChannel, const QString& sessionuid, const QStringList& list1, const QStringList& list2, const QStringList& list3)
 {
   QStringList list4, list5, list6;
 
   mFindByEmailFromKAPITransfer->setSourceChannel(sourceChannel);
   return mFindByEmailFromKAPITransfer->sendMessageToSource(sessionuid, list1, list2, list3, list4, list5, list6);
 }
 
 bool ExternalAppHandler::requestDetailsFromKAPI(const QString& name, const QString& email, const QString& uid)
 {
   mDisplayDetails->setSourceChannel("");
   return mDisplayDetails->sendMessageToTarget("", name, email, uid);
 }
 
 bool ExternalAppHandler::requestBirthdayListFromKAPI(const QString& sourceChannel, const QString& sessionuid)
 {
   mBirthdayListFromKAPITransfer->setSourceChannel(sourceChannel);
   return mBirthdayListFromKAPITransfer->sendMessageToTarget(sessionuid);
 }
 
 bool ExternalAppHandler::returnBirthdayListFromKAPI(const QString& sourceChannel, const QString& sessionuid, const QStringList& list1, const QStringList& list2, const QStringList& list3, const QStringList& list4, const QStringList& list5, const QStringList& list6)
 {
   mBirthdayListFromKAPITransfer->setSourceChannel(sourceChannel);
   return mBirthdayListFromKAPITransfer->sendMessageToSource(sessionuid, list1, list2, list3, list4, list5, list6);
 }
 
 
 
 
 
diff --git a/libkdepim/externalapphandler.h b/libkdepim/externalapphandler.h
index 52a64e1..097f306 100644
--- a/libkdepim/externalapphandler.h
+++ b/libkdepim/externalapphandler.h
@@ -1,292 +1,293 @@
 /*
     This file is part of libkdepim.
     Copyright (c) 2004 Ulf Schenk
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     As a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 
 /*
 Enhanced Version of the file for platform independent KDE tools.
 Copyright (c) 2004 Ulf Schenk
 
 $Id$
 */
 
 #ifndef EXTERNALAPPHANDLER_H
 #define EXTERNALAPPHANDLER_H
 
 #include <qobject.h>
 #include <qlist.h>
 #include <qmap.h>
 
 class QCopEnvelope;
 
 
 class ExternalAppHandler;
 class QCopTransferItem  : public QObject
 {
   Q_OBJECT
   public:
     QCopTransferItem(int usedSourceParameters, const QString& sourceMessage, const QString& targetChannel, const QString& targetMessage);
         QCopTransferItem();
 
     bool sendMessageToTarget(const QString& uid, const QString& param1 = QString::null, const QString& param2 = QString::null, const QString& param3 = QString::null);
 
     void setSourceChannel(const QString& sourceChannel);
 
     virtual bool appMessage( const QCString& msg, const QByteArray& data );
 
 
  signals:
     void receivedMessageFromSource(const QString& sourceChannel, const QString& uid);
     void receivedMessageFromSource(const QString& sourceChannel, const QString& uid, const QString& param1);
     void receivedMessageFromSource(const QString& sourceChannel, const QString& uid, const QString& param1, const QString& param2);
     void receivedMessageFromSource(const QString& sourceChannel, const QString& uid, const QString& param1, const QString& param2, const QString& param3);
 
   public:
     int _usedSourceParameters;
     QString _sourceChannel;
     QString _sourceMessage;
     QString _sourceMessageParameters;
     QString _targetChannel;
     QString _targetMessage;
     QString _targetMessageParameters;
 
 };
 
 /*********************************************************************************
  *
  ********************************************************************************/
 
 class QCopMapTransferItem : public QCopTransferItem
 {
   Q_OBJECT
   public:
     QCopMapTransferItem(int usedSourceParameters, const QString& sourceMessage, const QString& targetChannel, const QString& targetMessage);
 
     bool sendMessageToSource(const QString& uid, const QMap<QString,QString>& nameEmailMap);
 
 
     virtual bool appMessage( const QCString& msg, const QByteArray& data );
 
 
  signals:
     void receivedMessageFromTarget(const QString& uid, const QMap<QString,QString>& nameEmailMap);
 
 };
 
 /*********************************************************************************
  *
  ********************************************************************************/
 
 class QCopListTransferItem : public QCopTransferItem
 {
   Q_OBJECT
   public:
     QCopListTransferItem(int usedSourceParameters, const QString& sourceMessage, const QString& targetChannel, const QString& targetMessage);
     ~QCopListTransferItem();
     bool sendMessageToSource(const QString& uid, const QStringList& list1, const QStringList& list2, const QStringList& list3, const QStringList& list4, const QStringList& list5,  const QStringList& list6);
 
 
     virtual bool appMessage( const QCString& msg, const QByteArray& data );
 
 
  signals:
     void receivedMessageFromTarget(const QString& uid, const QStringList& list1, const QStringList& list2, const QStringList& list3, const QStringList& list4 , const QStringList& list5,  const QStringList& list6);
 
 };
 
 /*********************************************************************************
  *
  ********************************************************************************/
 
 
 class DefaultAppItem
 {
   public:
     DefaultAppItem(int type, int id, const QString& label,  const QString& channel, const QString& message, const QString& parameters, const QString& message2, const QString& parameters2)
       : _type(type), _id(id), _label(label), _channel(channel), _message(message), _parameters(parameters), _message2(message2), _parameters2(parameters2)
               {}
 
         DefaultAppItem()
         {  }
 
   public:
     int _type;
     int _id;
     QString _label;
     QString _channel;
     QString _message;
             QString _parameters;// a list of parameters in stringrepresentation. Delimiter is ;
     QString _message2;
     QString _parameters2;  // a list of parameters in stringrepresentation. Delimiter is ;
 
 };
 
 /*********************************************************************************
  *
  ********************************************************************************/
 
 class ExternalAppHandler : public QObject
 {
   Q_OBJECT
   public:
     virtual ~ExternalAppHandler();
 
     static ExternalAppHandler *instance();
 
     enum Types {
                 EMAIL = 0,
                 PHONE = 1,
                 SMS   = 2,
                 FAX   = 3,
                 PAGER = 4,
                 SIP   = 5
         };
 
     enum Availability {
                 UNDEFINED = -1,
                 UNAVAILABLE   = 0,
                 AVAILABLE = 1
         };
 
     //calls the emailapplication with a number of attachments that need to be send.
     //either parameter can be left empty.
     bool mailToMultipleContacts( const QString& recipients, const QString& attachmenturls );
 
     //calls the emailapplication and creates a mail with parameter emailadress as recipients
     bool mailToOneContact( const QString& name, const QString& emailadress );
 
     //calls the emailapplication and creates a mail with parameter as recipients
     // parameters format is
     //  NAME <EMAIL>:SUBJECT
     bool mailToOneContact( const QString& adressline );
 
     //calls the phoneapplication with the number
     bool callByPhone( const QString& phonenumber );
 
     //calls the smsapplication with the number
     bool callBySMS( const QString& phonenumber );
 
     //calls the pagerapplication with the number
     bool callByPager( const QString& pagernumber );
 
     //calls the faxapplication with the number
     bool callByFax( const QString& faxnumber );
 
     //calls the sipapplication with the number
     bool callBySIP( const QString& sipnumber );
 
     bool isEmailAppAvailable();
     bool isSMSAppAvailable();
     bool isPhoneAppAvailable();
     bool isFaxAppAvailable();
     bool isPagerAppAvailable();
     bool isSIPAppAvailable();
 
 
     //Call this method on the source when you want to select names from the addressbook by using QCop
     bool requestNameEmailUidListFromKAPI(const QString& sourceChannel, const QString& sessionuid);
     //Call this method on the target when you want to return the name/email map to the source (client).
     bool returnNameEmailUidListFromKAPI(const QString& sourceChannel, const QString& sessionuid, const QStringList& name, const QStringList& email, const QStringList& uid);
 
 
 
     bool requestFindByEmailFromKAPI(const QString& sourceChannel, const QString& sessionuid, const QString& email);
     bool returnFindByEmailFromKAPI(const QString& sourceChannel, const QString& sessionuid, const QStringList& name, const QStringList& email, const QStringList& uid);
 
     bool requestDetailsFromKAPI(const QString& name, const QString& email, const QString& uid);
 
 
 
     bool requestBirthdayListFromKAPI(const QString& sourceChannel, const QString& sessionuid);
     bool returnBirthdayListFromKAPI(const QString& sourceChannel, const QString& sessionuid,
                                     const QStringList& birthdayList, const QStringList& anniversaryList,
                                     const QStringList& realNameList, const QStringList& emailList,
                                     const QStringList& assembledNameList, const QStringList& uidList);
 
 
     //loadConfig clears the cache and checks again if the applications are available or not
     void loadConfig();
 
     QList<DefaultAppItem> getAvailableDefaultItems(Types);
     DefaultAppItem* getDefaultItem(Types, int);
 
  public  slots:
     void appMessage( const QCString& msg, const QByteArray& data );
 
 
  signals:
+    void callContactdialog();
     void nextView();
     // Emmitted when the target app receives a request from the source app
     void requestForNameEmailUidList(const QString& sourceChannel, const QString& uid);
 
     // Emitted when the source app recieves a list of name/email pairs (=addresses) from another target app. Usually Ka/Pi
     // The first parameter is a uniqueid. It can be used to identify the event
     void receivedNameEmailUidListEvent(const QString& uid, const QStringList& nameList, const QStringList& emailList, const QStringList& uidList);
 
     void requestFindByEmail(const QString& sourceChannel, const QString& uid, const QString& email);
     void receivedFindByEmailEvent(const QString& uid, const QStringList& nameList, const QStringList& emailList, const QStringList& uidList);
 
     void requestForDetails(const QString& sourceChannel, const QString& sessionuid, const QString& name, const QString& email, const QString& uid);
 
 
     // Emmitted when the target app receives a request from the source app
     void requestForBirthdayList(const QString& sourceChannel, const QString& uid);
 
     // Emitted when the source app recieves a list of name/email pairs (=addresses) from another target app. Usually Ka/Pi
     // The first parameter is a uniqueid. It can be used to identify the event
     void receivedBirthdayListEvent(const QString& uid, const QStringList& birthdayList,
                                    const QStringList& anniversaryList, const QStringList& realNameList,
                                    const QStringList& emailList, const QStringList& assembledNameList,
                                    const QStringList& uidList);
 
 
   private:
     ExternalAppHandler();
     QList<DefaultAppItem> mDefaultItems;
 
     Availability mEmailAppAvailable;
     Availability mPhoneAppAvailable;
     Availability mFaxAppAvailable;
     Availability mSMSAppAvailable;
     Availability mPagerAppAvailable;
     Availability mSIPAppAvailable;
 
     QCopListTransferItem* mNameEmailUidListFromKAPITransfer;
     QCopListTransferItem* mFindByEmailFromKAPITransfer;
     QCopTransferItem* mDisplayDetails;
     QCopListTransferItem* mBirthdayListFromKAPITransfer;
 
 
     void addDefaultAppItem(Types type, int id, const QString& label,  const QString& channel, const QString& message, const QString& parameters, const QString& message2, const QString& parameters2);
 
     QString& translateMessage(QString& message, const QString& param1, const QString& param2) const;
         void passParameters(QCopEnvelope* e, const QString& parameters, const QString& param1, const QString& param2) const;
 
 
     static ExternalAppHandler *sInstance;
 
   private slots:
     void receivedNameEmailUidList_Slot(const QString& uid, const QStringList& nameList, const QStringList& emailList, const QStringList& uidList, const QStringList&, const QStringList&, const QStringList& );
 
 };
 
 
 #endif