5 files changed, 27 insertions, 5 deletions

diff --git a/bin/kdepim/kaddressbook/germantranslation.txt b/bin/kdepim/kaddressbook/germantranslation.txt
index 9532759..e874b85 100644
--- a/bin/kdepim/kaddressbook/germantranslation.txt
+++ b/bin/kdepim/kaddressbook/germantranslation.txt
@@ -714,101 +714,102 @@
 { "Trying to connect to remote...","Versuche mit Gegenstelle zu verbinden..." },

 { "Connection to remote\nhost timed out!\nDid you forgot to enable\nsyncing on remote host?","Verbindungsversuch wegen\nZeitüberschreitung gescheitert!\nWurde vergessen Pi-Sync auf\nder Gegenstelle anzuschalten?" },

 { "ERROR: Receiving remote file failed.","FEHLER: Empfang der entfernten Daten fehlgeschlagen." },

 { "Error","Fehler" },

 { ""You entered an invalid date!\n Date changed  to current date.","Ungültiges Datum eingegeben.\nSetze heutiges Datum." },

 { "You entered an invalid date!\n Will use current date instead.","Ungültiges Datum eingegeben.\nSetze stattdessen heutiges Datum." },

 { "Warning","Warnung" },

 { "Select week number","Wähle Wochen Nummer" },

 { "Februar","Februar" },

 { "Pi-Sync options for device: ","Pi-Sync Einstellungen für Gerät: " },

 { "Password for remote access:","Passwort für fernen Zugriff:" },

 { "Remote IP address:","Ferne IP Adresse:" },

 { "Remote port number:","Ferne Port Nummer:" },

 { "Remote file saved to temp file.","Ferne Daten in temp Datei gespeichert." },

 { "Remote from: ","Fern von: " },

 { "Local from: ","Lokal von: " },

 { "Synchronization summary:\n\n %d items added to local\n %d items added to remote\n %d items updated on local\n %d items updated on remote\n %d items deleted on local\n %d items deleted on remote\n %d incoming filtered out\n %d outgoing filtered out\n","Synchronisationsübersicht:\n\n %d lokal hinzugefügt\n %d fern hinzugefügt\n %d lokal geändert\n %d fern geändert\n %d lokal gelöscht\n %d fern gelöscht\n %d eingehende ausgefiltert\n %d ausgehende ausgefiltert\n" },

 { "Local calendar changed!\n","Lokaler Kalender geändert!\n" },

 { "Write back","Schreibe zurück" },

 { "Pi-Sync succesful!","Pi-Sync erfolgreich!" },

 { "Received sync request","Sync Anfrage erhalten" },

 { "Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog.","Ferne Synchronisation ...\n\nBenutze diese Anwendung nicht!\n\nWenn das Syncen fehlschlägt kann\ndieser Dialog geschlossen werden." },

 { "Saving Data to temp file ...","Speichere Daten in temp Datei..." },

 { "Data saved to temp file!","Daten in temp Datei gespeichert!" },

 { "Sending file...","Sende Datei..." },

 { "Waiting for synced file...","Warte auf gesyncte Daten..." },

 { "Receiving synced file...","Gesyncte Daten erhalten..." },

 { "Received %1 bytes","%1 Bytes erhalten" },

 { "Writing file to disk...","Speichere Datei..." },

 { "Pi-Sync successful!","Pi-Sync erfolgreich!" },

 { "Clock skew of\nsyncing devices\nis %1 seconds!","Uhrzeitunterschied der\nsyncenden Geräte\nist %1 Sekunden!" },

 { "Synchronize!","Synchronisiere!" },

 { "High clock skew!","Großer Uhrzeitunterschied!" },

 { "ADJUST\nYOUR\nCLOCKS!","JUSTIERE\nDIE\nUHREN!" },

 { "The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!","Die Uhren der syncenden Geräte\nhaben einen Unterschied von\nmehr als 5 Minuten. Bitte die\nUhrzeiten anpassen. Sie können\nfalsche Sync-Resultate erhalten!\nBitte das Syncen bestätigen!" },

 { "Change search field enable jump bar","Ändere Suchfeld um Jumpbar anzuzeigen" },

 { "Search with '*' prefix (wildcard)","Suche mit '*' Prefix (Wildcard)" },

 { "Shrink searchfield in portrait view","Verkleinere Suchfeld im Portraitmodus" },

 { "Edit new contact","Bearbeite neuen Kontakt" },

 { "Edit ","Bearbeite " },

 { "No contact changed!","Kein Kontakt verändert" },

 { "%1 contacts changed!","%1 Kontakte geändert!" },

 { "Mobile (home)","Handy (Arbeit)" },

 { "Mobile (work)","Handy (Privat)" },

 { "Def.Formatted Name","Def. Format. Name" },

 { "Colors","Farben" },

 { "Alternating background of list views","Abwechselnder Hintergrund für Listen" },

 { "Backup enabled","Backup angeschaltet" },

 { "Use standard backup dir","Standard Backupverzeichnis" },

 { "Number of Backups:","Anzahl der Backups" },

 { "Make backup every ","Mache ein Backup alle " },

 { " days"," Tage" },

 { "Creating backup ... please wait ...","Erzeuge Backup ... bitte warten ..." },

 { "Backup Failed!","Backup Problem!" },

 { "Try again now","Versuche jetzt nochmal" },

 { "Try again later","Versuche später nochmal" },

 { "Try again tomorrow","Versuche morgen nochmal" },

 { "Disable backup","Schalte Backup ab" },

 { "<b>Backup directory does not exist: </b>","<b>Backup Verzeichnis existiert nicht: </b>" },

 { "<b>The backup copy command failed!</b>","<b>Das Backup Kopierkommando is fehlgeschlagen!</b>" },

 { "Choose action","Wähle Aktion" }, 

 { "&Configure KA/Pi...","Konfiguriere KA/Pi..." },

 { "Global Settings...","Globale Einstellungen..." },

 { "Spouse","Ehegatte" },

 { "Notes","Notizen" },

 { "Messanger","Messanger" },

 { "Assistant","Assistent" },

 { "Manager","Manager" },

 { "Secrecy","Sichtbar" },

 { "male","männlich" },

 { "female","weiblich" },

 { "Hide!","Verbergen!" },

 { "Show!","Anzeigen!" },

 { "Details","Details" },

 { "Search:","Suche:" },

 { "Automatically sync with KDE-Desktop\nwhen receiving sync request","Synce automatisch mit KDE-Desktop\nwenn eine Sync-Anforderung kommt" },

 { "Pi-Sync Port Error","Pi-Sync Port Fehler" },

 { "<b>Enabling Pi-Sync failed!</b> Failed to bind or listen to the port %1! Is another instance already listening to that port?","<b>Anschalten von Pi-Sync fehlgeschlagen!</b> Fehler beim Ansprechen des Ports %1! Ist bereits eine andere Anwendung dabei diesen Port zu nutzen?" },

 { "No valid port number:\n%1","Keine gültige Port Nummer:\n%1" },

 { "Port number (Default: %1)\nValid range from 1 to 65535","Port Nummer (Standard: %1)\nGültiger Bereich von 1 bis 65535" },

 { "Pi-Sync Error","Pi-Sync Fehler" },

 { "Got send file request\nwith invalid password","Erhielt "sende Datei" Anfrage\nmit ungültigem Passwort" },

 { "Got receive file request\nwith invalid password","Erhielt "empfange Datei" Anfrage\nmit ungültigem Passwort" },

 { "Wrong password: Receiving remote file failed.","Falsches Passwort: Empfangen von entfernter Datei fehlgeschlagen." },

 { "Please close error dialog on remote.","Bitte schließe Fehler-Dialog am entfernten Rechner" },

 { "Unknown error on remote.","Unbekannter Fehler am entfernten Rechner" },

 { "Pi-Sync: Connected!","Pi-Sync: Verbunden!" },

 { "Receiving file from remote...","Empfange entfernte Datei..." },

 { "Sending back synced file...","Sende synchronisierte Datei zurück..." },

 { "Do you want to\nclear all sync info\nof all profiles?","Möchten Sie wirklich\ndie Sync-Info\nfür alle Profile\nlöschen?" },

 { "Do you want to\nclear the sync\ninfo of profile\n%1?\n","Möchten Sie wirklich\ndie Sync-Info für Profil\n%1?\nlöschen" },

 { "Sorry, no valid port.Syncing cancelled.","Sorry, kein gültiger Port. Syncing abgebrochen." },

 { "Remote port number:\n(May be: 1 - 65535)","Ferne Port Nummer:\n(Darf sein: 1 - 65535)" },

 { "Writing back file ...","Schreibe Datei zurück..." },

 { "Sending back file ...","Sende Datei zurück..." },

 { "Eeek, there I am ticklish!","Huch, da bin ich kitzlig!" },

+{ "Save using LOCAL storage","Speichere nutze LOCAL Pfad" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },
\ No newline at end of file
diff --git a/bin/kdepim/korganizer/germantranslation.txt b/bin/kdepim/korganizer/germantranslation.txt
index e699fe9..f3f5333 100644
--- a/bin/kdepim/korganizer/germantranslation.txt
+++ b/bin/kdepim/korganizer/germantranslation.txt
@@ -1437,107 +1437,107 @@
 { "Manager","Manager" },
 { "Secrecy","Sichtbar" },
 { "male","männlich" },
 { "female","weiblich" },
 { "Hide!","Verbergen!" },
 { "Show!","Anzeigen!" },
 { "Details","Details" },
 { "Profession","Beruf" },
 { "Children","Kinder" },
 { "Department","Abteilung" },
 { "Backup cancelled","Backup abgebrochen" },
 { "Backup globally disabled","Backup global abgeschaltet" },
 { "Backup succesfully finished","Backup erfolgreich beendet" },
 { "(Hint: You can enable automatic backup in the global settings!)","(Hinweis: Sie können ein automatisches Backup in den globalen Einstellungen konfigurieren!)" },
 { "This will <b>backup all calendar files</b> to the directory %1 %2","Das schreibt ein <b>Backup aller Kalenderdateien</b> in das Verzeichnis %1 %2" },
 { "Birthdays","Geburtstage" },
 { "KO/Pi import information!","KO/Pi Import Information!" },
 { "Start this todo\nand stop all running","Starte dieses Todo\nund stoppe alle Laufenden" },
 { "Cancel - do not start"," Abbrechen - Todo nicht starten" }, 
 { "The timezone has changed!\nShould the calendar be reloaded\nto shift the time of the events?\nPlease read Menu: Help->FAQ:\n"How do I change the timezone?"\nas well!","Die Zeitzone wurde geändert!\nSollen die Kalender neu geladen\nwerden num die Zeiten\nder Termine zu ändern?\nBitte lesen Sie auch\nMenu: Help->FAQ:\n"How do I change the timezone?"" },
 { "Reload","Neu laden" },
 { "Timezone settings","Zeitzoneneinstellung" },
 { "Title: ","Titel: " },
 { "Journal from: ","Journal vom: " },
 { "Journal: %1 from ","Journal: %1 vom " },
 { "<b>Click here to edit categories: </b>","<b>Klicke hier um Kategorien zu ändern: </b>" },
 { "Selected Item","Ausgewähltes Item" },
 { "Select Date...","Wähle Datum..." },
 { "After importing/loading/syncing there may be new categories in events or todos which are not added automatically to the category list. Please choose what to do <b>now</b>:","Nach dem Importieren/Laden/Syncen kann es neue Kategorien in den Terminen oder Todos geben, die nicht automatisch der Kategorieliste hinzugefügt werden. Bitte wählen Sie, was <b>jetzt</b> passieren soll:" },
 { "Change category list now!","Ändere Kategorieliste jetzt!" },
 { "Edit category list...","Ändere Kategorieliste..." },
 { "Toolbar changes needs a restart!","Neustart benötigt für Toolbaränderungen!" },
 { "Filepath: ","Dateipfad: " },
 { "You can try to reload the calendar in the Resource View!","In der Resourcenansicht können Sie erneut versuchen den Kalender zu laden!" },
 { "<b>WARNING:</b> There is a pending suspended alarm!","<b>WARNUNG:</b> Es gibt einen laufenden Suspendalarm!" },
 { "Pending Suspend Alarm","Laufender Suspend Alarm" },
 { "Error loading calendar %1","Fehler beim Laden von Kalender %1" },
 { "Calendar(s) not loaded:","Nicht geladene(r) Kalender:" },
 { "Loding of calendar(s) failed","Laden von Kalendern fehlgeschlagen" },
 { "Alarm Options","Alarm Einstellungen" },
 { "Delete selected...","Lösche Ausgewählte..." },
 { "None","Nichts" },
 { "Selection","Auswahl" },
 { "Set categories","Setze Kategorien" },
 { "This adds the selected\nitems to the calendar\n%1\nand removes them from\ntheir current calendar!","Das fügt die ausgewählten\nEinträge dem Kalender\n%1\nhinzu und entfernt sie von\nihrem aktuellen Kalender!" },
 { "Reset","Neu setzen" },
 { "Do you want to <b>add</b> categories to the selected items or <b>reset</b> the list (i.e. remove current categories)?","Möchten Sie Kategorien zu den ausgewählten Einträgen <b>hinzufügen</b> oder die Liste <b>neu setzen</b> (d.h. vorhandene Kategorien löschen)?" },
 { "The file\n%1\ndoes not exist!\nShall I create it for you?","Die Datei\n%1\nexistiert nicht!\nSoll sie neu angelegt werden?" },
 { "Sorry, cannot create the file\n%1!\nNo calendar added!","Kann leider die Datei\n%1\nnicht anlegen!\nKein Kalender hinzugefügt!" },
 { "\nNO\n WRITEABLE\n   CALENDAR\n      FOUND!\n\nPlease fix your calendar settings!\n","\nKEIN\n  SCHREIBBARER\n    KALENDER\n      GEFUNDEN!\n\nBitte korrigieren Sie\nihre Kalendereinstellungen!\n" },
 { "\nThe file\n%1\non disk has changed!\nFile size: %2 bytes.\nLast modified: %3\nDo you want to:\n\n - Save and overwrite file?\n - Sync with file, then save?\n - Cancel without saving? \n","\nDie Datei\n%1\nwurde verändert!\nDatei Grösse: %2 Bytes.\nZuletzt geändert: %3\nMöchten Sie:\n\n - Speichern und die Datei überschreiben?\n - Mit Datei Synchronisieren, dann speichern?\n - Abbrechen ohne zu speichern? \n" },
 { "Edit","Edit" },
 { "Last Modified","Zuletzt geändert" },
 { "Journal viewer","Journal Anzeige" },
 { "Configure Calendar Files...","Konfiguriere Kalenderdateien..." },
 { "You can use and display <b>more than one</b> calendar file in KO/Pi. A calendar file is called a <b>resource</b>. To add a calendar or change calendar settings please use menu: <b>View -> Toggle Resource View</b>.","Sie können <b>mehr als eine</b> Kalenderdatei in KO/Pi darstellen und benutzen. Eine Kalenderdatei wird <b>Resource</b> genannt. Um einen Kalender hinzuzufügen oder die Kalendereinstellungen zu ändern benutzen Sie bitte das Menu: <b>Ansicht -> Resourcenansicht umschalten</b>." },
 { "Hide Completed","Verstecke erledigte Todos" },
 { "Show not Running","Zeige nicht Laufende" },
 { "Click to add new Todo","Klick für neues Todo!" },
 { "Show next conflict for","Zeige nächsten Konflikt für" },
 { "All events","Alle Termine" },
 { "Allday events","Ganztagestermine" },
 { "Events with time","Termine mit Zeit" },
 { "No conflict found","Kein Konflikt gefunden" },
 { "Conflict %1 <-> %2","Konflikt %1 <-> %2" },
 { "<p><b>Q</b>: Show next date with conflicting events\n ","<p><b>Q</b>: Zeige nächstes Datum mit Terminen im Konflikt\n " },
 { "Week view mode uses row layout","Wochenansicht Modus nutzt Reihenlayout" },
 { "The event\n%1\nconflicts with event\n%2\nat date\n%3.\n","Der Termin\n%1\nist im Konflikt mit Termin\n%2\nam Datum\n%3.\n" },
 { "KO/Pi Conflict delected","KO/Pi Konflikt erkannt" },
 { "Show date","Zeige Datum" },
 { "No problem!","Null Problemo!" },
 { "Automatically sync with KDE-Desktop\nwhen receiving sync request","Synce automatisch mit KDE-Desktop\nwenn eine Sync-Anforderung kommt" },
 { "Pi-Sync Port Error","Pi-Sync Port Fehler" },
 { "<b>Enabling Pi-Sync failed!</b> Failed to bind or listen to the port %1! Is another instance already listening to that port?","<b>Anschalten von Pi-Sync fehlgeschlagen!</b> Fehler beim Ansprechen des Ports %1! Ist bereits eine andere Anwendung dabei diesen Port zu nutzen?" },
 { "No valid port number:\n%1","Keine gültige Port Nummer:\n%1" },
 { "Port number (Default: %1)\nValid range from 1 to 65535","Port Nummer (Standard: %1)\nGültiger Bereich von 1 bis 65535" },
 { "Pi-Sync Error","Pi-Sync Fehler" },
 { "Got send file request\nwith invalid password","Erhielt "sende Datei" Anfrage\nmit ungültigem Passwort" },
 { "Got receive file request\nwith invalid password","Erhielt "empfange Datei" Anfrage\nmit ungültigem Passwort" },
 { "Wrong password: Receiving remote file failed.","Falsches Passwort: Empfangen von entfernter Datei fehlgeschlagen." },
 { "Please close error dialog on remote.","Bitte schließe Fehler-Dialog am entfernten Rechner" },
 { "Unknown error on remote.","Unbekannter Fehler am entfernten Rechner" },
 { "Pi-Sync: Connected!","Pi-Sync: Verbunden!" },
 { "Receiving file from remote...","Empfange entfernte Datei..." },
 { "Sending back synced file...","Sende synchronisierte Datei zurück..." },
 { "Do you want to\nclear all sync info\nof all profiles?","Möchten Sie wirklich\ndie Sync-Info\nfür alle Profile\nlöschen?" },
 { "Do you want to\nclear the sync\ninfo of profile\n%1?\n","Möchten Sie wirklich\ndie Sync-Info für Profil\n%1?\nlöschen" },
 { "Sorry, no valid port.Syncing cancelled.","Sorry, kein gültiger Port. Syncing abgebrochen." },
 { "Remote port number:\n(May be: 1 - 65535)","Ferne Port Nummer:\n(Darf sein: 1 - 65535)" },
 { "Writing back file ...","Schreibe Datei zurück..." },
 { "Sending back file ...","Sende Datei zurück..." },
 { "Eeek, there I am ticklish!","Hihi, da bin ich kitzlig!" },
 { "Created","Angelegt" },
 { "Last Modified Sub","Zuletzt geändertes Sub" },
 { "Checking conflicts ... please wait","Überprüfe Konflikte ... bitte warten" },
 { "Show times on two lines","Zeige Zeiten auf zwei Zeilen" },
-{ "","" },
+{ "Save using LOCAL storage","Speichere nutze LOCAL Pfad" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
diff --git a/libkdepim/kcmconfigs/kdepimconfigwidget.cpp b/libkdepim/kcmconfigs/kdepimconfigwidget.cpp
index ff1e240..764c495 100644
--- a/libkdepim/kcmconfigs/kdepimconfigwidget.cpp
+++ b/libkdepim/kcmconfigs/kdepimconfigwidget.cpp
@@ -105,238 +105,256 @@ KDEPIMConfigWidget::KDEPIMConfigWidget(KPimGlobalPrefs *prefs, QWidget *parent,
                                             KDialog::spacingHint() );
 
   tabWidget = new QTabWidget( this );
   topLayout->addWidget( tabWidget );
 
 
   setupLocaleTab();
   setupLocaleDateTab();
   setupTimeZoneTab();
   setupExternalAppTab();
   setupStoreTab();
   setupBackupTab();
 }
 void KDEPIMConfigWidget::showTimeZoneTab()
 {
     tabWidget->setCurrentPage ( 3 ) ;
 }
 void KDEPIMConfigWidget::setupBackupTab()
 {
     QVBox *colorPage = new QVBox( this );
     tabWidget->addTab( colorPage, i18n( "Backup" ) );
     QWidget* topFrame = new QWidget( colorPage ); 
     QVBoxLayout *topLayout = new QVBoxLayout(topFrame);
     KPrefsWidBool *sb = addWidBool(i18n("Backup enabled"),
                       &(KPimGlobalPrefs::instance()->mBackupEnabled),topFrame);
     topLayout->addWidget((QWidget*)sb->checkBox());
     QWidget* bupFrame = new QWidget( topFrame ); 
     topLayout->addWidget((bupFrame));
     QObject::connect ( sb->checkBox(), SIGNAL (toggled ( bool ) ), bupFrame, SLOT ( setEnabled( bool ) ) );
     QVBoxLayout *bupLayout = new QVBoxLayout(bupFrame);
     sb = addWidBool(i18n("Use standard backup dir"),
                       &(KPimGlobalPrefs::instance()->mBackupUseDefaultDir),bupFrame);
     bupLayout->addWidget((QWidget*)sb->checkBox());
     mBackupUrl = new KURLRequester( bupFrame );
     mBackupUrl->setPathIsDir();
     mBackupUrl->setURL( KGlobalSettings::backupDataDir() );
     QObject::connect ( sb->checkBox(), SIGNAL (toggled ( bool ) ), mBackupUrl ,SLOT ( setDisabled( bool ) ) );
     bupLayout->addWidget( mBackupUrl );
 
     mBackupUrl->setEnabled( !KPimGlobalPrefs::instance()->mBackupUseDefaultDir );
     bupFrame->setEnabled( KPimGlobalPrefs::instance()->mBackupEnabled );
     QHBox *dummy = new QHBox(bupFrame);
     new QLabel(i18n("Number of Backups:"),dummy);
     mBackupNumbersSpin = new QSpinBox(1,21,1,dummy);
     new QLabel(i18n(" "),dummy);
     bupLayout->addWidget( dummy );
 
     dummy = new QHBox(bupFrame);
     new QLabel(i18n("Make backup every "),dummy);
     mBackupDayCountSpin = new QSpinBox(1,28,1,dummy);
     new QLabel(i18n(" days"),dummy);
     new QLabel(i18n(" "),dummy);
     bupLayout->addWidget( dummy ); 
     QString localKdeDir;
     localKdeDir = readEnvPath("LOCALMICROKDEHOME");
     if ( ! localKdeDir.isEmpty() ) {
         sb->checkBox()->setEnabled( false );
         sb->checkBox()->setChecked( true );
         mBackupUrl->setEnabled( false );
         KPimGlobalPrefs::instance()->mBackupUseDefaultDir = true;
     }
 
 }
 void KDEPIMConfigWidget::setupStoreTab()
 {
     QVBox *colorPage = new QVBox( this );
     tabWidget->addTab( colorPage, i18n( "Colors" ) );
     QWidget* cw = new QWidget( colorPage ); 
     KPrefsWidColor *holidayColor =
       addWidColor(i18n("Alternating background of list views"),
                   &(KPimGlobalPrefs::instance()->mAlternateColor),cw);
     QHBoxLayout *topLayout = new QHBoxLayout(cw);
     topLayout->addWidget(holidayColor->label());
     topLayout->addWidget( (QWidget* )holidayColor->button());
 
 
     QVBox *storePage = new QVBox( this ); 
     if (  QApplication::desktop()->height() > 240 )
     new QLabel( i18n("Your current storage dir is:\n%1\nYour mail is stored in:\n(storagedir)/apps/kopiemail/localmail").arg(KGlobal::dirs()->localkdedir()), storePage  );
     new QLabel( i18n("<b>New data storage dir:</b>"), storePage );
     mStoreUrl = new KURLRequester( storePage );
     mStoreUrl->setPathIsDir();
     mStoreUrl->setURL( KGlobal::dirs()->localkdedir() );
 #ifdef DESKTOP_VERSION     
     QString confFile = qApp->applicationDirPath ()+ "/.microkdehome" ;
     QFileInfo fi ( confFile );
     if ( fi.exists() ) {
         KConfig cfg (   confFile );
         cfg.setGroup("Global");
         QString localKdeDir = cfg.readEntry( "MICROKDEHOME", "x_x_x" );
         if ( localKdeDir != "x_x_x" ) {
             mStoreUrl->setURL( localKdeDir );
             qDebug("Reading config from %s ", confFile.latin1());
         }
     }
                
-#endif
+#endif 
     new QLabel( i18n("New dirs are created automatically"), storePage  );
     QHBox *bb = new QHBox( storePage );
     QPushButton * pb;
     if ( QApplication::desktop()->width() < 640 )
         pb = new QPushButton ( i18n("Save"), bb  );
     else
         pb = new QPushButton ( i18n("Save settings"), bb  );
     connect(pb, SIGNAL( clicked() ), this, SLOT ( saveStoreSettings() ) );
     pb = new QPushButton ( i18n("Save standard"), bb  );
     connect(pb, SIGNAL( clicked() ), this, SLOT ( setStandardStore() ) );
 #ifdef DESKTOP_VERSION
     pb = new QPushButton ( i18n("Save using LOCAL storage"), bb  );
     connect(pb, SIGNAL( clicked() ), this, SLOT ( setLocalStore() ) );
 #endif
     new QLabel( i18n("<b>New settings are used\nafter a restart</b>"), storePage );
-    new QLabel( i18n("Settings are stored in\n%1").arg(QDir::homeDirPath() + "/.microkdehome" ), storePage  );
+    mDataStoragePath = new QLabel( i18n("Settings are stored in\n%1").arg(QDir::homeDirPath() + "/.microkdehome" ), storePage  );
     tabWidget->addTab( storePage, i18n( "Data storage path" ) );
+
+#ifdef DESKTOP_VERSION  
+      if ( mStoreUrl->url().startsWith( "LOCAL:" ) ) {
+	mDataStoragePath->setText( i18n("Settings are stored in\n%1").arg( qApp->applicationDirPath ()+"/.microkdehome" ));
+      }
+#endif
 }
 void KDEPIMConfigWidget::setLocalStore()
 {
     mStoreUrl->setURL(  "LOCAL:kdepimpi"  );
     saveStoreSettings();
     QString message = i18n("'LOCAL' mode makes is possible to run\nKA/Pi and KO/Pi from a USB memory stick.\nIn LOCAL mode the data is stored\nin a path relative to the executable.\nNote, that in LOCAL mode only addressbook\nresource files in\n <path of the executable>/<dirname after LOCAL:>/apps/kabc/*.vcf\n are supported.\nIf you use the standard addressbook settings\nyou do not have to reconfigure any path,\njust restart the application and import\nyour addressbook and calendar data.");
     KMessageBox::information( this, message);
 }
 void KDEPIMConfigWidget::setStandardStore()
 {
     mStoreUrl->setURL(  QDir::homeDirPath() + "/kdepim"  );
     saveStoreSettings();
 }
 void KDEPIMConfigWidget::saveStoreSettings()
 {
+#ifdef DESKTOP_VERSION
+        if ( !mStoreUrl->url().startsWith( "LOCAL:" ) ) {
+            QString file = qApp->applicationDirPath ()+"/.microkdehome";
+            QFileInfo fi ( file );
+            if ( fi.exists() ) {
+                bool res = QFile::remove( file );
+                if ( ! res )
+                    KMessageBox::information( this, i18n("ERROR: Cannot remove file\n%1\nPlease remove it manually.").arg( file ));
+            }
+        }
+#endif
     if ( !mStoreUrl->url().isEmpty() ) {
         QString path = QDir::homeDirPath();
         QString url = mStoreUrl->url();
 #ifdef DESKTOP_VERSION
         if ( url.startsWith( "LOCAL:" ) ) {
             path = qApp->applicationDirPath () ;
         }
 #endif
         KConfig cfg (   path + "/.microkdehome" );
         cfg.setGroup("Global");
         cfg.writeEntry( "MICROKDEHOME", url ); 
         qDebug("cfg.writeEntry( MICROKDEHOME, %s  ", url.latin1());
         cfg.sync();
+	mDataStoragePath->setText( i18n("Settings are stored in\n%1").arg( path+"/.microkdehome" ));
     } else {
         mStoreUrl->setURL(  QDir::homeDirPath() + "/kdepim"  );
         saveStoreSettings();
     }
 }
 void KDEPIMConfigWidget::setupExternalAppTab()
 {
   QWidget *externalAppsPage = new QWidget( this );
   QVBoxLayout* layout = new QVBoxLayout( externalAppsPage, KDialog::marginHintSmall(),
                                             KDialog::spacingHintSmall() );
 
   mExternalApps = new QComboBox( externalAppsPage );
 
   QMap<ExternalAppHandler::Types, QString>::Iterator it;
   for( it = mExternalAppsMap.begin(); it != mExternalAppsMap.end(); ++it )
     mExternalApps->insertItem( it.data(), it.key() );
 
   layout->addWidget( mExternalApps );
 
   connect( mExternalApps, SIGNAL( activated( int ) ),
            this, SLOT (externalapp_changed( int ) ) );
 
 
   mExternalAppGroupBox = new QGroupBox( 0, Qt::Vertical, i18n( "Used Mail Client" ), externalAppsPage );
   QGridLayout *boxLayout = new QGridLayout( mExternalAppGroupBox->layout(), 4, 2,    -1, "gridlayout" );
   mExternalAppGroupBox->layout()->setMargin(4);
 
   mClient = new QComboBox( mExternalAppGroupBox );
   boxLayout->addMultiCellWidget( mClient, 0, 0, 0, 1 );
 
   connect( mClient, SIGNAL( activated( int ) ),
            this, SLOT (client_changed( int ) ) );
 
   QLabel* lab = new QLabel( i18n("Channel:"), mExternalAppGroupBox);
   boxLayout->addWidget( lab, 1, 0 );
   mChannel = new QLineEdit(mExternalAppGroupBox);
   mChannel->setReadOnly(true);
   boxLayout->addMultiCellWidget( mChannel, 2 , 2, 0, 1 );
 
   lab = new QLabel( i18n("Message:"), mExternalAppGroupBox);
   boxLayout->addWidget( lab, 3, 0 );
   mMessage = new QLineEdit(mExternalAppGroupBox);
   mMessage->setReadOnly(true);
   boxLayout->addWidget( mMessage , 4, 0);
 
   lab = new QLabel( i18n("Parameters:"), mExternalAppGroupBox);
   boxLayout->addWidget( lab, 3, 1 );
   mParameters = new QLineEdit(mExternalAppGroupBox);
   mParameters->setReadOnly(true);
   boxLayout->addWidget( mParameters, 4, 1 );
       lab = new QLabel( i18n("HINT: Delimiter=; Name=%1,Email=%2"), mExternalAppGroupBox);
       boxLayout->addMultiCellWidget( lab, 5, 5, 0, 1 );
 
 
   if (  QApplication::desktop()->height() > 240 ) {
       lab = new QLabel( i18n("extra Message:"), mExternalAppGroupBox);
       boxLayout->addWidget( lab, 6, 0 );
       mMessage2 = new QLineEdit(mExternalAppGroupBox);
       mMessage2->setReadOnly(true);
       boxLayout->addWidget( mMessage2 , 7, 0);
 
       lab = new QLabel( i18n("extra Parameters:"), mExternalAppGroupBox);
       boxLayout->addWidget( lab, 6, 1 );
       mParameters2 = new QLineEdit(mExternalAppGroupBox);
       mParameters2->setReadOnly(true);
       boxLayout->addWidget( mParameters2, 7, 1 );
 
       lab = new QLabel( i18n("HINT: Emails=%1,Attachments=%2"), mExternalAppGroupBox);
       boxLayout->addMultiCellWidget( lab, 8, 8, 0, 1 );
       connect( mMessage2, SIGNAL( textChanged ( const QString & )), this, SLOT( textChanged ( const QString & ))  );
       connect( mParameters2, SIGNAL( textChanged ( const QString & )), this, SLOT( textChanged ( const QString & ))  );
   } else {
       mMessage2 = 0;
       mParameters2 = 0;
   }
 
   connect( mChannel, SIGNAL( textChanged ( const QString & )), this, SLOT( textChanged ( const QString & ))  );
   connect( mMessage, SIGNAL( textChanged ( const QString & )), this, SLOT( textChanged ( const QString & ))  );
   connect( mParameters, SIGNAL( textChanged ( const QString & )), this, SLOT( textChanged ( const QString & ))  );
 
 
   layout->addWidget( mExternalAppGroupBox );
   tabWidget->addTab( externalAppsPage, i18n( "External Apps." ) );
 
 }
 
   
 void KDEPIMConfigWidget::setupLocaleDateTab()
 {
   QWidget *topFrame = new QWidget( this );
   QGridLayout *topLayout = new QGridLayout( topFrame, 3, 2);
 
    topLayout->setSpacing(KDialog::spacingHintSmall());
    topLayout->setMargin(KDialog::marginHintSmall());  
    int iii = 0;
 
@@ -748,194 +766,196 @@ void KDEPIMConfigWidget::updateClientWidgets()
       }
       else if ((mCurrentApp == ExternalAppHandler::SIP) && (mCurrentClient == KPimGlobalPrefs::OTHER_SIC))
       {
         mChannel->setText(mSipOtherChannel);
         mMessage->setText(mSipOtherMessage);
         mParameters->setText(mSipOtherMessageParameters);
       }
     }
 
   }
 
   bool readonly;
   bool enabled;
   if ( ((mCurrentApp == ExternalAppHandler::EMAIL) && (mCurrentClient == KPimGlobalPrefs::OTHER_EMC))
      ||((mCurrentApp == ExternalAppHandler::PHONE) && (mCurrentClient == KPimGlobalPrefs::OTHER_PHC))
      ||((mCurrentApp == ExternalAppHandler::SMS) && (mCurrentClient == KPimGlobalPrefs::OTHER_SMC))
      ||((mCurrentApp == ExternalAppHandler::FAX) && (mCurrentClient == KPimGlobalPrefs::OTHER_FAC))
      ||((mCurrentApp == ExternalAppHandler::PAGER) && (mCurrentClient == KPimGlobalPrefs::OTHER_PAC))
      ||((mCurrentApp == ExternalAppHandler::SIP) && (mCurrentClient == KPimGlobalPrefs::OTHER_SIC)))
      {
        readonly = false;
 	 }
 	 else
 	 {
        readonly = true;
 	 }
 
   if ( ((mCurrentApp == ExternalAppHandler::EMAIL) && (mCurrentClient == KPimGlobalPrefs::NONE_EMC))
      ||((mCurrentApp == ExternalAppHandler::PHONE) && (mCurrentClient == KPimGlobalPrefs::NONE_PHC))
      ||((mCurrentApp == ExternalAppHandler::SMS) && (mCurrentClient == KPimGlobalPrefs::NONE_SMC))
      ||((mCurrentApp == ExternalAppHandler::FAX) && (mCurrentClient == KPimGlobalPrefs::NONE_FAC))
      ||((mCurrentApp == ExternalAppHandler::PAGER) && (mCurrentClient == KPimGlobalPrefs::NONE_PAC))
      ||((mCurrentApp == ExternalAppHandler::SIP) && (mCurrentClient == KPimGlobalPrefs::NONE_SIC)))
      {
        enabled = false;
 	 }
 	 else
 	 {
        enabled = true;
 	 }
 
 
   mChannel->setReadOnly(readonly);
   mMessage->setReadOnly(readonly);
   mParameters->setReadOnly(readonly); 
   if ( mMessage2 )
   mMessage2->setReadOnly(readonly);
     if ( mParameters2 )
   mParameters2->setReadOnly(readonly);
 
   mChannel->setEnabled(enabled);
   mMessage->setEnabled(enabled);
   mParameters->setEnabled(enabled);
   if ( mMessage2 )
   mMessage2->setEnabled(enabled);
     if ( mParameters2 )
   mParameters2->setEnabled(enabled);
 
 
 
   mClient->setCurrentItem(mCurrentClient);
 
 
   // enable/disable the extra message/parameter field
   if (mCurrentApp == ExternalAppHandler::EMAIL)
   {
   }
   else
   {
   if ( mMessage2 )
     mMessage2->setText( "" );
     if ( mParameters2 )
     mParameters2->setText( "" );
   }
 
   if (enabled == true) {
   if ( mMessage2 )
     mMessage2->setEnabled(mCurrentApp == ExternalAppHandler::EMAIL);
     if ( mParameters2 )
     mParameters2->setEnabled(mCurrentApp == ExternalAppHandler::EMAIL);
   }
 
 
   blockSignals( blocked );
 
 }
 
 void KDEPIMConfigWidget::usrReadConfig()
 {
   KPimGlobalPrefs* prefs = KPimGlobalPrefs::instance();
 
   bool blocked = signalsBlocked();
   blockSignals( true );
 
   if (KPimGlobalPrefs::instance()->mBackupUseDefaultDir )
       mBackupUrl->setURL( KGlobalSettings::backupDataDir() );
-  else
+  else {
       mBackupUrl->setURL(prefs->mBackupDatadir);
+
+  }
   mBackupNumbersSpin->setValue( prefs->mBackupNumbers );
   mBackupDayCountSpin->setValue( prefs->mBackupDayCount);
 
   QString dummy = prefs->mUserDateFormatLong;
   mUserDateFormatLong->setText(dummy.replace( QRegExp("K"), QString(",") ));
   dummy = prefs->mUserDateFormatShort;
   mUserDateFormatShort->setText(dummy.replace( QRegExp("K"), QString(",") ));
 
   QDate current ( 2001, 1,1);
   mStartDateSavingEdit->setDate(current.addDays(prefs->mDaylightsavingStart-1));
   mEndDateSavingEdit->setDate(current.addDays(prefs->mDaylightsavingEnd-1));
   setCombo(mTimeZoneCombo,i18n(prefs->mTimeZoneId));
 
   mEmailClient = prefs->mEmailClient;
   mEmailOtherChannel = prefs->mEmailOtherChannel;
   mEmailOtherMessage = prefs->mEmailOtherMessage;
   mEmailOtherMessageParameters = prefs->mEmailOtherMessageParameters;
   mEmailOtherMessage2 = prefs->mEmailOtherMessage2;
   mEmailOtherMessageParameters2 = prefs->mEmailOtherMessageParameters2;
 
   mPhoneClient = prefs->mPhoneClient;
   mPhoneOtherChannel = prefs->mPhoneOtherChannel;
   mPhoneOtherMessage = prefs->mPhoneOtherMessage;
   mPhoneOtherMessageParameters = prefs->mPhoneOtherMessageParameters;
 
   mFaxClient = prefs->mFaxClient;
   mFaxOtherChannel = prefs->mFaxOtherChannel;
   mFaxOtherMessage = prefs->mFaxOtherMessage;
   mFaxOtherMessageParameters = prefs->mFaxOtherMessageParameters;
 
   mSMSClient = prefs->mSMSClient;
   mSMSOtherChannel = prefs->mSMSOtherChannel;
   mSMSOtherMessage = prefs->mSMSOtherMessage;
   mSMSOtherMessageParameters = prefs->mSMSOtherMessageParameters;
 
   mPagerClient = prefs->mPagerClient;
   mPagerOtherChannel = prefs->mPagerOtherChannel;
   mPagerOtherMessage = prefs->mPagerOtherMessage;
   mPagerOtherMessageParameters = prefs->mPagerOtherMessageParameters;
 
   mSipClient = prefs->mSipClient;
   mSipOtherChannel = prefs->mSipOtherChannel;
   mSipOtherMessage = prefs->mSipOtherMessage;
   mSipOtherMessageParameters = prefs->mSipOtherMessageParameters;
 
   mCurrentApp = ExternalAppHandler::EMAIL;
   mCurrentClient = mEmailClient;
 
   updateClientWidgets();
 
   blockSignals( blocked );
 
 }
 
 void KDEPIMConfigWidget::usrWriteConfig()
 {
   KPimGlobalPrefs* prefs = KPimGlobalPrefs::instance();
 
   saveEditFieldSettings();
 
   prefs->mBackupNumbers  = mBackupNumbersSpin->value();
   prefs->mBackupDayCount = mBackupDayCountSpin->value();
   prefs->mBackupDatadir = mBackupUrl->url();
 
   prefs->mUserDateFormatShort = mUserDateFormatShort->text().replace( QRegExp(","), QString("K") );
   prefs->mUserDateFormatLong = mUserDateFormatLong->text().replace( QRegExp(","), QString("K") );
 
   prefs->mTimeZoneId = mTimeZoneCombo->currentText();
   QDate date;
   date = mStartDateSavingEdit->date();
   int sub = 0;
   if ( QDate::leapYear( date.year() ) && date.dayOfYear() > 59 )
       sub = 1;
   prefs->mDaylightsavingStart = date.dayOfYear()-sub;
   date = mEndDateSavingEdit->date();
   if ( QDate::leapYear( date.year() ) && date.dayOfYear() > 59  )
       sub = 1;
   else 
       sub = 0;
   prefs->mDaylightsavingEnd = date.dayOfYear()-sub;
 
 
   prefs->mEmailClient = mEmailClient;
   prefs->mEmailOtherChannel = mEmailOtherChannel;
   prefs->mEmailOtherMessage = mEmailOtherMessage;
   prefs->mEmailOtherMessageParameters = mEmailOtherMessageParameters;
   prefs->mEmailOtherMessage2 = mEmailOtherMessage2;
   prefs->mEmailOtherMessageParameters2 = mEmailOtherMessageParameters2;
 
   prefs->mPhoneClient = mPhoneClient;
   prefs->mPhoneOtherChannel = mPhoneOtherChannel;
   prefs->mPhoneOtherMessage = mPhoneOtherMessage;
   prefs->mPhoneOtherMessageParameters = mPhoneOtherMessageParameters;
 
   prefs->mFaxClient = mFaxClient;
   prefs->mFaxOtherChannel = mFaxOtherChannel;
diff --git a/libkdepim/kcmconfigs/kdepimconfigwidget.h b/libkdepim/kcmconfigs/kdepimconfigwidget.h
index c0b92a9..824ef79 100644
--- a/libkdepim/kcmconfigs/kdepimconfigwidget.h
+++ b/libkdepim/kcmconfigs/kdepimconfigwidget.h
@@ -59,105 +59,105 @@ class KDEPIMConfigWidget : public KPrefsWidget
   protected:
     /** Implement this to read custom configuration widgets. */
   virtual void usrReadConfig();
     /** Implement this to write custom configuration widgets. */
   virtual void usrWriteConfig();
 
 
   private slots:
 //    void configureExtension();
 //    void selectionChanged( QListViewItem* );
 //    void itemClicked( QListViewItem* );
     void client_changed( int newClient );
     void externalapp_changed( int newApp );
     void saveStoreSettings();
     void setStandardStore();
     void setLocalStore(); 
 
   private:
     void setupExternalAppTab();
     void setupLocaleDateTab();
     void setupLocaleTab();
     void setupTimeZoneTab();
     void setupStoreTab();
     void setupBackupTab();
     KURLRequester* mStoreUrl;
 
     void setCombo(QComboBox *combo,const QString & text, const QStringList *tags = 0);
 
 
     void saveEditFieldSettings();
     void updateClientWidgets();
 
     QTabWidget *tabWidget;
 
 
     QLineEdit* mUserDateFormatShort;
     QLineEdit* mUserDateFormatLong;
     QComboBox* mTimeZoneCombo;
     KDateEdit* mStartDateSavingEdit;
     KDateEdit* mEndDateSavingEdit; 
 
 //    void restoreExtensionSettings();
 //    void saveExtensionSettings();
 
 //    KListView *mExtensionView;
 
 //    QCheckBox *mNameParsing;
 //    QCheckBox *mViewsSingleClickBox;
 //    QPushButton *mConfigureButton;
 	QComboBox* mExternalApps;
 	QGroupBox* mExternalAppGroupBox;
 
 
     QComboBox* mClient;
     QLineEdit* mChannel;
     QLineEdit* mMessage;
     QLineEdit* mParameters;
     QLineEdit* mMessage2;
     QLineEdit* mParameters2;
 
     ExternalAppHandler::Types mCurrentApp;
     int mCurrentClient;
 
 
     int mEmailClient;
     QString mEmailOtherChannel;
     QString mEmailOtherMessage;
     QString mEmailOtherMessageParameters;
     QString mEmailOtherMessage2;
     QString mEmailOtherMessageParameters2;
 
     int mPhoneClient;
     QString mPhoneOtherChannel;
     QString mPhoneOtherMessage;
     QString mPhoneOtherMessageParameters;
 
     int mFaxClient;
     QString mFaxOtherChannel;
     QString mFaxOtherMessage;
     QString mFaxOtherMessageParameters;
 
     int mSMSClient;
     QString mSMSOtherChannel;
     QString mSMSOtherMessage;
     QString mSMSOtherMessageParameters;
 
     int mPagerClient;
     QString mPagerOtherChannel;
     QString mPagerOtherMessage;
     QString mPagerOtherMessageParameters;
 
     int mSipClient;
     QString mSipOtherChannel;
     QString mSipOtherMessage;
     QString mSipOtherMessageParameters;
 
-
+    QLabel* mDataStoragePath;
     KURLRequester* mBackupUrl;
     QSpinBox* mBackupDayCountSpin, *mBackupNumbersSpin   ;
     QMap<ExternalAppHandler::Types, QString> mExternalAppsMap;
 
 //    AddresseeWidget *mAddresseeWidget;
 };
 
 #endif
diff --git a/libkdepim/kdatepicker.cpp b/libkdepim/kdatepicker.cpp
index 7f352d6..25b4e81 100644
--- a/libkdepim/kdatepicker.cpp
+++ b/libkdepim/kdatepicker.cpp
@@ -384,106 +384,107 @@ KDatePicker::lineEnterPressed()
 //     }
 }
 
 QSize
 KDatePicker::sizeHint() const
 {
   QSize tableSize=table->sizeHint();
   QWidget *buttons[]={
     yearBackward,
     monthBackward,
     selectMonth,
     selectYear,
     monthForward,
     yearForward };
   const int NoOfButtons=sizeof(buttons)/sizeof(buttons[0]);
   QSize sizes[NoOfButtons];
   int cx=0, cy=0, count;
   // ----- store the size hints:
   for(count=0; count<NoOfButtons; ++count)
     {
       sizes[count]=buttons[count]->sizeHint();
       if(buttons[count]==selectMonth)
 	{
 	  cx+=maxMonthRect.width()+15;
 	} else {
 	  cx+=sizes[count].width()+15;
 	}
       cy=QMAX(sizes[count].height(), cy);
     }
   // ----- calculate width hint:
   cx=QMAX(cx, tableSize.width()); // line edit ignored
   if ( cx > QApplication::desktop()->width() -5 )
       cx = QApplication::desktop()->width() -5;
   // ----- calculate height hint:
   cy+=tableSize.height()+lineDate->sizeHint().height();
  
   return QSize(cx, cy);
 }
 
 void
 KDatePicker::setFontSize(int s)
 {
   QWidget *buttons[]= {
     // yearBackward,
     // monthBackward,
     selectMonth,
     selectYear,
     // monthForward,
     // yearForward
   };
   const int NoOfButtons=sizeof(buttons)/sizeof(buttons[0]);
   int count;
   QFont font;
   QRect r;
   // -----
   fontsize=s;
   for(count=0; count<NoOfButtons; ++count)
     {
       font=buttons[count]->font();
       font.setPointSize(s);
       buttons[count]->setFont(font);
     }
   QFontMetrics metrics(selectMonth->fontMetrics());
   for(int i=1; i <= 12; ++i)
     { // maxMonthRect is used by sizeHint()
       r=metrics.boundingRect(KGlobal::locale()->monthName(i, false));
       maxMonthRect.setWidth(QMAX(r.width(), maxMonthRect.width()));
       maxMonthRect.setHeight(QMAX(r.height(),  maxMonthRect.height()));
     }
   table->setFontSize(s);
 }
 
 void KDatePicker::virtual_hook( int id, void* data )
 { /*BASE::virtual_hook( id, data );*/ }
 
 void  KDatePicker::keyPressEvent ( QKeyEvent * e ) 
 {
     switch ( e->key() ) {
     case Qt::Key_Right:
             monthForwardClicked();
           break;
     case Qt::Key_Left:
             monthBackwardClicked();
         break;
         
     case Qt::Key_Down:
         yearForwardClicked();
         
         break;
               
     case Qt::Key_Up:
          yearBackwardClicked();
         break;             
    
     case Qt::Key_Return:  
     case Qt::Key_Enter:  
+    case Qt::Key_Space:  
         tableClickedSlot();
         break;
      case Qt::Key_Escape:
          e->ignore();
         break;
     default:
           break;
     }
 
 }