- added the device button stuff to ODevice

- ODevice is now derived from QObject (don't ask me why I didn't make this
  from the beginning)

5 files changed, 609 insertions, 20 deletions

diff --git a/libopie/libopie.pro b/libopie/libopie.pro
index c829083..58a7489 100644
--- a/libopie/libopie.pro
+++ b/libopie/libopie.pro
@@ -1,104 +1,104 @@
 TEMPLATE        = lib
 CONFIG          += qte warn_on release
 HEADERS   = ofontmenu.h \
     ocolorbutton.h \
     ofiledialog.h ofileselector.h tododb.h \
     ocheckitem.h todoevent.h todoresource.h \
     todovcalresource.h xmltree.h \
     colordialog.h colorpopupmenu.h \
     oclickablelabel.h oprocctrl.h \
-    oprocess.h odevice.h \
+    oprocess.h odevice.h odevicebutton.h \
     otimepicker.h otabwidget.h \
     otabbar.h otabinfo.h \
     ofontselector.h \
     pim/opimrecord.h \
     pim/otodo.h \
     pim/orecordlist.h \
     pim/opimaccesstemplate.h \
     pim/opimaccessbackend.h \
     pim/otodoaccess.h \
     pim/otodoaccessbackend.h \
     pim/ocontact.h \
     pim/ocontactaccess.h \
     pim/ocontactaccessbackend.h \
     pim/ocontactaccessbackend_xml.h \
     pim/ocontactaccessbackend_vcard.h \
     pim/obackendfactory.h \
     pim/opimcache.h \ 
     pim/otodoaccessvcal.h \
     pim/orecur.h \
     pim/opimstate.h \
     pim/opimxrefpartner.h \
     pim/opimxref.h \
     pim/opimxrefmanager.h \
     pim/opimmaintainer.h \
     pim/opimnotify.h \
     pim/opimnotifymanager.h \
     pim/opimmainwindow.h \
     pim/opimresolver.h \
     orecurrancewidget.h \
     oticker.h 
 #    pim/otodoaccesssql.h \
 
 SOURCES   = ofontmenu.cc  \
         ocolorbutton.cpp \
         sharp_compat.cpp \
       xmltree.cc \
       ofiledialog.cc ofileselector.cc \
             ocheckitem.cpp tododb.cpp todoevent.cpp \
       todovcalresource.cpp  colordialog.cpp \
       colorpopupmenu.cpp oclickablelabel.cpp \
       oprocctrl.cpp oprocess.cpp \
-      odevice.cpp otimepicker.cpp \
+      odevice.cpp odevicebutton.cpp otimepicker.cpp \
        otabwidget.cpp otabbar.cpp \
              ofontselector.cpp \
              pim/otodo.cpp \
              pim/opimrecord.cpp \
        pim/otodoaccess.cpp \
        pim/otodoaccessbackend.cpp \
              pim/otodoaccessxml.cpp \
              pim/ocontact.cpp \
              pim/ocontactaccess.cpp \
              pim/ocontactaccessbackend_vcard.cpp \
        pim/otodoaccessvcal.cpp \
        pim/orecur.cpp \
        pim/opimstate.cpp \
        pim/opimxrefpartner.cpp \
        pim/opimxref.cpp \
        pim/opimxrefmanager.cpp \
        pim/opimmaintainer.cpp \
        pim/opimnotify.cpp \
        pim/opimnotifymanager.cpp \
        pim/opimmainwindow.cpp \
        pim/opimresolver.cpp \
        orecurrancewidget.cpp \
        oticker.cpp
 #             pim/otodoaccesssql.cpp \
 
 TARGET    = opie
 INCLUDEPATH += $(OPIEDIR)/include
 DESTDIR      = $(QTDIR)/lib$(PROJMAK)
 #VERSION = 1.0.0
 
 LIBS += -lqpe
 
 # LIBS            += -lopiesql
 
 INTERFACES      = otimepickerbase.ui orecurrancebase.ui
 
 TRANSLATIONS = ../i18n/de/libopie.ts \
 	 ../i18n/xx/libopie.ts \
    ../i18n/en/libopie.ts \
    ../i18n/es/libopie.ts \
    ../i18n/fr/libopie.ts \
    ../i18n/hu/libopie.ts \
    ../i18n/ja/libopie.ts \
    ../i18n/ko/libopie.ts \
    ../i18n/no/libopie.ts \
    ../i18n/pl/libopie.ts \
    ../i18n/pt/libopie.ts \
    ../i18n/pt_BR/libopie.ts \
    ../i18n/sl/libopie.ts \
    ../i18n/zh_CN/libopie.ts \
    ../i18n/zh_TW/libopie.ts \
    ../i18n/da/libopie.ts
diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index c947630..f93d1ed 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -1,962 +1,1176 @@
 /*  This file is part of the OPIE libraries
     Copyright (C) 2002 Robert Griebl (sandman@handhelds.org)
 
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Library General Public
     License as published by the Free Software Foundation; either
     version 2 of the License, or (at your option) any later version.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Library General Public License for more details.
 
     You should have received a copy of the GNU Library General Public License
     along with this library; see the file COPYING.LIB.  If not, write to
     the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
     Boston, MA 02111-1307, USA.
 */
 
 #include <stdlib.h>
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 #include <signal.h>
 #include <sys/time.h>
 #include <linux/soundcard.h>
 #include <math.h>
 
 #include <qapplication.h>
 
 #include <qfile.h>
 #include <qtextstream.h>
 #include <qpe/sound.h>
 #include <qpe/resource.h>
 #include <qpe/config.h>
+#include <qpe/qcopenvelope_qws.h>
 
 #include "odevice.h"
 
 #include <qwindowsystem_qws.h>
 
 
 // _IO and friends are only defined in kernel headers ...
 
 #define OD_IOC(dir,type,number,size)    (( dir << 30 ) | ( type << 8 ) | ( number ) | ( size << 16 ))
 
 #define OD_IO(type,number)              OD_IOC(0,type,number,0)
 #define OD_IOW(type,number,size)        OD_IOC(1,type,number,sizeof(size))
 #define OD_IOR(type,number,size)        OD_IOC(2,type,number,sizeof(size))
 #define OD_IORW(type,number,size)       OD_IOC(3,type,number,sizeof(size))
 
 using namespace Opie;
 
 class ODeviceData {
 public:
 	bool m_qwsserver;
 
 	QString m_vendorstr;
 	OVendor m_vendor;
 	
 	QString m_modelstr;
 	OModel m_model;
 
 	QString m_systemstr;
 	OSystem m_system;
 	
 	QString m_sysverstr;
+	
+	QValueList <ODeviceButton> m_buttons;
+	uint                       m_holdtime;
 };
 
 
-class iPAQ : public QObject, public ODevice, public QWSServer::KeyboardFilter {
+class iPAQ : public ODevice, public QWSServer::KeyboardFilter {
 protected: 
 	virtual void init ( );
 	
 public:
 	virtual bool setSoftSuspend ( bool soft );
 
 	virtual bool setDisplayBrightness ( int b );
 	virtual int displayBrightnessResolution ( ) const;
 
 	virtual void alarmSound ( );
 	
     virtual QValueList <OLed> ledList ( ) const;
 	virtual QValueList <OLedState> ledStateList ( OLed led ) const;
 	virtual OLedState ledState ( OLed led ) const;
 	virtual bool setLedState ( OLed led, OLedState st );
 
 	virtual bool hasLightSensor ( ) const;
 	virtual int readLightSensor ( );
 	virtual int lightSensorResolution ( ) const;
 	
-	//virtual QValueList <int> keyList ( ) const;
-	
 protected:
 	virtual bool filter ( int unicode, int keycode, int modifiers, bool isPress, bool autoRepeat );
 	virtual void timerEvent ( QTimerEvent *te );
 	
 	int m_power_timer;
 	
 	OLedState m_leds [2];
 };
 
 class Zaurus : public ODevice {
 protected:
 	virtual void init ( );
 
 public:	
 	virtual bool setSoftSuspend ( bool soft );
 
 	virtual bool setDisplayBrightness ( int b );
 	virtual int displayBrightnessResolution ( ) const;
 
 	virtual void alarmSound ( );
 	virtual void keySound ( );
 	virtual void touchSound ( );	
 
     virtual QValueList <OLed> ledList ( ) const;
 	virtual QValueList <OLedState> ledStateList ( OLed led ) const;
 	virtual OLedState ledState ( OLed led ) const;
 	virtual bool setLedState ( OLed led, OLedState st );
 	
-	//virtual QValueList <int> keyList ( ) const;
-	
 protected:
 	virtual void buzzer ( int snd );
 	
 	OLedState m_leds [1];
 };
 
 
+struct i_button {
+	uint model;
+    Qt::Key code;
+    char *utext;
+    char *pix;
+    char *fpressedservice;
+    char *fpressedaction;
+    char *fheldservice;
+    char *fheldaction;
+} ipaq_buttons [] = {
+    { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx, 
+    Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Calendar Button"), 
+	"devicebuttons/ipaq_calendar", 
+	"datebook", "nextView()", 
+	"today", "raise()" },
+    { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx,
+    Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"), 
+	"devicebuttons/ipaq_contact",  
+	"addressbook", "raise()",
+	"addressbook", "beamBusinessCard()" },
+    { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx, 
+    Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"), 
+	"devicebuttons/ipaq_menu",
+ 	"QPE/TaskBar", "toggleMenu()",
+	"QPE/TaskBar", "toggleStartMenu()" },
+    { Model_iPAQ_H38xx | Model_iPAQ_H39xx,
+    Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Mail Button"), 
+	"devicebuttons/ipaq_mail",
+	"mail", "raise()",
+	"mail", "newMail()" },
+    { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx,
+    Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"), 
+	"devicebuttons/ipaq_home", 
+	"QPE/Launcher", "home()",
+	"buttonsettings", "raise()" },
+    { Model_iPAQ_H31xx | Model_iPAQ_H36xx | Model_iPAQ_H37xx | Model_iPAQ_H38xx | Model_iPAQ_H39xx,
+    Qt::Key_F24, QT_TRANSLATE_NOOP("Button", "Record Button"), 
+	"devicebuttons/ipaq_record", 
+	"QPE/VMemo", "toggleRecord()",
+	"sound", "raise()" },
+};
 
+struct z_button {
+    Qt::Key code;
+    char *utext;
+    char *pix;
+    char *fpressedservice;
+    char *fpressedaction;
+    char *fheldservice;
+    char *fheldaction;
+} z_buttons [] = {
+    { Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Calendar Button"),
+	"devicebuttons/z_calendar",
+	"datebook", "nextView()",
+	"today", "raise()" },
+    { Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Contacts Button"),
+	"devicebuttons/z_contact",
+	"addressbook", "raise()",
+	"addressbook", "beamBusinessCard()" },
+    { Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
+	"devicebuttons/z_home",
+	"QPE/Launcher", "home()",
+	"buttonsettings", "raise()" },
+    { Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Menu Button"),
+	"devicebuttons/z_menu",
+ 	"QPE/TaskBar", "toggleMenu()",
+	"QPE/TaskBar", "toggleStartMenu()" },
+    { Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Mail Button"),
+	"devicebuttons/z_mail",
+	"mail", "raise()",
+	"mail", "newMail()" },
+};
+
+static QCString makeChannel ( const char *str )
+{
+	if ( str && !::strchr ( str, '/' ))
+		return QCString ( "QPE/Application/" ) + str;
+	else
+		return str;
+}
 
 
 
 
 ODevice *ODevice::inst ( )
 {
 	static ODevice *dev = 0;
 	
 	if ( !dev ) {
 		if ( QFile::exists ( "/proc/hal/model" ))
 			dev = new iPAQ ( );
 		else if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ))
 			dev = new Zaurus ( );
 		else
 			dev = new ODevice ( );
 			
 		dev-> init ( );
 	}
 	return dev;
 }
 
 
 /**************************************************
  *
  * common
  *
  **************************************************/
 
 
 ODevice::ODevice ( )
 {
 	d = new ODeviceData;
 
 	d-> m_qwsserver = qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 
 	d-> m_modelstr = "Unknown";
 	d-> m_model = Model_Unknown;
 	d-> m_vendorstr = "Unkown";
 	d-> m_vendor = Vendor_Unknown;
 	d-> m_systemstr = "Unkown";
 	d-> m_system = System_Unknown;
 	d-> m_sysverstr = "0.0";
+	
+	d-> m_holdtime = 1000; // 1000ms
+	
+	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
+	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));	                     	
+}
+
+void ODevice::systemMessage ( const QCString &msg, const QByteArray & )
+{
+	if ( msg == "deviceButtonMappingChanged()" ) {
+		reloadButtonMapping ( );
+	} 
 }
 
 void ODevice::init ( )
 {
+	// Simulation uses iPAQ 3660 device buttons
+
+	for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
+		i_button *ib = ipaq_buttons + i;	
+		ODeviceButton b;
+		
+		if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {		
+			b. setKeycode ( ib-> code );
+			b. setUserText ( qApp-> translate ( "Button", ib-> utext ));
+			b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
+			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
+			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
+                                        
+			d-> m_buttons. append ( b );
+		}
+	}
+	reloadButtonMapping ( );
 }
 
 ODevice::~ODevice ( )
 {
 	delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
 	return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 
 bool ODevice::suspend ( )
 {
 	if ( !d-> m_qwsserver ) // only qwsserver is allowed to suspend
 		return false;
 
 	if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
 		return false;
 
 	bool res = false;
 	
 	struct timeval tvs, tvn;
 	::gettimeofday ( &tvs, 0 );
 	
 	::sync ( ); // flush fs caches
 	res = ( ::system ( "apm --suspend" ) == 0 );
 
 	// This is needed because the iPAQ apm implementation is asynchronous and we
 	// can not be sure when exactly the device is really suspended
 	// This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
 	if ( res ) {	
 		do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
 			::usleep ( 200 * 1000 );
 			::gettimeofday ( &tvn, 0 );				
 		} while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 );
 	}
 	
 	return res;
 }
 
 //#include <linux/fb.h> better not rely on kernel headers in userspace ...
 
 #define FBIOBLANK             OD_IO( 'F', 0x11 ) // 0x4611
 
 /* VESA Blanking Levels */
 #define VESA_NO_BLANKING      0
 #define VESA_VSYNC_SUSPEND    1
 #define VESA_HSYNC_SUSPEND    2
 #define VESA_POWERDOWN        3
 
 
 bool ODevice::setDisplayStatus ( bool on )
 {
 	if ( d-> m_model == Model_Unknown )
 		return false;
 
 	bool res = false;
 	int fd;
 	
 	if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
 		res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 );
 		::close ( fd );
 	}	                                                                                       
 	return res;
 }
 
 bool ODevice::setDisplayBrightness ( int )
 {
 	return false;
 }
 
 int ODevice::displayBrightnessResolution ( ) const
 {
 	return 16;
 }
 
 QString ODevice::vendorString ( ) const
 {
 	return d-> m_vendorstr;
 }
 
 OVendor ODevice::vendor ( ) const
 {
 	return d-> m_vendor;
 }
 
 QString ODevice::modelString ( ) const
 {
 	return d-> m_modelstr;
 }
 
 OModel ODevice::model ( ) const
 {
 	return d-> m_model;
 }
 
 QString ODevice::systemString ( ) const
 {
 	return d-> m_systemstr;
 }
 
 OSystem ODevice::system ( ) const
 {
 	return d-> m_system;
 }
 
 QString ODevice::systemVersionString ( ) const
 {
 	return d-> m_sysverstr;
 }
 
 void ODevice::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "alarm" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 void ODevice::keySound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "keysound" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 void ODevice::touchSound ( )
 {
 
 #ifndef QT_NO_SOUND
 	static Sound snd ( "touchsound" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 
 QValueList <OLed> ODevice::ledList ( ) const
 {
 	return QValueList <OLed> ( );
 }
 
 QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const
 {
 	return QValueList <OLedState> ( );
 }
 
 OLedState ODevice::ledState ( OLed /*which*/ ) const
 {
 	return Led_Off;
 }
 
 bool ODevice::setLedState ( OLed /*which*/, OLedState /*st*/ )
 {
 	return false;
 }
 
 bool ODevice::hasLightSensor ( ) const
 {
 	return false;
 }
 
 int ODevice::readLightSensor ( )
 {
 	return -1;
 }
 
 int ODevice::lightSensorResolution ( ) const
 {
 	return 0;
 }
 
-//QValueList <int> ODevice::keyList ( ) const
-//{
-//	return QValueList <int> ( );
-//}
+const QValueList <ODeviceButton> &ODevice::buttons ( ) const
+{
+	return d-> m_buttons;
+}
+
+uint ODevice::buttonHoldTime ( ) const
+{
+	return d-> m_holdtime;
+}
+
+const ODeviceButton *ODevice::buttonForKeycode ( ushort code )
+{
+	for ( QValueListConstIterator<ODeviceButton> it = d-> m_buttons. begin ( ); it != d-> m_buttons. end ( ); ++it ) {
+		if ( (*it). keycode ( ) == code )
+			return &(*it);
+	}
+	return 0;
+}
+
+void ODevice::reloadButtonMapping ( )
+{
+	Config cfg ( "ButtonSettings" );
+	
+	for ( uint i = 0; i < d-> m_buttons. count ( ); i++ ) {
+		ODeviceButton &b = d-> m_buttons [i];
+		QString group = "Button" + QString::number ( i );
+
+		QCString pch, hch;
+		QCString pm, hm;
+		QByteArray pdata, hdata;
+		
+		if ( cfg. hasGroup ( group )) {
+			cfg. setGroup ( group );
+			pch = cfg. readEntry ( "PressedActionChannel" ). latin1 ( );
+			pm  = cfg. readEntry ( "PressedActionMessage" ). latin1 ( );
+			// pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" ));
+
+			hch = cfg. readEntry ( "HeldActionChannel" ). latin1 ( );
+			hm  = cfg. readEntry ( "HeldActionMessage" ). latin1 ( );
+			// hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" ));
+		}
+		
+		b. setPressedAction ( OQCopMessage ( pch, pm, pdata ));
+		b. setHeldAction ( OQCopMessage ( hch, hm, hdata ));
+	}
+}
+
+void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
+{
+	if ( button >= (int) d-> m_buttons. count ( ))
+		return;
+		
+	ODeviceButton &b = d-> m_buttons [button];
+    b. setPressedAction ( action );
+
+	Config buttonFile ( "ButtonSettings" );
+	buttonFile. setGroup ( "Button" + QString::number ( button ));
+	buttonFile. writeEntry ( "PressedActionChannel", (const char*) b. pressedAction ( ). channel ( ));
+	buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( ));
+
+//	buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( )));
+
+	QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
+}
+
+void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
+{
+	if ( button >= (int) d-> m_buttons. count ( ))
+		return;
+		
+	ODeviceButton &b = d-> m_buttons [button];
+    b. setHeldAction ( action );
+
+	Config buttonFile ( "ButtonSettings" );
+	buttonFile. setGroup ( "Button" + QString::number ( button ));
+	buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction ( ). channel ( ));
+	buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction ( ). message ( ));
+
+//	buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction ( ). data ( )));
+
+	QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
+}
+
 
 
 
 /**************************************************
  *
  * iPAQ
  *
  **************************************************/
 
 void iPAQ::init ( )
 {
 	d-> m_vendorstr = "HP";
 	d-> m_vendor = Vendor_HP;
 
 	QFile f ( "/proc/hal/model" );
 
 	if ( f. open ( IO_ReadOnly )) {
 		QTextStream ts ( &f );
 
 		d-> m_modelstr = "H" + ts. readLine ( );
 
 		if ( d-> m_modelstr == "H3100" )
 			d-> m_model = Model_iPAQ_H31xx;
 		else if ( d-> m_modelstr == "H3600" )
 			d-> m_model = Model_iPAQ_H36xx;
 		else if ( d-> m_modelstr == "H3700" )
 			d-> m_model = Model_iPAQ_H37xx;
 		else if ( d-> m_modelstr == "H3800" )
 			d-> m_model = Model_iPAQ_H38xx;
 		else if ( d-> m_modelstr == "H3900" )
 			d-> m_model = Model_iPAQ_H39xx;
 		else
 			d-> m_model = Model_Unknown;
 
 		f. close ( );
 	}
 
 	f. setName ( "/etc/familiar-version" );
 	if ( f. open ( IO_ReadOnly )) { 
 		d-> m_systemstr = "Familiar";
 		d-> m_system = System_Familiar;
 		
 		QTextStream ts ( &f );
 		d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 		
 		f. close ( );
 	}
 
 	m_leds [0] = m_leds [1] = Led_Off;
 	
 	m_power_timer = 0;
 	
+	for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
+		i_button *ib = ipaq_buttons + i;	
+		ODeviceButton b;
+		
+		qDebug ( "%d: %d", i, ib-> model );
+		
+		if (( ib-> model & d-> m_model ) == d-> m_model ) {		
+			b. setKeycode ( ib-> code );
+			b. setUserText ( qApp-> translate ( "Button", ib-> utext ));
+			b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
+			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
+			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
+                                        
+			d-> m_buttons. append ( b );
+			
+			qDebug ( "code: %d", ib-> code );
+		}
+	}
+	reloadButtonMapping ( );
+	
 	if ( d-> m_qwsserver )
 		QWSServer::setKeyboardFilter ( this );	
 }
 
 //#include <linux/h3600_ts.h>  // including kernel headers is evil ...
 
 typedef struct {
   unsigned char OffOnBlink;       /* 0=off 1=on 2=Blink */
   unsigned char TotalTime;        /* Units of 5 seconds */
   unsigned char OnTime;           /* units of 100m/s */
   unsigned char OffTime;          /* units of 100m/s */
 } LED_IN;
 
 typedef struct {
 	unsigned char mode;
 	unsigned char pwr;
 	unsigned char brightness;
 } FLITE_IN;
 
 #define LED_ON    OD_IOW( 'f', 5, LED_IN )
 #define FLITE_ON  OD_IOW( 'f', 7, FLITE_IN )
 
 
 
 QValueList <OLed> iPAQ::ledList ( ) const
 {
 	QValueList <OLed> vl;
 	vl << Led_Power;
 
 	if ( d-> m_model == Model_iPAQ_H38xx )
 		vl << Led_BlueTooth;
 	return vl;
 }
 
 QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const
 {
 	QValueList <OLedState> vl;
 
 	if ( l == Led_Power )
 		vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast;
 	else if ( l == Led_BlueTooth && d-> m_model == Model_iPAQ_H38xx )
 		vl << Led_Off; // << Led_On << ???
 		
 	return vl;
 }
 
 OLedState iPAQ::ledState ( OLed l ) const
 {	
 	switch ( l ) {
 		case Led_Power:
 			return m_leds [0];
 		case Led_BlueTooth:
 			return m_leds [1];
 		default:
 			return Led_Off;
 	}
 }
 
 bool iPAQ::setLedState ( OLed l, OLedState st ) 
 {
 	static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK );
 
 	if ( l == Led_Power ) {
 		if ( fd >= 0 ) {
 			LED_IN leds;
 			::memset ( &leds, 0, sizeof( leds ));
 			leds. TotalTime  = 0;
 			leds. OnTime     = 0;
 			leds. OffTime    = 1;
 			leds. OffOnBlink = 2;
 
 			switch ( st ) {
 				case Led_Off      : leds. OffOnBlink = 0; break;
 				case Led_On       : leds. OffOnBlink = 1; break;
 				case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
 				case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
 			}
 
 			if ( ::ioctl ( fd, LED_ON, &leds ) >= 0 ) {
 				m_leds [0] = st;
 				return true;
 			}
 		}
 	}
 	return false;
 }
 
 
-//QValueList <int> iPAQ::keyList ( ) const
-//{
-//	QValueList <int> vl;
-//	vl << HardKey_Datebook << HardKey_Contacts << ( model ( ) == Model_iPAQ_H38xx ? HardKey_Mail : HardKey_Menu ) << HardKey_Home << HardKey_Record << HardKey_Suspend << HardKey_Backlight;
-//	return vl;
-//}
-
 bool iPAQ::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
 	int newkeycode = keycode;
 
 	switch ( keycode ) {
 		// H38xx/H39xx have no "Q" key anymore - this is now the Mail key
 		case HardKey_Menu: {
 			if (( d-> m_model == Model_iPAQ_H38xx ) ||
 			    ( d-> m_model == Model_iPAQ_H39xx )) {			    
 				newkeycode = HardKey_Mail;
 			}
 			break;
 		}
 				
 		// Rotate cursor keys 180°
 		case Key_Left : 
 		case Key_Right: 
 		case Key_Up   : 
 		case Key_Down : {
 			if (( d-> m_model == Model_iPAQ_H31xx ) ||
 			    ( d-> m_model == Model_iPAQ_H38xx )) {			    
 				newkeycode = Key_Left + ( keycode - Key_Left + 2 ) % 4;
 			}
 			break;
 		}
 
 		// map Power Button short/long press to F34/F35
 		case Key_SysReq: {
 			if ( isPress ) {
 				if ( m_power_timer )
 					killTimer ( m_power_timer );
 				m_power_timer = startTimer ( 500 );
 			}
 			else if ( m_power_timer ) {
 				killTimer ( m_power_timer );
 				m_power_timer = 0;
 				QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, true, false );
 				QWSServer::sendKeyEvent ( -1, HardKey_Suspend, 0, false, false );
 			}
 			newkeycode = Key_unknown;	
 			break;	
 		}
 	}
 			
 	if ( newkeycode != keycode ) {
 		if ( newkeycode != Key_unknown )
 			QWSServer::sendKeyEvent ( -1, newkeycode, modifiers, isPress, autoRepeat );
 		return true;
 	}
 	else
 		return false;
 }
 
 void iPAQ::timerEvent ( QTimerEvent * )
 {
 	killTimer ( m_power_timer );
 	m_power_timer = 0;
 	QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
 	QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
 }
 
 
 void iPAQ::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "alarm" );
 	int fd;
 	int vol;
 	bool vol_reset = false;
 
 	if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
 		if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
 			Config cfg ( "qpe" );
 			cfg. setGroup ( "Volume" );
 
  			int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
 			if ( volalarm < 0 )
 				volalarm = 0;
 			else if ( volalarm > 100 )
 				volalarm = 100;
 			volalarm |= ( volalarm << 8 );
 
 			if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
 				vol_reset = true;
 		}
 	}
 
 	snd. play ( );
 	while ( !snd. isFinished ( ))
 		qApp-> processEvents ( );
 
 	if ( fd >= 0 ) {
 		if ( vol_reset )
 			::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
 		::close ( fd );
 	}
 #endif
 }
 
 
 bool iPAQ::setSoftSuspend ( bool soft )
 {
 	bool res = false;
 	int fd;
 	
 	if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
 		if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
 			res = true;
 		else
 			::perror ( "write to /proc/sys/ts/suspend_button_mode" );
 		
 		::close ( fd );
 	}
 	else
 		::perror ( "/proc/sys/ts/suspend_button_mode" );
 	
 	return res;
 }
 
 
 bool iPAQ::setDisplayBrightness ( int bright )
 {
 	bool res = false;
 	int fd;
 	
 	if ( bright > 255 )
 		bright = 255;
 	if ( bright < 0 )
 		bright = 0;
 
 	if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) {
 		FLITE_IN bl;
 		bl. mode = 1;
 		bl. pwr = bright ? 1 : 0;
 		bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255;
 		res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 );
 		::close ( fd );
 	}
 	return res;
 }
 
 int iPAQ::displayBrightnessResolution ( ) const
 {
 	switch ( model ( )) {
 		case Model_iPAQ_H31xx:
 		case Model_iPAQ_H36xx:
 		case Model_iPAQ_H37xx:
 			return 128;  	// really 256, but >128 could damage the LCD
 			
 		case Model_iPAQ_H38xx:
 		case Model_iPAQ_H39xx:
 			return 64;
 		
 		default:
 			return 2;
 	}	
 }
 
 
 bool iPAQ::hasLightSensor ( ) const
 {
 	return true;
 }
 
 int iPAQ::readLightSensor ( )
 {
 	int fd;
 	int val = -1;
 	
 	if (( fd = ::open ( "/proc/hal/light_sensor", O_RDONLY )) >= 0 ) {
 		char buffer [8];
 	
 		if ( ::read ( fd, buffer, 5 ) == 5 ) {
 			char *endptr;
 		
 			buffer [4] = 0;
 			val = ::strtol ( buffer + 2, &endptr, 16 );
 			
 			if ( *endptr != 0 )
 				val = -1;
 		}	
 		::close ( fd );
 	}
 
 	return val;
 }
 
 int iPAQ::lightSensorResolution ( ) const
 {
 	return 256;
 }
 
 /**************************************************
  *
  * Zaurus
  *
  **************************************************/
 
 
 
 void Zaurus::init ( )
 {
 	d-> m_vendorstr = "Sharp";
 	d-> m_vendor = Vendor_Sharp;
 
 	QFile f ( "/proc/filesystems" );
 
 	if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) {
 		d-> m_vendorstr = "OpenZaurus Team";
 		d-> m_systemstr = "OpenZaurus";
 		d-> m_system = System_OpenZaurus;
 
 		f. close ( );
 
 		f. setName ( "/etc/oz_version" );
 		if ( f. open ( IO_ReadOnly )) { 
 			QTextStream ts ( &f );
 			d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
 			f. close ( );
 		}
 	}
 	else {
 		d-> m_systemstr = "Zaurus";
 		d-> m_system = System_Zaurus;
 	}
 
 	f. setName ( "/proc/deviceinfo/product" );
 	if ( f. open ( IO_ReadOnly ) ) {
 		QTextStream ts ( &f );
 		QString model = ts. readLine ( );
 		f. close ( );
 		if ( model == "SL-5000D" ) {
 			d-> m_model = Model_Zaurus_SL5000;
 			d-> m_modelstr = "Zaurus SL-5000D";
 		} else if ( model == "SL-5500" ) {
 			d-> m_model = Model_Zaurus_SL5500;
 			d-> m_modelstr = "Zaurus SL-5500";
 		}
 	}
 	else {
 		d-> m_model = Model_Zaurus_SL5000;
 		d-> m_modelstr = "Zaurus SL-5000D (unverified)";
 	}
 
+	for ( uint i = 0; i < ( sizeof( z_buttons ) / sizeof( z_button )); i++ ) {
+		z_button *zb = z_buttons + i;	
+		ODeviceButton b;
+		
+		b. setKeycode ( zb-> code );
+		b. setUserText ( qApp-> translate ( "Button", zb-> utext ));
+		b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
+		b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), zb-> fpressedaction ));
+		b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), zb-> fheldaction ));
+                                        
+		d-> m_buttons. append ( b );
+	}
+	reloadButtonMapping ( );
+
 	m_leds [0] = Led_Off;
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
 #define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
 //#define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */
 //#define SHARP_PDA_ERRORSOUND       5  /* error occurred */
 //#define SHARP_PDA_CRITICALSOUND    6  /* critical error occurred */
 //#define SHARP_PDA_SYSSTARTSOUND    7  /* system start */
 //#define SHARP_PDA_SYSTEMENDSOUND   8  /* system shutdown */
 //#define SHARP_PDA_APPSTART         9  /* application start */
 //#define SHARP_PDA_APPQUIT         10  /* application ends */
 
 //#define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 //#define SHARP_BUZ_DAILY_ALARM     12  /* daily alarm */
 //#define SHARP_BUZ_GOT_PHONE_CALL  13  /* phone call sound */
 //#define SHARP_BUZ_GOT_MAIL        14  /* mail sound */
 //
 
 #define	SHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_LED_SETSTATUS   (SHARP_LED_IOCTL_START+1)
 
 typedef struct sharp_led_status {
   int which;   /* select which LED status is wanted. */
   int status;  /* set new led status if you call SHARP_LED_SETSTATUS */
 } sharp_led_status;
 
 #define SHARP_LED_MAIL_EXISTS  9       /* mail status (exists or not) */
 
 #define LED_MAIL_NO_UNREAD_MAIL  0   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_NEWMAIL_EXISTS  1   /* for SHARP_LED_MAIL_EXISTS */
 #define LED_MAIL_UNREAD_MAIL_EX  2   /* for SHARP_LED_MAIL_EXISTS */
 
 // #include <asm/sharp_apm.h> // including kernel headers is evil ...
 
 #define APM_IOCGEVTSRC          OD_IOR( 'A', 203, int )
 #define APM_IOCSEVTSRC          OD_IORW( 'A', 204, int )
 #define APM_EVT_POWER_BUTTON    (1 << 0)
 
 #define FL_IOCTL_STEP_CONTRAST    100
 
 
 void Zaurus::buzzer ( int sound )
 {
 	static int fd = ::open ( "/dev/sharp_buz", O_RDWR|O_NONBLOCK );
   
 	if ( fd >= 0 )
 		::ioctl ( fd, SHARP_BUZZER_MAKESOUND, sound );
 }
 
 
 void Zaurus::alarmSound ( ) 
 {
 	buzzer ( SHARP_BUZ_SCHEDULE_ALARM );
 }
 
 void Zaurus::touchSound ( ) 
 {
 	buzzer ( SHARP_BUZ_TOUCHSOUND );
 }
 
 void Zaurus::keySound ( ) 
 {
 	buzzer ( SHARP_BUZ_KEYSOUND );
 }
 
 
 QValueList <OLed> Zaurus::ledList ( ) const
 {
 	QValueList <OLed> vl;
 	vl << Led_Mail;
 	return vl;
 }
 
 QValueList <OLedState> Zaurus::ledStateList ( OLed l ) const
 {
 	QValueList <OLedState> vl;
 	
 	if ( l == Led_Mail )
 		vl << Led_Off << Led_On << Led_BlinkSlow;
 	return vl;
 }
 
 OLedState Zaurus::ledState ( OLed which ) const
 {
 	if ( which == Led_Mail )
 		return m_leds [0];
 	else	
 		return Led_Off;
 }
 
 bool Zaurus::setLedState ( OLed which, OLedState st )
 {
 	static int fd = ::open ( "/dev/sharp_led", O_RDWR|O_NONBLOCK ); 
 
 	if ( which == Led_Mail ) {
 		if ( fd >= 0 ) {
 			struct sharp_led_status leds;
 			::memset ( &leds, 0, sizeof( leds ));
 			leds. which = SHARP_LED_MAIL_EXISTS;
 			bool ok = true;
 			
 			switch ( st ) {
 				case Led_Off      : leds. status = LED_MAIL_NO_UNREAD_MAIL; break;
 				case Led_On       : leds. status = LED_MAIL_NEWMAIL_EXISTS; break;
 				case Led_BlinkSlow: leds. status = LED_MAIL_UNREAD_MAIL_EX; break;
 				default            : ok = false;
 			}
 		
 			if ( ok && ( ::ioctl ( fd, SHARP_LED_SETSTATUS, &leds ) >= 0 )) {
 				m_leds [0] = st;
 				return true;
 			}
 		}		
 	}
 	return false;
 }
 
 bool Zaurus::setSoftSuspend ( bool soft )
 {
 	bool res = false;
 	int fd;
 
 	if ((( fd = ::open ( "/dev/apm_bios", O_RDWR )) >= 0 ) ||
         (( fd = ::open ( "/dev/misc/apm_bios",O_RDWR )) >= 0 )) {
 
 		int sources = ::ioctl ( fd, APM_IOCGEVTSRC, 0 ); // get current event sources
 
 		if ( sources >= 0 ) {
 			if ( soft )
 				sources &= ~APM_EVT_POWER_BUTTON;
 			else
 				sources |= APM_EVT_POWER_BUTTON;
 
 			if ( ::ioctl ( fd, APM_IOCSEVTSRC, sources ) >= 0 ) // set new event sources
 				res = true;
 			else
 				perror ( "APM_IOCGEVTSRC" );
 		}
 		else
 			perror ( "APM_IOCGEVTSRC" );
 		
 		::close ( fd );
 	}
 	else
 		perror ( "/dev/apm_bios or /dev/misc/apm_bios" );
 		
     return res;
 }
 
 
 bool Zaurus::setDisplayBrightness ( int bright )
 {
 	bool res = false;
 	int fd;
 	
 	if ( bright > 255 )
 		bright = 255;
 	if ( bright < 0 )
 		bright = 0;
 	
 	if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
 		int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
 		if ( bright && !bl )
 			bl = 1;
 		res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
 		::close ( fd );
 	}
 	return res;
 }
 
 
 int Zaurus::displayBrightnessResolution ( ) const 
 {
 	return 5;
 }
 
 
diff --git a/libopie/odevice.h b/libopie/odevice.h
index 86491d4..ce62f1a 100644
--- a/libopie/odevice.h
+++ b/libopie/odevice.h
@@ -1,150 +1,194 @@
 /*  This file is part of the OPIE libraries
     Copyright (C) 2002 Robert Griebl (sandman@handhelds.org)
             
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Library General Public
     License as published by the Free Software Foundation; either
     version 2 of the License, or (at your option) any later version.
                              
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Library General Public License for more details.
                                           
     You should have received a copy of the GNU Library General Public License
     along with this library; see the file COPYING.LIB.  If not, write to
     the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
     Boston, MA 02111-1307, USA.
 */
 
 #ifndef _LIBOPIE_ODEVICE_H_
 #define _LIBOPIE_ODEVICE_H_
 
+#include <qobject.h>
 #include <qstring.h>
 #include <qnamespace.h>
 
+#include <opie/odevicebutton.h>
+
 class ODeviceData;
 
 namespace Opie {
 
 enum OModel {
 	Model_Unknown,
 	
 	Model_Series_Mask   = 0xff000000,
 
 	Model_iPAQ          = ( 1 << 24 ),
 
 	Model_iPAQ_All      = ( Model_iPAQ | 0xffffff ),
 	Model_iPAQ_H31xx    = ( Model_iPAQ | 0x000001 ),
 	Model_iPAQ_H36xx    = ( Model_iPAQ | 0x000002 ),
 	Model_iPAQ_H37xx    = ( Model_iPAQ | 0x000004 ),
 	Model_iPAQ_H38xx    = ( Model_iPAQ | 0x000008 ),
 	Model_iPAQ_H39xx    = ( Model_iPAQ | 0x000010 ),
 
 	Model_Zaurus        = ( 2 << 24 ),
 
 	Model_Zaurus_SL5000 = ( Model_Zaurus | 0x000001 ),
 	Model_Zaurus_SL5500 = ( Model_Zaurus | 0x000002 ),
 };
 
 enum OVendor {	
 	Vendor_Unknown,
 
 	Vendor_HP,
 	Vendor_Sharp
 };	
 
 enum OSystem {
 	System_Unknown,
 
 	System_Familiar,
 	System_Zaurus,
 	System_OpenZaurus
 };
 
 enum OLedState {
 	Led_Off,
 	Led_On,
 	Led_BlinkSlow,
 	Led_BlinkFast
 };
 
 enum OLed {
 	Led_Mail,
 	Led_Power,
 	Led_BlueTooth
 };
 
 enum OHardKey {
 	HardKey_Datebook  = Qt::Key_F9,
 	HardKey_Contacts  = Qt::Key_F10,
 	HardKey_Menu      = Qt::Key_F11,
 	HardKey_Home      = Qt::Key_F12,
 	HardKey_Mail      = Qt::Key_F14,
 	HardKey_Record    = Qt::Key_F24,
 	HardKey_Suspend   = Qt::Key_F34,
 	HardKey_Backlight = Qt::Key_F35,
 };
 
 
-class ODevice
-{
+class ODevice : public QObject {
+	Q_OBJECT
+	
 private:
 	ODevice ( const ODevice & );
 
 protected:
 	ODevice ( );
 	virtual void init ( );
 	
 	ODeviceData *d;
 
 public:
 	virtual ~ODevice ( );
 
 	static ODevice *inst ( );
 
 
 
 // information
 
 	QString modelString ( ) const; 
 	OModel model ( ) const;
 	inline OModel series ( ) const { return (OModel) ( model ( ) & Model_Series_Mask ); }
 	
 	QString vendorString ( ) const;
 	OVendor vendor ( ) const;
 
 	QString systemString ( ) const;
 	OSystem system ( ) const;
 
 	QString systemVersionString ( ) const;
 
 // system	
 
 	virtual bool setSoftSuspend ( bool on );
 	virtual bool suspend ( );
 
 	virtual bool setDisplayStatus ( bool on );
 	virtual bool setDisplayBrightness ( int brightness );
 	virtual int displayBrightnessResolution ( ) const;
 	
 // input / output
 
 	virtual void alarmSound ( );
 	virtual void keySound ( );
 	virtual void touchSound ( );
 
 	virtual QValueList <OLed> ledList ( ) const;
 	virtual QValueList <OLedState> ledStateList ( OLed led ) const;
 	virtual OLedState ledState ( OLed led ) const;
 	virtual bool setLedState ( OLed led, OLedState st );
 
 	virtual bool hasLightSensor ( ) const;
 	virtual int readLightSensor ( );
 	virtual int lightSensorResolution ( ) const;
+
+	/**
+	 * Returns the available buttons on this device.  The number and location
+	 * of buttons will vary depending on the device.  Button numbers will be assigned
+	 * by the device manufacturer and will be from most preferred button to least preffered
+	 * button.  Note that this list only contains "user mappable" buttons.
+	 */
+	const QValueList<ODeviceButton> &buttons ( ) const;
+	
+	/**
+	 * Returns the DeviceButton for the \a keyCode.  If \a keyCode is not found, it
+	 * returns 0L
+	 */
+	const ODeviceButton *buttonForKeycode ( ushort keyCode );
+
+	/**
+	 * Reassigns the pressed action for \a button.  To return to the factory
+	 * default pass an empty string as \a qcopMessage.
+	 */
+	void remapPressedAction ( int button, const OQCopMessage &qcopMessage );
+
+	/**
+	 * Reassigns the held action for \a button.  To return to the factory
+	 * default pass an empty string as \a qcopMessage.
+	 */	 
+	void remapHeldAction ( int button, const OQCopMessage &qcopMessage );
+
+	/**
+	 * How long (in ms) you have to press a button for a "hold" action
+	 */
+	uint buttonHoldTime ( ) const;
+
+signals:	
+	void buttonMappingChanged ( );
+	
+private slots:	
+	void systemMessage ( const QCString &, const QByteArray & );
+	
+protected:
+	void reloadButtonMapping ( );
 };
 
 }
 
 #endif
 
diff --git a/libopie/odevicebutton.cpp b/libopie/odevicebutton.cpp
new file mode 100644
index 0000000..2270343
--- a/dev/null
+++ b/libopie/odevicebutton.cpp
@@ -0,0 +1,234 @@
+/**********************************************************************
+** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
+**
+** This file is part of the Qtopia Environment.
+**
+** This file may be distributed and/or modified under the terms of the
+** GNU General Public License version 2 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.
+**
+** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+**
+** See http://www.trolltech.com/gpl/ for GPL licensing information.
+**
+** Contact info@trolltech.com if any conditions of this licensing are
+** not clear to you.
+**
+**********************************************************************/
+
+#include <qpixmap.h>
+#include <qstring.h>
+
+#include <qpe/qcopenvelope_qws.h>
+#include <opie/odevicebutton.h>
+
+using namespace Opie;
+
+
+class OQCopMessageData {
+public:	
+	QCString m_channel;
+	QCString m_message;
+	QByteArray m_data;
+};
+
+
+OQCopMessage::OQCopMessage ( ) 
+	: d ( 0 )
+{
+	init ( QCString ( ), QCString ( ), QByteArray ( ));
+}
+
+OQCopMessage::OQCopMessage ( const OQCopMessage &copy ) 
+	: d ( 0 )
+{
+	init ( copy. channel ( ), copy. message ( ), copy. data ( ));
+}
+
+OQCopMessage &OQCopMessage::operator = ( const OQCopMessage &assign )
+{
+	init ( assign. channel ( ), assign. message ( ), assign. data ( ));
+	return *this;
+}
+
+OQCopMessage::OQCopMessage ( const QCString &ch, const QCString &m, const QByteArray &arg ) 
+	: d ( 0 )
+{
+	init ( ch, m, arg );
+}
+
+void OQCopMessage::init ( const QCString &ch, const QCString &m, const QByteArray &arg )
+{
+	if ( !d )
+		d = new OQCopMessageData ( );
+	d-> m_channel = ch;
+	d-> m_message = m;
+	d-> m_data = arg;
+}
+
+bool OQCopMessage::send ( )
+{
+	if ( d-> m_channel. isEmpty ( ) || d-> m_message. isEmpty ( ))
+		return false;
+
+	QCopEnvelope e ( d-> m_channel, d-> m_message );
+	
+	if ( d-> m_data. size ( ))
+		e. writeRawBytes ( d-> m_data. data ( ), d-> m_data. size ( ));
+
+	return true;
+}
+
+QCString OQCopMessage::channel ( ) const
+{
+	return d-> m_channel;
+}
+
+QCString OQCopMessage::message ( ) const
+{
+	return d-> m_message;
+}
+
+QByteArray OQCopMessage::data ( ) const
+{
+	return d-> m_data;
+}
+
+void OQCopMessage::setChannel ( const QCString &ch )
+{
+	d-> m_channel = ch;
+}
+
+void OQCopMessage::setMessage ( const QCString &m )
+{
+	d-> m_message = m;
+}
+
+void OQCopMessage::setData ( const QByteArray &data )
+{
+	d-> m_data = data;
+}
+
+/*! \class ODeviceButton
+    \brief The ODeviceButton class represents a physical user mappable button on a Qtopia device.
+
+    This class represents a physical button on a Qtopia device.    A
+    device may have "user programmable" buttons.
+    The location and number of buttons will vary from device to
+    device.    userText() and pixmap() may be used to describe this button
+    to the user in help documentation.
+
+    \ingroup qtopiaemb
+    \internal
+*/
+
+ODeviceButton::ODeviceButton()
+{
+}
+
+ODeviceButton::~ODeviceButton()
+{
+}
+
+/*!
+ Returns the button's keycode.
+ */
+ushort ODeviceButton::keycode() const
+{
+    return m_Keycode;
+}
+
+
+/*!
+ This function returns a human readable, translated description of the button.
+ */
+QString ODeviceButton::userText() const
+{
+    return m_UserText;
+}
+
+/*!
+ This function returns the pixmap for this button.    If there isn't one
+ it will return an empty (null) pixmap.
+ */
+QPixmap ODeviceButton::pixmap() const
+{
+    return m_Pixmap;
+}
+
+/*!
+ This function returns the factory preset (default) action for when this button
+ is pressed.    The return value is a legal QCop message.
+ */
+OQCopMessage ODeviceButton::factoryPresetPressedAction() const
+{
+    return m_FactoryPresetPressedAction;
+}
+
+/*!
+ This function returns the user assigned action for when this button is pressed.
+ If no action is assigned, factoryPresetAction() is returned.
+ */
+OQCopMessage ODeviceButton::pressedAction() const
+{
+    if (m_PressedAction.channel().isEmpty())
+	return factoryPresetPressedAction();
+    return m_PressedAction;
+}
+
+/*!
+ This function returns the factory preset (default) action for when this button
+ is pressed and held.    The return value is a legal QCop message.
+ */
+OQCopMessage ODeviceButton::factoryPresetHeldAction() const
+{
+    return m_FactoryPresetHeldAction;
+}
+
+/*!
+ This function returns the user assigned action for when this button is pressed
+ and held. If no action is assigned, factoryPresetAction() is returned.
+ */
+OQCopMessage ODeviceButton::heldAction() const
+{
+    if (m_HeldAction.channel().isEmpty())
+	return factoryPresetHeldAction();
+    return m_HeldAction;
+}
+
+void ODeviceButton::setKeycode(ushort keycode)
+{
+    m_Keycode = keycode;
+}
+
+void ODeviceButton::setUserText(const QString& text)
+{
+    m_UserText = text;
+}
+
+void ODeviceButton::setPixmap(const QPixmap& picture)
+{
+    m_Pixmap = picture;
+}
+
+void ODeviceButton::setFactoryPresetPressedAction(const OQCopMessage& action)
+{
+    m_FactoryPresetPressedAction = action;
+}
+
+void ODeviceButton::setPressedAction(const OQCopMessage& action)
+{
+    m_PressedAction = action;
+}
+
+void ODeviceButton::setFactoryPresetHeldAction(const OQCopMessage& action)
+{
+    m_FactoryPresetHeldAction = action;
+}
+
+void ODeviceButton::setHeldAction(const OQCopMessage& action)
+{
+    m_HeldAction = action;
+}
diff --git a/libopie/odevicebutton.h b/libopie/odevicebutton.h
new file mode 100644
index 0000000..5281ab2
--- a/dev/null
+++ b/libopie/odevicebutton.h
@@ -0,0 +1,97 @@
+/**********************************************************************
+** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
+**
+** This file is part of the Qtopia Environment.
+**
+** This file may be distributed and/or modified under the terms of the
+** GNU General Public License version 2 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.
+**
+** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+**
+** See http://www.trolltech.com/gpl/ for GPL licensing information.
+**
+** Contact info@trolltech.com if any conditions of this licensing are
+** not clear to you.
+**
+**********************************************************************/
+#ifndef DEVICE_BUTTON_H
+#define DEVICE_BUTTON_H
+
+#include <qpixmap.h>
+#include <qstring.h>
+
+class OQCopMessageData;
+
+namespace Opie
+{
+
+class OQCopMessage {
+public:
+	OQCopMessage ( );
+	OQCopMessage ( const OQCopMessage &copy );
+	OQCopMessage ( const QCString &m_channel, const QCString &message, const QByteArray &args = QByteArray ( ));
+
+	OQCopMessage &operator = ( const OQCopMessage &assign );
+
+	void setChannel ( const QCString &channel );
+	void setMessage ( const QCString &message );
+	void setData ( const QByteArray &ba );
+
+	QCString channel ( ) const;
+	QCString message ( ) const;
+	QByteArray data ( ) const;
+
+	bool send ( );
+
+private:
+	void init ( const QCString &m_channel, const QCString &message, const QByteArray &args );
+
+	OQCopMessageData *d;
+};
+
+
+/**
+ * This class represents a physical button on a Qtopia device.  A device may
+ * have n "user programmable" buttons, which are number 1..n.  The location
+ * and number of buttons will vary from device to device.  userText() and pixmap()
+ * may be used to describe this button to the user in help documentation.
+ */
+
+class ODeviceButton
+{
+public:
+	ODeviceButton();
+	virtual ~ODeviceButton();
+
+	ushort keycode ( ) const;
+	QString userText ( ) const;
+	QPixmap pixmap ( ) const;
+	OQCopMessage factoryPresetPressedAction ( ) const;
+	OQCopMessage pressedAction ( ) const;
+	OQCopMessage factoryPresetHeldAction ( ) const;
+	OQCopMessage heldAction ( ) const;
+
+	void setKeycode ( ushort keycode );
+	void setUserText ( const QString& text );
+	void setPixmap ( const QPixmap& picture );
+	void setFactoryPresetPressedAction ( const OQCopMessage& qcopMessage );
+	void setPressedAction ( const OQCopMessage& qcopMessage );
+	void setFactoryPresetHeldAction ( const OQCopMessage& qcopMessage );
+	void setHeldAction ( const OQCopMessage& qcopMessage );
+
+private:
+	ushort m_Keycode;
+	QString m_UserText;
+	QPixmap m_Pixmap;
+	OQCopMessage m_FactoryPresetPressedAction;
+	OQCopMessage m_PressedAction;
+	OQCopMessage m_FactoryPresetHeldAction;
+	OQCopMessage m_HeldAction;
+};
+
+}
+
+#endif