-FlowControl and LineTermination are saved and activated by numerical

 value now. This makes it work across different translations
-Switch code to use new PPPData::enter() and PPPData::flowcontrol()

6 files changed, 45 insertions, 44 deletions

diff --git a/noncore/settings/networksettings/ppp/connect.cpp b/noncore/settings/networksettings/ppp/connect.cpp
index 128877a..8981e01 100644
--- a/noncore/settings/networksettings/ppp/connect.cpp
+++ b/noncore/settings/networksettings/ppp/connect.cpp
@@ -1206,26 +1206,26 @@ bool ConnectWidget::execppp() {
     else {
       command += " ";
       command += ":";
     }
 
     if(_ifaceppp->data()->gateway() != "0.0.0.0")
       command += _ifaceppp->data()->gateway();
   }
 
   if(_ifaceppp->data()->subnetmask() != "0.0.0.0")
     command += " netmask " + _ifaceppp->data()->subnetmask();
 
-  if(_ifaceppp->data()->flowcontrol() != "None") {
-    if(_ifaceppp->data()->flowcontrol() == "CRTSCTS")
+  if(_ifaceppp->data()->flowcontrol() != PPPData::FlowNone) {
+      if(_ifaceppp->data()->flowcontrol() == PPPData::FlowHardware)
       command += " crtscts";
     else
       command += " xonxoff";
   }
 
   if(_ifaceppp->data()->defaultroute())
     command += " defaultroute";
 
   if(_ifaceppp->data()->autoDNS())
     command += " usepeerdns";
 
 
diff --git a/noncore/settings/networksettings/ppp/general.cpp b/noncore/settings/networksettings/ppp/general.cpp
index 5e2a04f..9457173 100644
--- a/noncore/settings/networksettings/ppp/general.cpp
+++ b/noncore/settings/networksettings/ppp/general.cpp
@@ -183,35 +183,28 @@ ModemWidget::ModemWidget( PPPData *pd, QWidget *parent, const char *name )
     tl->addWidget(baud_c, 4, 1);
 
     tmp = tr("Specifies the speed your modem and the serial\n"
              "port talk to each other. You should begin with\n"
              "the default of 38400 bits/sec. If everything\n"
              "works you can try to increase this value, but to\n"
              "no more than 115200 bits/sec (unless you know\n"
              "that your serial port supports higher speeds).");
 
     QWhatsThis::add(baud_label,tmp);
     QWhatsThis::add(baud_c,tmp);
 
-    for(int i=0; i <= enter->count()-1; i++)
-    {
-        if(_pppdata->enter() == enter->text(i))
-            enter->setCurrentItem(i);
-    }
-
     tl->addRowSpacing(5, 10);
 
     //Modem Lock File
     modemlockfile = new QCheckBox(tr("&Use lock file"), this);
-
     modemlockfile->setChecked(_pppdata->modemLockFile());
     //   connect(modemlockfile, SIGNAL(toggled(bool)),
     //           SLOT(modemlockfilechanged(bool)));
     tl->addMultiCellWidget(modemlockfile, 6, 6, 0, 1);
     //  l12->addStretch(1);
     QWhatsThis::add(modemlockfile,
                         tr("<p>To prevent other programs from accessing the\n"
                            "modem while a connection is established, a\n"
                            "file can be created to indicate that the modem\n"
                            "is in use. On Linux an example file would be\n"
                            "<tt>/var/lock/LCK..ttyS1</tt>\n"
                            "Here you can select whether this locking will\n"
@@ -231,42 +224,33 @@ ModemWidget::ModemWidget( PPPData *pd, QWidget *parent, const char *name )
     //   connect(modemtimeout, SIGNAL(valueChanged(int)),
     // 	  SLOT(modemtimeoutchanged(int)));
     timeoutLayout->addWidget(timeoutlabel);
     timeoutLayout->addWidget(modemtimeout);
     tl->addMultiCellLayout(timeoutLayout, 7, 7, 0, 1);
 
     QWhatsThis::add(modemtimeout,
                         tr("This specifies how long <i>kppp</i> waits for a\n"
                            "<i>CONNECT</i> response from your modem. The\n"
                            "recommended value is 30 seconds."));
 
     //set stuff from gpppdata
-    for(int i=0; i <= enter->count()-1; i++)
-    {
-        if(_pppdata->enter() == enter->text(i))
-            enter->setCurrentItem(i);
-    }
+    enter->setCurrentItem( static_cast<int>(_pppdata->enter()) );
+    flowcontrol->setCurrentItem( static_cast<int>( _pppdata->flowcontrol() ) );
 
     for(int i=0; i <= modemdevice->count()-1; i++)
     {
         if(_pppdata->modemDevice() == modemdevice->text(i))
             modemdevice->setCurrentItem(i);
     }
 
-    for(int i=0; i <= flowcontrol->count()-1; i++)
-    {
-        if(_pppdata->flowcontrol() == flowcontrol->text(i))
-            flowcontrol->setCurrentItem(i);
-    }
-
     //set the modem speed
     for(int i=0; i < baud_c->count(); i++)
         if(baud_c->text(i) == _pppdata->speed())
             baud_c->setCurrentItem(i);
 
     tl->setRowStretch(1, 1);
 }
 
 ModemWidget::~ModemWidget()
 {
     QStringList devs;
 
@@ -329,55 +313,57 @@ ModemWidget::~ModemWidget()
 
 
 
 bool ModemWidget::save()
 {
     //first check to make sure that the device name is unique!
     if(modemname->text().isEmpty() ||
             !_pppdata->isUniqueDevname(modemname->text()))
         return false;
 
     _pppdata->setDevname( modemname->text() );
     _pppdata->setModemDevice( modemdevice->currentText() );
-    _pppdata->setFlowcontrol(flowcontrol->currentText());
-    _pppdata->setFlowcontrol(flowcontrol->currentText());
+    _pppdata->setFlowcontrol(static_cast<PPPData::FlowControl>(flowcontrol->currentItem()));
+    _pppdata->setEnter( static_cast<PPPData::LineTermination>(enter->currentItem()));
     _pppdata->setSpeed(baud_c->currentText());
     _pppdata->setModemLockFile( modemlockfile->isChecked());
     _pppdata->setModemTimeout( modemtimeout->value() );
     return true;
 
 }
 
 void ModemWidget::slotBeforeModemQuery()
 {
     m_oldModemDev     = _pppdata->modemDevice();
-    m_oldFlowControl  = _pppdata->flowcontrol();
+    m_oldFlowControl  = static_cast<int>( _pppdata->flowcontrol() );
     m_oldSpeed        = _pppdata->speed();
     m_oldModemLock    = _pppdata->modemLockFile();
     m_oldModemTimeout = _pppdata->modemTimeout();
+    m_oldLineEnd      = static_cast<int>( _pppdata->enter() );
 
 
     _pppdata->setModemDevice( modemdevice->currentText() );
-    _pppdata->setFlowcontrol(flowcontrol->currentText());
-    _pppdata->setFlowcontrol(flowcontrol->currentText());
+    _pppdata->setFlowcontrol(static_cast<PPPData::FlowControl>(flowcontrol->currentItem()));
+    _pppdata->setEnter(static_cast<PPPData::LineTermination>(enter->currentItem()));
     _pppdata->setSpeed(baud_c->currentText());
     _pppdata->setModemLockFile( modemlockfile->isChecked());
     _pppdata->setModemTimeout( modemtimeout->value() );
 }
 
 
 void ModemWidget::slotAfterModemQuery()
 {
     _pppdata->setModemDevice( m_oldModemDev );
-    _pppdata->setFlowcontrol( m_oldFlowControl );
+    _pppdata->setFlowcontrol( static_cast<PPPData::FlowControl>(m_oldFlowControl) );
+    _pppdata->setEnter( static_cast<PPPData::LineTermination>(m_oldLineEnd) );
     _pppdata->setSpeed( m_oldSpeed );
     _pppdata->setModemLockFile( m_oldModemLock );
     _pppdata->setModemTimeout( m_oldModemTimeout );
 }
 
 
 ModemWidget2::ModemWidget2( PPPData *pd, InterfacePPP *ip, QWidget *parent,
                             const char *name)
         : QWidget(parent, name), _pppdata(pd), _ifaceppp(ip)
 {
     QVBoxLayout *l1 = new QVBoxLayout(this, 0 );//, KDialog::spacingHint());
 
diff --git a/noncore/settings/networksettings/ppp/general.h b/noncore/settings/networksettings/ppp/general.h
index a4dece4..0bb3136 100644
--- a/noncore/settings/networksettings/ppp/general.h
+++ b/noncore/settings/networksettings/ppp/general.h
@@ -72,27 +72,27 @@ private:
   QLineEdit     *modemname;
   QComboBox 	*modemdevice;
   QComboBox 	*flowcontrol;
 
   QComboBox *baud_c;
   QLabel *baud_label;
 
   QSpinBox 	*modemtimeout;
   QCheckBox     *modemlockfile;
   PPPData *_pppdata;
 
 private:
-    QString m_oldModemDev, m_oldFlowControl, m_oldSpeed;
+    QString m_oldModemDev, m_oldSpeed;
     bool m_oldModemLock;
-    int m_oldModemTimeout;
+    int m_oldModemTimeout, m_oldFlowControl, m_oldLineEnd;
 };
 
 
 class ModemWidget2 : public QWidget {
   Q_OBJECT
 public:
   ModemWidget2( PPPData*, InterfacePPP*, QWidget *parent=0, const char *name=0 );
   bool save();
 
 signals:
     void sig_beforeQueryModem();
     void sig_afterQueryModem();
diff --git a/noncore/settings/networksettings/ppp/modem.cpp b/noncore/settings/networksettings/ppp/modem.cpp
index 79f015b..7b2e2a3 100644
--- a/noncore/settings/networksettings/ppp/modem.cpp
+++ b/noncore/settings/networksettings/ppp/modem.cpp
@@ -216,26 +216,26 @@ bool Modem::opentty() {
   tty.c_cc[VTIME] = 0;
   tty.c_oflag = 0;
   tty.c_lflag = 0;
 
   tty.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
   tty.c_cflag |= CS8 | CREAD;
   tty.c_cflag |= CLOCAL;                   // ignore modem status lines
   tty.c_iflag = IGNBRK | IGNPAR /* | ISTRIP */ ;
   tty.c_lflag &= ~ICANON;                  // non-canonical mode
   tty.c_lflag &= ~(ECHO|ECHOE|ECHOK|ECHOKE);
 
 
-  if(_pppdata->flowcontrol() != "None") {
-      if(_pppdata->flowcontrol() == "CRTSCTS") {
+  if(_pppdata->flowcontrol() != PPPData::FlowNone) {
+      if(_pppdata->flowcontrol() == PPPData::FlowHardware) {
       tty.c_cflag |= CRTSCTS;
     }
     else {
       tty.c_iflag |= IXON | IXOFF;
       tty.c_cc[VSTOP]  = 0x13; /* DC3 = XOFF = ^S */
       tty.c_cc[VSTART] = 0x11; /* DC1 = XON  = ^Q */
     }
   }
   else {
     tty.c_cflag &= ~CRTSCTS;
     tty.c_iflag &= ~(IXON | IXOFF);
   }
@@ -346,33 +346,37 @@ bool Modem::writeChar(unsigned char c) {
     }
   } while(s == 0);
 
   return true;
 }
 
 
 bool Modem::writeLine(const char *buf) {
   int len = strlen(buf);
   char *b = new char[len+2];
   memcpy(b, buf, len);
   // different modems seem to need different line terminations
-  QString term = _pppdata->enter();
-  if(term == "LF")
+  switch( _pppdata->enter() ) {
+  case PPPData::EndLF:
     b[len++]='\n';
-  else if(term == "CR")
+    break;
+  case PPPData::EndCR:
     b[len++]='\r';
-  else if(term == "CR/LF") {
+    break;
+  case PPPData::EndCRLF:
     b[len++]='\r';
     b[len++]='\n';
+    break;
   }
+
   int l = len;
   while(l) {
     int wr = write(modemfd, &b[len-l], l);
     if(wr < 0) {
       // TODO do something meaningful with the error code (or ignore it
       oerr << "write() in Modem::writeLine failed" << oendl;
       delete[] b;
       return false;
     }
     l -= wr;
   }
   delete[] b;
diff --git a/noncore/settings/networksettings/ppp/pppdata.cpp b/noncore/settings/networksettings/ppp/pppdata.cpp
index eb03ef4..1491ea2 100644
--- a/noncore/settings/networksettings/ppp/pppdata.cpp
+++ b/noncore/settings/networksettings/ppp/pppdata.cpp
@@ -378,30 +378,30 @@ const QString PPPData::modemDevice() {
 //     _modemName = n;
 //     writeConfig(modemGroup(), MODEMNAME_KEY, n);
 //     return true; //FIXME
 // }
 
 bool PPPData::setModemDevice(const QString &n) {
     odebug << "Setting modem dev to >" << n.latin1() << "<" << oendl; 
     writeConfig(modemGroup(), MODEMDEV_KEY, n);
     return true; //FIXME
 }
 
 
-const QString PPPData::flowcontrol() {
-  return readConfig(modemGroup(), FLOWCONTROL_KEY, "CRTSCTS");
+enum PPPData::FlowControl PPPData::flowcontrol() {
+  return static_cast<FlowControl>(readNumConfig(modemGroup(), FLOWCONTROL_KEY, FlowHardware));
 }
 
 
-void PPPData::setFlowcontrol(const QString &n) {
+void PPPData::setFlowcontrol(enum FlowControl n) {
   writeConfig(modemGroup(), FLOWCONTROL_KEY, n);
 }
 
 
 const QString PPPData::speed() {
   QString s = readConfig(modemGroup(), SPEED_KEY, "57600");
   // undo the damage of a bug in former versions. It left an empty Speed=
   // entry in kppprc. kppp did set the serial port to 57600 as default but
   // pppd wouldn't receive the speed via the command line.
   if(s.toUInt() == 0)
     s = "57600";
   return s;
@@ -711,30 +711,30 @@ void PPPData::setModemRingResp(const QString &n) {
 
 
 const QString PPPData::modemAnswerResp() {
   return readConfig(modemGroup(), ANSWERRESP_KEY, "CONNECT");
 }
 
 
 void PPPData::setModemAnswerResp(const QString &n) {
   writeConfig(modemGroup(), ANSWERRESP_KEY, n);
 }
 
 
-const QString PPPData::enter() {
-  return readConfig(modemGroup(), ENTER_KEY, "CR");
+enum PPPData::LineTermination PPPData::enter(){
+    return static_cast<PPPData::LineTermination>(readNumConfig(modemGroup(), ENTER_KEY, EndCR));
 }
 
 
-void PPPData::setEnter(const QString &n) {
+void PPPData::setEnter(enum PPPData::LineTermination n) {
   writeConfig(modemGroup(), ENTER_KEY, n);
 }
 
 
 //
 // functions to set/return account information
 //
 
 //returns number of accounts
 int PPPData::count() const {
   return highcount + 1;
 }
diff --git a/noncore/settings/networksettings/ppp/pppdata.h b/noncore/settings/networksettings/ppp/pppdata.h
index d1cbeb5..d731b62 100644
--- a/noncore/settings/networksettings/ppp/pppdata.h
+++ b/noncore/settings/networksettings/ppp/pppdata.h
@@ -156,24 +156,35 @@ class Config;
 #define ACOUNTS_ACC        "Accounts_Account"
 
 #define DEVICESNAMES_LIST  "DevicesNames_List"
 #define DEVICES_LIST       "Devices_List"
 #define DEVICES_LIST_SEP   ','
 
 class PPPData {
 public:
     PPPData();
     ~PPPData() {};
 
     enum { NumInitStrings = 2 };
+    enum LineTermination {
+        EndCR,
+        EndLF,
+        EndCRLF
+    };
+
+    enum FlowControl {
+        FlowHardware,
+        FlowSoftware,
+        FlowNone
+    };
 
     // general functions
     void save();
     void cancel();
 
     QStringList getAccountList();
 
     static QMap<QString,QString> getConfiguredInterfaces();
     static void setConfiguredInterfaces( QMap<QString,QString> );
 
     // function to read/write date to configuration file
     static Config config();
@@ -213,26 +224,26 @@ public:
   void set_show_log_window(bool set);
   bool get_show_log_window();
 
   void set_automatic_redial(bool set);
   bool automatic_redial();
 
 //   void set_iconify_on_connect(bool set);
 //   bool get_iconify_on_connect();
 
 //   void set_dock_into_panel(bool set);
 //   bool get_dock_into_panel();
 
-  const QString enter();
-  void setEnter(const QString &);
+  enum LineTermination enter();
+  void setEnter(enum LineTermination);
 
   QString pppdVersion();
   bool pppdVersionMin(int ver, int mod, int patch);
 
   int pppdTimeout();
   void setpppdTimeout(int);
 
   int busyWait();
   void setbusyWait(int);
 
   bool modemLockFile();
   void setModemLockFile(bool set);
@@ -244,26 +255,26 @@ public:
   const QString modemEscapeStr();
 
   void setModemEscapeResp(const QString &);
   const QString modemEscapeResp();
 
 //  const QString modemName();
 //  bool setModemName(const QString &);
 //  bool changeModemName(const QString &);
 
    const QString modemDevice();
    bool setModemDevice(const QString &);
 
-  const QString flowcontrol();
-  void setFlowcontrol(const QString &);
+  enum FlowControl flowcontrol();
+  void setFlowcontrol(enum FlowControl);
 
   int modemTimeout();
   void setModemTimeout(int);
 
   int modemToneDuration();
   void setModemToneDuration(int);
 
   QString volumeInitString();
   int volume();
   void setVolume(int);
 
   int waitForDialTone();