add the virtual hook in HEAD as well

2 files changed, 5 insertions, 1 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index d6e6892..993aedf 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -660,392 +660,394 @@ QString ODevice::systemVersionString ( ) const
  *  @return the current Transformation
  */
 Transformation ODevice::rotation ( ) const
 {
 	return d-> m_rotation;
 }
 
 /**
  *  @return the current rotation direction
  */
 ODirection ODevice::direction ( ) const
 {
 	return d-> m_direction;
 }
 
 /**
  * This plays an alarmSound
  */
 void ODevice::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "alarm" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 /**
  * This plays a key sound
  */
 void ODevice::keySound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "keysound" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 /**
  * This plays a touch sound
  */
 void ODevice::touchSound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "touchsound" );
 
 	if ( snd. isFinished ( ))
 		snd. play ( );
 #endif
 }
 
 /**
  * This method will return a list of leds
  * available on this device
  * @return a list of LEDs.
  */
 QValueList <OLed> ODevice::ledList ( ) const
 {
 	return QValueList <OLed> ( );
 }
 
 /**
  * This does return the state of the LEDs
  */
 QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const
 {
 	return QValueList <OLedState> ( );
 }
 
 /**
  * @return the state for a given OLed
  */
 OLedState ODevice::ledState ( OLed /*which*/ ) const
 {
 	return Led_Off;
 }
 
 /**
  * Set the state for a LED
  * @param which Which OLed to use
  * @param st The state to set
  * @return success or failure
  */
 bool ODevice::setLedState ( OLed which, OLedState st )
 {
         Q_UNUSED( which )
         Q_UNUSED( st    )
 	return false;
 }
 
 /**
  * @return if the device has a light sensor
  */
 bool ODevice::hasLightSensor ( ) const
 {
 	return false;
 }
 
 /**
  * @return a value from the light senso
  */
 int ODevice::readLightSensor ( )
 {
 	return -1;
 }
 
 /**
  * @return the light sensor resolution whatever that is ;)
  */
 int ODevice::lightSensorResolution ( ) const
 {
 	return 0;
 }
 
 /**
  * @return a list with CPU frequencies supported by the hardware
  */
 const QStrList &ODevice::allowedCpuFrequencies ( ) const
 {
 	return *d->m_cpu_frequencies;
 }
 
 
 /**
  * Set desired CPU frequency
- * 
+ *
  * @param index index into d->m_cpu_frequencies of the frequency to be set
  */
 bool ODevice::setCurrentCpuFrequency(uint index)
 {
 	if (index >= d->m_cpu_frequencies->count())
 		return false;
 
 	char *freq = d->m_cpu_frequencies->at(index);
 	qWarning("set freq to %s", freq);
 
 	int fd;
 
 	if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) {
 		char writeCommand[50];
 		const int count = sprintf(writeCommand, "%s\n", freq);
 		int res = (::write(fd, writeCommand, count) != -1);
 		::close(fd);
 		return res;
 	}
 
 	return false;
 }
 
 
 /**
  * @return a list of hardware buttons
  */
 const QValueList <ODeviceButton> &ODevice::buttons ( )
 {
 	initButtons ( );
 
 	return *d-> m_buttons;
 }
 
 /**
  * @return The amount of time that would count as a hold
  */
 uint ODevice::buttonHoldTime ( ) const
 {
 	return d-> m_holdtime;
 }
 
 /**
  * This method return a ODeviceButton for a key code
  * or 0 if no special hardware button is available for the device
  *
  * @return The devicebutton or 0l
  * @see ODeviceButton
  */
 const ODeviceButton *ODevice::buttonForKeycode ( ushort code )
 {
 	initButtons ( );
 
 	for ( QValueListConstIterator<ODeviceButton> it = d-> m_buttons-> begin ( ); it != d-> m_buttons-> end ( ); ++it ) {
 		if ( (*it). keycode ( ) == code )
 			return &(*it);
 	}
 	return 0;
 }
 
 void ODevice::reloadButtonMapping ( )
 {
 	initButtons ( );
 
 	Config cfg ( "ButtonSettings" );
 
 	for ( uint i = 0; i < d-> m_buttons-> count ( ); i++ ) {
 		ODeviceButton &b = ( *d-> m_buttons ) [i];
 		QString group = "Button" + QString::number ( i );
 
 		QCString pch, hch;
 		QCString pm, hm;
 		QByteArray pdata, hdata;
 
 		if ( cfg. hasGroup ( group )) {
 			cfg. setGroup ( group );
 			pch = cfg. readEntry ( "PressedActionChannel" ). latin1 ( );
 			pm  = cfg. readEntry ( "PressedActionMessage" ). latin1 ( );
 			// pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" ));
 
 			hch = cfg. readEntry ( "HeldActionChannel" ). latin1 ( );
 			hm  = cfg. readEntry ( "HeldActionMessage" ). latin1 ( );
 			// hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" ));
 		}
 
 		b. setPressedAction ( OQCopMessage ( pch, pm, pdata ));
 
 		b. setHeldAction ( OQCopMessage ( hch, hm, hdata ));
 	}
 }
 
 void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
 {
 	initButtons ( );
 
 	QString mb_chan;
 
 	if ( button >= (int) d-> m_buttons-> count ( ))
 		return;
 
 	ODeviceButton &b = ( *d-> m_buttons ) [button];
         b. setPressedAction ( action );
 
 	mb_chan=b. pressedAction ( ). channel ( );
 
 	Config buttonFile ( "ButtonSettings" );
 	buttonFile. setGroup ( "Button" + QString::number ( button ));
 	buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan);
 	buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction ( ). message ( ));
 
 //	buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction ( ). data ( )));
 
 	QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
 {
 	initButtons ( );
 
 	if ( button >= (int) d-> m_buttons-> count ( ))
 		return;
 
 	ODeviceButton &b = ( *d-> m_buttons ) [button];
     	b. setHeldAction ( action );
 
 	Config buttonFile ( "ButtonSettings" );
 	buttonFile. setGroup ( "Button" + QString::number ( button ));
 	buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction ( ). channel ( ));
 	buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction ( ). message ( ));
 
 //	buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction ( ). data ( )));
 
 	QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
+void ODevice::virtual_hook( int id, void* data ) {
 
+}
 
 
 
 /**************************************************
  *
  * iPAQ
  *
  **************************************************/
 
 void iPAQ::init ( )
 {
 	d-> m_vendorstr = "HP";
 	d-> m_vendor = Vendor_HP;
 
 	QFile f ( "/proc/hal/model" );
 
 	if ( f. open ( IO_ReadOnly )) {
 		QTextStream ts ( &f );
 
 		d-> m_modelstr = "H" + ts. readLine ( );
 
 		if ( d-> m_modelstr == "H3100" )
 			d-> m_model = Model_iPAQ_H31xx;
 		else if ( d-> m_modelstr == "H3600" )
 			d-> m_model = Model_iPAQ_H36xx;
 		else if ( d-> m_modelstr == "H3700" )
 			d-> m_model = Model_iPAQ_H37xx;
 		else if ( d-> m_modelstr == "H3800" )
 			d-> m_model = Model_iPAQ_H38xx;
 		else if ( d-> m_modelstr == "H3900" )
 			d-> m_model = Model_iPAQ_H39xx;
 		else
 			d-> m_model = Model_Unknown;
 
 		f. close ( );
 	}
 
 	switch ( d-> m_model ) {
 		case Model_iPAQ_H31xx:
 		case Model_iPAQ_H38xx:
 			d-> m_rotation = Rot90;
 			break;
 		case Model_iPAQ_H36xx:
 		case Model_iPAQ_H37xx:
 		case Model_iPAQ_H39xx:
 		default:
 			d-> m_rotation = Rot270;
 			break;
 	}
 
 	f. setName ( "/etc/familiar-version" );
 	if ( f. open ( IO_ReadOnly )) {
 		d-> m_systemstr = "Familiar";
 		d-> m_system = System_Familiar;
 
 		QTextStream ts ( &f );
 		d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 
 		f. close ( );
 	} else {
 	    f. setName ( "/etc/oz_version" );
 
                     if ( f. open ( IO_ReadOnly )) {
 	    	d-> m_systemstr = "OpenEmbedded/iPaq";
     		d-> m_system = System_Familiar;
 
 	    	QTextStream ts ( &f );
 		    ts.setDevice ( &f );
 	    	d-> m_sysverstr = ts. readLine ( );
 		    f. close ( );
         }
     }
 
 
 
 
 
 	m_leds [0] = m_leds [1] = Led_Off;
 
 	m_power_timer = 0;
 
 }
 
 void iPAQ::initButtons ( )
 {
 	if ( d-> m_buttons )
 		return;
 
 	if ( isQWS( ) )
 		QWSServer::setKeyboardFilter ( this );
 
 	d-> m_buttons = new QValueList <ODeviceButton>;
 
 	for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
 		i_button *ib = ipaq_buttons + i;
 		ODeviceButton b;
 
 		if (( ib-> model & d-> m_model ) == d-> m_model ) {
 			b. setKeycode ( ib-> code );
 			b. setUserText ( QObject::tr ( "Button", ib-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
 
 			d-> m_buttons-> append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 
 //#include <linux/h3600_ts.h>  // including kernel headers is evil ...
 
 typedef struct {
   unsigned char OffOnBlink;       /* 0=off 1=on 2=Blink */
   unsigned char TotalTime;        /* Units of 5 seconds */
   unsigned char OnTime;           /* units of 100m/s */
   unsigned char OffTime;          /* units of 100m/s */
 } LED_IN;
 
 typedef struct {
 	unsigned char mode;
 	unsigned char pwr;
 	unsigned char brightness;
 } FLITE_IN;
diff --git a/libopie/odevice.h b/libopie/odevice.h
index f2f6467..a232d69 100644
--- a/libopie/odevice.h
+++ b/libopie/odevice.h
@@ -115,134 +115,136 @@ enum OHardKey {
 	HardKey_Home      = Qt::Key_F12,
 	HardKey_Mail      = Qt::Key_F13,
 	HardKey_Record    = Qt::Key_F24,
 	HardKey_Suspend   = Qt::Key_F34,
 	HardKey_Backlight = Qt::Key_F35,
 };
 
 enum ODirection {
 	CW   = 0,
 	CCW  = 1,
 	Flip = 2,
 };
 
 /**
  * A singleton which gives informations about device specefic option
  * like the Hardware used, LEDs, the Base Distribution and
  * hardware key mappings.
  *
  * @short A small class for device specefic options
  * @see QObject
  * @author Robert Griebl
  * @version 1.0
  */
 class ODevice : public QObject {
 	Q_OBJECT
 
 private:
         /* disable copy */
 	ODevice ( const ODevice & );
 
 protected:
 	ODevice ( );
 	virtual void init ( );
 	virtual void initButtons ( );
 
 	ODeviceData *d;
 
 public:
 	// sandman do we want to allow destructions? -zecke?
 	virtual ~ODevice ( );
 
 	static ODevice *inst ( );
 
 	// information
 
 	QString modelString ( ) const;
 	OModel model ( ) const;
 	inline OModel series ( ) const { return (OModel) ( model ( ) & Model_Series_Mask ); }
 
 	QString vendorString ( ) const;
 	OVendor vendor ( ) const;
 
 	QString systemString ( ) const;
 	OSystem system ( ) const;
 
 	QString systemVersionString ( ) const;
 
 	Transformation rotation ( ) const;
 	ODirection direction ( ) const;
 
 // system
 
 	virtual bool setSoftSuspend ( bool on );
 	virtual bool suspend ( );
 
 	virtual bool setDisplayStatus ( bool on );
 	virtual bool setDisplayBrightness ( int brightness );
 	virtual int displayBrightnessResolution ( ) const;
 	virtual bool setDisplayContrast ( int contrast );
 	virtual int displayContrastResolution ( ) const;
 
 // input / output
         //FIXME playAlarmSound and al might be better -zecke
 	virtual void alarmSound ( );
 	virtual void keySound ( );
 	virtual void touchSound ( );
 
 	virtual QValueList <OLed> ledList ( ) const;
 	virtual QValueList <OLedState> ledStateList ( OLed led ) const;
 	virtual OLedState ledState ( OLed led ) const;
 	virtual bool setLedState ( OLed led, OLedState st );
 
 	virtual bool hasLightSensor ( ) const;
 	virtual int readLightSensor ( );
 	virtual int lightSensorResolution ( ) const;
 
 	const QStrList &allowedCpuFrequencies() const;
 	bool setCurrentCpuFrequency(uint index);
 
 	/**
 	 * Returns the available buttons on this device.  The number and location
 	 * of buttons will vary depending on the device.  Button numbers will be assigned
 	 * by the device manufacturer and will be from most preferred button to least preffered
 	 * button.  Note that this list only contains "user mappable" buttons.
 	 */
 	const QValueList<ODeviceButton> &buttons ( );
 
 	/**
 	 * Returns the DeviceButton for the \a keyCode.  If \a keyCode is not found, it
 	 * returns 0L
 	 */
 	const ODeviceButton *buttonForKeycode ( ushort keyCode );
 
 	/**
 	 * Reassigns the pressed action for \a button.  To return to the factory
 	 * default pass an empty string as \a qcopMessage.
 	 */
 	void remapPressedAction ( int button, const OQCopMessage &qcopMessage );
 
 	/**
 	 * Reassigns the held action for \a button.  To return to the factory
 	 * default pass an empty string as \a qcopMessage.
 	 */
 	void remapHeldAction ( int button, const OQCopMessage &qcopMessage );
 
 	/**
 	 * How long (in ms) you have to press a button for a "hold" action
 	 */
 	uint buttonHoldTime ( ) const;
 
 signals:
 	void buttonMappingChanged ( );
 
 private slots:
 	void systemMessage ( const QCString &, const QByteArray & );
 
 protected:
 	void reloadButtonMapping ( );
+        /*  ugly virtual hook */
+        virtual void virtual_hook( int id, void* data );
 };
 
 }
 
 #endif