SIMpad specific fix

1 files changed, 4 insertions, 4 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 921a94e..103104f 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -286,33 +286,33 @@ static QCString makeChannel ( const char *str )
 }
 
 static inline bool isQWS()
 {
 	return qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 }
 
 ODevice *ODevice::inst ( )
 {
 	static ODevice *dev = 0;
 
 	if ( !dev ) {
 		if ( QFile::exists ( "/proc/hal/model" ))
 			dev = new iPAQ ( );
 		else if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ))
 			dev = new Zaurus ( );
-		else if ( QFile::exists ( "/proc/ucb1x00" ) && QFile::exists ( "/proc/CS3" ))
+		else if ( QFile::exists ( "/proc/ucb1x00" ) && QFile::exists ( "/proc/cs3" ))
 			dev = new SIMpad ( );
 		else
 			dev = new ODevice ( );
 
 		dev-> init ( );
 	}
 	return dev;
 }
 
 
 /**************************************************
  *
  * common
  *
  **************************************************/
 
@@ -1562,33 +1562,33 @@ void SIMpad::initButtons ( )
 			b. setKeycode ( sb-> code );
 			b. setUserText ( QObject::tr ( "Button", sb-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( sb-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb-> fpressedservice ), sb-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb-> fheldservice ), sb-> fheldaction ));
 
 			d-> m_buttons-> append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 // SIMpad boardcontrol register CS3
-#define SIMPAD_BOARDCONTROL "/proc/CS3"
+#define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
 #define SIMPAD_LED2_ON                     0x1000
 #define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
 #define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
 #define SIMPAD_RESET_SIMCARD               0x8000
@@ -1637,35 +1637,35 @@ bool SIMpad::setLedState ( OLed l, OLedState st )
 			LED_IN leds;
 			::memset ( &leds, 0, sizeof( leds ));
 			leds. TotalTime  = 0;
 			leds. OnTime     = 0;
 			leds. OffTime    = 1;
 			leds. OffOnBlink = 2;
 
 			switch ( st ) {
 				case Led_Off      : leds. OffOnBlink = 0; break;
 				case Led_On       : leds. OffOnBlink = 1; break;
 				case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
 				case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
 			}
 
 			{
             /*TODO Implement this like that:
-               read from CS3
+               read from cs3
                && with SIMPAD_LED2_ON
-               write to CS3 */
+               write to cs3 */
 				m_leds [0] = st;
 				return true;
 			}
 		}
 	}
 	return false;
 }
 
 
 bool SIMpad::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
 	//TODO
 	return false;
 }
 
 void SIMpad::timerEvent ( QTimerEvent * )