also make 1200 baud connection possible

6 files changed, 34 insertions, 2 deletions

diff --git a/noncore/apps/opie-console/btconfigwidget.cpp b/noncore/apps/opie-console/btconfigwidget.cpp
index e1ff18a..7f82e06 100644
--- a/noncore/apps/opie-console/btconfigwidget.cpp
+++ b/noncore/apps/opie-console/btconfigwidget.cpp
@@ -1,202 +1,208 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qlineedit.h>
 #include <qcombobox.h>
 #include <qhbox.h>
 #include <qradiobutton.h>
 
 #include "iolayerbase.h"
 #include "btconfigwidget.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         uint b = bo->count();
         for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
                 return;
             }
         }
         bo->insertItem( str );
         bo->setCurrentItem( b );
     }
 }
 
 BTConfigWidget::BTConfigWidget( const QString& name,
                                 QWidget* parent,
                                 const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
 
     m_lay = new QVBoxLayout( this );
 
     m_device = new QLabel( tr( "Device" ), this );
     QHBox *deviceBox = new QHBox( this );
     m_devRadio = new QRadioButton( deviceBox );
     connect( m_devRadio, SIGNAL( toggled(bool) ), this, SLOT( slotDevRadio(bool) ) );
     m_deviceCmb = new QComboBox( deviceBox );
     m_deviceCmb->setEditable( TRUE );
 
     QLabel *macLabel = new QLabel( this );
     macLabel->setText( tr( "Or peer mac address" ) );
     QHBox *macBox = new QHBox( this );
     m_macRadio = new QRadioButton( macBox );
     connect( m_macRadio, SIGNAL( toggled(bool) ), this, SLOT( slotMacRadio(bool) ) );
     m_mac = new QLineEdit( macBox );
 
     m_base = new IOLayerBase(this, "base");
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( deviceBox );
     m_lay->addWidget( macLabel );
     m_lay->addWidget( macBox );
     m_lay->addWidget( m_base );
 
     m_deviceCmb->insertItem( "/dev/ttyU0" );
     m_deviceCmb->insertItem( "/dev/ttyU1" );
 }
 
 BTConfigWidget::~BTConfigWidget() {
 
 }
 void BTConfigWidget::load( const Profile& prof ) {
     int rad_flow = prof.readNumEntry("Flow");
     int rad_parity = prof.readNumEntry("Parity");
     int speed = prof.readNumEntry("Speed");
     QString mac = prof.readEntry("Mac");
 
     if (!mac.isEmpty() ) {
         m_mac->setText( mac );
     } else {
         m_devRadio->setChecked( true );
     }
 
     if (rad_flow == 1) {
         m_base->setFlow( IOLayerBase::Hardware );
     } else if (rad_flow == 2) {
         m_base->setFlow( IOLayerBase::Software );
     } else if (rad_flow == 0) {
          m_base->setFlow( IOLayerBase::None );
     }
 
     if (rad_parity == 1) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ) {
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed(IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600  );
         break;
     case 38400:
         m_base->setSpeed(IOLayerBase::Baud_38400  );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200  );
         break;
     case 4800:
         m_base->setSpeed( IOLayerBase::Baud_4800  );
         break;
     case 2400:
         m_base->setSpeed( IOLayerBase::Baud_2400  );
         break;
+    case 1200:
+            m_base->setSpeed( IOLayerBase::Baud_1200  );
+            break;
     case 9600:
     default:
         m_base->setSpeed(IOLayerBase::Baud_9600 );
         break;
     }
 
     if ( prof.readEntry("Device").isEmpty() ) return;
     setCurrent( prof.readEntry("Device"), m_deviceCmb );
 
 }
 /*
  * save speed,
  * flow,
  * parity
  */
 void BTConfigWidget::save( Profile& prof ) {
     int flow, parity, speed;
     flow = parity = speed = 0;
     prof.writeEntry("Device", m_deviceCmb->currentText() );
 
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
         break;
     case IOLayerBase::Hardware:
         flow = 1;
         break;
     }
 
     switch( m_base->parity() ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
     case IOLayerBase::Baud_4800:
         speed = 4800;
         break;
     case IOLayerBase::Baud_2400:
         speed = 2400;
         break;
+    case IOLayerBase::Baud_1200;
+            speed = 1200;
+            break;
     default:
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     prof.writeEntry("Flow",  flow);
     prof.writeEntry("Parity", parity);
     prof.writeEntry("Speed",  speed);
     prof.writeEntry("Mac", m_mac->text() );
 }
 
 void BTConfigWidget::slotMacRadio( bool on  ) {
     if ( on ) {
         m_devRadio->setChecked( false );
         m_deviceCmb->setEnabled( false );
         m_mac->setEnabled( true );
     } else {
         m_devRadio->setChecked( true );
     }
 }
 
 void BTConfigWidget::slotDevRadio( bool on  ) {
     if ( on ) {
         m_macRadio->setChecked( false );
         m_deviceCmb->setEnabled( true );
         m_mac->setEnabled( false );
     } else {
         m_macRadio->setChecked( true );
     }
 }
diff --git a/noncore/apps/opie-console/iolayerbase.cpp b/noncore/apps/opie-console/iolayerbase.cpp
index 0f64d6a..95c291f 100644
--- a/noncore/apps/opie-console/iolayerbase.cpp
+++ b/noncore/apps/opie-console/iolayerbase.cpp
@@ -1,252 +1,260 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 #include <qhbuttongroup.h>
 #include <qradiobutton.h>
 
 #include "iolayerbase.h"
 
 namespace {
     enum ParityIds {
         id_parity_none,
         id_parity_odd,
         id_parity_even
     };
 
     enum FlowIds {
         id_flow_hw,
         id_flow_sw,
         id_flow_none,
     };
 
     enum SpeedIds {
         id_baud_115200,
         id_baud_57600,
         id_baud_38400,
         id_baud_19200,
         id_baud_9600,
         id_baud_4800,
-        id_baud_2400
+        id_baud_2400,
+        id_baud_1200
     };
 
     enum DataIds {
         id_data_5,
         id_data_6,
         id_data_7,
         id_data_8
     };
 
     enum StopIds {
         id_stop_1,
         id_stop_1_5,
         id_stop_2
     };
 
 }
 
 
 IOLayerBase::IOLayerBase( QWidget* par,  const char* name )
     : QWidget( par, name )
 {
     m_speedLabel = new QLabel(tr("Speed"), this );
     m_speedBox = new QComboBox(this );
 
     m_groupFlow = new QHButtonGroup(tr("Flow control"),this );
     m_flowHw = new QRadioButton(tr("Hardware"), m_groupFlow );
     m_flowSw = new QRadioButton(tr("Software"), m_groupFlow );
     m_flowNone = new QRadioButton( tr("None"), m_groupFlow );
 
     m_groupParity = new QHButtonGroup(tr("Parity"), this );
     m_parityNone = new QRadioButton(tr("None"), m_groupParity );
     m_parityOdd = new QRadioButton(tr("Odd"), m_groupParity );
     m_parityEven = new QRadioButton(tr("Even"), m_groupParity );
 
     m_groupData = new QHButtonGroup(tr("Data Bits"), this);
     m_data5 = new QRadioButton(tr("5"), m_groupData );
     m_data6 = new QRadioButton(tr("6"), m_groupData );
     m_data7 = new QRadioButton(tr("7"), m_groupData );
     m_data8 = new QRadioButton(tr("8"), m_groupData );
 
     m_groupStop = new QHButtonGroup(tr("Stop Bits"), this );
     m_stop1 = new QRadioButton(tr("1"), m_groupStop );
     m_stop15 = new QRadioButton(tr("1.5"), m_groupStop );
     m_stop2 = new QRadioButton(tr("2"), m_groupStop );
 
 
     m_lroot = new QVBoxLayout( this );
     m_lroot->add(m_speedLabel );
     m_lroot->add(m_speedBox );
     m_lroot->add(m_groupFlow );
     m_lroot->add(m_groupParity );
     m_lroot->add( m_groupData );
     m_lroot->add( m_groupStop );
     m_lroot->addStretch(2);
 
     // profiles
     m_speedBox->insertItem(tr("115200 baud"), id_baud_115200 );
     m_speedBox->insertItem(tr("57600 baud"), id_baud_57600   );
     m_speedBox->insertItem(tr("38400 baud"), id_baud_38400   );
     m_speedBox->insertItem(tr("19200 baud"), id_baud_19200   );
     m_speedBox->insertItem(tr("9600 baud"), id_baud_9600     );
     m_speedBox->insertItem(tr("4800 baud"), id_baud_4800     );
     m_speedBox->insertItem(tr("2400 baud"), id_baud_2400     );
+            m_speedBox->insertItem(tr("1200 baud"), id_baud_1200);
 };
 IOLayerBase::~IOLayerBase() {
 
 }
 void IOLayerBase::setFlow( Flow flo ) {
     switch ( flo ) {
     case Software:
         m_flowSw->setChecked( true );
         break;
     case Hardware:
         m_flowHw->setChecked( true );
         break;
     case None:
         m_flowNone->setChecked( true );
         break;
     }
 }
 
 void IOLayerBase::setParity( Parity par ) {
     switch( par ) {
     case NonePar:
         m_parityNone->setChecked( true );
         break;
     case Odd:
         m_parityOdd->setChecked( true );
         break;
     case Even:
         m_parityEven->setChecked( true );
         break;
     }
 }
 void IOLayerBase::setSpeed( Speed sp ) {
     int index = -1;
     switch( sp ) {
     case Baud_115200:
         index = id_baud_115200;
         break;
     case Baud_57600:
         index = id_baud_57600;
         break;
     case Baud_38400:
         index = id_baud_38400;
         break;
     case Baud_19200:
         index = id_baud_19200;
         break;
     case Baud_4800:
         index = id_baud_4800;
         break;
     case Baud_2400:
         index = id_baud_2400;
         break;
+    case Baud_1200:
+            index = id_baud_1200;
+            break;
     default:
     case Baud_9600:
         index = id_baud_9600;
         break;
     }
     m_speedBox->setCurrentItem(index );
 }
 
 void IOLayerBase::setData( Data data ) {
     switch( data ) {
     case Data_Five:
         m_data5->setChecked( true );
         break;
     case Data_Six:
         m_data6->setChecked( true );
         break;
     case Data_Seven:
         m_data7->setChecked( true );
         break;
     default:
         m_data8->setChecked( true );
         break;
     }
 }
 
 
 void IOLayerBase::setStop( Stop stop  ) {
     switch( stop ) {
     case Stop_Two:
         m_stop2->setChecked( true );
         break;
     case Stop_OnePointFive:
         m_stop15->setChecked( true );
         break;
     default:
         m_stop1->setChecked( true );
         break;
     }
 }
 
 
 
 IOLayerBase::Flow IOLayerBase::flow()const {
     if (m_flowHw->isChecked() ) {
         return Hardware;
     }else if( m_flowSw->isChecked() ) {
         return Software;
     } else {
         return None;
     }
 }
 IOLayerBase::Parity IOLayerBase::parity()const {
     if ( m_parityOdd->isChecked() ) {
         return Odd;
     } else if  ( m_parityEven->isChecked() ) {
         return Even;
     } else {
         return NonePar;
     }
 
 }
 IOLayerBase::Speed IOLayerBase::speed()const{
     switch( m_speedBox->currentItem() ) {
     case id_baud_115200:
         return Baud_115200;
         break;
     case id_baud_57600:
         return Baud_57600;
         break;
     case id_baud_38400:
         return Baud_38400;
         break;
     case id_baud_19200:
         return Baud_19200;
         break;
     case id_baud_4800:
         return Baud_4800;
         break;
     case id_baud_2400:
         return Baud_2400;
         break;
+    case id_baud_1200:
+            return Baud_1200;
+            break;
     default:
     case id_baud_9600:
         return Baud_9600;
         break;
     }
 }
 IOLayerBase::Data IOLayerBase::data()const {
     if ( m_data5->isChecked() ) {
         return Data_Five;
     } else if  ( m_data6->isChecked() ) {
         return Data_Six;
     } else if  ( m_data7->isChecked() ) {
         return Data_Seven;
     } else {
         return Data_Eight;
     }
 }
 IOLayerBase::Stop IOLayerBase::stop()const {
     if ( m_stop2->isChecked() ) {
         return Stop_Two;
     } else if  ( m_stop15->isChecked() ) {
         return Stop_OnePointFive;
     } else {
         return Stop_One;
     }
 }
 
diff --git a/noncore/apps/opie-console/iolayerbase.h b/noncore/apps/opie-console/iolayerbase.h
index 214a35c..7d304a1 100644
--- a/noncore/apps/opie-console/iolayerbase.h
+++ b/noncore/apps/opie-console/iolayerbase.h
@@ -1,60 +1,61 @@
 #ifndef OPIE_IO_LAYER_BASE_H
 #define OPIE_IO_LAYER_BASE_H
 
 
 #include <qwidget.h>
 
 class QLabel;
 class QComboBox;
 class QVBoxLayout;
 class QButtonGroup;
 class QRadioButton;
 class QHBoxLayout;
 class IOLayerBase : public QWidget {
 
     Q_OBJECT
 
 public:
     enum Flow { Hardware, Software, None };
     enum Parity{ Odd  =2 , Even =1, NonePar =0 };
     enum Speed{ Baud_115200,
                 Baud_57600,
                 Baud_38400,
                 Baud_19200,
                 Baud_9600,
                 Baud_4800,
-                Baud_2400 };
+                Baud_2400,
+                Baud_1200 };
     enum Data { Data_Five =5, Data_Six =6, Data_Seven=7, Data_Eight=8 };
     enum Stop { Stop_One =1, Stop_OnePointFive=15, Stop_Two=2 };
 
     IOLayerBase( QWidget* base,  const char* name = 0l);
     ~IOLayerBase();
 
     void setFlow( Flow flo );
     void setParity( Parity par );
     void setSpeed( Speed speed );
     void setData( Data data );
     void setStop( Stop stop );
 
     Flow flow()const;
     Parity parity()const;
     Speed speed()const;
     Data data()const;
     Stop stop()const;
 private:
     QVBoxLayout* m_lroot;
     QLabel* m_speedLabel;
     QComboBox* m_speedBox;
     QButtonGroup* m_groupFlow,  *m_groupData, *m_groupStop ;
     QRadioButton *m_flowHw, *m_flowSw, *m_flowNone;
 
     QButtonGroup* m_groupParity;
     QRadioButton *m_parityOdd, *m_parityEven, *m_parityNone;
     QRadioButton *m_data5, *m_data6, *m_data7, *m_data8;
     QRadioButton *m_stop1, *m_stop15, *m_stop2;
     QHBoxLayout* m_hbox;
     QHBoxLayout* m_hboxPar;
 };
 
 
 #endif
diff --git a/noncore/apps/opie-console/irdaconfigwidget.cpp b/noncore/apps/opie-console/irdaconfigwidget.cpp
index 4ee770d..713862d 100644
--- a/noncore/apps/opie-console/irdaconfigwidget.cpp
+++ b/noncore/apps/opie-console/irdaconfigwidget.cpp
@@ -1,160 +1,166 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 
 #include "iolayerbase.h"
 #include "irdaconfigwidget.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         uint b = bo->count();
         for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
                 return;
             }
         }
         bo->insertItem( str );
         bo->setCurrentItem( b );
     }
 
 
 }
 
 IrdaConfigWidget::IrdaConfigWidget( const QString& name,
                                         QWidget* parent,
                                         const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
 
     m_lay = new QVBoxLayout(this );
     m_device = new QLabel(tr("Device"), this );
     m_deviceCmb = new QComboBox(this );
     m_deviceCmb->setEditable( TRUE );
 
     m_base = new IOLayerBase(this, "base");
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( m_deviceCmb );
     m_lay->addWidget( m_base );
 
     m_deviceCmb->insertItem( "/dev/ircomm0" );
     m_deviceCmb->insertItem( "/dev/ircomm1" );
 }
 
 IrdaConfigWidget::~IrdaConfigWidget() {
 
 }
 void IrdaConfigWidget::load( const Profile& prof ) {
     int rad_flow = prof.readNumEntry("Flow");
     int rad_parity = prof.readNumEntry("Parity");
     int speed = prof.readNumEntry("Speed");
 
     if (rad_flow == 1) {
         m_base->setFlow( IOLayerBase::Hardware );
     } else if (rad_flow == 2) {
         m_base->setFlow( IOLayerBase::Software );
     } else {
          m_base->setFlow( IOLayerBase::None );
     }
 
     if (rad_parity == 1) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ) {
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed(IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600  );
         break;
     case 38400:
         m_base->setSpeed(IOLayerBase::Baud_38400  );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200  );
         break;
     case 4800:
         m_base->setSpeed( IOLayerBase::Baud_4800  );
         break;
     case 2400:
         m_base->setSpeed( IOLayerBase::Baud_2400  );
         break;
+    case 1200:
+                m_base->setSpeed( IOLayerBase::Baud_1200);
+            break;
     case 9600:
     default:
         m_base->setSpeed(IOLayerBase::Baud_9600 );
         break;
     }
 
     if ( prof.readEntry("Device").isEmpty() ) return;
     setCurrent( prof.readEntry("Device"), m_deviceCmb );
 
 }
 /*
  * save speed,
  * flow,
  * parity
  */
 void IrdaConfigWidget::save( Profile& prof ) {
     int flow, parity, speed;
     flow = parity = speed = 0;
     prof.writeEntry("Device", m_deviceCmb->currentText() );
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
         break;
     case IOLayerBase::Hardware:
         flow = 1;
         break;
     }
 
 
     switch( m_base->parity() ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
     case IOLayerBase::Baud_4800:
         speed = 4800;
         break;
     case IOLayerBase::Baud_2400:
         speed = 2400;
         break;
+    case IOLayerBase::Baud_1200:
+            speed = 2400;
+            break;
     default:
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     prof.writeEntry("Flow",  flow);
     prof.writeEntry("Parity", parity);
     prof.writeEntry("Speed",  speed);
 }
diff --git a/noncore/apps/opie-console/modemconfigwidget.cpp b/noncore/apps/opie-console/modemconfigwidget.cpp
index 90d0b5b..b2f5c68 100644
--- a/noncore/apps/opie-console/modemconfigwidget.cpp
+++ b/noncore/apps/opie-console/modemconfigwidget.cpp
@@ -1,271 +1,276 @@
 #include "modemconfigwidget.h"
 #include "dialdialog.h"
 
 /* OPIE */
 #include <opie2/odebug.h>
 #include <qpe/qpeapplication.h>
 using namespace Opie::Core;
 
 /* QT */
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 #include <qpushbutton.h>
 #include <qhbox.h>
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         uint b = bo->count();
         for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
                 return;
             }
         }
         bo->insertItem( str );
         bo->setCurrentItem( b );
     }
 }
 
 ModemConfigWidget::ModemConfigWidget( const QString& name, QWidget* parent,
                                 const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
 
     m_lay = new QVBoxLayout( this );
     m_device = new QLabel(tr( "Modem is attached to:" ), this );
     m_deviceCmb = new QComboBox(this );
     m_deviceCmb->setEditable( TRUE );
 
     QLabel* telLabel = new QLabel( this );
     telLabel->setText( tr( "Enter telefon number here:" ) );
     QHBox *buttonBox = new QHBox( this );
     m_telNumber = new QLineEdit( buttonBox );
     QPushButton *atButton = new QPushButton( buttonBox );
     atButton->setText( tr( "AT commands" ) );
     connect( atButton, SIGNAL( clicked() ), this, SLOT( slotAT() ) );
 
     QPushButton *dialButton = new QPushButton( buttonBox );
     dialButton->setText( tr( "Enter number" ) );
     connect( dialButton, SIGNAL( clicked() ), this, SLOT( slotDial() ) );
 
     m_base = new IOLayerBase( this, "base" );
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( m_deviceCmb );
     m_lay->addWidget( telLabel );
     m_lay->addWidget( buttonBox );
     m_lay->addWidget( m_base );
     m_lay->addStretch( 0 );
 
     m_deviceCmb->insertItem( "/dev/ttyS0" );
     m_deviceCmb->insertItem( "/dev/ttyS1" );
     m_deviceCmb->insertItem( "/dev/ttyS2" );
 
     atConf = new  ATConfigDialog( this, "ATConfig", true );
 }
 
 ModemConfigWidget::~ModemConfigWidget() {
 
 }
 void ModemConfigWidget::load( const Profile& prof ) {
 
     int rad_flow = prof.readNumEntry( "Flow" );
     int rad_parity = prof.readNumEntry( "Parity" );
     int speed = prof.readNumEntry( "Speed" );
     int dbits = prof.readNumEntry("DataBits");
     int sbits = prof.readNumEntry("StopBits");
     QString number = prof.readEntry( "Number" );
 
     if ( !number.isEmpty() ) {
         m_telNumber->setText( number );
     }
 
     if ( rad_flow == 1 ) {
         m_base->setFlow( IOLayerBase::Hardware );
     } else if (rad_flow == 2) {
         m_base->setFlow( IOLayerBase::Software );
     } else if (rad_flow == 0) {
          m_base->setFlow( IOLayerBase::None );
     }
 
 
     if ( rad_parity == 1 ) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ){
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed( IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600 );
         break;
     case 38400:
         m_base->setSpeed( IOLayerBase::Baud_38400 );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200 );
         break;
     case 4800:
         m_base->setSpeed( IOLayerBase::Baud_4800 );
         break;
     case 2400:
         m_base->setSpeed( IOLayerBase::Baud_2400 );
         break;
+    case 1200:
+            m_base->setSpeed( IOLayerBase::Baud_1200 );
     case 9600:
     default:
         m_base->setSpeed( IOLayerBase::Baud_9600 );
         break;
     }
 
 
     if ( dbits == 5) {
         m_base->setData( IOLayerBase::Data_Five );
     } else if (rad_flow == 6) {
         m_base->setData( IOLayerBase::Data_Six );
     } else if (rad_flow == 7) {
         m_base->setData( IOLayerBase::Data_Seven );
     } else {
         m_base->setData( IOLayerBase::Data_Eight );
     }
 
     if ( sbits == 2) {
         m_base->setStop( IOLayerBase::Stop_Two );
     } else if ( sbits == 15 ) {
         m_base->setStop( IOLayerBase::Stop_OnePointFive );
     } else {
         m_base->setStop( IOLayerBase::Stop_One );
     }
 
 
     atConf->readConfig( prof );
     if ( prof.readEntry( "Device" ).isEmpty() ) {
         owarn << "device empty!" << oendl;
         return;
     }
     setCurrent( prof.readEntry( "Device" ), m_deviceCmb );
 
 
 }
 
 /*
  * save speed,
  * flow,
  * parity
  */
 void ModemConfigWidget::save( Profile& prof ) {
     int flow, parity, speed, data, stop;
     flow = parity = speed = data = stop = 0;
     prof.writeEntry( "Device", m_deviceCmb->currentText() );
 
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
         break;
     case IOLayerBase::Hardware:
         flow = 1;
         break;
     }
 
     switch( m_base->parity() ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     case IOLayerBase::Baud_4800:
         speed = 4800;
         break;
     case IOLayerBase::Baud_2400:
         speed = 2400;
         break;
+    case IOLayerBase::Baud_1200:
+            speed = 1200;
+            break;
     }
 
     switch( m_base->data() ) {
     case IOLayerBase::Data_Five:
         data = 5;
         break;
     case IOLayerBase::Data_Six:
         data = 6;
         break;
     case IOLayerBase::Data_Seven:
         data = 7;
         break;
     case IOLayerBase::Data_Eight:
         data = 8;
         break;
     }
 
     switch( m_base->stop() ) {
     case IOLayerBase::Stop_One:
         stop = 1;
         break;
     case IOLayerBase::Stop_OnePointFive:
         stop = 15;
         break;
     case IOLayerBase::Stop_Two:
         stop = 2;
         break;
     }
 
     prof.writeEntry( "Flow", flow );
     prof.writeEntry( "Parity", parity );
     prof.writeEntry( "Speed", speed );
     prof.writeEntry("DataBits", data);
     prof.writeEntry("StopBits", stop);
     prof.writeEntry( "Number", m_telNumber->text() );
 
 
     atConf->writeConfig(prof);
 }
 
 void ModemConfigWidget::slotAT() {
     //  ATConfigDialog conf( this, "ATConfig", true );
     // josef/Max I know why don't you create the stuff on the stack
     // but making it a TopLevel Dialog and ignoring
     // cancel is not fun either...
     // what to do? FIXME!!! -zecke
     if ( QPEApplication::execDialog( atConf ) != QDialog::Accepted ) {
         // reload old settings
     }
 }
 
 void ModemConfigWidget::slotDial() {
     DialDialog dial( this, "DialConfig", true );
     if(!m_telNumber->text().isEmpty()) {
         dial.setNumber(m_telNumber->text().replace(QRegExp("[\\-\\/\\ \\.\\,]"), ""));
     }
     if ( QPEApplication::execDialog( &dial ) == QDialog::Accepted ) {
         m_telNumber->setText( dial.number() );
     }
 }
diff --git a/noncore/apps/opie-console/serialconfigwidget.cpp b/noncore/apps/opie-console/serialconfigwidget.cpp
index 5f3547a..c4c9c99 100644
--- a/noncore/apps/opie-console/serialconfigwidget.cpp
+++ b/noncore/apps/opie-console/serialconfigwidget.cpp
@@ -1,210 +1,216 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 
 #include "iolayerbase.h"
 #include "serialconfigwidget.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         uint b = bo->count();
         for (int i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
                 return;
             }
         }
         bo->insertItem( str );
         bo->setCurrentItem( b );
     }
 
 
 }
 
 SerialConfigWidget::SerialConfigWidget( const QString& name,
                                         QWidget* parent,
                                         const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
 
     m_lay = new QVBoxLayout(this );
     m_device = new QLabel(tr("Device"), this );
     m_deviceCmb = new QComboBox(this );
     m_deviceCmb->setEditable( TRUE );
 
     m_base = new IOLayerBase(this, "base");
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( m_deviceCmb );
     m_lay->addWidget( m_base );
 
     m_deviceCmb->insertItem( "/dev/ttyS0" );
     m_deviceCmb->insertItem( "/dev/ttyS1" );
     m_deviceCmb->insertItem( "/dev/ttySA0");
     m_deviceCmb->insertItem( "/dev/ttySA1");
 
 }
 SerialConfigWidget::~SerialConfigWidget() {
 
 }
 void SerialConfigWidget::load( const Profile& prof ) {
     int rad_flow = prof.readNumEntry("Flow");
     int rad_parity = prof.readNumEntry("Parity");
     int speed = prof.readNumEntry("Speed");
     int dbits = prof.readNumEntry("DataBits");
     int sbits = prof.readNumEntry("StopBits");
 
     if (rad_flow == 1) {
         m_base->setFlow( IOLayerBase::Hardware );
     } else if (rad_flow == 2) {
         m_base->setFlow( IOLayerBase::Software );
     } else {
         m_base->setFlow( IOLayerBase::None );
     }
 
     if (rad_parity == 1) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ) {
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed(IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600  );
         break;
     case 38400:
         m_base->setSpeed(IOLayerBase::Baud_38400  );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200  );
         break;
     case 4800:
         m_base->setSpeed( IOLayerBase::Baud_4800  );
         break;
     case 2400:
         m_base->setSpeed( IOLayerBase::Baud_2400  );
         break;
+    case 1200:
+            m_base->setSpeed( IOLayerBase::Baud_1200  );
+            break;
     case 9600:
     default:
         m_base->setSpeed(IOLayerBase::Baud_9600 );
         break;
     }
 
     if ( dbits == 5) {
         m_base->setData( IOLayerBase::Data_Five );
     } else if (rad_flow == 6) {
         m_base->setData( IOLayerBase::Data_Six );
     } else if (rad_flow == 7) {
         m_base->setData( IOLayerBase::Data_Seven );
     } else {
         m_base->setData( IOLayerBase::Data_Eight );
     }
 
     if ( sbits == 2) {
         m_base->setStop( IOLayerBase::Stop_Two );
     } else if ( sbits == 15 ) {
         m_base->setStop( IOLayerBase::Stop_OnePointFive );
     } else {
         m_base->setStop( IOLayerBase::Stop_One );
     }
 
     if ( prof.readEntry("Device").isEmpty() ) return;
     setCurrent( prof.readEntry("Device"), m_deviceCmb );
 
 }
 /*
  * save speed,
  * flow,
  * parity
  */
 void SerialConfigWidget::save( Profile& prof ) {
     int flow, parity, speed,  data, stop;
     flow = parity = speed = data = stop = 0;
     prof.writeEntry("Device", m_deviceCmb->currentText() );
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
         break;
     case IOLayerBase::Hardware:
         flow = 1;
         break;
     }
 
     switch( m_base->parity() ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
     case IOLayerBase::Baud_4800:
         speed = 4800;
         break;
     case IOLayerBase::Baud_2400:
         speed = 2400;
         break;
+    case IOLayerBase::Baud_1200:
+            speed = 1200;
+            break;
     default:
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     switch( m_base->data() ) {
     case IOLayerBase::Data_Five:
         data = 5;
         break;
     case IOLayerBase::Data_Six:
         data = 6;
         break;
     case IOLayerBase::Data_Seven:
         data = 7;
         break;
     case IOLayerBase::Data_Eight:
         data = 8;
         break;
     }
 
     switch( m_base->stop() ) {
     case IOLayerBase::Stop_One:
         stop = 1;
         break;
     case IOLayerBase::Stop_OnePointFive:
         stop = 15;
         break;
     case IOLayerBase::Stop_Two:
         stop = 2;
         break;
     }
 
     prof.writeEntry("Flow",  flow);
     prof.writeEntry("Parity", parity);
     prof.writeEntry("Speed",  speed);
     prof.writeEntry("DataBits", data);
     prof.writeEntry("StopBits", stop);
 }