2400 and 4800 baud added, also free font selection

11 files changed, 128 insertions, 41 deletions

diff --git a/noncore/apps/opie-console/btconfigwidget.cpp b/noncore/apps/opie-console/btconfigwidget.cpp
index 0ac337f..e1ff18a 100644
--- a/noncore/apps/opie-console/btconfigwidget.cpp
+++ b/noncore/apps/opie-console/btconfigwidget.cpp
@@ -78,48 +78,54 @@ void BTConfigWidget::load( const Profile& prof ) {
          m_base->setFlow( IOLayerBase::None );
     }
 
     if (rad_parity == 1) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ) {
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed(IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600  );
         break;
     case 38400:
         m_base->setSpeed(IOLayerBase::Baud_38400  );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200  );
         break;
+    case 4800:
+        m_base->setSpeed( IOLayerBase::Baud_4800  );
+        break;
+    case 2400:
+        m_base->setSpeed( IOLayerBase::Baud_2400  );
+        break;
     case 9600:
     default:
         m_base->setSpeed(IOLayerBase::Baud_9600 );
         break;
     }
 
     if ( prof.readEntry("Device").isEmpty() ) return;
     setCurrent( prof.readEntry("Device"), m_deviceCmb );
 
 }
 /*
  * save speed,
  * flow,
  * parity
  */
 void BTConfigWidget::save( Profile& prof ) {
     int flow, parity, speed;
     flow = parity = speed = 0;
     prof.writeEntry("Device", m_deviceCmb->currentText() );
 
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
@@ -136,48 +142,54 @@ void BTConfigWidget::save( Profile& prof ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
+    case IOLayerBase::Baud_4800:
+        speed = 4800;
+        break;
+    case IOLayerBase::Baud_2400:
+        speed = 2400;
+        break;
     default:
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     prof.writeEntry("Flow",  flow);
     prof.writeEntry("Parity", parity);
     prof.writeEntry("Speed",  speed);
     prof.writeEntry("Mac", m_mac->text() );
 }
 
 void BTConfigWidget::slotMacRadio( bool on  ) {
     if ( on ) {
         m_devRadio->setChecked( false );
         m_deviceCmb->setEnabled( false );
         m_mac->setEnabled( true );
     } else {
         m_devRadio->setChecked( true );
     }
 }
 
 void BTConfigWidget::slotDevRadio( bool on  ) {
     if ( on ) {
diff --git a/noncore/apps/opie-console/emulation_handler.cpp b/noncore/apps/opie-console/emulation_handler.cpp
index 89b70c6..1a0613f 100644
--- a/noncore/apps/opie-console/emulation_handler.cpp
+++ b/noncore/apps/opie-console/emulation_handler.cpp
@@ -20,49 +20,51 @@ EmulationHandler::EmulationHandler( const Profile& prof, QWidget* parent,const c
     m_teEmu = new TEmuVt102(m_teWid );
 
     connect(m_teEmu,SIGNAL(ImageSizeChanged(int,int) ),
             this, SIGNAL(changeSize(int,int) ) );
     connect(m_teEmu, SIGNAL(sndBlock(const char*,int) ),
             this, SLOT(recvEmulation(const char*,int) ) );
     m_teEmu->setConnect( true );
     m_teEmu->setHistory( TRUE );
     load( prof );
 
 
 
 }
 TEmulation* EmulationHandler::emulation() {
     return m_teEmu;
 }
 EmulationHandler::~EmulationHandler() {
     if (isRecording())
         clearScript();
     delete m_teEmu;
     delete m_teWid;
 }
 
 void EmulationHandler::load( const Profile& prof) {
-    m_teWid->setVTFont( font( prof.readNumEntry("Font")  )  );
+
+//     m_teWid->setVTFont( font( prof.readNumEntry("Font")  )  );
+    m_teWid->setVTFont( QFont( prof.readEntry("Font"), prof.readNumEntry( "FontSize"  ), QFont::Normal  )  );
     int num = prof.readNumEntry("Color");
     setColor( foreColor(num), backColor(num) );
     m_teWid->setBackgroundColor(backColor(num) );
 
     int term = prof.readNumEntry("Terminal",  0) ;
     switch(term) {
     default:
     case Profile::VT102:
     case Profile::VT100:
         m_teEmu->setKeytrans("vt100.keytab");
         break;
     case Profile::Linux:
         m_teEmu->setKeytrans("linux.keytab");
         break;
     case Profile::XTerm:
         m_teEmu->setKeytrans("default.Keytab");
         break;
     }
 }
 void EmulationHandler::recv( const QByteArray& ar) {
     m_teEmu->onRcvBlock(ar.data(), ar.count() );
 }
 void EmulationHandler::recvEmulation(const char* src, int len ) {
     QByteArray ar(len);
@@ -109,77 +111,77 @@ QFont EmulationHandler::font( int id ) {
         size = 7;
         break;
     case 2:
         name = QString::fromLatin1("Fixed");
         size = 12;
         break;
     }
     QFont font(name, size, QFont::Normal );
     font.setFixedPitch(TRUE );
     return font;
 }
 QColor EmulationHandler::foreColor(int col) {
     QColor co;
     /* we need to switch it */
     switch( col ) {
     default:
     case Profile::White:
         /* color is black */
         co = Qt::white;
         break;
     case Profile::Black:
         co = Qt::black;
         break;
     case Profile::Green:
-        owarn << "Foreground green" << oendl; 
+        owarn << "Foreground green" << oendl;
         co = Qt::green;
         break;
     case Profile::Orange:
-        owarn << "Foreground orange" << oendl; 
+        owarn << "Foreground orange" << oendl;
         co.setRgb( 231, 184, 98 );
         break;
     }
 
     return co;
 }
 QColor EmulationHandler::backColor(int col ) {
   QColor co;
     /* we need to switch it */
     switch( col ) {
     default:
     case Profile::White:
         /* color is white */
         co = Qt::black;
         break;
     case Profile::Black:
         co = Qt::white;
         break;
     case Profile::Green:
-        owarn << "Background black" << oendl; 
+        owarn << "Background black" << oendl;
         co = Qt::black;
         break;
     case Profile::Orange:
-        owarn << "Background black" << oendl; 
+        owarn << "Background black" << oendl;
         co = Qt::black;
         break;
     }
 
     return co;
 }
 
 QPushButton*  EmulationHandler::cornerButton() {
     return m_teWid->cornerButton();
 }
 
 
 Script *EmulationHandler::script() {
     return m_script;
 }
 
 bool EmulationHandler::isRecording() {
     return (m_script != 0);
 }
 
 void EmulationHandler::startRecording() {
     if (!isRecording())
         m_script = new Script();
 }
diff --git a/noncore/apps/opie-console/io_serial.h b/noncore/apps/opie-console/io_serial.h
index 20c1ae1..f8b04e2 100644
--- a/noncore/apps/opie-console/io_serial.h
+++ b/noncore/apps/opie-console/io_serial.h
@@ -18,49 +18,49 @@ class IOSerial : public IOLayer {
     Q_OBJECT
 public:
     enum Parity {
         ParityNone = 0,
         ParityEven,
         ParityOdd,
         ParitySpace,
         ParityMark
     };
 
     enum Flow {
         FlowHW = 0x01,
         FlowSW = 0x02
     };
 
     IOSerial(const Profile &);
     ~IOSerial();
 
     virtual QString identifier() const;
     virtual QString name() const;
     int rawIO() const;
     void closeRawIO (int fd );
     virtual QBitArray supports() const;
     virtual bool isConnected();
-    
+
 /*signals:
     void received(const QByteArray &);
     void error(int, const QString &);
 */
 public slots:
     virtual void send(const QByteArray &);
     virtual bool open();
     virtual void close();
     virtual void reload(const Profile &);
 protected:
     int baud(int baud) const;
     void internDetach();
     void internAttach();
 protected slots:
     void dataArrived();
     void errorOccured();
 protected:
     QSocketNotifier *m_read;
     QSocketNotifier *m_error;
     QString          m_device;
     int              m_baud;
     int              m_parity;
     int              m_dbits;
     int              m_sbits;
diff --git a/noncore/apps/opie-console/iolayerbase.cpp b/noncore/apps/opie-console/iolayerbase.cpp
index b434e66..0f64d6a 100644
--- a/noncore/apps/opie-console/iolayerbase.cpp
+++ b/noncore/apps/opie-console/iolayerbase.cpp
@@ -3,49 +3,51 @@
 #include <qcombobox.h>
 #include <qhbuttongroup.h>
 #include <qradiobutton.h>
 
 #include "iolayerbase.h"
 
 namespace {
     enum ParityIds {
         id_parity_none,
         id_parity_odd,
         id_parity_even
     };
 
     enum FlowIds {
         id_flow_hw,
         id_flow_sw,
         id_flow_none,
     };
 
     enum SpeedIds {
         id_baud_115200,
         id_baud_57600,
         id_baud_38400,
         id_baud_19200,
-        id_baud_9600
+        id_baud_9600,
+	id_baud_4800,
+	id_baud_2400
     };
 
     enum DataIds {
         id_data_5,
         id_data_6,
         id_data_7,
         id_data_8
     };
 
     enum StopIds {
         id_stop_1,
         id_stop_1_5,
         id_stop_2
     };
 
 }
 
 
 IOLayerBase::IOLayerBase( QWidget* par,  const char* name )
     : QWidget( par, name )
 {
     m_speedLabel = new QLabel(tr("Speed"), this );
     m_speedBox = new QComboBox(this );
 
@@ -65,95 +67,102 @@ IOLayerBase::IOLayerBase( QWidget* par,  const char* name )
     m_data7 = new QRadioButton(tr("7"), m_groupData );
     m_data8 = new QRadioButton(tr("8"), m_groupData );
 
     m_groupStop = new QHButtonGroup(tr("Stop Bits"), this );
     m_stop1 = new QRadioButton(tr("1"), m_groupStop );
     m_stop15 = new QRadioButton(tr("1.5"), m_groupStop );
     m_stop2 = new QRadioButton(tr("2"), m_groupStop );
 
 
     m_lroot = new QVBoxLayout( this );
     m_lroot->add(m_speedLabel );
     m_lroot->add(m_speedBox );
     m_lroot->add(m_groupFlow );
     m_lroot->add(m_groupParity );
     m_lroot->add( m_groupData );
     m_lroot->add( m_groupStop );
     m_lroot->addStretch(2);
 
     // profiles
     m_speedBox->insertItem(tr("115200 baud"), id_baud_115200 );
     m_speedBox->insertItem(tr("57600 baud"), id_baud_57600   );
     m_speedBox->insertItem(tr("38400 baud"), id_baud_38400   );
     m_speedBox->insertItem(tr("19200 baud"), id_baud_19200   );
     m_speedBox->insertItem(tr("9600 baud"), id_baud_9600     );
-
+    m_speedBox->insertItem(tr("4800 baud"), id_baud_4800     );
+    m_speedBox->insertItem(tr("2400 baud"), id_baud_2400     );
 };
 IOLayerBase::~IOLayerBase() {
 
 }
 void IOLayerBase::setFlow( Flow flo ) {
     switch ( flo ) {
     case Software:
         m_flowSw->setChecked( true );
         break;
     case Hardware:
         m_flowHw->setChecked( true );
         break;
     case None:
         m_flowNone->setChecked( true );
         break;
     }
 }
 
 void IOLayerBase::setParity( Parity par ) {
     switch( par ) {
     case NonePar:
         m_parityNone->setChecked( true );
         break;
     case Odd:
         m_parityOdd->setChecked( true );
         break;
     case Even:
         m_parityEven->setChecked( true );
         break;
     }
 }
 void IOLayerBase::setSpeed( Speed sp ) {
     int index = -1;
     switch( sp ) {
     case Baud_115200:
         index = id_baud_115200;
         break;
     case Baud_57600:
         index = id_baud_57600;
         break;
     case Baud_38400:
         index = id_baud_38400;
         break;
     case Baud_19200:
         index = id_baud_19200;
         break;
+    case Baud_4800:
+        index = id_baud_4800;
+        break;
+    case Baud_2400:
+        index = id_baud_2400;
+        break;
     default:
     case Baud_9600:
         index = id_baud_9600;
         break;
     }
     m_speedBox->setCurrentItem(index );
 }
 
 void IOLayerBase::setData( Data data ) {
     switch( data ) {
     case Data_Five:
         m_data5->setChecked( true );
         break;
     case Data_Six:
         m_data6->setChecked( true );
         break;
     case Data_Seven:
         m_data7->setChecked( true );
         break;
     default:
         m_data8->setChecked( true );
         break;
     }
 }
@@ -187,48 +196,54 @@ IOLayerBase::Flow IOLayerBase::flow()const {
 IOLayerBase::Parity IOLayerBase::parity()const {
     if ( m_parityOdd->isChecked() ) {
         return Odd;
     } else if  ( m_parityEven->isChecked() ) {
         return Even;
     } else {
         return NonePar;
     }
 
 }
 IOLayerBase::Speed IOLayerBase::speed()const{
     switch( m_speedBox->currentItem() ) {
     case id_baud_115200:
         return Baud_115200;
         break;
     case id_baud_57600:
         return Baud_57600;
         break;
     case id_baud_38400:
         return Baud_38400;
         break;
     case id_baud_19200:
         return Baud_19200;
         break;
+    case id_baud_4800:
+        return Baud_4800;
+        break;
+    case id_baud_2400:
+        return Baud_2400;
+        break;
     default:
     case id_baud_9600:
         return Baud_9600;
         break;
     }
 }
 IOLayerBase::Data IOLayerBase::data()const {
     if ( m_data5->isChecked() ) {
         return Data_Five;
     } else if  ( m_data6->isChecked() ) {
         return Data_Six;
     } else if  ( m_data7->isChecked() ) {
         return Data_Seven;
     } else {
         return Data_Eight;
     }
 }
 IOLayerBase::Stop IOLayerBase::stop()const {
     if ( m_stop2->isChecked() ) {
         return Stop_Two;
     } else if  ( m_stop15->isChecked() ) {
         return Stop_OnePointFive;
     } else {
         return Stop_One;
diff --git a/noncore/apps/opie-console/iolayerbase.h b/noncore/apps/opie-console/iolayerbase.h
index e1b96df..214a35c 100644
--- a/noncore/apps/opie-console/iolayerbase.h
+++ b/noncore/apps/opie-console/iolayerbase.h
@@ -1,48 +1,50 @@
 #ifndef OPIE_IO_LAYER_BASE_H
 #define OPIE_IO_LAYER_BASE_H
 
 
 #include <qwidget.h>
 
 class QLabel;
 class QComboBox;
 class QVBoxLayout;
 class QButtonGroup;
 class QRadioButton;
 class QHBoxLayout;
 class IOLayerBase : public QWidget {
 
     Q_OBJECT
 
 public:
     enum Flow { Hardware, Software, None };
     enum Parity{ Odd  =2 , Even =1, NonePar =0 };
     enum Speed{ Baud_115200,
                 Baud_57600,
                 Baud_38400,
                 Baud_19200,
-                Baud_9600 };
+                Baud_9600,
+		Baud_4800,
+		Baud_2400 };
     enum Data { Data_Five =5, Data_Six =6, Data_Seven=7, Data_Eight=8 };
     enum Stop { Stop_One =1, Stop_OnePointFive=15, Stop_Two=2 };
 
     IOLayerBase( QWidget* base,  const char* name = 0l);
     ~IOLayerBase();
 
     void setFlow( Flow flo );
     void setParity( Parity par );
     void setSpeed( Speed speed );
     void setData( Data data );
     void setStop( Stop stop );
 
     Flow flow()const;
     Parity parity()const;
     Speed speed()const;
     Data data()const;
     Stop stop()const;
 private:
     QVBoxLayout* m_lroot;
     QLabel* m_speedLabel;
     QComboBox* m_speedBox;
     QButtonGroup* m_groupFlow,  *m_groupData, *m_groupStop ;
     QRadioButton *m_flowHw, *m_flowSw, *m_flowNone;
 
diff --git a/noncore/apps/opie-console/irdaconfigwidget.cpp b/noncore/apps/opie-console/irdaconfigwidget.cpp
index 059530d..4ee770d 100644
--- a/noncore/apps/opie-console/irdaconfigwidget.cpp
+++ b/noncore/apps/opie-console/irdaconfigwidget.cpp
@@ -57,48 +57,54 @@ void IrdaConfigWidget::load( const Profile& prof ) {
          m_base->setFlow( IOLayerBase::None );
     }
 
     if (rad_parity == 1) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ) {
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed(IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600  );
         break;
     case 38400:
         m_base->setSpeed(IOLayerBase::Baud_38400  );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200  );
         break;
+    case 4800:
+        m_base->setSpeed( IOLayerBase::Baud_4800  );
+        break;
+    case 2400:
+        m_base->setSpeed( IOLayerBase::Baud_2400  );
+        break;
     case 9600:
     default:
         m_base->setSpeed(IOLayerBase::Baud_9600 );
         break;
     }
 
     if ( prof.readEntry("Device").isEmpty() ) return;
     setCurrent( prof.readEntry("Device"), m_deviceCmb );
 
 }
 /*
  * save speed,
  * flow,
  * parity
  */
 void IrdaConfigWidget::save( Profile& prof ) {
     int flow, parity, speed;
     flow = parity = speed = 0;
     prof.writeEntry("Device", m_deviceCmb->currentText() );
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
@@ -115,34 +121,40 @@ void IrdaConfigWidget::save( Profile& prof ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
+    case IOLayerBase::Baud_4800:
+        speed = 4800;
+        break;
+    case IOLayerBase::Baud_2400:
+        speed = 2400;
+        break;
     default:
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     prof.writeEntry("Flow",  flow);
     prof.writeEntry("Parity", parity);
     prof.writeEntry("Speed",  speed);
 }
diff --git a/noncore/apps/opie-console/main.cpp b/noncore/apps/opie-console/main.cpp
index 1bd4338..f61f44e 100644
--- a/noncore/apps/opie-console/main.cpp
+++ b/noncore/apps/opie-console/main.cpp
@@ -1,36 +1,36 @@
 #include <sys/types.h>
 
 #include <stdio.h>
 #include <stdlib.h>
 #include <signal.h>
-
+#include <qfile.h>
 
 #include <qpe/qpeapplication.h>
 
 #include "mainwindow.h"
 
-//#define FSCKED_DISTRIBUTION 1
+#define FSCKED_DISTRIBUTION 1
 #ifdef FSCKED_DISTRIBUTION
 /*
  * The Zaurus rom
  */
 class FixIt {
 public:
     FixIt();
     ~FixIt();
     void fixIt();
     /* no real interested in implementing it */
     void breakIt() {
 
     };
     char* m_file;
 };
 
 FixIt::FixIt() {
     /* the new inittab */
     m_file = "#\n# /etc/inittab"
 "#"
 ""
 "#   0 - halt (Do NOT set initdefault to this)"
 "#   1 - Single user mode"
 "#   2 - Multiuser, without NFS (The same as 3, if you do not have networking)"
@@ -70,41 +70,41 @@ FixIt::FixIt() {
 }
 FixIt::~FixIt() {
 }
 /*
  * the retail Zaurus is broken in many ways
  * one is that pppd is listening on our port...
  * we've to stop it from that and then do kill(SIGHUP,1);
  */
 void FixIt::fixIt() {
     ::rename("/etc/inittab", QPEApplication::qpeDir() + "/etc/inittab" );
     QFile file( "/etc/inittab" );
     if ( file.open(IO_WriteOnly | IO_Raw ) ) {
         file.writeBlock(m_file,strlen(m_file) );
     }
     file.close();
     ::kill( SIGHUP, 1 );
 }
 #endif
 
 int main(int argc, char **argv) {
 // too bad this gives us trouble the taskbar...    argv[0]="embeddedkonsole";
     QPEApplication app( argc, argv );
 
 #ifdef   FSCKED_DISTRIBUTION
-    owarn << "fscked" << oendl; 
+//     owarn << "fscked" << oendl;
     FixIt it;
     it.fixIt();
 #endif
 
     MainWindow mw;
     mw.setCaption(QObject::tr("Opie Console") );
     app.showMainWidget( &mw );
 
     int ap = app.exec();
 
 #ifdef FSCKED_DISTRIBUTION
     /* should add a signal  handler too */
     it.breakIt();
 #endif
     return ap;
 }
diff --git a/noncore/apps/opie-console/modemconfigwidget.cpp b/noncore/apps/opie-console/modemconfigwidget.cpp
index 9fdaf73..90d0b5b 100644
--- a/noncore/apps/opie-console/modemconfigwidget.cpp
+++ b/noncore/apps/opie-console/modemconfigwidget.cpp
@@ -89,77 +89,83 @@ void ModemConfigWidget::load( const Profile& prof ) {
     }
 
 
     if ( rad_parity == 1 ) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ){
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed( IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600 );
         break;
     case 38400:
         m_base->setSpeed( IOLayerBase::Baud_38400 );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200 );
         break;
+    case 4800:
+        m_base->setSpeed( IOLayerBase::Baud_4800 );
+        break;
+    case 2400:
+        m_base->setSpeed( IOLayerBase::Baud_2400 );
+        break;
     case 9600:
     default:
         m_base->setSpeed( IOLayerBase::Baud_9600 );
         break;
     }
 
 
     if ( dbits == 5) {
         m_base->setData( IOLayerBase::Data_Five );
     } else if (rad_flow == 6) {
         m_base->setData( IOLayerBase::Data_Six );
     } else if (rad_flow == 7) {
         m_base->setData( IOLayerBase::Data_Seven );
     } else {
         m_base->setData( IOLayerBase::Data_Eight );
     }
 
     if ( sbits == 2) {
         m_base->setStop( IOLayerBase::Stop_Two );
     } else if ( sbits == 15 ) {
         m_base->setStop( IOLayerBase::Stop_OnePointFive );
     } else {
         m_base->setStop( IOLayerBase::Stop_One );
     }
 
 
     atConf->readConfig( prof );
     if ( prof.readEntry( "Device" ).isEmpty() ) {
-        owarn << "device empty!" << oendl; 
+        owarn << "device empty!" << oendl;
         return;
     }
     setCurrent( prof.readEntry( "Device" ), m_deviceCmb );
 
 
 }
 
 /*
  * save speed,
  * flow,
  * parity
  */
 void ModemConfigWidget::save( Profile& prof ) {
     int flow, parity, speed, data, stop;
     flow = parity = speed = data = stop = 0;
     prof.writeEntry( "Device", m_deviceCmb->currentText() );
 
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
@@ -176,48 +182,54 @@ void ModemConfigWidget::save( Profile& prof ) {
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
+    case IOLayerBase::Baud_4800:
+        speed = 4800;
+        break;
+    case IOLayerBase::Baud_2400:
+        speed = 2400;
+        break;
     }
 
     switch( m_base->data() ) {
     case IOLayerBase::Data_Five:
         data = 5;
         break;
     case IOLayerBase::Data_Six:
         data = 6;
         break;
     case IOLayerBase::Data_Seven:
         data = 7;
         break;
     case IOLayerBase::Data_Eight:
         data = 8;
         break;
     }
 
     switch( m_base->stop() ) {
     case IOLayerBase::Stop_One:
         stop = 1;
         break;
     case IOLayerBase::Stop_OnePointFive:
         stop = 15;
         break;
diff --git a/noncore/apps/opie-console/serialconfigwidget.cpp b/noncore/apps/opie-console/serialconfigwidget.cpp
index 3edf723..5f3547a 100644
--- a/noncore/apps/opie-console/serialconfigwidget.cpp
+++ b/noncore/apps/opie-console/serialconfigwidget.cpp
@@ -61,48 +61,54 @@ void SerialConfigWidget::load( const Profile& prof ) {
         m_base->setFlow( IOLayerBase::None );
     }
 
     if (rad_parity == 1) {
         m_base->setParity( IOLayerBase::Even );
     } else if ( rad_parity == 2 ) {
         m_base->setParity( IOLayerBase::Odd );
     } else {
         m_base->setParity( IOLayerBase::NonePar );
     }
 
     switch( speed ) {
     case 115200:
         m_base->setSpeed(IOLayerBase::Baud_115200 );
         break;
     case 57600:
         m_base->setSpeed( IOLayerBase::Baud_57600  );
         break;
     case 38400:
         m_base->setSpeed(IOLayerBase::Baud_38400  );
         break;
     case 19200:
         m_base->setSpeed( IOLayerBase::Baud_19200  );
         break;
+    case 4800:
+        m_base->setSpeed( IOLayerBase::Baud_4800  );
+        break;
+    case 2400:
+        m_base->setSpeed( IOLayerBase::Baud_2400  );
+        break;
     case 9600:
     default:
         m_base->setSpeed(IOLayerBase::Baud_9600 );
         break;
     }
 
     if ( dbits == 5) {
         m_base->setData( IOLayerBase::Data_Five );
     } else if (rad_flow == 6) {
         m_base->setData( IOLayerBase::Data_Six );
     } else if (rad_flow == 7) {
         m_base->setData( IOLayerBase::Data_Seven );
     } else {
         m_base->setData( IOLayerBase::Data_Eight );
     }
 
     if ( sbits == 2) {
         m_base->setStop( IOLayerBase::Stop_Two );
     } else if ( sbits == 15 ) {
         m_base->setStop( IOLayerBase::Stop_OnePointFive );
     } else {
         m_base->setStop( IOLayerBase::Stop_One );
     }
 
@@ -136,48 +142,54 @@ void SerialConfigWidget::save( Profile& prof ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
+    case IOLayerBase::Baud_4800:
+        speed = 4800;
+        break;
+    case IOLayerBase::Baud_2400:
+        speed = 2400;
+        break;
     default:
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     switch( m_base->data() ) {
     case IOLayerBase::Data_Five:
         data = 5;
         break;
     case IOLayerBase::Data_Six:
         data = 6;
         break;
     case IOLayerBase::Data_Seven:
         data = 7;
         break;
     case IOLayerBase::Data_Eight:
         data = 8;
         break;
     }
 
     switch( m_base->stop() ) {
     case IOLayerBase::Stop_One:
         stop = 1;
diff --git a/noncore/apps/opie-console/terminalwidget.cpp b/noncore/apps/opie-console/terminalwidget.cpp
index 087476b..3e3b8a6 100644
--- a/noncore/apps/opie-console/terminalwidget.cpp
+++ b/noncore/apps/opie-console/terminalwidget.cpp
@@ -1,226 +1,242 @@
 #include "terminalwidget.h"
 
 /* OPIE */
 #include <opie2/odebug.h>
+
 using namespace Opie::Core;
 
 /* QT */
 #include <qlabel.h>
 #include <qcheckbox.h>
 #include <qcombobox.h>
 #include <qradiobutton.h>
 #include <qhgroupbox.h>
 #include <qhbuttongroup.h>
 #include <qlayout.h>
+#include <qhbox.h>
 
 namespace {
     enum TermIds {
         id_term_vt100 = 0,
         id_term_vt102,
         id_term_linux,
         id_term_xterm
     };
 
     enum ColourIds {
         id_term_black,
         id_term_white,
         id_term_green,
         id_term_orange
     };
 
     enum FontIds {
         id_size_small,
         id_size_medium,
         id_size_large
     };
 };
 
 TerminalWidget::TerminalWidget( const QString& name, QWidget* parent,
                                 const char* na )
     : ProfileDialogTerminalWidget( name, parent, na ) {
 
     m_terminal = new QLabel(tr("Terminal Type"), this );
     m_terminalBox = new QComboBox(this);
     m_colorLabel = new QLabel(tr("Color scheme"), this);
     m_colorCmb = new QComboBox(this );
 
-    m_groupSize = new QHButtonGroup(tr("Font size"), this );
-    m_sizeSmall = new QRadioButton(tr("small"),  m_groupSize );
-    m_sizeMedium = new QRadioButton(tr("medium"),  m_groupSize );
-    m_sizeLarge = new QRadioButton(tr("large"),  m_groupSize );
+//     m_groupSize = new QHButtonGroup(tr("Font size"), this );
+    m_groupSize = new QHBox( this );
+    m_fontSelector = new Opie::Ui::OFontSelector( false, m_groupSize );
+
+//      m_sizeSmall = new QRadioButton(tr("small"),  m_groupSize );
+//      m_sizeMedium = new QRadioButton(tr("medium"),  m_groupSize );
+//      m_sizeLarge = new QRadioButton(tr("large"),  m_groupSize );
 
     m_groupConv = new QHGroupBox( tr("Line-break conversions"), this );
     m_convInbound  = new QCheckBox( tr("Inbound"), m_groupConv );
     m_convOutbound = new QCheckBox( tr("Outbound"), m_groupConv );
 
+
     m_groupOptions = new QHGroupBox( tr("Options"), this );
     m_optionEcho = new QCheckBox( tr("Local echo"), m_groupOptions );
     m_optionWrap = new QCheckBox( tr("Line wrap"), m_groupOptions );
 
     m_lroot = new QVBoxLayout( this );
     m_typeBox = new  QVBoxLayout( m_lroot );
     m_colorBox = new QVBoxLayout( m_lroot );
 
     // Layout
     m_typeBox->add( m_terminal );
     m_typeBox->add( m_terminalBox );
     m_lroot->add( m_groupSize );
 
     m_colorBox->add( m_colorLabel );
     m_colorBox->add( m_colorCmb );
 
     m_lroot->add( m_groupConv );
     m_lroot->add( m_groupOptions );
     m_lroot->addStretch( 0 );
 
     // Fill in some options
-    owarn << "Options for terminal box" << oendl; 
+    owarn << "Options for terminal box" << oendl;
     m_terminalBox->insertItem( tr("VT 100"), 0 ); // /*, id_term_vt100*/ );
     m_terminalBox->insertItem( tr("VT 102"), 1 );  // /* , id_term_vt102 */);
     m_terminalBox->insertItem( tr("Linux Console"), 2 ); //, id_term_linux );
     m_terminalBox->insertItem( tr("X-Terminal"), 3 ); //, id_term_xterm );
     //m_terminalBox->insertItem( tr("ANSI"), id_term_ansi );
 
     m_colorCmb->insertItem( tr("black on white"), id_term_black );
     m_colorCmb->insertItem( tr("white on black"), id_term_white );
     m_colorCmb->insertItem( tr("green on black"), id_term_green );
     m_colorCmb->insertItem( tr("orange on black"), id_term_orange );
 
     // signals + slots
     /*
     connect(m_terminalBox, SIGNAL(activated(int) ),
             this, SLOT(slotTermTerm(int) ) );
     connect(m_colorBox, SIGNAL(activated(int) ),
             tis, SLOT(slotTermColor(int) ) );
     connect(m_groupSize, SIGNAL(activated(int) ),
             this, SLOT(slotTermFont(int) ) );
 
     connect(m_optionEcho, SIGNAL(toggled(bool) ),
             this, SLOT(slotTermEcho(bool) ) );
     connect(m_optionWrap, SIGNAL(toggled(bool) ),
             this, SLOT(slotTermWrap(bool) ) );
     connect(m_convInbound, SIGNAL(toggled(bool) ),
             this, SLOT(slotTermInbound(bool) ) );
     connect(m_convOutbound, SIGNAL(toggled(bool) ),
             this, SLOT(slotTermOutbound(bool) ) );
 */
 }
 TerminalWidget::~TerminalWidget() {
 }
 void TerminalWidget::load( const Profile& prof ) {
     int term = prof.readNumEntry("Terminal");
     int color = prof.readNumEntry("Color");
-    int fontsize = prof.readNumEntry("Font");
+//     int fontsize = prof.readNumEntry("Font");
     int opt_echo = prof.readNumEntry("Echo");
     int opt_wrap = prof.readNumEntry("Wrap");
     int opt_inbound = prof.readNumEntry("Inbound");
     int opt_outbound = prof.readNumEntry("Outbound");
 
     switch( term ) {
     case Profile::VT100:
         m_terminalBox->setCurrentItem(id_term_vt100 );
         break;
     case Profile::VT102:
         m_terminalBox->setCurrentItem(id_term_vt102 );
         break;
     case Profile::Linux:
         m_terminalBox->setCurrentItem(id_term_linux );
         break;
     case Profile::XTerm:
         m_terminalBox->setCurrentItem(id_term_xterm );
         break;
     default:
         m_terminalBox->setCurrentItem(id_term_vt102 );
         break;
     };
 
     switch( color ) {
     case Profile::Black:
         m_colorCmb->setCurrentItem(id_term_black );
         break;
     case Profile::White:
         m_colorCmb->setCurrentItem(id_term_white );
         break;
     case Profile::Green:
         m_colorCmb->setCurrentItem(id_term_green );
         break;
     case Profile::Orange:
         m_colorCmb->setCurrentItem(id_term_orange );
         break;
     default:
         break;
     };
 
-    switch( fontsize ) {
-    case Profile::Micro:
-        m_sizeSmall->setChecked(true );
-        break;
-    case Profile::Small:
-        m_sizeMedium->setChecked(true );
-        break;
-    case Profile::Medium:
-        m_sizeLarge->setChecked( true );
-        break;
-    default:
-        m_sizeMedium->setChecked(true );
-        break;
-    };
+
+    m_fontSelector->setSelectedFont( prof.readEntry( "Font"), prof.readEntry( "FontStyle"), prof.readNumEntry( "FontSize"  ), prof.readEntry( "FontCharset") );
+
+//     switch( fontsize ) {
+//     case Profile::Micro:
+//         m_sizeSmall->setChecked(true );
+//         break;
+//     case Profile::Small:
+//         m_sizeMedium->setChecked(true );
+//         break;
+//     case Profile::Medium:
+//         m_sizeLarge->setChecked( true );
+//         break;
+//     default:
+//         m_sizeMedium->setChecked(true );
+//         break;
+//     };
 
     if (opt_echo) m_optionEcho->setChecked( true );
     if (opt_wrap) m_optionWrap->setChecked( true );
     if (opt_inbound) m_convInbound->setChecked( true );
     if (opt_outbound) m_convOutbound->setChecked( true );
 
 }
 void TerminalWidget::save( Profile& profile ) {
     switch(m_terminalBox->currentItem() ) {
     case id_term_vt100:
         profile.writeEntry("Terminal", Profile::VT100 );
         break;
     case id_term_vt102:
         profile.writeEntry("Terminal", Profile::VT102 );
         break;
     case id_term_linux:
         profile.writeEntry("Terminal", Profile::Linux );
         break;
     case id_term_xterm:
         profile.writeEntry("Terminal", Profile::XTerm );
         break;
     //case id_term_ansi:
     //    profile.writeEntry("Terminal", Profile::VT102 );
     //    break;
     default:
         break;
     };
 
     // color
     switch(m_colorCmb->currentItem() ) {
     case id_term_black:
         profile.writeEntry("Color", Profile::Black );
         break;
     case id_term_white:
         profile.writeEntry("Color", Profile::White );
         break;
     case id_term_green:
         profile.writeEntry("Color", Profile::Green );
         break;
     case id_term_orange:
         profile.writeEntry("Color", Profile::Orange );
         break;
     default:
         break;
     };
 
-    if (m_sizeSmall->isChecked() ) {
-        profile.writeEntry("Font", Profile::Micro );
-    }else if (m_sizeMedium->isChecked() ) {
-        profile.writeEntry("Font", Profile::Small );
-    }else {
-        profile.writeEntry("Font", Profile::Medium );
-    }
+
+    profile.writeEntry( "FontSize", m_fontSelector->fontSize() );
+    profile.writeEntry( "FontStyle", m_fontSelector->fontStyle() );
+    profile.writeEntry( "FontCharset", m_fontSelector->fontCharSet() );
+    profile.writeEntry( "Font", m_fontSelector->fontFamily() );
+
+
+//     if (m_sizeSmall->isChecked() ) {
+//         profile.writeEntry("Font", Profile::Micro );
+//     }else if (m_sizeMedium->isChecked() ) {
+//         profile.writeEntry("Font", Profile::Small );
+//     }else {
+//         profile.writeEntry("Font", Profile::Medium );
+//     }
 
     profile.writeEntry("Echo", m_optionEcho->isChecked() );
     profile.writeEntry("Wrap", m_optionWrap->isChecked() );
     profile.writeEntry("Inbound", m_convInbound->isChecked() );
     profile.writeEntry("Outbound",m_convOutbound->isChecked() );
 }
diff --git a/noncore/apps/opie-console/terminalwidget.h b/noncore/apps/opie-console/terminalwidget.h
index 217fea7..2bd38d6 100644
--- a/noncore/apps/opie-console/terminalwidget.h
+++ b/noncore/apps/opie-console/terminalwidget.h
@@ -1,48 +1,52 @@
 #ifndef OPIE_TERMINAL_WIDGET_H
 #define OPIE_TERMINAL_WIDGET_H
 
 #include "profiledialogwidget.h"
 
+#include <opie2/ofontselector.h>
+
 class QComboBox;
 class QLabel;
 class QVBoxLayout;
 class QHBoxLayout;
 class QButtonGroup;
 class QRadioButton;
 class QCheckBox;
 class QHGroupBox;
 class QHBox;
 
+
 class TerminalWidget : public ProfileDialogTerminalWidget {
 
     Q_OBJECT
 
 public:
     TerminalWidget(const QString& name, QWidget* wid,
                    const char* na ) ;
     ~TerminalWidget();
 
     void load( const Profile& );
     void save( Profile& );
 
 private:
     QVBoxLayout* m_lroot,  *m_typeBox, *m_colorBox;
 
     QLabel* m_terminal,  *m_colorLabel;
 
     QComboBox* m_terminalBox, *m_colorCmb;
 
-    QButtonGroup* m_groupSize;
+    QHBox* m_groupSize;
 
     QRadioButton* m_sizeSmall, *m_sizeMedium,
         *m_sizeLarge;
 
     QHGroupBox *m_groupConv, *m_groupOptions;
 
     QCheckBox *m_convInbound,
         *m_convOutbound, *m_optionEcho,
         *m_optionWrap;
 
+    Opie::Ui::OFontSelector *m_fontSelector;
 };
 
 #endif