fix bug 0001185

and state that syncing system time depends on AlarmServer
using atd or opie-alarm

2 files changed, 17 insertions, 12 deletions

diff --git a/library/alarmserver.cpp b/library/alarmserver.cpp
index 2ea4025..a75fc7e 100644
--- a/library/alarmserver.cpp
+++ b/library/alarmserver.cpp
@@ -51,399 +51,402 @@ struct timerEventItem
         {
                 return ( UTCtime == right.UTCtime
                          && channel == right.channel
                          && message == right.message
                          && data == right.data );
         }
 };
 
 class TimerReceiverObject : public QObject
 {
 public:
         TimerReceiverObject()
         { }
         ~TimerReceiverObject()
         { }
         void resetTimer();
         void setTimerEventItem();
         void deleteTimer();
 protected:
         void timerEvent( QTimerEvent *te );
 
 #ifdef USE_ATD
 private:
         QString atfilename;
 #endif
 };
 
 TimerReceiverObject *timerEventReceiver = NULL;
 QList<timerEventItem> timerEventList;
 timerEventItem *nearestTimerEvent = NULL;
 
 
 // set the timer to go off on the next event in the list
 void setNearestTimerEvent()
 {
         nearestTimerEvent = NULL;
         QListIterator<timerEventItem> it( timerEventList );
         if ( *it )
                 nearestTimerEvent = *it;
         for ( ; *it; ++it )
                 if ( (*it)->UTCtime < nearestTimerEvent->UTCtime )
                         nearestTimerEvent = *it;
         if (nearestTimerEvent)
                 timerEventReceiver->resetTimer();
         else
                 timerEventReceiver->deleteTimer();
 }
 
 
 //store current state to file
 //Simple implementation. Should run on a timer.
 
 static void saveState()
 {
         QString savefilename = Global::applicationFileName( "AlarmServer", "saveFile" );
         if ( timerEventList.isEmpty() ) {
                 unlink( savefilename );
                 return ;
         }
 
         QFile savefile(savefilename + ".new");
         if ( savefile.open(IO_WriteOnly) ) {
                 QDataStream ds( &savefile );
 
                 //save
 
                 QListIterator<timerEventItem> it( timerEventList );
                 for ( ; *it; ++it ) {
                         ds << it.current()->UTCtime;
                         ds << it.current()->channel;
                         ds << it.current()->message;
                         ds << it.current()->data;
                 }
 
 
                 savefile.close();
                 unlink( savefilename );
                 QDir d;
                 d.rename(savefilename + ".new", savefilename);
 
         }
 }
 
 /*!
   Sets up the alarm server. Restoring to previous state (session management).
  */
 void AlarmServer::initialize()
 {
         //read autosave file and put events in timerEventList
 
         QString savefilename = Global::applicationFileName( "AlarmServer", "saveFile" );
 
         QFile savefile(savefilename);
         if ( savefile.open(IO_ReadOnly) ) {
                 QDataStream ds( &savefile );
                 while ( !ds.atEnd() ) {
                         timerEventItem *newTimerEventItem = new timerEventItem;
                         ds >> newTimerEventItem->UTCtime;
                         ds >> newTimerEventItem->channel;
                         ds >> newTimerEventItem->message;
                         ds >> newTimerEventItem->data;
                         timerEventList.append( newTimerEventItem );
                 }
                 savefile.close();
                 if (!timerEventReceiver)
                         timerEventReceiver = new TimerReceiverObject;
                 setNearestTimerEvent();
         }
 }
 
 
 #ifdef USE_ATD
 
 static const char* atdir = "/var/spool/at/";
 
 static bool triggerAtd( bool writeHWClock = FALSE )
 {
         QFile trigger(QString(atdir) + "trigger");
         if ( trigger.open(IO_WriteOnly | IO_Raw) ) {
                 if ( trigger.writeBlock("\n", 2) != 2 ) {
                         QMessageBox::critical( 0, QObject::tr( "Out of Space" ),
                                                QObject::tr( "Unable to schedule alarm.\nFree some memory and try again." ) );
                         trigger.close();
                         QFile::remove
                                 ( trigger.name() );
                         return FALSE;
                 }
                 return TRUE;
         }
         return FALSE;
 }
 
 #else
 
 static bool writeResumeAt ( time_t wakeup )
 {
         FILE *fp = ::fopen ( "/var/run/resumeat", "w" );
 
         if ( fp ) {
                 ::fprintf ( fp, "%d\n", (int) wakeup );
                 ::fclose ( fp );
         }
         else
                 qWarning ( "Failed to write wakeup time to /var/run/resumeat" );
 
         return ( fp );
 }
 
 #endif
 
 void TimerReceiverObject::deleteTimer()
 {
 #ifdef USE_ATD
         if ( !atfilename.isEmpty() ) {
                 unlink( atfilename );
                 atfilename = QString::null;
                 triggerAtd( FALSE );
         }
 #else
         writeResumeAt ( 0 );
 #endif
 }
 
 void TimerReceiverObject::resetTimer()
 {
         const int maxsecs = 2147000;
         QDateTime nearest = TimeConversion::fromUTC(nearestTimerEvent->UTCtime);
         QDateTime now = QDateTime::currentDateTime();
         if ( nearest < now )
                 nearest = now;
         int secs = TimeConversion::secsTo( now, nearest );
         if ( secs > maxsecs ) {
                 // too far for millisecond timing
                 secs = maxsecs;
         }
 
         // System timer (needed so that we wake from deep sleep),
         // from the Epoch in seconds.
         //
         int at_secs = TimeConversion::toUTC(nearest);
         // qDebug("reset timer to %d seconds from Epoch",at_secs);
 
 #ifdef USE_ATD
 
         QString fn = atdir + QString::number(at_secs) + "."
                      + QString::number(getpid());
         if ( fn != atfilename ) {
                 QFile atfile(fn + ".new");
                 if ( atfile.open(IO_WriteOnly | IO_Raw) ) {
                         int total_written;
 
                         // just wake up and delete the at file
                         QString cmd = "#!/bin/sh\nrm " + fn;
                         total_written = atfile.writeBlock(cmd.latin1(), cmd.length());
                         if ( total_written != int(cmd.length()) ) {
                                 QMessageBox::critical( 0, tr("Out of Space"),
                                                        tr("Unable to schedule alarm.\n"
                                                           "Please free up space and try again") );
                                 atfile.close();
                                 QFile::remove
                                         ( atfile.name() );
                                 return ;
                         }
                         atfile.close();
                         unlink( atfilename );
                         QDir d;
                         d.rename(fn + ".new", fn);
                         chmod(fn.latin1(), 0755);
                         atfilename = fn;
                         triggerAtd( FALSE );
                 }
                 else {
                         qWarning("Cannot open atd file %s", fn.latin1());
                 }
         }
 #else
     writeResumeAt ( at_secs );
 
 #endif
 
         // Qt timers (does the actual alarm)
         // from now in milliseconds
         //
         qDebug("AlarmServer waiting %d seconds", secs);
         startTimer( 1000 * secs + 500 );
 }
 
 void TimerReceiverObject::timerEvent( QTimerEvent * )
 {
         bool needSave = FALSE;
         killTimers();
         if (nearestTimerEvent) {
                 if ( nearestTimerEvent->UTCtime
                         <= TimeConversion::toUTC(QDateTime::currentDateTime()) ) {
 #ifndef QT_NO_COP
                         QCopEnvelope e( nearestTimerEvent->channel,
                                         nearestTimerEvent->message );
                         e << TimeConversion::fromUTC( nearestTimerEvent->UTCtime )
                         << nearestTimerEvent->data;
 #endif
 
                         timerEventList.remove( nearestTimerEvent );
                         needSave = TRUE;
                 }
                 setNearestTimerEvent();
         }
         else {
                 resetTimer();
         }
         if ( needSave )
                 saveState();
 }
 
 /*!
   \class AlarmServer alarmserver.h
   \brief The AlarmServer class allows alarms to be scheduled and unscheduled.
- 
+
     Applications can schedule alarms with addAlarm() and can
     unschedule alarms with deleteAlarm(). When the time for an alarm
     to go off is reached the specified \link qcop.html QCop\endlink
     message is sent on the specified channel (optionally with
     additional data).
- 
+
     Scheduling an alarm using this class is important (rather just using
     a QTimer) since the machine may be asleep and needs to get woken up using
     the Linux kernel which implements this at the kernel level to minimize
     battery usage while asleep.
- 
+
     \ingroup qtopiaemb
     \sa QCopEnvelope
 */
 
 /*!
   Schedules an alarm to go off at (or soon after) time \a when. When
   the alarm goes off, the \link qcop.html QCop\endlink \a message will
   be sent to \a channel, with \a data as a parameter.
- 
+
   If this function is called with exactly the same data as a previous
   call the subsequent call is ignored, so there is only ever one alarm
   with a given set of parameters.
- 
+
   \sa deleteAlarm()
 */
 void AlarmServer::addAlarm ( QDateTime when, const QCString& channel,
                              const QCString& message, int data)
 {
         if ( qApp->type() == QApplication::GuiServer ) {
                 bool needSave = FALSE;
                 // Here we are the server so either it has been directly called from
                 // within the server or it has been sent to us from a client via QCop
                 if (!timerEventReceiver)
                         timerEventReceiver = new TimerReceiverObject;
 
                 timerEventItem *newTimerEventItem = new timerEventItem;
                 newTimerEventItem->UTCtime = TimeConversion::toUTC( when );
                 newTimerEventItem->channel = channel;
                 newTimerEventItem->message = message;
                 newTimerEventItem->data = data;
                 // explore the case of already having the event in here...
                 QListIterator<timerEventItem> it( timerEventList );
                 for ( ; *it; ++it )
                         if ( *(*it) == *newTimerEventItem )
                                 return ;
                 // if we made it here, it is okay to add the item...
                 timerEventList.append( newTimerEventItem );
                 needSave = TRUE;
                 // quicker than using setNearestTimerEvent()
                 if ( nearestTimerEvent ) {
                         if (newTimerEventItem->UTCtime < nearestTimerEvent->UTCtime) {
                                 nearestTimerEvent = newTimerEventItem;
                                 timerEventReceiver->killTimers();
                                 timerEventReceiver->resetTimer();
                         }
                 }
                 else {
                         nearestTimerEvent = newTimerEventItem;
                         timerEventReceiver->resetTimer();
                 }
                 if ( needSave )
                         saveState();
         }
         else {
 #ifndef QT_NO_COP
                 QCopEnvelope e( "QPE/System", "addAlarm(QDateTime,QCString,QCString,int)" );
                 e << when << channel << message << data;
 #endif
 
         }
 }
 
 /*!
   Deletes previously scheduled alarms which match \a when, \a channel,
   \a message, and \a data.
- 
+
   Passing null values for \a when, \a channel, or for the \link
   qcop.html QCop\endlink \a message, acts as a wildcard meaning "any".
   Similarly, passing -1 for \a data indicates "any".
- 
+
   If there is no matching alarm, nothing happens.
- 
+
   \sa addAlarm()
- 
+
 */
 void AlarmServer::deleteAlarm (QDateTime when, const QCString& channel, const QCString& message, int data)
 {
         if ( qApp->type() == QApplication::GuiServer) {
                 bool needSave = FALSE;
                 if ( timerEventReceiver != NULL ) {
                         timerEventReceiver->killTimers();
 
                         // iterate over the list of events
                         QListIterator<timerEventItem> it( timerEventList );
                         time_t deleteTime = TimeConversion::toUTC( when );
                         for ( ; *it; ++it ) {
                                 // if its a match, delete it
                                 if ( ( (*it)->UTCtime == deleteTime || when.isNull() )
                                         && ( channel.isNull() || (*it)->channel == channel )
                                         && ( message.isNull() || (*it)->message == message )
                                         && ( data == -1 || (*it)->data == data ) ) {
                                         // if it's first, then we need to update the timer
                                         if ( (*it) == nearestTimerEvent ) {
                                                 timerEventList.remove(*it);
                                                 setNearestTimerEvent();
                                         }
                                         else {
                                                 timerEventList.remove(*it);
                                         }
                                         needSave = TRUE;
                                 }
                         }
                         if ( nearestTimerEvent )
                                 timerEventReceiver->resetTimer();
                 }
                 if ( needSave )
                         saveState();
         }
         else {
 #ifndef QT_NO_COP
                 QCopEnvelope e( "QPE/System", "deleteAlarm(QDateTime,QCString,QCString,int)" );
                 e << when << channel << message << data;
 #endif
 
         }
 }
 
 /*!
-  Writes the system clock to the hardware clock.
+  The implementation depends on the mode of AlarmServer. If the AlarmServer
+  uses atd the current system time will be written to the hardware clock.
+  If the AlarmServer relies on opie-alarm the time will be written once the
+  device gets suspended. opie-alarm is used by the Zaurus, iPAQs and SIMpad
 */
 void Global::writeHWClock()
 {
 #ifdef USE_ATD
         if ( !triggerAtd( TRUE ) ) {
                 // atd not running? set it ourselves
                 system("/sbin/hwclock --systohc"); // ##### UTC?
         }
 #else
         // hwclock is written on suspend
 #endif
 }
diff --git a/library/global.cpp b/library/global.cpp
index 5c89430..90954fe 100644
--- a/library/global.cpp
+++ b/library/global.cpp
@@ -1,473 +1,475 @@
 /**********************************************************************
 ** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
 **
 ** This file is part of the Qtopia Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
 **
 **********************************************************************/
 #define QTOPIA_INTERNAL_LANGLIST
 #include <qpe/qpedebug.h>
 #include <qpe/global.h>
 #include <qpe/qdawg.h>
 #include <qpe/qpeapplication.h>
 #include <qpe/resource.h>
 #include <qpe/storage.h>
 #include <qpe/applnk.h>
 #include <qpe/qcopenvelope_qws.h>
 
 #include <qfile.h>
 #include <qlabel.h>
 #include <qtimer.h>
 #include <qmap.h>
 #include <qdict.h>
 #include <qdir.h>
 #include <qmessagebox.h>
 #include <qregexp.h>
 
 #include <stdlib.h>
 #include <sys/stat.h>
 #include <sys/wait.h>
 #include <sys/types.h>
 #include <fcntl.h>
 #include <unistd.h>
 #include <errno.h>
 
 #include <qwindowsystem_qws.h> // for qwsServer
 #include <qdatetime.h>
 
 #include <qfile.h>
 
 namespace {
   // checks if the storage should be searched
   bool checkStorage(const QString &path ){ // this is a small Config replacement cause config is too limited -zecke
     QFile file(path );
     if(!file.open(IO_ReadOnly ) )
        return true;
 
     QByteArray array = file.readAll();
     QStringList list = QStringList::split('\n', QString( array ) );
     for(QStringList::Iterator it = list.begin(); it != list.end(); ++it ){
       if( (*it).startsWith("autocheck = 0" ) ){
         return false;
       }else if( (*it).startsWith("autocheck = 1" ) ){
         return true;
       }
     }
     return true;
   }
 }
 
 //#include "quickexec_p.h"
 
 class Emitter : public QObject {
     Q_OBJECT
 public:
     Emitter( QWidget* receiver, const QString& document )
     {
         connect(this, SIGNAL(setDocument(const QString&)),
             receiver, SLOT(setDocument(const QString&)));
         emit setDocument(document);
         disconnect(this, SIGNAL(setDocument(const QString&)),
                receiver, SLOT(setDocument(const QString&)));
     }
 
 signals:
     void setDocument(const QString&);
 };
 
 
 class StartingAppList : public QObject {
     Q_OBJECT
 public:
     static void add( const QString& name );
     static bool isStarting( const QString name );
 private slots:
     void handleNewChannel( const QString &);
 private:
     StartingAppList( QObject *parent=0, const char* name=0 ) ;
 
     QDict<QTime> dict;
     static StartingAppList *appl;
 };
 
 StartingAppList* StartingAppList::appl = 0;
 
 StartingAppList::StartingAppList( QObject *parent, const char* name )
     :QObject( parent, name )
 {
 #if QT_VERSION >= 232 && defined(QWS)
     connect( qwsServer, SIGNAL( newChannel(const QString&)),
              this, SLOT( handleNewChannel(const QString&)) );
 #endif
     dict.setAutoDelete( TRUE );
 }
 
 void StartingAppList::add( const QString& name )
 {
 #if QT_VERSION >= 232  && !defined(QT_NO_COP)
     if ( !appl )
         appl = new StartingAppList;
     QTime *t = new QTime;
     t->start();
     appl->dict.insert( "QPE/Application/" + name, t );
 #endif
 }
 
 bool StartingAppList::isStarting( const QString name )
 {
 #if QT_VERSION >= 232  && !defined(QT_NO_COP)
     if ( appl ) {
         QTime *t  = appl->dict.find( "QPE/Application/" + name );
         if ( !t )
             return FALSE;
         if ( t->elapsed() > 10000 ) {
             // timeout in case of crash or something
             appl->dict.remove( "QPE/Application/" + name );
             return FALSE;
         }
         return TRUE;
     }
 #endif
     return FALSE;
 }
 
 void StartingAppList::handleNewChannel( const QString & name )
 {
 #if QT_VERSION >= 232  && !defined(QT_NO_COP)
     dict.remove( name );
 #endif
 }
 
 static bool docDirCreated = FALSE;
 static QDawg* fixed_dawg = 0;
 static QDict<QDawg> *named_dawg = 0;
 
 static QString qpeDir()
 {
     QString dir = getenv("OPIEDIR");
     if ( dir.isEmpty() ) dir = "..";
     return dir;
 }
 
 static QString dictDir()
 {
     return qpeDir() + "/etc/dict";
 }
 
 /*!
   \class Global global.h
   \brief The Global class provides application-wide global functions.
 
   The Global functions are grouped as follows:
   \tableofcontents
 
   \section1 User Interface
 
   The statusMessage() function provides short-duration messages to the
   user. The showInputMethod() function shows the current input method,
   and hideInputMethod() hides the input method.
 
   \section1 Document related
 
   The findDocuments() function creates a set of \link doclnk.html
   DocLnk\endlink objects in a particular folder.
 
   \section1 Filesystem related
 
   Global provides an applicationFileName() function that returns the
   full path of an application-specific file.
 
   The execute() function runs an application.
 
   \section1 Word list related
 
   A list of words relevant to the current locale is maintained by the
   system. The list is held in a \link qdawg.html DAWG\endlink
   (implemented by the QDawg class). This list is used, for example, by
   the pickboard input method.
 
   The global QDawg is returned by fixedDawg(); this cannot be updated.
   An updatable copy of the global QDawg is returned by addedDawg().
   Applications may have their own word lists stored in \l{QDawg}s
   which are returned by dawg(). Use addWords() to add words to the
   updateable copy of the global QDawg or to named application
   \l{QDawg}s.
 
   \section1 Quoting
 
   The shellQuote() function quotes a string suitable for passing to a
   shell. The stringQuote() function backslash escapes '\' and '"'
   characters.
 
   \section1 Hardware
 
-  The writeHWClock() function sets the hardware clock to the system
-  clock's date and time.
+  The implementation of the writeHWClock() function depends on the AlarmServer
+  implementation. If the AlarmServer is using atd the clock will be synced to
+  hardware. If opie-alarm is used the hardware clock will be synced before
+  suspending the device. opie-alarm is used by iPAQ and Zaurii implementation
 
   \ingroup qtopiaemb
 */
 
 /*!
   \internal
 */
 Global::Global()
 {
 }
 
 /*!
   Returns the unchangeable QDawg that contains general
   words for the current locale.
 
   \sa addedDawg()
 */
 const QDawg& Global::fixedDawg()
 {
     if ( !fixed_dawg ) {
         if ( !docDirCreated )
             createDocDir();
 
         fixed_dawg = new QDawg;
         QString dawgfilename = dictDir() + "/dawg";
         QString words_lang;
         QStringList langs = Global::languageList();
         for (QStringList::ConstIterator it = langs.begin(); it!=langs.end(); ++it) {
             QString lang = *it;
             words_lang = dictDir() + "/words." + lang;
             QString dawgfilename_lang = dawgfilename + "." + lang;
             if ( QFile::exists(dawgfilename_lang) ||
                  QFile::exists(words_lang) ) {
                 dawgfilename = dawgfilename_lang;
                 break;
             }
         }
         QFile dawgfile(dawgfilename);
 
         if ( !dawgfile.exists() ) {
             QString fn = dictDir() + "/words";
             if ( QFile::exists(words_lang) )
                 fn = words_lang;
             QFile in(fn);
             if ( in.open(IO_ReadOnly) ) {
                 fixed_dawg->createFromWords(&in);
                 dawgfile.open(IO_WriteOnly);
                 fixed_dawg->write(&dawgfile);
                 dawgfile.close();
             }
         } else {
             fixed_dawg->readFile(dawgfilename);
         }
     }
 
     return *fixed_dawg;
 }
 
 /*!
   Returns the changeable QDawg that contains general
   words for the current locale.
 
   \sa fixedDawg()
 */
 const QDawg& Global::addedDawg()
 {
     return dawg("local");
 }
 
 /*!
   Returns the QDawg with the given \a name.
   This is an application-specific word list.
 
   \a name should not contain "/".
 */
 const QDawg& Global::dawg(const QString& name)
 {
     createDocDir();
     if ( !named_dawg )
         named_dawg = new QDict<QDawg>;
     QDawg* r = named_dawg->find(name);
     if ( !r ) {
         r = new QDawg;
         named_dawg->insert(name,r);
         QString dawgfilename = applicationFileName("Dictionary", name ) + ".dawg";
         QFile dawgfile(dawgfilename);
         if ( dawgfile.open(IO_ReadOnly) )
             r->readFile(dawgfilename);
     }
     return *r;
 }
 
 /*!
   \overload
   Adds \a wordlist to the addedDawg().
 
   Note that the addition of words persists between program executions
   (they are saved in the dictionary files), so you should confirm the
   words with the user before adding them.
 */
 void Global::addWords(const QStringList& wordlist)
 {
     addWords("local",wordlist);
 }
 
 /*!
   \overload
   Adds \a wordlist to the addedDawg().
 
   Note that the addition of words persists between program executions
   (they are saved in the dictionary files), so you should confirm the
   words with the user before adding them.
 */
 void Global::addWords(const QString& dictname, const QStringList& wordlist)
 {
     QDawg& d = (QDawg&)dawg(dictname);
     QStringList all = d.allWords() + wordlist;
     d.createFromWords(all);
 
     QString dawgfilename = applicationFileName("Dictionary", dictname) + ".dawg";
     QFile dawgfile(dawgfilename);
     if ( dawgfile.open(IO_WriteOnly) ) {
         d.write(&dawgfile);
         dawgfile.close();
     }
 
     // #### Re-read the dawg here if we use mmap().
 
     // #### Signal other processes to re-read.
 }
 
 
 /*!
   Returns the full path for the application called \a appname, with the
   given \a filename. Returns QString::null if there was a problem creating
   the directory tree for \a appname.
   If \a filename contains "/", it is the caller's responsibility to
   ensure that those directories exist.
 */
 QString Global::applicationFileName(const QString& appname, const QString& filename)
 {
     QDir d;
     QString r = getenv("HOME");
     r += "/Applications/";
     if ( !QFile::exists( r ) )
         if ( d.mkdir(r) == false )
             return QString::null;
     r += appname;
     if ( !QFile::exists( r ) )
         if ( d.mkdir(r) == false )
             return QString::null;
     r += "/"; r += filename;
     return r;
 }
 
 /*!
   \internal
 */
 void Global::createDocDir()
 {
     if ( !docDirCreated ) {
         docDirCreated = TRUE;
         mkdir( QPEApplication::documentDir().latin1(), 0755 );
     }
 }
 
 
 /*!
   Displays a status \a message to the user. This usually appears
   in the taskbar for a short amount of time, then disappears.
 */
 void Global::statusMessage(const QString& message)
 {
 #if !defined(QT_NO_COP)
     QCopEnvelope e( "QPE/TaskBar", "message(QString)" );
     e << message;
 #endif
 }
 
 /*!
   \internal
 */
 void Global::applyStyle()
 {
 #if !defined(QT_NO_COP)
     QCopChannel::send( "QPE/System", "applyStyle()" );
 #else
     ((QPEApplication *)qApp)->applyStyle(); // apply without needing QCop for floppy version
 #endif
 }
 
 /*!
   \internal
 */
 QWidget *Global::shutdown( bool )
 {
 #if !defined(QT_NO_COP)
     QCopChannel::send( "QPE/System", "shutdown()" );
 #endif
     return 0;
 }
 
 /*!
   \internal
 */
 QWidget *Global::restart( bool )
 {
 #if !defined(QT_NO_COP)
     QCopChannel::send( "QPE/System", "restart()" );
 #endif
     return 0;
 }
 
 /*!
   Explicitly show the current input method.
 
   Input methods are indicated in the taskbar by a small icon. If the
   input method is activated (shown) then it takes up some proportion
   of the bottom of the screen, to allow the user to interact (input
   characters) with it.
 
   \sa hideInputMethod()
 */
 void Global::showInputMethod()
 {
 #if !defined(QT_NO_COP)
     QCopChannel::send( "QPE/TaskBar", "showInputMethod()" );
 #endif
 }
 
 /*!
   Explicitly hide the current input method.
 
   The current input method is still indicated in the taskbar, but no
   longer takes up screen space, and can no longer be interacted with.
 
   \sa showInputMethod()
 */
 void Global::hideInputMethod()
 {
 #if !defined(QT_NO_COP)
     QCopChannel::send( "QPE/TaskBar", "hideInputMethod()" );
 #endif
 }
 
 
 /*!
   \internal
 */
 bool Global::isBuiltinCommand( const QString &name )
 {
     if(!builtin)
         return FALSE; // yes, it can happen
     for (int i = 0; builtin[i].file; i++) {
         if ( builtin[i].file == name ) {
             return TRUE;