fixed a lot of errors and sloppyness to make it compile again...

11 files changed, 75 insertions, 29 deletions

diff --git a/noncore/apps/opie-console/MyPty.cpp b/noncore/apps/opie-console/MyPty.cpp
index 23d4966..b2f6a74 100644
--- a/noncore/apps/opie-console/MyPty.cpp
+++ b/noncore/apps/opie-console/MyPty.cpp
@@ -179,68 +179,68 @@ int MyPty::run(const char* cmd, QStrList &, const char*, int)
     EnvironmentMap::Iterator it;
     for (it = m_env.begin(); it != m_env.end(); it++) {
         setenv(it.key().latin1(), it.data().latin1(), 1);
     }
 	if (getuid() == 0) {
 	    char msg[] = "WARNING: You are running this shell as root!\n";
 	    write(ttyfd, msg, sizeof(msg));
 	}
 	execl(cmd, cmd, 0);
 
 	donePty();
 	exit(-1);
     }
 
     // parent - continue as a widget
     delete m_sn_r;
     m_sn_r = new QSocketNotifier(m_fd,QSocketNotifier::Read,this);
     delete m_sn_e;
     m_sn_e = new QSocketNotifier(m_fd,QSocketNotifier::Exception,this);
     connect(m_sn_r,SIGNAL(activated(int)),this,SLOT(readPty()));
     connect(m_sn_e,SIGNAL(activated(int)),this,SLOT(error()));
 
     return 0;
 }
 
 int MyPty::openPty()
 {
     // This is code from the Qt DumbTerminal example
     int ptyfd = -1;
 
 #ifdef HAVE_OPENPTY
     int ttyfd;
-    if ( openpty(&ptyfd,&ttyfd,ttynam,0,0) )
+    if ( openpty(&ptyfd,&ttyfd,m_ttynam,0,0) )
 	ptyfd = -1;
     else
-	close(ttyfd); // we open the ttynam ourselves.
+	::close(ttyfd); // we open the ttynam ourselves.
 #else
     for (const char* c0 = "pqrstuvwxyzabcde"; ptyfd < 0 && *c0 != 0; c0++) {
 	for (const char* c1 = "0123456789abcdef"; ptyfd < 0 && *c1 != 0; c1++) {
 	    sprintf(m_ptynam,"/dev/pty%c%c",*c0,*c1);
 	    sprintf(m_ttynam,"/dev/tty%c%c",*c0,*c1);
 	    if ((ptyfd = ::open(m_ptynam,O_RDWR)) >= 0) {
 		if (geteuid() != 0 && !access(m_ttynam,R_OK|W_OK) == 0) {
 		    ::close(ptyfd);
 		    ptyfd = -1;
 		}
 	    }
 	}
     }
 #endif
 
     if ( ptyfd < 0 ) {
 //	qApp->exit(1);
 	return -1;
     }
 
     return ptyfd;
 }
 
 /*!
     Create an instance.
 */
 MyPty::MyPty(const Profile& prof) : m_cpid(0)
 {
 
     int term = prof.readNumEntry("Terminal", Profile::VT100 );
     switch( term ) {
     default:
diff --git a/noncore/apps/opie-console/io_bt.cpp b/noncore/apps/opie-console/io_bt.cpp
index 8dd8151..37bf797 100644
--- a/noncore/apps/opie-console/io_bt.cpp
+++ b/noncore/apps/opie-console/io_bt.cpp
@@ -49,32 +49,44 @@ bool IOBt::open() {
     } else {
         // directly to the normal serial
         // TODO: look first if the connection really exists. ( is set up )
 
         ret =IOSerial::open();
     }
     return ret;
 }
 
 void IOBt::reload( const Profile &config ) {
     m_device = config.readEntry("Device", BT_DEFAULT_DEVICE);
     m_mac = config.readEntry("Mac", BT_DEFAULT_MAC);
     m_baud = config.readNumEntry("Baud", BT_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", BT_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", BT_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", BT_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", BT_DEFAULT_FLOW);
 }
 
 
 QString IOBt::identifier() const {
     return "bluetooth";
 }
 
 QString IOBt::name() const {
     return "BLuetooth IO Layer";
 }
 
 void IOBt::slotExited( OProcess* proc ){
     close();
     delete proc;
 }
+
+QBitArray IOBt::supports() const {
+    return QBitArray( 3 );
+}
+
+bool IOBt::isConnected() {
+    return false;
+}
+
+void IOBt::send(const QByteArray &data) {
+    qDebug( "Please overload me..." );
+}
diff --git a/noncore/apps/opie-console/io_bt.h b/noncore/apps/opie-console/io_bt.h
index 5e9988c..239eefb 100644
--- a/noncore/apps/opie-console/io_bt.h
+++ b/noncore/apps/opie-console/io_bt.h
@@ -1,48 +1,51 @@
 #ifndef OPIE_IO_BT
 #define OPIE_IO_BT
 
 #include <opie/oprocess.h>
 #include "io_serial.h"
 
 /* Default values to be used if the profile information is incomplete */
 #define BT_DEFAULT_DEVICE       "/dev/ttyU0"
 #define BT_DEFAULT_BAUD         9600
 #define BT_DEFAULT_PARITY       0
 #define BT_DEFAULT_DBITS        8
 #define BT_DEFAULT_SBITS        1
 #define BT_DEFAULT_FLOW         0
 #define BT_DEFAULT_MAC          0
 
 
 /* IOSerial implements a RS232 IO Layer */
 
 class IOBt : public IOSerial {
 
     Q_OBJECT
 
 public:
 
     IOBt(const Profile &);
     ~IOBt();
 
-    QString identifier() const;
-    QString name() const;
+    virtual QString identifier() const;
+    virtual QString name() const;
+    virtual QBitArray supports() const;
+    virtual bool isConnected();
 
 signals:
     void received(const QByteArray &);
     void error(int, const QString &);
 
 public slots:
-    bool open();
-    void close();
-    void reload(const Profile &);
+    virtual void send( const QByteArray& );
+    virtual bool open();
+    virtual void close();
+    virtual void reload(const Profile &);
 
 private:
     OProcess *m_attach;
     QString m_mac;
 private slots:
     void slotExited(OProcess* proc);
 
 };
 
 #endif /* OPIE_IO_IRDA */
diff --git a/noncore/apps/opie-console/io_irda.cpp b/noncore/apps/opie-console/io_irda.cpp
index b3b693f..e360fb4 100644
--- a/noncore/apps/opie-console/io_irda.cpp
+++ b/noncore/apps/opie-console/io_irda.cpp
@@ -34,32 +34,44 @@ bool IOIrda::open() {
         ret= IOSerial::open();
     } else {
     // emit error!!!
         qWarning("could not attach to device");
         delete m_attach;
 	m_attach = 0l;
     }
     return ret;
 }
 
 void IOIrda::reload( const Profile &config ) {
     m_device = config.readEntry("Device", IRDA_DEFAULT_DEVICE);
     m_baud = config.readNumEntry("Baud", IRDA_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", IRDA_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", IRDA_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", IRDA_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", IRDA_DEFAULT_FLOW);
 }
 
 
 QString IOIrda::identifier() const {
     return "irda";
 }
 
 QString IOIrda::name() const {
     return "Irda IO Layer";
 }
 
 void IOIrda::slotExited(OProcess* proc ){
     close();
     delete proc;
 }
+
+QBitArray IOIrda::supports()const {
+    return QBitArray( 3 );
+}
+
+bool IOIrda::isConnected() {
+    return false;
+}
+
+void IOIrda::send(const QByteArray &data) {
+    qDebug( "Please overload me..." );
+}
diff --git a/noncore/apps/opie-console/io_irda.h b/noncore/apps/opie-console/io_irda.h
index 3aee951..14b1ae3 100644
--- a/noncore/apps/opie-console/io_irda.h
+++ b/noncore/apps/opie-console/io_irda.h
@@ -1,46 +1,49 @@
 #ifndef OPIE_IO_IRDA
 #define OPIE_IO_IRDA
 
 #include <opie/oprocess.h>
 #include "io_serial.h"
 
 /* Default values to be used if the profile information is incomplete */
 #define IRDA_DEFAULT_DEVICE       "/dev/ircomm0"
 #define IRDA_DEFAULT_BAUD         9600
 #define IRDA_DEFAULT_PARITY       0
 #define IRDA_DEFAULT_DBITS        8
 #define IRDA_DEFAULT_SBITS        1
 #define IRDA_DEFAULT_FLOW         0
 
 /* IOSerial implements a RS232 IO Layer */
 
 class IOIrda : public IOSerial {
 
     Q_OBJECT
 
 public:
 
     IOIrda(const Profile &);
     ~IOIrda();
 
-    QString identifier() const;
-    QString name() const;
+    virtual QString identifier() const;
+    virtual QString name() const;
+    virtual QBitArray supports() const;
+    virtual bool isConnected();
 
 signals:
     void received(const QByteArray &);
     void error(int, const QString &);
 
 public slots:
-    bool open();
-    void close();
-    void reload(const Profile &);
+    virtual void send( const QByteArray& );
+    virtual bool open();
+    virtual void close();
+    virtual void reload(const Profile &);
 
 private:
     OProcess *m_attach;
 
 private slots:
     void slotExited(OProcess* proc);
 
 };
 
 #endif /* OPIE_IO_IRDA */
diff --git a/noncore/apps/opie-console/io_layer.cpp b/noncore/apps/opie-console/io_layer.cpp
index 975ee60..52ec828 100644
--- a/noncore/apps/opie-console/io_layer.cpp
+++ b/noncore/apps/opie-console/io_layer.cpp
@@ -1,22 +1,23 @@
 #include "io_layer.h"
 
 IOLayer::IOLayer()
     : QObject()
 {
 }
 
 IOLayer::IOLayer(const Profile &)
     : QObject()
 {
 }
 
 IOLayer::~IOLayer() {
 }
 int IOLayer::rawIO()const{
     return -1;
 }
 void IOLayer::closeRawIO(int) {
 
 }
 void IOLayer::setSize(int, int ) {
 }
+
diff --git a/noncore/apps/opie-console/io_layer.h b/noncore/apps/opie-console/io_layer.h
index ed4478b..4f9bbe4 100644
--- a/noncore/apps/opie-console/io_layer.h
+++ b/noncore/apps/opie-console/io_layer.h
diff --git a/noncore/apps/opie-console/io_modem.cpp b/noncore/apps/opie-console/io_modem.cpp
index 896c24f..1ce680a 100644
--- a/noncore/apps/opie-console/io_modem.cpp
+++ b/noncore/apps/opie-console/io_modem.cpp
@@ -64,32 +64,43 @@ void IOModem::reload( const Profile &config ) {
     m_dialSuf1 = config.readEntry("DialSuffix1", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_dialPref2 = config.readEntry("DialPrefix2", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf2 = config.readEntry("DialSuffix2", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_dialPref3 = config.readEntry("DialPrefix3", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf3 = config.readEntry("DialSuffix3", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_connect = config.readEntry("DefaultConnect" MODEM_DEFAULT_CONNECT_STRING );
     m_hangup = config.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING );
     m_cancel = config.readEntry("CancelString", MODEM_DEFAULT_CANCEL_STRING );
     m_dialTime = config.readNumEntry("DialTime", MODEM_DEFAULT_DIAL_TIME );
     m_delayRedial = config.readNumEntry("DelayRedial", MODEM_DEFAULT_DELAY_REDIAL );
     m_numberTries = config.readNumEntry("NumberTries", MODEM_DEFAULT_NUMBER_TRIES );
     m_dtrDropTime = config.readNumEntry("DTRDRopTime", MODEM_DEFAULT_DTR_DROP_TIME );
     m_bpsDetect = config.readBoolEntry("BPSDetect", MODEM_DEFAULT_BPS_DETECT );
     m_dcdLines = config.readBoolEntry("DCDLines", MODEM_DEFAULT_DCD_LINES );
     m_multiLineUntag = config.readBoolEntry("MultiLineUntag", MODEM_DEFAULT_MULTI_LINE_UNTAG );
 }
 
 
 QString IOModem::identifier() const {
     return "modem";
 }
 
 QString IOModem::name() const {
     return "Modem IO Layer";
 }
 
 void IOModem::slotExited(OProcess* proc ){
     close();
     /* delete it afterwards */
     delete proc;
 }
 
+QBitArray IOModem::supports()const {
+    return QBitArray( 3 );
+}
+
+bool IOModem::isConnected() {
+    return false;
+}
+
+void IOModem::send(const QByteArray &data) {
+    qDebug( "Please overload me..." );
+}
diff --git a/noncore/apps/opie-console/io_modem.h b/noncore/apps/opie-console/io_modem.h
index 17228bd..2a926df 100644
--- a/noncore/apps/opie-console/io_modem.h
+++ b/noncore/apps/opie-console/io_modem.h
@@ -14,58 +14,61 @@
 #define MODEM_DEFAULT_FLOW         0
 
 #define MODEM_DEFAULT_INIT_STRING  "AT"
 #define MODEM_DEFAULT_RESET_STRING "ATZ~"
 #define MODEM_DEFAULT_DIAL_PREFIX1 "ATDT"
 #define MODEM_DEFAULT_DIAL_SUFFIX1 ""
 #define MODEM_DEFAULT_DIAL_PREFIX2 ""
 #define MODEM_DEFAULT_DIAL_SUFFIX2 ""
 #define MODEM_DEFAULT_DIAL_PREFIX3 ""
 #define MODEM_DEFAULT_DIAL_SUFFIX3 ""
 #define MODEM_DEFAULT_CONNECT_STRING "CONNECT"
 #define MODEM_DEFAULT_HANGUP_STRING "+++ATH"
 #define MODEM_DEFAULT_CANCEL_STRING ""
 #define MODEM_DEFAULT_DIAL_TIME     45
 #define MODEM_DEFAULT_DELAY_REDIAL  2
 #define MODEM_DEFAULT_NUMBER_TRIES  10
 #define MODEM_DEFAULT_DTR_DROP_TIME 1
 #define MODEM_DEFAULT_BPS_DETECT    0   // bool
 #define MODEM_DEFAULT_DCD_LINES     1   //bool
 #define MODEM_DEFAULT_MULTI_LINE_UNTAG 0 // bool
 
 /* IOSerial implements a RS232 IO Layer */
 
 class IOModem : public IOSerial {
 
     Q_OBJECT
 
 public:
 
     IOModem(const Profile &);
     ~IOModem();
 
-    QString identifier() const;
-    QString name() const;
+    virtual QString identifier() const;
+    virtual QString name() const;
+    virtual QBitArray supports() const;
+    virtual bool isConnected();
 
 signals:
     void received(const QByteArray &);
     void error(int, const QString &);
 
 public slots:
-    bool open();
-    void close();
-    void reload(const Profile &);
+    virtual void send( const QByteArray& );
+    virtual bool open();
+    virtual void close();
+    virtual void reload(const Profile &);
 
 private:
 
     QString m_initString, m_resetString, m_dialPref1, m_dialSuf1, m_dialPref2,
         m_dialSuf2, m_dialPref3, m_dialSuf3, m_connect, m_hangup, m_cancel;
     int  m_dialTime, m_delayRedial, m_numberTries, m_dtrDropTime,
         m_bpsDetect, m_dcdLines, m_multiLineUntag;
 	Profile m_profile;
 
 private slots:
     void slotExited(OProcess* proc);
 
 };
 
 #endif
diff --git a/noncore/apps/opie-console/io_serial.h b/noncore/apps/opie-console/io_serial.h
index edceac6..20c1ae1 100644
--- a/noncore/apps/opie-console/io_serial.h
+++ b/noncore/apps/opie-console/io_serial.h
@@ -4,69 +4,70 @@
 #include <qsocketnotifier.h>
 #include "io_layer.h"
 
 /* Default values to be used if the profile information is incomplete */
 #define SERIAL_DEFAULT_DEVICE       "/dev/ttyS0"
 #define SERIAL_DEFAULT_BAUD         9600
 #define SERIAL_DEFAULT_PARITY       0
 #define SERIAL_DEFAULT_DBITS        8
 #define SERIAL_DEFAULT_SBITS        1
 #define SERIAL_DEFAULT_FLOW         0
 
 /* IOSerial implements a RS232 IO Layer */
 
 class IOSerial : public IOLayer {
     Q_OBJECT
 public:
     enum Parity {
         ParityNone = 0,
         ParityEven,
         ParityOdd,
         ParitySpace,
         ParityMark
     };
 
     enum Flow {
         FlowHW = 0x01,
         FlowSW = 0x02
     };
 
     IOSerial(const Profile &);
     ~IOSerial();
 
-    QString identifier() const;
-    QString name() const;
+    virtual QString identifier() const;
+    virtual QString name() const;
     int rawIO()const;
     void closeRawIO(int fd );
-    QBitArray supports()const;
-    bool isConnected();
+    virtual QBitArray supports() const;
+    virtual bool isConnected();
+    
 /*signals:
     void received(const QByteArray &);
     void error(int, const QString &);
 */
 public slots:
-    void send(const QByteArray &);
-    bool open();
-    void close();
-    void reload(const Profile &);
+    virtual void send(const QByteArray &);
+    virtual bool open();
+    virtual void close();
+    virtual void reload(const Profile &);
 protected:
     int baud(int baud) const;
     void internDetach();
     void internAttach();
 protected slots:
     void dataArrived();
     void errorOccured();
 protected:
     QSocketNotifier *m_read;
     QSocketNotifier *m_error;
     QString          m_device;
     int              m_baud;
     int              m_parity;
     int              m_dbits;
     int              m_sbits;
     int              m_flow;
     int              m_fd;
     bool             m_connected;
 
 };
 
 #endif /* OPIE_IO_SERIAL */
diff --git a/noncore/apps/opie-console/opie-console.pro b/noncore/apps/opie-console/opie-console.pro
index 1bb9f35..5ffa46f 100644
--- a/noncore/apps/opie-console/opie-console.pro
+++ b/noncore/apps/opie-console/opie-console.pro
@@ -1,77 +1,77 @@
 TEMPLATE     = app
-TMAKE_CXXFLAGS	=-DHAVE_OPENPTY
-CONFIG       = qt warn_on release
+TMAKE_CXXFLAGS	+= -DHAVE_OPENPTY
+CONFIG       += qt warn_on release
 #CONFIG 	     = qt debug
 DESTDIR      = $(OPIEDIR)/bin
 HEADERS      = io_layer.h io_serial.h io_irda.h io_bt.h io_modem.h \
 	       file_layer.h filetransfer.h \
 	       metafactory.h \
 	       session.h \
 	       mainwindow.h \
 	       profile.h \
 	       profileconfig.h \
 	       profilemanager.h  \
 	       configwidget.h \
 	       tabwidget.h \
 	       configdialog.h \
 	       keytrans.h \
 	       transferdialog.h \
 	       profiledialogwidget.h \
 	       profileeditordialog.h \
 	       default.h \
 	       iolayerbase.h \
 	       serialconfigwidget.h irdaconfigwidget.h \
 	       btconfigwidget.h modemconfigwidget.h \
 	       atconfigdialog.h dialdialog.h \  
                procctl.h \
                function_keyboard.h  \
 	       receive_layer.h filereceive.h \
 	       script.h \
 	       dialer.h \
 	       terminalwidget.h \
 	       emulation_handler.h TECommon.h \
-	       TEHistroy.h TEScreen.h TEWidget.h \
+	       TEHistory.h TEScreen.h TEWidget.h \
 	       TEmuVt102.h TEmulation.h MyPty.h \
            consoleconfigwidget.h
 
 SOURCES      = io_layer.cpp io_serial.cpp io_irda.cpp io_bt.cpp io_modem.cpp \
 	       file_layer.cpp filetransfer.cpp \
                main.cpp \
 	       metafactory.cpp \
 	       session.cpp \
 	       mainwindow.cpp \
 	       profile.cpp \
 	       profileconfig.cpp \
 	       profilemanager.cpp  \
 	       tabwidget.cpp \
 	       configdialog.cpp \
 	       keytrans.cpp \
 	       transferdialog.cpp \
 	       profiledialogwidget.cpp \
 	       profileeditordialog.cpp \
 	       iolayerbase.cpp \
 	       serialconfigwidget.cpp irdaconfigwidget.cpp \
 	       btconfigwidget.cpp modemconfigwidget.cpp \ 
 	       atconfigdialog.cpp dialdialog.cpp \
 	       default.cpp  procctl.cpp \
                function_keyboard.cpp  \
 	       receive_layer.cpp filereceive.cpp \
 	       script.cpp \
 		   dialer.cpp \
 	       terminalwidget.cpp \
 		emulation_handler.cpp TEHistory.cpp \
 		TEScreen.cpp TEWidget.cpp \
 		TEmuVt102.cpp TEmulation.cpp MyPty.cpp \
         consoleconfigwidget.cpp
 		
 
 INTERFACES   = configurebase.ui editbase.ui
 INCLUDEPATH += $(OPIEDIR)/include
 DEPENDPATH  += $(OPIEDIR)/include
-LIBS        += -lqpe -lopie 
+LIBS        += -lqpe -lopie -lutil
 TARGET       = opie-console
 
 
 
 
 include ( ../../../include.pro )