Remove the Sharp battery % read hack, not necessary in recent OZ, and supporting the stock Sharp ROM in our libqpe isnt important.

1 files changed, 2 insertions, 59 deletions

diff --git a/library/power.cpp b/library/power.cpp
index ec5b309..21c8960 100644
--- a/library/power.cpp
+++ b/library/power.cpp
@@ -91,138 +91,81 @@ bool PowerStatusManager::getProcApmStatus( int &ac, int &bs, int &bf, int &pc, i
 		break;
 	    case 0x01:
 		ps->bs = PowerStatus::Low;
 		break;
 	    case 0x7f:
 		ps->bs = PowerStatus::VeryLow;
 		break;
 	    case 0x02:
 		ps->bs = PowerStatus::Critical;
 		break;
 	    case 0x03:
 		ps->bs = PowerStatus::Charging;
 		break;
 	    case 0x04:
 	    case 0xff: // 0xff is Unknown but we map to NotPresent
 	    default:
 		ps->bs = PowerStatus::NotPresent;
 		break;
 	}
 
 	switch ( ac ) {
 	    case 0x00:
 		ps->ac = PowerStatus::Offline;
 		break;
 	    case 0x01:
 		ps->ac = PowerStatus::Online;
 		break;
 	    case 0x02:
 		ps->ac = PowerStatus::Backup;
 		break;
 	}
 
-	if ( pc > 100 )
-	    pc = -1;
+	if ( pc > 100 ) pc = 100;
+	if ( pc < 0 ) pc = 0;
 
 	ps->percentRemain = pc;
 	ps->secsRemain = sec;
 
 	ok = true;
     }
 
     return ok;
 }
 
-#ifdef QT_QWS_SHARP
-
-void PowerStatusManager::getStatus()
-{
-    int ac, bs, bf, pc, sec;
-    ps->percentAccurate = TRUE; // not for long...
-
-    if ( haveProcApm && getProcApmStatus( ac, bs, bf, pc, sec ) ) {
-	// special case
-	if ( bs == 0x7f )
-	    ps->bs = PowerStatus::VeryLow;
-	pc = -1; // fake percentage
-	if ( pc < 0 ) {
-	    switch ( bs ) {
-		case 0x00: ps->percentRemain = 100; break; // High
-		case 0x01: ps->percentRemain = 30; break; // Low
-		case 0x7f: ps->percentRemain = 10; break; // Very Low
-		case 0x02: ps->percentRemain = 5; break; // Critical
-		case 0x03: ps->percentRemain = -1; break; // Charging
-	    }
-	    ps->percentAccurate = FALSE;
-	}
-    }
-
-    char *device = "/dev/apm_bios";
-    int fd = ::open (device, O_WRONLY);
-    if ( fd >= 0 ) {
-	int bbat_status = ioctl( fd, APM_IOC_BATTERY_BACK_CHK, 0 );
-	switch ( bbat_status ) {
-	    case 0x00:
-		ps->bbs = PowerStatus::High;
-		break;
-	    case 0x01:
-		ps->bbs = PowerStatus::Low;
-		break;
-	    case 0x7f:
-		ps->bbs = PowerStatus::VeryLow;
-		break;
-	    case 0x02:
-		ps->bbs = PowerStatus::Critical;
-		break;
-	    case 0x03:
-		ps->bbs = PowerStatus::Charging;
-		break;
-	    case 0x04:
-		ps->bbs = PowerStatus::NotPresent;
-		break;
-	}
-	::close(fd);
-    }
-}
-
-#else
-
 void PowerStatusManager::getStatus()
 {
     bool usedApm = FALSE;
 
     ps->percentAccurate = TRUE;
 
     // Some iPAQ kernel builds don't have APM. If this is not the case we
     // save ourselves an ioctl by testing if /proc/apm exists in the
     // constructor and we use /proc/apm instead
     int ac, bs, bf, pc, sec;
     if ( haveProcApm )
 	usedApm = getProcApmStatus( ac, bs, bf, pc, sec );
 
     if ( !usedApm ) {
 #ifdef QT_QWS_IPAQ_NO_APM
 	int fd;
 	int err;
 	struct bat_dev batt_info;
 
 	memset(&batt_info, 0, sizeof(batt_info));
 
 	fd = ::open("/dev/ts",O_RDONLY);
 	if( fd < 0 )
 	    return;
 
 	ioctl(fd, GET_BATTERY_STATUS, &batt_info);
 	ac_status = batt_info.ac_status;
 	ps->percentRemain = ( 425 * batt_info.batt1_voltage ) / 1000 - 298; // from h3600_ts.c
 	ps->secsRemain = -1; // seconds is bogus on iPAQ
 	::close (fd);
 #else
 	ps->percentRemain = 100;
 	ps->secsRemain = -1;
 	ps->percentAccurate = FALSE;
 #endif
     }
 }
-
-#endif
-