Caption Fix

9 files changed, 53 insertions, 15 deletions

diff --git a/noncore/net/networksetup/TODO b/noncore/net/networksetup/TODO
index 93cbab7..6457836 100644
--- a/noncore/net/networksetup/TODO
+++ b/noncore/net/networksetup/TODO
@@ -1,52 +1,68 @@
+Types:
+-Ethernet Connection (Done)
+-ISDN Connection
+-Modem COnnection (Started)
+-xDSL connection
+-Token Ring Connection
+-CIPE (VPN) connection (ipsec?)
+-Wireless Connection (Done)
+-Bluetooth
+-IPChains?
+
 test WEP
-WEP key in file wireless.conf is not encrypted !, therefore it is very easy to get the key out of the zaurus..
-WEP transimtion rat
+Add WEP transimtion rate
 1 or 2
 5.5
 1
 Auto
 
 udchcp needs to output the dhcp information so interfaces can read it
 
 interfacesetupimp really doesn't need a interface* pointer
 
-Possible other modules to write: ppp, ipsec, bluetooth, ipchains
-
 PPP module needs to scan pppd.tdb to see what is currently active
 
-WLAN - add possiblity to input text or hex without knowing "s:"
+WLAN
+- add possiblity to input text or hex without knowing "s:"
+- Handle "any" and any the same way in config
 
 Interface setupimp needs to use kernel calls.
 
+Add a route/DNS editor under the ViewAdvancedInfo button
+
+Use a true TCP/IP widget
+
+Make it so that pcmcia doesn't need to be stopped/started for wlan
+
 Automaticly update the main list of interfaces:
 > That would be me. :-D  netlink, can you point me in the right
 > direction where  I can get more info on it?  (I figured there was some
 > kenel call) 
 
 You can look up the meaning of the packets you receive, or you can just go 
 poll for changes you might be interested in each time you receive _any_ 
 packet. Anything's better than periodic polling.
 
 Note that you can't do this as non-root on some kernels. There's a patch 
 which can go into the hh.org kernel if it's not already there. 
 cf. http://marc.theaimsgroup.com/?l=linux-kernel&m=103520821605353&w=2
 
 
 #include <asm/types.h>
 #include <sys/socket.h>
 #include <linux/netlink.h>
 #include <linux/rtnetlink.h>
 
 int main(int argc, char **argv)
 {
         int fd;
         unsigned char buf[4096];
         int ret;
         int i, j;
         struct sockaddr_nl snl;
 
         fd = socket(AF_NETLINK, SOCK_DGRAM, NETLINK_ROUTE);
         if (fd < 0) {
                 perror("socket");
                 exit(1);
         }
diff --git a/noncore/net/networksetup/mainwindow.ui b/noncore/net/networksetup/mainwindow.ui
index 3d30994..dcabc52 100644
--- a/noncore/net/networksetup/mainwindow.ui
+++ b/noncore/net/networksetup/mainwindow.ui
@@ -1,52 +1,52 @@
 <!DOCTYPE UI><UI>
 <class>MainWindow</class>
 <widget>
     <class>QWidget</class>
     <property stdset="1">
         <name>name</name>
         <cstring>MainWindow</cstring>
     </property>
     <property stdset="1">
         <name>geometry</name>
         <rect>
             <x>0</x>
             <y>0</y>
             <width>240</width>
             <height>289</height>
         </rect>
     </property>
     <property stdset="1">
         <name>caption</name>
-        <string>Network Setup</string>
+        <string>Network Settings</string>
     </property>
     <vbox>
         <property stdset="1">
             <name>margin</name>
             <number>0</number>
         </property>
         <property stdset="1">
             <name>spacing</name>
             <number>6</number>
         </property>
         <widget>
             <class>QTabWidget</class>
             <property stdset="1">
                 <name>name</name>
                 <cstring>tabWidget</cstring>
             </property>
             <property>
                 <name>layoutMargin</name>
             </property>
             <widget>
                 <class>QWidget</class>
                 <property stdset="1">
                     <name>name</name>
                     <cstring>Widget3</cstring>
                 </property>
                 <attribute>
                     <name>title</name>
                     <string>Connections</string>
                 </attribute>
                 <vbox>
                     <property stdset="1">
                         <name>margin</name>
diff --git a/noncore/net/networksetup/opie-networksetup.control b/noncore/net/networksetup/opie-networksetup.control
index 3d6a32c..585e50e 100644
--- a/noncore/net/networksetup/opie-networksetup.control
+++ b/noncore/net/networksetup/opie-networksetup.control
@@ -1,8 +1,8 @@
 Files: bin/networksetup apps/Settings/networksetup.desktop plugins/networksetup/* pics/networksetup/* pics/Network/PPPConnect.png $QTDIR/lib/libinterfaces.so.1.0.0 $QTDIR/lib/libinterfaces.so.1.0 $QTDIR/lib/libinterfaces.so.1 root/usr/bin/changedns bin/getprofile
 Priority: optional
 Section: opie/settings
 Maintainer: Ben Meyer <meyerb@sharpsec.com> 
 Architecture: arm
 Version: $QPE_VERSION-$SUB_VERSION
 Depends: opie-base ($QPE_VERSION)
-Description: Opie network setup tool
+Description: Network settings
diff --git a/noncore/net/networksetup/wlan/wlanimp.cpp b/noncore/net/networksetup/wlan/wlanimp.cpp
index 648932f..1782c22 100644
--- a/noncore/net/networksetup/wlan/wlanimp.cpp
+++ b/noncore/net/networksetup/wlan/wlanimp.cpp
@@ -202,43 +202,46 @@ void WLANImp::changeAndSaveSettingFile(){
 }
 
 /**
  * Check to see if the current config is valid
  * Save wireless.opts, save interfaces
  */
 void WLANImp::accept(){
   if(wepEnabled->isChecked()){
     if(keyLineEdit0->text().isEmpty() && keyLineEdit1->text().isEmpty() && keyLineEdit2->text().isEmpty() && keyLineEdit3->text().isEmpty() ){
       QMessageBox::information(this, "Error", "Please enter a key for WEP.", QMessageBox::Ok);
       return;
     }
   }	
   
   if(essAny->isChecked() && essSpecificLineEdit->text().isEmpty()){
     QMessageBox::information(this, "Error", "Please enter a ESS-ID.", QMessageBox::Ok);
     return;
   }
   
   // Ok settings are good here, save
   changeAndSaveSettingFile();
   
   // Try to save the interfaces settings.
   if(!interfaceSetup->saveChanges())
     return;
 
   // Restart the device now that the settings have changed
   QString initpath;
   if( QDir("/etc/rc.d/init.d").exists() )
     initpath = "/etc/rc.d/init.d";
   else if( QDir("/etc/init.d").exists() )
     initpath = "/etc/init.d";
+
+  // It would be kinda cool if we didn't have to do this and could just to ifup/down
+  
   if( initpath )
     system(QString("%1/pcmcia stop").arg(initpath));
   if( initpath )
     system(QString("%1/pcmcia start").arg(initpath));
 
   // Close out the dialog
   QDialog::accept();
 }
 
 // wlanimp.cpp
 
diff --git a/noncore/settings/networksettings/TODO b/noncore/settings/networksettings/TODO
index 93cbab7..6457836 100644
--- a/noncore/settings/networksettings/TODO
+++ b/noncore/settings/networksettings/TODO
@@ -1,52 +1,68 @@
+Types:
+-Ethernet Connection (Done)
+-ISDN Connection
+-Modem COnnection (Started)
+-xDSL connection
+-Token Ring Connection
+-CIPE (VPN) connection (ipsec?)
+-Wireless Connection (Done)
+-Bluetooth
+-IPChains?
+
 test WEP
-WEP key in file wireless.conf is not encrypted !, therefore it is very easy to get the key out of the zaurus..
-WEP transimtion rat
+Add WEP transimtion rate
 1 or 2
 5.5
 1
 Auto
 
 udchcp needs to output the dhcp information so interfaces can read it
 
 interfacesetupimp really doesn't need a interface* pointer
 
-Possible other modules to write: ppp, ipsec, bluetooth, ipchains
-
 PPP module needs to scan pppd.tdb to see what is currently active
 
-WLAN - add possiblity to input text or hex without knowing "s:"
+WLAN
+- add possiblity to input text or hex without knowing "s:"
+- Handle "any" and any the same way in config
 
 Interface setupimp needs to use kernel calls.
 
+Add a route/DNS editor under the ViewAdvancedInfo button
+
+Use a true TCP/IP widget
+
+Make it so that pcmcia doesn't need to be stopped/started for wlan
+
 Automaticly update the main list of interfaces:
 > That would be me. :-D  netlink, can you point me in the right
 > direction where  I can get more info on it?  (I figured there was some
 > kenel call) 
 
 You can look up the meaning of the packets you receive, or you can just go 
 poll for changes you might be interested in each time you receive _any_ 
 packet. Anything's better than periodic polling.
 
 Note that you can't do this as non-root on some kernels. There's a patch 
 which can go into the hh.org kernel if it's not already there. 
 cf. http://marc.theaimsgroup.com/?l=linux-kernel&m=103520821605353&w=2
 
 
 #include <asm/types.h>
 #include <sys/socket.h>
 #include <linux/netlink.h>
 #include <linux/rtnetlink.h>
 
 int main(int argc, char **argv)
 {
         int fd;
         unsigned char buf[4096];
         int ret;
         int i, j;
         struct sockaddr_nl snl;
 
         fd = socket(AF_NETLINK, SOCK_DGRAM, NETLINK_ROUTE);
         if (fd < 0) {
                 perror("socket");
                 exit(1);
         }
diff --git a/noncore/settings/networksettings/mainwindow.ui b/noncore/settings/networksettings/mainwindow.ui
index 3d30994..dcabc52 100644
--- a/noncore/settings/networksettings/mainwindow.ui
+++ b/noncore/settings/networksettings/mainwindow.ui
@@ -1,52 +1,52 @@
 <!DOCTYPE UI><UI>
 <class>MainWindow</class>
 <widget>
     <class>QWidget</class>
     <property stdset="1">
         <name>name</name>
         <cstring>MainWindow</cstring>
     </property>
     <property stdset="1">
         <name>geometry</name>
         <rect>
             <x>0</x>
             <y>0</y>
             <width>240</width>
             <height>289</height>
         </rect>
     </property>
     <property stdset="1">
         <name>caption</name>
-        <string>Network Setup</string>
+        <string>Network Settings</string>
     </property>
     <vbox>
         <property stdset="1">
             <name>margin</name>
             <number>0</number>
         </property>
         <property stdset="1">
             <name>spacing</name>
             <number>6</number>
         </property>
         <widget>
             <class>QTabWidget</class>
             <property stdset="1">
                 <name>name</name>
                 <cstring>tabWidget</cstring>
             </property>
             <property>
                 <name>layoutMargin</name>
             </property>
             <widget>
                 <class>QWidget</class>
                 <property stdset="1">
                     <name>name</name>
                     <cstring>Widget3</cstring>
                 </property>
                 <attribute>
                     <name>title</name>
                     <string>Connections</string>
                 </attribute>
                 <vbox>
                     <property stdset="1">
                         <name>margin</name>
diff --git a/noncore/settings/networksettings/opie-networksettings.control b/noncore/settings/networksettings/opie-networksettings.control
index 3d6a32c..585e50e 100644
--- a/noncore/settings/networksettings/opie-networksettings.control
+++ b/noncore/settings/networksettings/opie-networksettings.control
@@ -1,8 +1,8 @@
 Files: bin/networksetup apps/Settings/networksetup.desktop plugins/networksetup/* pics/networksetup/* pics/Network/PPPConnect.png $QTDIR/lib/libinterfaces.so.1.0.0 $QTDIR/lib/libinterfaces.so.1.0 $QTDIR/lib/libinterfaces.so.1 root/usr/bin/changedns bin/getprofile
 Priority: optional
 Section: opie/settings
 Maintainer: Ben Meyer <meyerb@sharpsec.com> 
 Architecture: arm
 Version: $QPE_VERSION-$SUB_VERSION
 Depends: opie-base ($QPE_VERSION)
-Description: Opie network setup tool
+Description: Network settings
diff --git a/noncore/settings/networksettings/opie-networksetup.control b/noncore/settings/networksettings/opie-networksetup.control
index 3d6a32c..585e50e 100644
--- a/noncore/settings/networksettings/opie-networksetup.control
+++ b/noncore/settings/networksettings/opie-networksetup.control
@@ -1,8 +1,8 @@
 Files: bin/networksetup apps/Settings/networksetup.desktop plugins/networksetup/* pics/networksetup/* pics/Network/PPPConnect.png $QTDIR/lib/libinterfaces.so.1.0.0 $QTDIR/lib/libinterfaces.so.1.0 $QTDIR/lib/libinterfaces.so.1 root/usr/bin/changedns bin/getprofile
 Priority: optional
 Section: opie/settings
 Maintainer: Ben Meyer <meyerb@sharpsec.com> 
 Architecture: arm
 Version: $QPE_VERSION-$SUB_VERSION
 Depends: opie-base ($QPE_VERSION)
-Description: Opie network setup tool
+Description: Network settings
diff --git a/noncore/settings/networksettings/wlan/wlanimp.cpp b/noncore/settings/networksettings/wlan/wlanimp.cpp
index 648932f..1782c22 100644
--- a/noncore/settings/networksettings/wlan/wlanimp.cpp
+++ b/noncore/settings/networksettings/wlan/wlanimp.cpp
@@ -202,43 +202,46 @@ void WLANImp::changeAndSaveSettingFile(){
 }
 
 /**
  * Check to see if the current config is valid
  * Save wireless.opts, save interfaces
  */
 void WLANImp::accept(){
   if(wepEnabled->isChecked()){
     if(keyLineEdit0->text().isEmpty() && keyLineEdit1->text().isEmpty() && keyLineEdit2->text().isEmpty() && keyLineEdit3->text().isEmpty() ){
       QMessageBox::information(this, "Error", "Please enter a key for WEP.", QMessageBox::Ok);
       return;
     }
   }	
   
   if(essAny->isChecked() && essSpecificLineEdit->text().isEmpty()){
     QMessageBox::information(this, "Error", "Please enter a ESS-ID.", QMessageBox::Ok);
     return;
   }
   
   // Ok settings are good here, save
   changeAndSaveSettingFile();
   
   // Try to save the interfaces settings.
   if(!interfaceSetup->saveChanges())
     return;
 
   // Restart the device now that the settings have changed
   QString initpath;
   if( QDir("/etc/rc.d/init.d").exists() )
     initpath = "/etc/rc.d/init.d";
   else if( QDir("/etc/init.d").exists() )
     initpath = "/etc/init.d";
+
+  // It would be kinda cool if we didn't have to do this and could just to ifup/down
+  
   if( initpath )
     system(QString("%1/pcmcia stop").arg(initpath));
   if( initpath )
     system(QString("%1/pcmcia start").arg(initpath));
 
   // Close out the dialog
   QDialog::accept();
 }
 
 // wlanimp.cpp