fixed a lot of errors and sloppyness to make it compile again...

11 files changed, 75 insertions, 29 deletions

diff --git a/noncore/apps/opie-console/MyPty.cpp b/noncore/apps/opie-console/MyPty.cpp
index 23d4966..b2f6a74 100644
--- a/noncore/apps/opie-console/MyPty.cpp
+++ b/noncore/apps/opie-console/MyPty.cpp
@@ -1,368 +1,368 @@
 /* -------------------------------------------------------------------------- */
 /*                                                                            */
 /* [MyPty.C]               Pseudo Terminal Device                             */
 /*                                                                            */
 /* -------------------------------------------------------------------------- */
 /*                                                                            */
 /* Copyright (c) 1997,1998 by Lars Doelle <lars.doelle@on-line.de>            */
 /*                                                                            */
 /* This file is part of Konsole - an X terminal for KDE                       */
 /* -------------------------------------------------------------------------- */
 /*									      */
 /* Ported Konsole to Qt/Embedded                                              */
 /*									      */
 /* Copyright (C) 2000 by John Ryland <jryland@trolltech.com>                  */
 /*									      */
 /* -------------------------------------------------------------------------- */
 
 /* If you're compiling konsole on non-Linux platforms and find
    problems that you can track down to this file, please have
    a look into ../README.ports, too.
 */
 
 /*! \file
 */
 
 /*! \class TEPty
 
     \brief Ptys provide a pseudo terminal connection to a program.
 
     Although closely related to pipes, these pseudo terminal connections have
     some ability, that makes it nessesary to uses them. Most importent, they
     know about changing screen sizes and UNIX job control.
 
     Within the terminal emulation framework, this class represents the
     host side of the terminal together with the connecting serial line.
 
     One can create many instances of this class within a program.
     As a side effect of using this class, a signal(2) handler is
     installed on SIGCHLD.
 
     \par FIXME
 
     [NOTE: much of the technical stuff below will be replaced by forkpty.]
 
     publish the SIGCHLD signal if not related to an instance.
 
     clearify TEPty::done vs. TEPty::~TEPty semantics.
     check if pty is restartable via run after done.
 
     \par Pseudo terminals
 
     Pseudo terminals are a unique feature of UNIX, and always come in form of
     pairs of devices (/dev/ptyXX and /dev/ttyXX), which are connected to each
     other by the operating system. One may think of them as two serial devices
     linked by a null-modem cable. Being based on devices the number of
     simultanous instances of this class is (globally) limited by the number of
     those device pairs, which is 256.
 
     Another technic are UNIX 98 PTY's. These are supported also, and prefered
     over the (obsolete) predecessor.
 
     There's a sinister ioctl(2), signal(2) and job control stuff
     nessesary to make everything work as it should.
 */
 
 
 #include <qapplication.h>
 #include <qsocketnotifier.h>
 #include <qstring.h>
 #include <qfile.h>
 
 #include <stdlib.h>
 #include <stdio.h>
 #include <signal.h>
 #include <fcntl.h>
 #include <unistd.h>
 #include <termios.h>
 #include <sys/types.h>
 #include <sys/ioctl.h>
 #include <sys/wait.h>
 
 #ifdef HAVE_OPENPTY
 #include <pty.h>
 #endif
 
 #include "procctl.h"
 #include "MyPty.h"
 
 
 #undef VERBOSE_DEBUG
 
 
 /* -------------------------------------------------------------------------- */
 
 /*!
    Informs the client program about the
    actual size of the window.
 */
 
 void MyPty::setSize(int lines, int columns)
 {
     qWarning("setting size");
   struct winsize wsize;
   wsize.ws_row = (unsigned short)lines;
   wsize.ws_col = (unsigned short)columns;
   if(m_fd < 0) return;
   ioctl(m_fd,TIOCSWINSZ,(char *)&wsize);
 }
 
 
 void MyPty::donePty()
 {
     // This is code from the Qt DumbTerminal example
 
     ::close(m_fd);
 
     if (m_cpid) {
 	kill(m_cpid, SIGHUP);
 	//waitpid(m_cpid, &status, 0);
         delete m_sn_e;
         delete m_sn_r;
         m_sn_e = 0l;
         m_sn_r = 0l;
     }
 
     m_cpid = 0;
     m_fd = -1;
 //    emit done(status);
 }
 
 
 const char* MyPty::deviceName()
 {
     return m_ttynam;
 }
 
 
 void MyPty::error()
 {
     // This is code from the Qt DumbTerminal example
     donePty();
 }
 
 void MyPty::start() {
     QStrList lis;
     int r =run(m_cmd.latin1(), lis, 0, 0);
     r = r;
 }
 /*!
     start the client program.
 */
 int MyPty::run(const char* cmd, QStrList &, const char*, int)
 {
     // This is code from the Qt DumbTerminal example
     m_cpid = fork();
 
     if ( !m_cpid ) {
 	// child - exec shell on tty
 	for (int sig = 1; sig < NSIG; sig++) signal(sig,SIG_DFL);
 	int ttyfd = ::open(m_ttynam, O_RDWR);
 	dup2(ttyfd, STDIN_FILENO);
 	dup2(ttyfd, STDOUT_FILENO);
 	dup2(ttyfd, STDERR_FILENO);
 	// should be done with tty, so close it
 	::close(ttyfd);
 	static struct termios ttmode;
 	if ( setsid() < 0 )
 	    perror( "failed to set process group" );
 #if defined (TIOCSCTTY)
 	// grabbed from APUE by Stevens
 	ioctl(STDIN_FILENO, TIOCSCTTY, 0);
 #endif
 	tcgetattr( STDIN_FILENO, &ttmode );
 	ttmode.c_cc[VINTR] = 3;
 	ttmode.c_cc[VERASE] = 8;
 	tcsetattr( STDIN_FILENO, TCSANOW, &ttmode );
 	setenv("TERM",m_term,1);
 	setenv("COLORTERM","0",1);
     EnvironmentMap::Iterator it;
     for (it = m_env.begin(); it != m_env.end(); it++) {
         setenv(it.key().latin1(), it.data().latin1(), 1);
     }
 	if (getuid() == 0) {
 	    char msg[] = "WARNING: You are running this shell as root!\n";
 	    write(ttyfd, msg, sizeof(msg));
 	}
 	execl(cmd, cmd, 0);
 
 	donePty();
 	exit(-1);
     }
 
     // parent - continue as a widget
     delete m_sn_r;
     m_sn_r = new QSocketNotifier(m_fd,QSocketNotifier::Read,this);
     delete m_sn_e;
     m_sn_e = new QSocketNotifier(m_fd,QSocketNotifier::Exception,this);
     connect(m_sn_r,SIGNAL(activated(int)),this,SLOT(readPty()));
     connect(m_sn_e,SIGNAL(activated(int)),this,SLOT(error()));
 
     return 0;
 }
 
 int MyPty::openPty()
 {
     // This is code from the Qt DumbTerminal example
     int ptyfd = -1;
 
 #ifdef HAVE_OPENPTY
     int ttyfd;
-    if ( openpty(&ptyfd,&ttyfd,ttynam,0,0) )
+    if ( openpty(&ptyfd,&ttyfd,m_ttynam,0,0) )
 	ptyfd = -1;
     else
-	close(ttyfd); // we open the ttynam ourselves.
+	::close(ttyfd); // we open the ttynam ourselves.
 #else
     for (const char* c0 = "pqrstuvwxyzabcde"; ptyfd < 0 && *c0 != 0; c0++) {
 	for (const char* c1 = "0123456789abcdef"; ptyfd < 0 && *c1 != 0; c1++) {
 	    sprintf(m_ptynam,"/dev/pty%c%c",*c0,*c1);
 	    sprintf(m_ttynam,"/dev/tty%c%c",*c0,*c1);
 	    if ((ptyfd = ::open(m_ptynam,O_RDWR)) >= 0) {
 		if (geteuid() != 0 && !access(m_ttynam,R_OK|W_OK) == 0) {
 		    ::close(ptyfd);
 		    ptyfd = -1;
 		}
 	    }
 	}
     }
 #endif
 
     if ( ptyfd < 0 ) {
 //	qApp->exit(1);
 	return -1;
     }
 
     return ptyfd;
 }
 
 /*!
     Create an instance.
 */
 MyPty::MyPty(const Profile& prof) : m_cpid(0)
 {
 
     int term = prof.readNumEntry("Terminal", Profile::VT100 );
     switch( term ) {
     default:
     case Profile::VT100:
     case Profile::VT102:
         m_term = "vt100";
         break;
     case Profile::Linux:
         m_term = "linux";
         break;
     case Profile::XTerm:
         m_term = "xterm";
         break;
     }
     m_sn_e = 0l;
     m_sn_r = 0l;
   m_fd = openPty();
   ProcCtl* ctl = ProcCtl::self();
   Q_UNUSED(ctl);
   reload(prof);
 }
 
 /*!
     Destructor.
     Note that the related client program is not killed
     (yet) when a instance is deleted.
 */
 MyPty::~MyPty()
 {
     donePty();
 }
 QString MyPty::identifier()const {
     return QString::fromLatin1("term");
 }
 QString MyPty::name()const{
     return identifier();
 }
 bool MyPty::open() {
     if (m_fd < 0)
         m_fd = openPty();
 
     start();
     return true;
 }
 void MyPty::close() {
     donePty();
     m_fd = openPty();
 }
 void MyPty::reload( const Profile& prof) {
     m_env.clear();
     m_cmd = prof.readEntry("Command", "/bin/sh");
 
     /*
      * Lets check if m_cmd actually
      * exists....
      * we try to use bin/bash and if
      * this fails we
      * will fallback to /bin/sh
      * which should be there 100%
      */
     if ( m_cmd.stripWhiteSpace() == "/bin/bash" && !QFile::exists(QFile::encodeName(m_cmd) ) )        
             m_cmd = "/bin/sh";
         
 
     int envcount = prof.readNumEntry("EnvVars", 0);
     for (int i=0; i<envcount; i++) {
         QString name = prof.readEntry("Env_Name_" + QString::number(i), "");
         QString value = prof.readEntry("Env_Value_" + QString::number(i), "");
         if (!(name.isEmpty() || value.isEmpty())) {
             m_env.insert(name, value);
         }
     }
 }
 /*! sends len bytes through the line */
 void MyPty::send(const QByteArray& ar)
 {
 #ifdef VERBOSE_DEBUG
   // verbose debug
   printf("sending bytes:\n");
   for (uint i = 0; i < ar.count(); i++)
     printf("%c", ar[i]);
   printf("\n");
 #endif
 
   ::write(m_fd, ar.data(), ar.count());
 }
 
 /*! indicates that a block of data is received */
 void MyPty::readPty()
 {
   QByteArray buf(4096);
 
   int len = ::read( m_fd, buf.data(), 4096 );
 
   if (len == -1 || len == 0) {
      donePty();
      return;
   }
 
   if (len < 0)
      return;
 
 
   buf.resize(len);
   emit received(buf);
 
 #ifdef VERBOSE_DEBUG
   // verbose debug
   printf("read bytes:\n");
   for (uint i = 0; i < buf.count(); i++)
     printf("%c", buf[i]);
   printf("\n");
 #endif
 
 }
 QBitArray MyPty::supports()const {
     QBitArray ar(3);
     //autoconnect
     ar[0] = 1;
     //
     ar[1] = 0;
     ar[2] = 0;
 
     return ar;
 }
diff --git a/noncore/apps/opie-console/io_bt.cpp b/noncore/apps/opie-console/io_bt.cpp
index 8dd8151..37bf797 100644
--- a/noncore/apps/opie-console/io_bt.cpp
+++ b/noncore/apps/opie-console/io_bt.cpp
@@ -1,80 +1,92 @@
 
 #include "io_bt.h"
 
 IOBt::IOBt( const Profile &config ) : IOSerial( config ) {
     m_attach = 0;
 }
 
 
 IOBt::~IOBt() {
     if ( m_attach ) {
         delete m_attach;
     }
 }
 
 
 void IOBt::close() {
 
     IOSerial::close();
     // still need error handling
     if ( m_attach ) {
         delete m_attach;
         m_attach = 0;
     }
 }
 
 bool IOBt::open() {
     bool ret = false;
 
     // only set up bt stuff if mac address was set, otherwise use the device set
     if ( !m_mac.isEmpty() ) {
 
         // now it should also be checked, if there is a connection to the device with that mac allready
         // hciattach here
         m_attach = new OProcess();
         *m_attach << "hciattach /dev/ttyS2 any 57600";
 
         // then start hcid, then rcfomm handling (m_mac)
 
         connect( m_attach, SIGNAL( processExited( OProcess* ) ),
                  this, SLOT( slotExited( OProcess* ) ) );
 
         if ( m_attach->start() ) {
             ret = IOSerial::open();
         } else {
             qWarning("could not attach to device");
             delete m_attach;
             m_attach = 0;
         }
     } else {
         // directly to the normal serial
         // TODO: look first if the connection really exists. ( is set up )
 
         ret =IOSerial::open();
     }
     return ret;
 }
 
 void IOBt::reload( const Profile &config ) {
     m_device = config.readEntry("Device", BT_DEFAULT_DEVICE);
     m_mac = config.readEntry("Mac", BT_DEFAULT_MAC);
     m_baud = config.readNumEntry("Baud", BT_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", BT_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", BT_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", BT_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", BT_DEFAULT_FLOW);
 }
 
 
 QString IOBt::identifier() const {
     return "bluetooth";
 }
 
 QString IOBt::name() const {
     return "BLuetooth IO Layer";
 }
 
 void IOBt::slotExited( OProcess* proc ){
     close();
     delete proc;
 }
+
+QBitArray IOBt::supports() const {
+    return QBitArray( 3 );
+}
+
+bool IOBt::isConnected() {
+    return false;
+}
+
+void IOBt::send(const QByteArray &data) {
+    qDebug( "Please overload me..." );
+}
diff --git a/noncore/apps/opie-console/io_bt.h b/noncore/apps/opie-console/io_bt.h
index 5e9988c..239eefb 100644
--- a/noncore/apps/opie-console/io_bt.h
+++ b/noncore/apps/opie-console/io_bt.h
@@ -1,48 +1,51 @@
 #ifndef OPIE_IO_BT
 #define OPIE_IO_BT
 
 #include <opie/oprocess.h>
 #include "io_serial.h"
 
 /* Default values to be used if the profile information is incomplete */
 #define BT_DEFAULT_DEVICE       "/dev/ttyU0"
 #define BT_DEFAULT_BAUD         9600
 #define BT_DEFAULT_PARITY       0
 #define BT_DEFAULT_DBITS        8
 #define BT_DEFAULT_SBITS        1
 #define BT_DEFAULT_FLOW         0
 #define BT_DEFAULT_MAC          0
 
 
 /* IOSerial implements a RS232 IO Layer */
 
 class IOBt : public IOSerial {
 
     Q_OBJECT
 
 public:
 
     IOBt(const Profile &);
     ~IOBt();
 
-    QString identifier() const;
-    QString name() const;
+    virtual QString identifier() const;
+    virtual QString name() const;
+    virtual QBitArray supports() const;
+    virtual bool isConnected();
 
 signals:
     void received(const QByteArray &);
     void error(int, const QString &);
 
 public slots:
-    bool open();
-    void close();
-    void reload(const Profile &);
+    virtual void send( const QByteArray& );
+    virtual bool open();
+    virtual void close();
+    virtual void reload(const Profile &);
 
 private:
     OProcess *m_attach;
     QString m_mac;
 private slots:
     void slotExited(OProcess* proc);
 
 };
 
 #endif /* OPIE_IO_IRDA */
diff --git a/noncore/apps/opie-console/io_irda.cpp b/noncore/apps/opie-console/io_irda.cpp
index b3b693f..e360fb4 100644
--- a/noncore/apps/opie-console/io_irda.cpp
+++ b/noncore/apps/opie-console/io_irda.cpp
@@ -1,65 +1,77 @@
 
 #include "io_irda.h"
 
 IOIrda::IOIrda( const Profile &config ) : IOSerial( config ) {
     m_attach = 0;
 }
 
 
 IOIrda::~IOIrda() {
     if ( m_attach ) {
         delete m_attach;
     }
 }
 
 
 void IOIrda::close() {
 
     IOSerial::close();
     // still need error handling
     delete m_attach;
 }
 
 bool IOIrda::open() {
     bool ret;
 
     // irdaattach here
     m_attach = new OProcess();
     *m_attach << "irattach /dev/ttyS2 -s";
 
     connect( m_attach, SIGNAL( processExited( OProcess* ) ),
             this, SLOT( slotExited( OProcess* ) ) );
 
     if ( m_attach->start() ) {
         ret= IOSerial::open();
     } else {
     // emit error!!!
         qWarning("could not attach to device");
         delete m_attach;
 	m_attach = 0l;
     }
     return ret;
 }
 
 void IOIrda::reload( const Profile &config ) {
     m_device = config.readEntry("Device", IRDA_DEFAULT_DEVICE);
     m_baud = config.readNumEntry("Baud", IRDA_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", IRDA_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", IRDA_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", IRDA_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", IRDA_DEFAULT_FLOW);
 }
 
 
 QString IOIrda::identifier() const {
     return "irda";
 }
 
 QString IOIrda::name() const {
     return "Irda IO Layer";
 }
 
 void IOIrda::slotExited(OProcess* proc ){
     close();
     delete proc;
 }
+
+QBitArray IOIrda::supports()const {
+    return QBitArray( 3 );
+}
+
+bool IOIrda::isConnected() {
+    return false;
+}
+
+void IOIrda::send(const QByteArray &data) {
+    qDebug( "Please overload me..." );
+}
diff --git a/noncore/apps/opie-console/io_irda.h b/noncore/apps/opie-console/io_irda.h
index 3aee951..14b1ae3 100644
--- a/noncore/apps/opie-console/io_irda.h
+++ b/noncore/apps/opie-console/io_irda.h
@@ -1,46 +1,49 @@
 #ifndef OPIE_IO_IRDA
 #define OPIE_IO_IRDA
 
 #include <opie/oprocess.h>
 #include "io_serial.h"
 
 /* Default values to be used if the profile information is incomplete */
 #define IRDA_DEFAULT_DEVICE       "/dev/ircomm0"
 #define IRDA_DEFAULT_BAUD         9600
 #define IRDA_DEFAULT_PARITY       0
 #define IRDA_DEFAULT_DBITS        8
 #define IRDA_DEFAULT_SBITS        1
 #define IRDA_DEFAULT_FLOW         0
 
 /* IOSerial implements a RS232 IO Layer */
 
 class IOIrda : public IOSerial {
 
     Q_OBJECT
 
 public:
 
     IOIrda(const Profile &);
     ~IOIrda();
 
-    QString identifier() const;
-    QString name() const;
+    virtual QString identifier() const;
+    virtual QString name() const;
+    virtual QBitArray supports() const;
+    virtual bool isConnected();
 
 signals:
     void received(const QByteArray &);
     void error(int, const QString &);
 
 public slots:
-    bool open();
-    void close();
-    void reload(const Profile &);
+    virtual void send( const QByteArray& );
+    virtual bool open();
+    virtual void close();
+    virtual void reload(const Profile &);
 
 private:
     OProcess *m_attach;
 
 private slots:
     void slotExited(OProcess* proc);
 
 };
 
 #endif /* OPIE_IO_IRDA */
diff --git a/noncore/apps/opie-console/io_layer.cpp b/noncore/apps/opie-console/io_layer.cpp
index 975ee60..52ec828 100644
--- a/noncore/apps/opie-console/io_layer.cpp
+++ b/noncore/apps/opie-console/io_layer.cpp
@@ -1,22 +1,23 @@
 #include "io_layer.h"
 
 IOLayer::IOLayer()
     : QObject()
 {
 }
 
 IOLayer::IOLayer(const Profile &)
     : QObject()
 {
 }
 
 IOLayer::~IOLayer() {
 }
 int IOLayer::rawIO()const{
     return -1;
 }
 void IOLayer::closeRawIO(int) {
 
 }
 void IOLayer::setSize(int, int ) {
 }
+
diff --git a/noncore/apps/opie-console/io_layer.h b/noncore/apps/opie-console/io_layer.h
index ed4478b..4f9bbe4 100644
--- a/noncore/apps/opie-console/io_layer.h
+++ b/noncore/apps/opie-console/io_layer.h
diff --git a/noncore/apps/opie-console/io_modem.cpp b/noncore/apps/opie-console/io_modem.cpp
index 896c24f..1ce680a 100644
--- a/noncore/apps/opie-console/io_modem.cpp
+++ b/noncore/apps/opie-console/io_modem.cpp
@@ -1,95 +1,106 @@
 
 #include "io_modem.h"
 
 #include "dialer.h"
 
 IOModem::IOModem( const Profile &profile )
 	: IOSerial( profile ) {
 	m_profile = profile;
 }
 
 
 IOModem::~IOModem() {
 
 }
 
 
 void IOModem::close() {
 	// Hangup, discarding result
 //	int fd = rawIO();
         internDetach();
 	Dialer d(m_profile, m_fd);
 	d.setHangupOnly();
 	//d.exec();
         internAttach();
 //	closeRawIO(fd);
 
     IOSerial::close();
 }
 
 bool IOModem::open() {
     bool ret = IOSerial::open();
 	if(!ret) return false;
 
 //	int fd = rawIO();
         internDetach();
 	Dialer d(m_profile, m_fd);
 
 	int result = d.exec();
         internAttach();
 //	closeRawIO(fd);
 	if(result == QDialog::Accepted)
 	{
 		return true;
 	}
 	else
 	{
 		close();
 		return false;
 	}
 }
 
 void IOModem::reload( const Profile &config ) {
 
     m_device = config.readEntry("Device", MODEM_DEFAULT_DEVICE);
     m_baud = config.readNumEntry("Baud", MODEM_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", MODEM_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", MODEM_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", MODEM_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", MODEM_DEFAULT_FLOW);
 
     m_initString = config.readEntry("InitString", MODEM_DEFAULT_INIT_STRING );
     m_resetString = config.readEntry("ResetString", MODEM_DEFAULT_RESET_STRING );
     m_dialPref1 = config.readEntry("DialPrefix1", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf1 = config.readEntry("DialSuffix1", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_dialPref2 = config.readEntry("DialPrefix2", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf2 = config.readEntry("DialSuffix2", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_dialPref3 = config.readEntry("DialPrefix3", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf3 = config.readEntry("DialSuffix3", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_connect = config.readEntry("DefaultConnect" MODEM_DEFAULT_CONNECT_STRING );
     m_hangup = config.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING );
     m_cancel = config.readEntry("CancelString", MODEM_DEFAULT_CANCEL_STRING );
     m_dialTime = config.readNumEntry("DialTime", MODEM_DEFAULT_DIAL_TIME );
     m_delayRedial = config.readNumEntry("DelayRedial", MODEM_DEFAULT_DELAY_REDIAL );
     m_numberTries = config.readNumEntry("NumberTries", MODEM_DEFAULT_NUMBER_TRIES );
     m_dtrDropTime = config.readNumEntry("DTRDRopTime", MODEM_DEFAULT_DTR_DROP_TIME );
     m_bpsDetect = config.readBoolEntry("BPSDetect", MODEM_DEFAULT_BPS_DETECT );
     m_dcdLines = config.readBoolEntry("DCDLines", MODEM_DEFAULT_DCD_LINES );
     m_multiLineUntag = config.readBoolEntry("MultiLineUntag", MODEM_DEFAULT_MULTI_LINE_UNTAG );
 }
 
 
 QString IOModem::identifier() const {
     return "modem";
 }
 
 QString IOModem::name() const {
     return "Modem IO Layer";
 }
 
 void IOModem::slotExited(OProcess* proc ){
     close();
     /* delete it afterwards */
     delete proc;
 }
 
+QBitArray IOModem::supports()const {
+    return QBitArray( 3 );
+}
+
+bool IOModem::isConnected() {
+    return false;
+}
+
+void IOModem::send(const QByteArray &data) {
+    qDebug( "Please overload me..." );
+}
diff --git a/noncore/apps/opie-console/io_modem.h b/noncore/apps/opie-console/io_modem.h
index 17228bd..2a926df 100644
--- a/noncore/apps/opie-console/io_modem.h
+++ b/noncore/apps/opie-console/io_modem.h
@@ -1,71 +1,74 @@
 #ifndef OPIE_IO_MODEM
 #define OPIE_IO_MODEM
 
 #include <opie/oprocess.h>
 #include "io_serial.h"
 #include "profile.h"
 
 /* Default values to be used if the profile information is incomplete */
 #define MODEM_DEFAULT_DEVICE       "/dev/ttyS0"
 #define MODEM_DEFAULT_BAUD         9600
 #define MODEM_DEFAULT_PARITY       0
 #define MODEM_DEFAULT_DBITS        8
 #define MODEM_DEFAULT_SBITS        1
 #define MODEM_DEFAULT_FLOW         0
 
 #define MODEM_DEFAULT_INIT_STRING  "AT"
 #define MODEM_DEFAULT_RESET_STRING "ATZ~"
 #define MODEM_DEFAULT_DIAL_PREFIX1 "ATDT"
 #define MODEM_DEFAULT_DIAL_SUFFIX1 ""
 #define MODEM_DEFAULT_DIAL_PREFIX2 ""
 #define MODEM_DEFAULT_DIAL_SUFFIX2 ""
 #define MODEM_DEFAULT_DIAL_PREFIX3 ""
 #define MODEM_DEFAULT_DIAL_SUFFIX3 ""
 #define MODEM_DEFAULT_CONNECT_STRING "CONNECT"
 #define MODEM_DEFAULT_HANGUP_STRING "+++ATH"
 #define MODEM_DEFAULT_CANCEL_STRING ""
 #define MODEM_DEFAULT_DIAL_TIME     45
 #define MODEM_DEFAULT_DELAY_REDIAL  2
 #define MODEM_DEFAULT_NUMBER_TRIES  10
 #define MODEM_DEFAULT_DTR_DROP_TIME 1
 #define MODEM_DEFAULT_BPS_DETECT    0   // bool
 #define MODEM_DEFAULT_DCD_LINES     1   //bool
 #define MODEM_DEFAULT_MULTI_LINE_UNTAG 0 // bool
 
 /* IOSerial implements a RS232 IO Layer */
 
 class IOModem : public IOSerial {
 
     Q_OBJECT
 
 public:
 
     IOModem(const Profile &);
     ~IOModem();
 
-    QString identifier() const;
-    QString name() const;
+    virtual QString identifier() const;
+    virtual QString name() const;
+    virtual QBitArray supports() const;
+    virtual bool isConnected();
 
 signals:
     void received(const QByteArray &);
     void error(int, const QString &);
 
 public slots:
-    bool open();
-    void close();
-    void reload(const Profile &);
+    virtual void send( const QByteArray& );
+    virtual bool open();
+    virtual void close();
+    virtual void reload(const Profile &);
 
 private:
 
     QString m_initString, m_resetString, m_dialPref1, m_dialSuf1, m_dialPref2,
         m_dialSuf2, m_dialPref3, m_dialSuf3, m_connect, m_hangup, m_cancel;
     int  m_dialTime, m_delayRedial, m_numberTries, m_dtrDropTime,
         m_bpsDetect, m_dcdLines, m_multiLineUntag;
 	Profile m_profile;
 
 private slots:
     void slotExited(OProcess* proc);
 
 };
 
 #endif
diff --git a/noncore/apps/opie-console/io_serial.h b/noncore/apps/opie-console/io_serial.h
index edceac6..20c1ae1 100644
--- a/noncore/apps/opie-console/io_serial.h
+++ b/noncore/apps/opie-console/io_serial.h
@@ -1,72 +1,73 @@
 #ifndef OPIE_IO_SERIAL
 #define OPIE_IO_SERIAL
 
 #include <qsocketnotifier.h>
 #include "io_layer.h"
 
 /* Default values to be used if the profile information is incomplete */
 #define SERIAL_DEFAULT_DEVICE       "/dev/ttyS0"
 #define SERIAL_DEFAULT_BAUD         9600
 #define SERIAL_DEFAULT_PARITY       0
 #define SERIAL_DEFAULT_DBITS        8
 #define SERIAL_DEFAULT_SBITS        1
 #define SERIAL_DEFAULT_FLOW         0
 
 /* IOSerial implements a RS232 IO Layer */
 
 class IOSerial : public IOLayer {
     Q_OBJECT
 public:
     enum Parity {
         ParityNone = 0,
         ParityEven,
         ParityOdd,
         ParitySpace,
         ParityMark
     };
 
     enum Flow {
         FlowHW = 0x01,
         FlowSW = 0x02
     };
 
     IOSerial(const Profile &);
     ~IOSerial();
 
-    QString identifier() const;
-    QString name() const;
+    virtual QString identifier() const;
+    virtual QString name() const;
     int rawIO()const;
     void closeRawIO(int fd );
-    QBitArray supports()const;
-    bool isConnected();
+    virtual QBitArray supports() const;
+    virtual bool isConnected();
+    
 /*signals:
     void received(const QByteArray &);
     void error(int, const QString &);
 */
 public slots:
-    void send(const QByteArray &);
-    bool open();
-    void close();
-    void reload(const Profile &);
+    virtual void send(const QByteArray &);
+    virtual bool open();
+    virtual void close();
+    virtual void reload(const Profile &);
 protected:
     int baud(int baud) const;
     void internDetach();
     void internAttach();
 protected slots:
     void dataArrived();
     void errorOccured();
 protected:
     QSocketNotifier *m_read;
     QSocketNotifier *m_error;
     QString          m_device;
     int              m_baud;
     int              m_parity;
     int              m_dbits;
     int              m_sbits;
     int              m_flow;
     int              m_fd;
     bool             m_connected;
 
 };
 
 #endif /* OPIE_IO_SERIAL */
diff --git a/noncore/apps/opie-console/opie-console.pro b/noncore/apps/opie-console/opie-console.pro
index 1bb9f35..5ffa46f 100644
--- a/noncore/apps/opie-console/opie-console.pro
+++ b/noncore/apps/opie-console/opie-console.pro
@@ -1,77 +1,77 @@
 TEMPLATE     = app
-TMAKE_CXXFLAGS	=-DHAVE_OPENPTY
-CONFIG       = qt warn_on release
+TMAKE_CXXFLAGS	+= -DHAVE_OPENPTY
+CONFIG       += qt warn_on release
 #CONFIG 	     = qt debug
 DESTDIR      = $(OPIEDIR)/bin
 HEADERS      = io_layer.h io_serial.h io_irda.h io_bt.h io_modem.h \
 	       file_layer.h filetransfer.h \
 	       metafactory.h \
 	       session.h \
 	       mainwindow.h \
 	       profile.h \
 	       profileconfig.h \
 	       profilemanager.h  \
 	       configwidget.h \
 	       tabwidget.h \
 	       configdialog.h \
 	       keytrans.h \
 	       transferdialog.h \
 	       profiledialogwidget.h \
 	       profileeditordialog.h \
 	       default.h \
 	       iolayerbase.h \
 	       serialconfigwidget.h irdaconfigwidget.h \
 	       btconfigwidget.h modemconfigwidget.h \
 	       atconfigdialog.h dialdialog.h \  
                procctl.h \
                function_keyboard.h  \
 	       receive_layer.h filereceive.h \
 	       script.h \
 	       dialer.h \
 	       terminalwidget.h \
 	       emulation_handler.h TECommon.h \
-	       TEHistroy.h TEScreen.h TEWidget.h \
+	       TEHistory.h TEScreen.h TEWidget.h \
 	       TEmuVt102.h TEmulation.h MyPty.h \
            consoleconfigwidget.h
 
 SOURCES      = io_layer.cpp io_serial.cpp io_irda.cpp io_bt.cpp io_modem.cpp \
 	       file_layer.cpp filetransfer.cpp \
                main.cpp \
 	       metafactory.cpp \
 	       session.cpp \
 	       mainwindow.cpp \
 	       profile.cpp \
 	       profileconfig.cpp \
 	       profilemanager.cpp  \
 	       tabwidget.cpp \
 	       configdialog.cpp \
 	       keytrans.cpp \
 	       transferdialog.cpp \
 	       profiledialogwidget.cpp \
 	       profileeditordialog.cpp \
 	       iolayerbase.cpp \
 	       serialconfigwidget.cpp irdaconfigwidget.cpp \
 	       btconfigwidget.cpp modemconfigwidget.cpp \ 
 	       atconfigdialog.cpp dialdialog.cpp \
 	       default.cpp  procctl.cpp \
                function_keyboard.cpp  \
 	       receive_layer.cpp filereceive.cpp \
 	       script.cpp \
 		   dialer.cpp \
 	       terminalwidget.cpp \
 		emulation_handler.cpp TEHistory.cpp \
 		TEScreen.cpp TEWidget.cpp \
 		TEmuVt102.cpp TEmulation.cpp MyPty.cpp \
         consoleconfigwidget.cpp
 		
 
 INTERFACES   = configurebase.ui editbase.ui
 INCLUDEPATH += $(OPIEDIR)/include
 DEPENDPATH  += $(OPIEDIR)/include
-LIBS        += -lqpe -lopie 
+LIBS        += -lqpe -lopie -lutil
 TARGET       = opie-console
 
 
 
 
 include ( ../../../include.pro )