-SIMpad crashes on QObject::connect() of the QCopChannel

-Luckily (I'm a cheater) OApplication can emit the signal for us
-Event more lucky, qpe and every quicklaunchable application
 has a OApplication instance... so the signal is almost available
 everywhere
-do not call initButtons from reloadButtonMappings if d->m_buttons
 exists

1 files changed, 2 insertions, 2 deletions

diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp
index 67cae1c..e57cdef 100644
--- a/libopie2/opiecore/device/odevice.cpp
+++ b/libopie2/opiecore/device/odevice.cpp
@@ -263,597 +263,597 @@ bool ODevice::setSoftSuspend ( bool /*soft*/ )
 * do have asynchronus apm implementations.
 * This method will either fail and return false or it'll suspend the
 * device and return once the device got woken up
 *
 * @return if the device got suspended
 */
 bool ODevice::suspend()
 {
     if ( !isQWS( ) ) // only qwsserver is allowed to suspend
         return false;
 
     if ( d->m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
         return false;
 
     bool res = false;
     ODevice::sendSuspendmsg();
 
     struct timeval tvs, tvn;
     ::gettimeofday ( &tvs, 0 );
 
     ::sync(); // flush fs caches
     res = ( ::system ( "apm --suspend" ) == 0 );
 
     // This is needed because the iPAQ apm implementation is asynchronous and we
     // can not be sure when exactly the device is really suspended
     // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
     if ( res ) {
         do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
             ::usleep ( 200 * 1000 );
             ::gettimeofday ( &tvn, 0 );
         } while ((( tvn. tv_sec - tvs. tv_sec ) * 1000 + ( tvn. tv_usec - tvs. tv_usec ) / 1000 ) < 1500 );
     }
 
     return res;
 }
 
 //#include <linux/fb.h> better not rely on kernel headers in userspace ...
 
 #define FBIOBLANK             OD_IO( 'F', 0x11 ) // 0x4611
 
 /* VESA Blanking Levels */
 #define VESA_NO_BLANKING      0
 #define VESA_VSYNC_SUSPEND    1
 #define VESA_HSYNC_SUSPEND    2
 #define VESA_POWERDOWN        3
 
 /**
 * This sets the display on or off
 */
 bool ODevice::setDisplayStatus ( bool on )
 {
     qDebug("ODevice::setDisplayStatus(%d)", on);
 
     if ( d->m_model == Model_Unknown )
         return false;
 
     bool res = false;
     int fd;
 
 #ifdef QT_QWS_DEVFS
     if (( fd = ::open ( "/dev/fb/0", O_RDWR )) >= 0 ) {
 #else
     if (( fd = ::open ( "/dev/fb0", O_RDWR )) >= 0 ) {
 #endif
         res = ( ::ioctl ( fd, FBIOBLANK, on ? VESA_NO_BLANKING : VESA_POWERDOWN ) == 0 );
         ::close ( fd );
     }
     return res;
 }
 
 /**
 * This sets the display brightness
 *
 * @param b The brightness to be set on a scale from 0 to 255
 * @return success or failure
 */
 bool ODevice::setDisplayBrightness ( int b)
 {
         Q_UNUSED( b )
     return false;
 }
 
 /**
  * 
  * @return Returns the number of steppings on the brightness slider
  * in the Light-'n-Power settings. Values smaller zero and bigger
  * than 255 do not make sense.
  *
  * \sa QSlider::setLineStep
  * \sa QSlider::setPageStep
  */
 int ODevice::displayBrightnessResolution() const
 {
     return 16;
 }
 
 /**
 * This sets the display contrast
 * @param p The contrast to be set on a scale from 0 to 255
 * @return success or failure
 */
 bool ODevice::setDisplayContrast ( int p)
 {
         Q_UNUSED( p )
     return false;
 }
 
 /**
 * @return return the max value for the brightness settings slider
 *         or 0 if the device doesn't support setting of a contrast
 */
 int ODevice::displayContrastResolution() const
 {
     return 0;
 }
 
 /**
 * This returns the vendor as string
 * @return Vendor as QString
 */
 QString ODevice::vendorString() const
 {
     return d->m_vendorstr;
 }
 
 /**
 * This returns the vendor as one of the values of OVendor
 * @return OVendor
 */
 OVendor ODevice::vendor() const
 {
     return d->m_vendor;
 }
 
 /**
 * This returns the model as a string
 * @return A string representing the model
 */
 QString ODevice::modelString() const
 {
     return d->m_modelstr;
 }
 
 /**
 * This does return the OModel used
 */
 OModel ODevice::model() const
 {
     return d->m_model;
 }
 
 /**
 * This does return the systen name
 */
 QString ODevice::systemString() const
 {
     return d->m_systemstr;
 }
 
 /**
 * Return System as OSystem value
 */
 OSystem ODevice::system() const
 {
     return d->m_system;
 }
 
 /**
 * @return the version string of the base system
 */
 QString ODevice::systemVersionString() const
 {
     return d->m_sysverstr;
 }
 
 /**
 *  @return the current Transformation
 */
 Transformation ODevice::rotation() const
 {
     return d->m_rotation;
 }
 
 /**
 *  @return the current rotation direction
 */
 ODirection ODevice::direction() const
 {
     return d->m_direction;
 }
 
 /**
 * This plays an alarm sound
 */
 void ODevice::playAlarmSound()
 {
 #ifndef QT_NO_SOUND
     static Sound snd ( "alarm" );
 
     if ( snd. isFinished())
         snd. play();
 #endif
 }
 
 /**
 * This plays a key sound
 */
 void ODevice::playKeySound()
 {
 #ifndef QT_NO_SOUND
     static Sound snd ( "keysound" );
 
     if ( snd. isFinished())
         snd. play();
 #endif
 }
 
 /**
 * This plays a touch sound
 */
 void ODevice::playTouchSound()
 {
 #ifndef QT_NO_SOUND
     static Sound snd ( "touchsound" );
 
     if ( snd. isFinished())
         snd. play();
 #endif
 }
 
 /**
 * This method will return a list of leds
 * available on this device
 * @return a list of LEDs.
 */
 QValueList <OLed> ODevice::ledList() const
 {
     return QValueList <OLed>();
 }
 
 /**
 * This does return the state of the LEDs
 */
 QValueList <OLedState> ODevice::ledStateList ( OLed /*which*/ ) const
 {
     return QValueList <OLedState>();
 }
 
 /**
 * @return the state for a given OLed
 */
 OLedState ODevice::ledState ( OLed /*which*/ ) const
 {
     return Led_Off;
 }
 
 /**
 * Set the state for a LED
 * @param which Which OLed to use
 * @param st The state to set
 * @return success or failure
 */
 bool ODevice::setLedState ( OLed which, OLedState st )
 {
         Q_UNUSED( which )
         Q_UNUSED( st    )
     return false;
 }
 
 /**
 * @return if the device has a light sensor
 */
 bool ODevice::hasLightSensor() const
 {
     return false;
 }
 
 /**
 * @return a value from the light sensor
 */
 int ODevice::readLightSensor()
 {
     return -1;
 }
 
 /**
 * @return the light sensor resolution
 */
 int ODevice::lightSensorResolution() const
 {
     return 0;
 }
 
 /**
 * @return if the device has a hinge sensor
 */
 bool ODevice::hasHingeSensor() const
 {
     return false;
 }
 
 /**
 * @return a value from the hinge sensor
 */
 OHingeStatus ODevice::readHingeSensor()
 {
     return CASE_UNKNOWN;
 }
 
 /**
 * @return a list with CPU frequencies supported by the hardware
 */
 const QStrList &ODevice::allowedCpuFrequencies() const
 {
     return *d->m_cpu_frequencies;
 }
 
 
 /**
 * Set desired CPU frequency
 *
 * @param index index into d->m_cpu_frequencies of the frequency to be set
 */
 bool ODevice::setCurrentCpuFrequency(uint index)
 {
     if (index >= d->m_cpu_frequencies->count())
         return false;
 
     char *freq = d->m_cpu_frequencies->at(index);
     qWarning("set freq to %s", freq);
 
     int fd;
 
     if ((fd = ::open("/proc/sys/cpu/0/speed", O_WRONLY)) >= 0) {
         char writeCommand[50];
         const int count = sprintf(writeCommand, "%s\n", freq);
         int res = (::write(fd, writeCommand, count) != -1);
         ::close(fd);
         return res;
     }
 
     return false;
 }
 
 
 /**
 * @return a list of hardware buttons
 */
 const QValueList <ODeviceButton> &ODevice::buttons()
 {
     initButtons();
 
     return *d->m_buttons;
 }
 
 /**
 * @return The amount of time that would count as a hold
 */
 uint ODevice::buttonHoldTime() const
 {
     return d->m_holdtime;
 }
 
 /**
 * This method return a ODeviceButton for a key code
 * or 0 if no special hardware button is available for the device
 *
 * @return The devicebutton or 0l
 * @see ODeviceButton
 */
 const ODeviceButton *ODevice::buttonForKeycode ( ushort code )
 {
     initButtons();
 
     for ( QValueListConstIterator<ODeviceButton> it = d->m_buttons->begin(); it != d->m_buttons->end(); ++it ) {
         if ( (*it). keycode() == code )
             return &(*it);
     }
     return 0;
 }
 
 void ODevice::reloadButtonMapping()
 {
+    if(!d->m_buttons)
     initButtons();
     
     if(!d->m_initializedButtonQcop) {
-	QCopChannel *chan = new QCopChannel("QPE/System", this, "ODevice button channel");
-	connect(chan,SIGNAL(received(const QCString&,const QByteArray&)),
+	connect(qApp,SIGNAL(systemMessageSignal(const QCString&,const QByteArray&)),
 		this,SLOT(systemMessage(const QCString&,const QByteArray&)));
 	d->m_initializedButtonQcop = true;
     }
 
     Config cfg ( "ButtonSettings" );
 
     for ( uint i = 0; i < d->m_buttons->count(); i++ ) {
         ODeviceButton &b = ( *d->m_buttons ) [i];
         QString group = "Button" + QString::number ( i );
 
         QCString pch, hch;
         QCString pm, hm;
         QByteArray pdata, hdata;
 
         if ( cfg. hasGroup ( group )) {
             cfg. setGroup ( group );
             pch = cfg. readEntry ( "PressedActionChannel" ). latin1();
             pm  = cfg. readEntry ( "PressedActionMessage" ). latin1();
             // pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" ));
 
             hch = cfg. readEntry ( "HeldActionChannel" ). latin1();
             hm  = cfg. readEntry ( "HeldActionMessage" ). latin1();
             // hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" ));
         }
 
         b. setPressedAction ( OQCopMessage ( pch, pm, pdata ));
 
         b. setHeldAction ( OQCopMessage ( hch, hm, hdata ));
     }
 }
 
 void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
 {
     initButtons();
 
     QString mb_chan;
 
     if ( button >= (int) d->m_buttons->count())
         return;
 
     ODeviceButton &b = ( *d->m_buttons ) [button];
         b. setPressedAction ( action );
 
     mb_chan=b. pressedAction(). channel();
 
     Config buttonFile ( "ButtonSettings" );
     buttonFile. setGroup ( "Button" + QString::number ( button ));
     buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan);
     buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction(). message());
 
 //  buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction(). data()));
 
     QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 void ODevice::remapHeldAction ( int button, const OQCopMessage &action )
 {
     initButtons();
 
     if ( button >= (int) d->m_buttons->count())
         return;
 
     ODeviceButton &b = ( *d->m_buttons ) [button];
         b. setHeldAction ( action );
 
     Config buttonFile ( "ButtonSettings" );
     buttonFile. setGroup ( "Button" + QString::number ( button ));
     buttonFile. writeEntry ( "HeldActionChannel", (const char *) b. heldAction(). channel());
     buttonFile. writeEntry ( "HeldActionMessage", (const char *) b. heldAction(). message());
 
 //  buttonFile. writeEntry ( "HeldActionArgs", decodeBase64 ( b. heldAction(). data()));
 
     QCopEnvelope ( "QPE/System", "deviceButtonMappingChanged()" );
 }
 
 /**
  * @internal
  */
 void ODevice::virtual_hook(int, void* ){
 
 }
 
 /**
  * \brief Send a QCOP Message before suspending
  *
  * Sends a QCOP message to channel QPE/System
  * with the message "aboutToSuspend()" if this
  * is the windowing server.
  * 
  * Call this in your custom \sa suspend() Method
  * before going to suspend.
  * 
  */
 void ODevice::sendSuspendmsg()
 {
     if ( isQWS() )
         return;
 
     QCopEnvelope ( "QPE/System", "aboutToSuspend()" );
 }
 
 /**
  * \brief Prepend the QWSServer::KeyboardFilter to the list of installed KeyFilters
  *
  * Prepend a QWSServer::KeyboardFilter to the List of Keyboard
  * Filters. This function is the only way to prepend a KeyFilter.
  *
  * @param aFilter The KeyFilter to be prepended to the list of filters
  *
  * @see Opie::Core::OKeyFilter
  * @see Opie::Core::OKeyFilter::inst()
  */
 void ODevice::addPreHandler(QWSServer::KeyboardFilter*aFilter)
 {
     Opie::Core::OKeyFilter::inst()->addPreHandler(aFilter);
 }
 
 /**
  * \brief Remove the QWSServer::KeyboardFilter in the param from the list
  *
  * Remove the QWSServer::KeyboardFilter \par aFilter from the List
  * of Keyfilters. Call this when you delete the KeyFilter!
  *
  * @param aFilter The filter to be removed from the Opie::Core::OKeyFilter
  * @see Opie::Core::ODevice::addPreHandler
  */
 void ODevice::remPreHandler(QWSServer::KeyboardFilter*aFilter)
 {
     Opie::Core::OKeyFilter::inst()->remPreHandler(aFilter);
 }
 
 
 /**
  * @internal
  * 
  * @see changeMixerForAlarm
  */
 void ODevice::playingStopped() {
     if ( sender() )
 	const_cast<QObject*>(sender())->disconnect( this );
 
 #ifndef QT_NO_SOUND
     if ( d->m_sound >= 0 ) {
         ::ioctl ( d->m_sound, MIXER_WRITE( d->m_mixer ), &d->m_vol );
         ::close ( d->m_sound );
     }
 #endif
 }
 
 
 /**
  * \brief Change the Volume for the Alarm and set it back after playing is finished
  *
  * If you play an Alarm Sound you might want to change the Mixer to
  * full volume and ignore the user setting. After it \sa Sound::isFinished
  * you would turn the volume back to the user preference.
  * The problem is that we used to enter the event loop while waiting
  * for the sound to be finished triggering all kind of reentrance
  * problems what a library shouldn't introduce.
  * Instead of manually waiting for the sound to be finished use
  * this Method and it will automatically restore the Mixer to
  * the user configuration after the sound finished playing.
  *
  * Note: The onwership of \param snd is not transfered and playing
  * is not started in this method. If 'snd' gets deleted before
  * playing is finished the volume doesn't get set back to
  * the user preference!
  *
  * \code
  * static Sound snd("alarm");
  * if(!snd.isFinished())
  *    return;
  *
  * changeMixerForAlarm( my_channel, "/dev/mixer", &snd );
  * snd.play()
  * \endcode
  * 
  * 
  *
  * @param mixer The mixer number/channel to use
  * @param file  The file name. If you convert from QString use QFile::encodeName
  * @param snd   The sound to wait for finishing
  * 
  */
 void ODevice::changeMixerForAlarm( int mixer, const char* file, Sound *snd ) {
 #ifndef QT_NO_SOUND
     if (( d->m_sound = ::open ( file, O_RDWR )) >= 0 ) {
         if ( ::ioctl ( d->m_sound, MIXER_READ( mixer ), &d->m_vol ) >= 0 ) {
             Config cfg ( "qpe" );
             cfg. setGroup ( "Volume" );
 
             int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
             if ( volalarm < 0 )
                 volalarm = 0;
             else if ( volalarm > 100 )
                 volalarm = 100;
             volalarm |= ( volalarm << 8 );
 
             if ( ::ioctl ( d->m_sound, MIXER_WRITE( mixer ), &volalarm ) >= 0 )
                 register_qpe_sound_finished(snd, this, SLOT(playingStopped()));
         }
         d->m_mixer = mixer;
     }
 #endif
 }
 
 }
 }