- extend file transfer dialog so it can receive too (without filename argument)

- fix error messages so they match the error code
- don't show dialog maximized. It's still modal but we're coming near...
- reset status to "ready" after interrupting or finishing operation
- bugfix in filetransfer.cpp: don't kill process if pid is not set
   => before the fix, cancel() killed random processes!

4 files changed, 79 insertions, 40 deletions

diff --git a/noncore/apps/opie-console/filetransfer.cpp b/noncore/apps/opie-console/filetransfer.cpp
index 8e86ebb..14787f6 100644
--- a/noncore/apps/opie-console/filetransfer.cpp
+++ b/noncore/apps/opie-console/filetransfer.cpp
@@ -1,65 +1,65 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <errno.h>
 #include <fcntl.h>
 #include <unistd.h>
 
 #include <qcstring.h>
 #include <qsocketnotifier.h>
 
 #include <opie/oprocess.h>
 
 #include "procctl.h"
 #include "filetransfer.h"
 
 
 FileTransfer::FileTransfer( Type t, IOLayer* lay )
-    : FileTransferLayer( lay ), m_type( t ) {
+    : FileTransferLayer( lay ), m_type( t ), m_pid ( 0 ) {
     signal(SIGPIPE,  SIG_IGN );
 
     m_not = 0l;
     m_proc = 0l;
 }
 FileTransfer::~FileTransfer() {
 }
 
 /**
  * now we will send the file.
  *
  * we request an fd. The IOLayer should be closed
  * then we will setup a pipe for progress communication
  * then we will dup2 the m_fd in the forked process
  * to do direct IO from and to the fd
  */
 void FileTransfer::sendFile( const QString& file ) {
     m_prog =-1;
     m_fd = layer()->rawIO();
 //
 //    m_fd = ::open("/dev/ttyS0", O_RDWR);
 
     m_file = file;
     if ( pipe( m_comm ) < 0 )
         m_comm[0] = m_comm[1] = 0;
     if ( pipe( m_info ) < 0 )
         m_info[0] = m_info[1] = 0;
 
 
     m_pid = fork();
     switch( m_pid ) {
     case -1:
         emit error( StartError, tr("Was not able to fork") );
         break;
     case 0:{
         setupChild();
         qWarning("output:"+file );
         /* exec */
         char* verbose = "-vv";
         char* binray = "-b";
 
 
         char* typus;
         switch(m_type ) {
         case SZ:
             typus = "";
             break;
         case SX:
@@ -190,64 +190,64 @@ void FileTransfer::slotRead() {
 /*
  * find the progress
  */
 void FileTransfer::slotProgress( const QStringList& list ) {
     if ( m_type != SZ )
         return;
     bool complete = true;
     int min, sec;
     int bps;
     unsigned long sent, total;
 
     min = sec = bps = -1;
     sent = total = 0;
 
     // Data looks like this
     //  0      1         2          3      4     5
     // Bytes Sent 65536/11534336 BPS:7784 ETA 24:33
     QStringList progi = QStringList::split('/', list[2].simplifyWhiteSpace()  );
     sent  = progi[0].toULong(&complete );
     if (!complete ) return;
 
     total = progi[1].toULong(&complete );
     if (!complete || total == 0) {
         return;
     }
 
     qWarning("%s, %d, %d",  progi.join("/").latin1(), sent, total );
 
     double pro = (double)sent/total;
     int prog = pro * 100;
 
     // speed
     progi = QStringList::split(':', list[3].simplifyWhiteSpace() );
     bps = progi[1].toInt();
 
     // time
     progi = QStringList::split(':', list[5].simplifyWhiteSpace() );
     min = progi[0].toInt();
     sec = progi[1].toInt();
 
 
     if ( prog > m_prog ) {
         m_prog = prog;
         emit progress(m_file, m_prog, bps, -1, min , sec );
     }
 
 }
 void FileTransfer::cancel() {
-    ::kill(m_pid,9 );
+    if(m_pid > 0) ::kill(m_pid,9 );
     delete m_not;
 }
 void FileTransfer::slotExec() {
     qWarning("exited!");
     char buf[2];
     ::read(m_term[0], buf, 1 );
     delete m_proc;
     delete m_not;
     m_proc = m_not = 0l;
     close( m_term[0] );
     close( m_term[1] );
     close( m_comm[0] );
     close( m_comm[1] );
     emit sent();
 }
diff --git a/noncore/apps/opie-console/mainwindow.cpp b/noncore/apps/opie-console/mainwindow.cpp
index 3af0cba..8f5d56b 100644
--- a/noncore/apps/opie-console/mainwindow.cpp
+++ b/noncore/apps/opie-console/mainwindow.cpp
@@ -216,60 +216,60 @@ void MainWindow::slotConfigure() {
 
     if ( QDialog::Accepted == ret ) {
         qWarning("conf %d", conf.list().count() );
         manager()->setProfiles( conf.list() );
         populateProfiles();
     }
 }
 /*
  * we will remove
  * this window from the tabwidget
  * remove it from the list
  * delete it
  * and set the currentSession()
  */
 void MainWindow::slotClose() {
     qWarning("close");
     if (!currentSession() )
         return;
 
     tabWidget()->remove( currentSession() );
     /*it's autodelete */
     m_sessions.remove( m_curSession );
     m_curSession = m_sessions.first();
     tabWidget()->setCurrent( m_curSession );
 }
 
 /*
  * We will get the name
  * Then the profile
  * and then we will make a profile
  */
 void MainWindow::slotProfile( int id) {
     Profile prof = manager()->profile( m_sessionsPop->text( id)  );
     create( prof );
 }
 void MainWindow::create( const Profile& prof ) {
     Session *ses = manager()->fromProfile( prof, tabWidget() );
 
     m_sessions.append( ses );
     tabWidget()->add( ses );
     m_curSession = ses;
 
 }
 
 void MainWindow::slotTransfer()
 {
     if ( currentSession() ) {
 	TransferDialog dlg(this);
-	dlg.showMaximized();
+	//dlg.showMaximized();
 	dlg.exec();
     }
 }
 
 
 void MainWindow::slotOpenKeb(bool state) {
 
     if (state) m_keyBar->show();
     else m_keyBar->hide();
 
 }
diff --git a/noncore/apps/opie-console/transferdialog.cpp b/noncore/apps/opie-console/transferdialog.cpp
index ba06199..d3b9c0a 100644
--- a/noncore/apps/opie-console/transferdialog.cpp
+++ b/noncore/apps/opie-console/transferdialog.cpp
@@ -1,187 +1,218 @@
 #include <qlayout.h>
 #include <qcombobox.h>
 #include <qlabel.h>
 #include <qlineedit.h>
 #include <qpushbutton.h>
 #include <qmessagebox.h>
 #include <qprogressbar.h>
+#include <qradiobutton.h>
+#include <qbuttongroup.h>
 
 #include <opie/ofiledialog.h>
 
 #include "filetransfer.h"
 #include "io_serial.h"
 #include "metafactory.h"
 #include "mainwindow.h"
 
 #include "transferdialog.h"
 
-
-
-
-
-
-
 TransferDialog::TransferDialog(MainWindow *parent, const char *name)
-: QDialog(/*parent, name*/0l, 0l, true), m_win(parent)
+: QDialog(0l, 0l, true), m_win(parent)
 {
-        m_lay = 0l;
-	QVBoxLayout *vbox;
-	QHBoxLayout *hbox, *hbox2;
+    m_lay = 0l;
+	QVBoxLayout *vbox, *vbox2;
+	QHBoxLayout *hbox, *hbox2, *hbox3;
 	QLabel *file, *mode, *progress, *status;
-	QPushButton *selector;
-
+	QButtonGroup *group;
+	QRadioButton *mode_send, *mode_receive;
+
+	group = new QButtonGroup(QObject::tr("Transfer mode"), this);
+	mode_send = new QRadioButton(QObject::tr("Send"), group);
+	mode_receive = new QRadioButton(QObject::tr("Receive"), group);
+	group->insert(mode_send, id_send);
+	group->insert(mode_receive, id_receive);
+	vbox2 = new QVBoxLayout(group, 2);
+	vbox2->addSpacing(10);
+	hbox3 = new QHBoxLayout(vbox2, 2);
+	hbox3->add(mode_send);
+	hbox3->add(mode_receive);
+	mode_send->setChecked(true);
+	m_transfermode = id_send;
 
 	file = new QLabel(QObject::tr("Send file"), this);
-	mode = new QLabel(QObject::tr("Transfer mode"), this);
+	mode = new QLabel(QObject::tr("Transfer protocol"), this);
 	progress = new QLabel(QObject::tr("Progress"), this);
 	status = new QLabel(QObject::tr("Status"), this);
 
-	statusbar = new QLabel(QObject::tr("ready"), this);
+	statusbar = new QLabel(QObject::tr("Ready"), this);
 	statusbar->setFrameStyle(QFrame::Panel | QFrame::Sunken);
 
 	protocol = new QComboBox(this);
-        /* use the fscking MetaFactory
-         * because we invented it for that fscking reason
-         * I'm really getting UPSET!!!!
-         */
-        QStringList list = m_win->factory()->fileTransferLayers();
-        for (QStringList::Iterator it =list.begin(); it != list.end(); ++it ) {
-            protocol->insertItem( (*it) );
-        }
+	QStringList list = m_win->factory()->fileTransferLayers();
+	for (QStringList::Iterator it = list.begin(); it != list.end(); ++it)
+		protocol->insertItem((*it));
 
 	filename = new QLineEdit(this);
 
 	progressbar = new QProgressBar(this);
 	progressbar->setProgress(0);
 
 	selector = new QPushButton("...", this);
 	ok = new QPushButton(QObject::tr("Start transfer"), this);
 	cancel = new QPushButton(QObject::tr("Cancel"), this);
 
 	vbox = new QVBoxLayout(this, 2);
+	vbox->add(group);
 	vbox->add(file);
 	hbox = new QHBoxLayout(vbox, 0);
 	hbox->add(filename);
 	hbox->add(selector);
 	vbox->add(mode);
 	vbox->add(protocol);
 	vbox->add(progress);
 	vbox->add(progressbar);
 	vbox->add(status);
 	vbox->add(statusbar);
 	vbox->addStretch(1);
 	hbox2 = new QHBoxLayout(vbox, 2);
 	hbox2->add(ok);
 	hbox2->add(cancel);
 
 	setCaption(QObject::tr("File transfer"));
 	show();
 
 	connect(selector, SIGNAL(clicked()), SLOT(slotFilename()));
 	connect(ok, SIGNAL(clicked()), SLOT(slotTransfer()));
 	connect(cancel, SIGNAL(clicked()), SLOT(slotCancel()));
+	connect(group, SIGNAL(clicked(int)), SLOT(slotMode(int)));
 }
 
 TransferDialog::~TransferDialog()
 {
 }
 
 void TransferDialog::slotFilename()
 {
 	QString f;
 
 	f = OFileDialog::getOpenFileName(0);
 	if(!f.isNull()) filename->setText(f);
 }
 
 void TransferDialog::slotTransfer()
 {
-	if(filename->text().isEmpty())
+	if((m_transfermode == id_send) && (filename->text().isEmpty()))
 	{
 		QMessageBox::information(this,
 			QObject::tr("Attention"),
 			QObject::tr("No file has been specified."));
 		return;
 	}
 
 	ok->setEnabled(false);
 
-	statusbar->setText(QObject::tr("Sending..."));
+	if(m_transfermode == id_send) statusbar->setText(QObject::tr("Sending..."));
+	else statusbar->setText(QObject::tr("Receiving..."));
 
-	m_lay = m_win->factory()->newFileTransfer( protocol->currentText(),
-                                                   m_win->currentSession()->layer() );
-	m_lay->sendFile(filename->text());
+	m_lay = m_win->factory()->newFileTransfer(protocol->currentText(), m_win->currentSession()->layer());
+	if(m_transfermode == id_send)
+	{
+		m_lay->sendFile(filename->text());
+	}
+	else
+	{
+	}
 
- 	connect(m_lay, SIGNAL(progress(const QString&, int, int, int, int, int)), SLOT(slotProgress(const QString&, int, int, int, int, int)));
+	connect(m_lay, SIGNAL(progress(const QString&, int, int, int, int, int)), SLOT(slotProgress(const QString&, int, int, int, int, int)));
 	connect(m_lay, SIGNAL(error(int, const QString&)), SLOT(slotError(int, const QString&)));
 	connect(m_lay, SIGNAL(sent()), SLOT(slotSent()));
 }
 
 void TransferDialog::slotCancel()
 {
 	ok->setEnabled(true);
+	statusbar->setText(QObject::tr("Ready"));
 
 	if(m_lay)
 	{
 		m_lay->cancel();
-		delete  m_lay;
+		delete m_lay;
 		m_lay = 0l;
 		QMessageBox::information(this,
 			QObject::tr("Cancelled"),
 			QObject::tr("The file transfer has been cancelled."));
 	}
 	else
 	{
 		close();
 	}
 }
 
 void TransferDialog::slotProgress(const QString& file, int progress, int speed, int hours, int minutes, int seconds)
 {
 	progressbar->setProgress(progress);
 }
 
 void TransferDialog::slotError(int error, const QString& message)
 {
+	statusbar->setText(QObject::tr("Ready"));
+
 	switch(error)
 	{
 			case FileTransferLayer::NotSupported:
 				QMessageBox::critical(this,
 					QObject::tr("Error"),
 					QObject::tr("Operation not supported."));
 				break;
 			case FileTransferLayer::StartError:
 				QMessageBox::critical(this,
 					QObject::tr("Error"),
-					QObject::tr("Operation not supported."));
+					QObject::tr("Transfer could not be started."));
 				break;
 			case FileTransferLayer::NoError:
 				QMessageBox::critical(this,
 					QObject::tr("Error"),
-					QObject::tr("Operation not supported."));
+					QObject::tr("No error."));
 				break;
 			case FileTransferLayer::Undefined:
 				QMessageBox::critical(this,
 					QObject::tr("Error"),
-					QObject::tr("Operation not supported."));
+					QObject::tr("Undefined error occured."));
 				break;
 			case FileTransferLayer::Incomplete:
 				QMessageBox::critical(this,
 					QObject::tr("Error"),
-					QObject::tr("Operation not supported."));
+					QObject::tr("Incomplete transfer."));
 				break;
 			case FileTransferLayer::Unknown:
 			default:
 				QMessageBox::critical(this,
 					QObject::tr("Error"),
-					QObject::tr("Operation not supported."));
+					QObject::tr("Unknown error occured."));
 				break;
 	}
 }
 
 void TransferDialog::slotSent()
 {
 	QMessageBox::information(this, QObject::tr("Sent"), QObject::tr("File has been sent."));
 	ok->setEnabled(true);
+	statusbar->setText(QObject::tr("Ready"));
+}
+
+void TransferDialog::slotMode(int id)
+{
+	if(id == id_send)
+	{
+		selector->setEnabled(true);
+		filename->setEnabled(true);
+	}
+	else
+	{
+		selector->setEnabled(false);
+		filename->setEnabled(false);
+	}
+	m_transfermode = id;
 }
 
diff --git a/noncore/apps/opie-console/transferdialog.h b/noncore/apps/opie-console/transferdialog.h
index b0c1a76..a567161 100644
--- a/noncore/apps/opie-console/transferdialog.h
+++ b/noncore/apps/opie-console/transferdialog.h
@@ -1,40 +1,48 @@
 #ifndef TRANSFER_DIALOG_H
 #define TRANSFER_DIALOG_H
 
 #include "qdialog.h"
 
 class QLineEdit;
 class QComboBox;
 class QProgressBar;
 class QLabel;
 class QPushButton;
 class MainWindow;
 class FileTransferLayer;
 
 class TransferDialog : public QDialog
 {
 	Q_OBJECT
 	public:
 		TransferDialog(MainWindow *parent = 0l, const char *name = 0l);
 		~TransferDialog();
 
 	public slots:
 		void slotFilename();
 		void slotTransfer();
 		void slotCancel();
 		void slotProgress(const QString&, int, int, int, int, int);
 		void slotError(int error, const QString& message);
 		void slotSent();
+		void slotMode(int id);
 
 	private:
+		enum Modes
+		{
+			id_send,
+			id_receive
+		};
+
 		QLineEdit *filename;
 		QComboBox *protocol;
 		QProgressBar *progressbar;
 		QLabel *statusbar;
-		QPushButton *ok, *cancel;
-                MainWindow* m_win;
-                FileTransferLayer* m_lay;
+		QPushButton *ok, *cancel, *selector;
+		MainWindow* m_win;
+		FileTransferLayer* m_lay;
+		int m_transfermode;
 };
 
 #endif