Use QObject::tr rather than qApp->translate

1 files changed, 3 insertions, 3 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index d5e3c5c..80975c9 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -231,97 +231,97 @@ ODevice *ODevice::inst ( )
 }
 
 
 /**************************************************
  *
  * common
  *
  **************************************************/
 
 
 ODevice::ODevice ( )
 {
 	d = new ODeviceData;
 
 	d-> m_qwsserver = qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 
 	d-> m_modelstr = "Unknown";
 	d-> m_model = Model_Unknown;
 	d-> m_vendorstr = "Unknown";
 	d-> m_vendor = Vendor_Unknown;
 	d-> m_systemstr = "Unknown";
 	d-> m_system = System_Unknown;
 	d-> m_sysverstr = "0.0";
 	d-> m_rotation = Rot0;
 	
 	d-> m_holdtime = 1000; // 1000ms
 	
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));	                     	
 }
 
 void ODevice::systemMessage ( const QCString &msg, const QByteArray & )
 {
 	if ( msg == "deviceButtonMappingChanged()" ) {
 		reloadButtonMapping ( );
 	} 
 }
 
 void ODevice::init ( )
 {
 	// Simulation uses iPAQ 3660 device buttons
 
 	for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
 		i_button *ib = ipaq_buttons + i;	
 		ODeviceButton b;
 		
 		if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {		
 			b. setKeycode ( ib-> code );
-			b. setUserText ( qApp-> translate ( "Button", ib-> utext ));
+			b. setUserText ( QObject::tr ( "Button", ib-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
 			d-> m_buttons. append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 }
 
 ODevice::~ODevice ( )
 {
 	delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
 	return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 
 bool ODevice::suspend ( )
 {
 	if ( !d-> m_qwsserver ) // only qwsserver is allowed to suspend
 		return false;
 
 	if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
 		return false;
 
 	bool res = false;
 	
 	struct timeval tvs, tvn;
 	::gettimeofday ( &tvs, 0 );
 	
 	::sync ( ); // flush fs caches
 	res = ( ::system ( "apm --suspend" ) == 0 );
 
 	// This is needed because the iPAQ apm implementation is asynchronous and we
 	// can not be sure when exactly the device is really suspended
 	// This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
 	if ( res ) {	
 		do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
 			::usleep ( 200 * 1000 );
 			::gettimeofday ( &tvn, 0 );				
@@ -589,97 +589,97 @@ void iPAQ::init ( )
 		else if ( d-> m_modelstr == "H3600" )
 			d-> m_model = Model_iPAQ_H36xx;
 		else if ( d-> m_modelstr == "H3700" )
 			d-> m_model = Model_iPAQ_H37xx;
 		else if ( d-> m_modelstr == "H3800" )
 			d-> m_model = Model_iPAQ_H38xx;
 		else if ( d-> m_modelstr == "H3900" )
 			d-> m_model = Model_iPAQ_H39xx;
 		else
 			d-> m_model = Model_Unknown;
 
 		f. close ( );
 	}
 
 	switch ( d-> m_model ) {
 		case Model_iPAQ_H31xx:
 		case Model_iPAQ_H38xx:
 			d-> m_rotation = Rot90;
 			break;
 		case Model_iPAQ_H36xx:
 		case Model_iPAQ_H37xx:
 		case Model_iPAQ_H39xx:
 		default:
 			d-> m_rotation = Rot270;
 			break;
 	}
 
 	f. setName ( "/etc/familiar-version" );
 	if ( f. open ( IO_ReadOnly )) { 
 		d-> m_systemstr = "Familiar";
 		d-> m_system = System_Familiar;
 		
 		QTextStream ts ( &f );
 		d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
 		
 		f. close ( );
 	}
 
 	m_leds [0] = m_leds [1] = Led_Off;
 	
 	m_power_timer = 0;
 	
 	for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
 		i_button *ib = ipaq_buttons + i;	
 		ODeviceButton b;
 		
 		if (( ib-> model & d-> m_model ) == d-> m_model ) {		
 			b. setKeycode ( ib-> code );
-			b. setUserText ( qApp-> translate ( "Button", ib-> utext ));
+			b. setUserText ( QObject::tr ( "Button", ib-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
                                         
 			d-> m_buttons. append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 	
 	if ( d-> m_qwsserver )
 		QWSServer::setKeyboardFilter ( this );	
 }
 
 //#include <linux/h3600_ts.h>  // including kernel headers is evil ...
 
 typedef struct {
   unsigned char OffOnBlink;       /* 0=off 1=on 2=Blink */
   unsigned char TotalTime;        /* Units of 5 seconds */
   unsigned char OnTime;           /* units of 100m/s */
   unsigned char OffTime;          /* units of 100m/s */
 } LED_IN;
 
 typedef struct {
 	unsigned char mode;
 	unsigned char pwr;
 	unsigned char brightness;
 } FLITE_IN;
 
 #define LED_ON    OD_IOW( 'f', 5, LED_IN )
 #define FLITE_ON  OD_IOW( 'f', 7, FLITE_IN )
 
 
 QValueList <OLed> iPAQ::ledList ( ) const
 {
 	QValueList <OLed> vl;
 	vl << Led_Power;
 
 	if ( d-> m_model == Model_iPAQ_H38xx )
 		vl << Led_BlueTooth;
 	return vl;
 }
 
 QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const
 {
 	QValueList <OLedState> vl;
 
 	if ( l == Led_Power )
 		vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast;
@@ -954,97 +954,97 @@ void Zaurus::init ( )
 	}
 	else {
 		d-> m_systemstr = "Zaurus";
 		d-> m_system = System_Zaurus;
 	}
 
 	f. setName ( "/proc/deviceinfo/product" );
 	if ( f. open ( IO_ReadOnly ) ) {
 		QTextStream ts ( &f );
 		QString model = ts. readLine ( );
 		f. close ( );
 
 		d-> m_modelstr = QString("Zaurus ") + model;
 		if ( model == "SL-5500" )
 			d-> m_model = Model_Zaurus_SL5500;
 		else if ( model == "SL-C700" )
 			d-> m_model = Model_Zaurus_SLC700;
 		else if ( model == "SL-A300" )
 			d-> m_model = Model_Zaurus_SLA300;
 		else if ( model == "SL-B600" || model == "SL-5600" )
 			d-> m_model = Model_Zaurus_SLB600;
 		else
 			d-> m_model = Model_Zaurus_SL5000;
 	}
 	else {
 		d-> m_model = Model_Zaurus_SL5000;
 		d-> m_modelstr = "Zaurus (model unknown)";
 	}
 
 	switch ( d-> m_model ) {
 		case Model_Zaurus_SLC700:
 			/* note for C700, we must check the display rotation
 			 * sensor to set an appropriate value
 			 */
 		case Model_Zaurus_SLA300:
 		case Model_Zaurus_SLB600:
 		case Model_Zaurus_SL5500:
 		case Model_Zaurus_SL5000:
 		default:
 			d-> m_rotation = Rot270;
 			break;
 	}
 
 	for ( uint i = 0; i < ( sizeof( z_buttons ) / sizeof( z_button )); i++ ) {
 		z_button *zb = z_buttons + i;	
 		ODeviceButton b;
 		
 		b. setKeycode ( zb-> code );
-		b. setUserText ( qApp-> translate ( "Button", zb-> utext ));
+		b. setUserText ( QObject::tr ( "Button", zb-> utext ));
 		b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
 		b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), zb-> fpressedaction ));
 		b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), zb-> fheldaction ));
                                         
 		d-> m_buttons. append ( b );
 	}
 	reloadButtonMapping ( );
 
 	m_leds [0] = Led_Off;
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
 #define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
 //#define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */
 //#define SHARP_PDA_ERRORSOUND       5  /* error occurred */
 //#define SHARP_PDA_CRITICALSOUND    6  /* critical error occurred */
 //#define SHARP_PDA_SYSSTARTSOUND    7  /* system start */
 //#define SHARP_PDA_SYSTEMENDSOUND   8  /* system shutdown */
 //#define SHARP_PDA_APPSTART         9  /* application start */
 //#define SHARP_PDA_APPQUIT         10  /* application ends */