Use QObject::tr rather than qApp->translate

1 files changed, 3 insertions, 3 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index d5e3c5c..80975c9 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -231,97 +231,97 @@ ODevice *ODevice::inst ( )
 }
 
 
 /**************************************************
  *
  * common
  *
  **************************************************/
 
 
 ODevice::ODevice ( )
 {
         d = new ODeviceData;
 
         d-> m_qwsserver = qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 
         d-> m_modelstr = "Unknown";
         d-> m_model = Model_Unknown;
         d-> m_vendorstr = "Unknown";
         d-> m_vendor = Vendor_Unknown;
         d-> m_systemstr = "Unknown";
         d-> m_system = System_Unknown;
         d-> m_sysverstr = "0.0";
         d-> m_rotation = Rot0;
         
         d-> m_holdtime = 1000; // 1000ms
         
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
                 connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));                            
 }
 
 void ODevice::systemMessage ( const QCString &msg, const QByteArray & )
 {
         if ( msg == "deviceButtonMappingChanged()" ) {
                 reloadButtonMapping ( );
         } 
 }
 
 void ODevice::init ( )
 {
         // Simulation uses iPAQ 3660 device buttons
 
         for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
                         i_button *ib = ipaq_buttons + i;
                 ODeviceButton b;
                 
                         if (( ib-> model & Model_iPAQ_H36xx ) == Model_iPAQ_H36xx ) {   
                         b. setKeycode ( ib-> code );
-                        b. setUserText ( qApp-> translate ( "Button", ib-> utext ));
+                        b. setUserText ( QObject::tr ( "Button", ib-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
                         d-> m_buttons. append ( b );
                 }
         }
         reloadButtonMapping ( );
 }
 
 ODevice::~ODevice ( )
 {
         delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
         return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 
 bool ODevice::suspend ( )
 {
         if ( !d-> m_qwsserver ) // only qwsserver is allowed to suspend
                 return false;
 
         if ( d-> m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
                 return false;
 
         bool res = false;
         
         struct timeval tvs, tvn;
         ::gettimeofday ( &tvs, 0 );
         
         ::sync ( ); // flush fs caches
         res = ( ::system ( "apm --suspend" ) == 0 );
 
         // This is needed because the iPAQ apm implementation is asynchronous and we
         // can not be sure when exactly the device is really suspended
         // This can be deleted as soon as a stable familiar with a synchronous apm implementation exists.
 
                 if ( res ) {
                 do { // wait at most 1.5 sec: either suspend didn't work or the device resumed
                         ::usleep ( 200 * 1000 );
                                 ::gettimeofday ( &tvn, 0 );                     
@@ -589,97 +589,97 @@ void iPAQ::init ( )
                 else if ( d-> m_modelstr == "H3600" )
                         d-> m_model = Model_iPAQ_H36xx;
                 else if ( d-> m_modelstr == "H3700" )
                         d-> m_model = Model_iPAQ_H37xx;
                 else if ( d-> m_modelstr == "H3800" )
                         d-> m_model = Model_iPAQ_H38xx;
                 else if ( d-> m_modelstr == "H3900" )
                         d-> m_model = Model_iPAQ_H39xx;
                 else
                         d-> m_model = Model_Unknown;
 
                 f. close ( );
         }
 
         switch ( d-> m_model ) {
                 case Model_iPAQ_H31xx:
                 case Model_iPAQ_H38xx:
                         d-> m_rotation = Rot90;
                         break;
                 case Model_iPAQ_H36xx:
                 case Model_iPAQ_H37xx:
                 case Model_iPAQ_H39xx:
                 default:
                         d-> m_rotation = Rot270;
                         break;
         }
 
         f. setName ( "/etc/familiar-version" );
         if ( f. open ( IO_ReadOnly )) { 
                 d-> m_systemstr = "Familiar";
                 d-> m_system = System_Familiar;
                 
                 QTextStream ts ( &f );
                 d-> m_sysverstr = ts. readLine ( ). mid ( 10 );
                 
                 f. close ( );
         }
 
         m_leds [0] = m_leds [1] = Led_Off;
         
         m_power_timer = 0;
         
         for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
                         i_button *ib = ipaq_buttons + i;
                 ODeviceButton b;
                 
                         if (( ib-> model & d-> m_model ) == d-> m_model ) {     
                         b. setKeycode ( ib-> code );
-                        b. setUserText ( qApp-> translate ( "Button", ib-> utext ));
+                        b. setUserText ( QObject::tr ( "Button", ib-> utext ));
                         b. setPixmap ( Resource::loadPixmap ( ib-> pix ));
                         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib-> fpressedservice ), ib-> fpressedaction ));
                         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib-> fheldservice ), ib-> fheldaction ));
                                         
                         d-> m_buttons. append ( b );
                 }
         }
         reloadButtonMapping ( );
         
         if ( d-> m_qwsserver )
                         QWSServer::setKeyboardFilter ( this );
 }
 
 //#include <linux/h3600_ts.h>  // including kernel headers is evil ...
 
 typedef struct {
   unsigned char OffOnBlink;       /* 0=off 1=on 2=Blink */
   unsigned char TotalTime;        /* Units of 5 seconds */
   unsigned char OnTime;           /* units of 100m/s */
   unsigned char OffTime;          /* units of 100m/s */
 } LED_IN;
 
 typedef struct {
         unsigned char mode;
         unsigned char pwr;
         unsigned char brightness;
 } FLITE_IN;
 
 #define LED_ON    OD_IOW( 'f', 5, LED_IN )
 #define FLITE_ON  OD_IOW( 'f', 7, FLITE_IN )
 
 
 QValueList <OLed> iPAQ::ledList ( ) const
 {
         QValueList <OLed> vl;
         vl << Led_Power;
 
         if ( d-> m_model == Model_iPAQ_H38xx )
                 vl << Led_BlueTooth;
         return vl;
 }
 
 QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const
 {
         QValueList <OLedState> vl;
 
         if ( l == Led_Power )
                 vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast;
@@ -954,97 +954,97 @@ void Zaurus::init ( )
         }
         else {
                 d-> m_systemstr = "Zaurus";
                 d-> m_system = System_Zaurus;
         }
 
         f. setName ( "/proc/deviceinfo/product" );
         if ( f. open ( IO_ReadOnly ) ) {
                 QTextStream ts ( &f );
                 QString model = ts. readLine ( );
                 f. close ( );
 
                 d-> m_modelstr = QString("Zaurus ") + model;
                 if ( model == "SL-5500" )
                         d-> m_model = Model_Zaurus_SL5500;
                 else if ( model == "SL-C700" )
                         d-> m_model = Model_Zaurus_SLC700;
                 else if ( model == "SL-A300" )
                         d-> m_model = Model_Zaurus_SLA300;
                 else if ( model == "SL-B600" || model == "SL-5600" )
                         d-> m_model = Model_Zaurus_SLB600;
                 else
                         d-> m_model = Model_Zaurus_SL5000;
         }
         else {
                 d-> m_model = Model_Zaurus_SL5000;
                 d-> m_modelstr = "Zaurus (model unknown)";
         }
 
         switch ( d-> m_model ) {
                 case Model_Zaurus_SLC700:
                         /* note for C700, we must check the display rotation
                          * sensor to set an appropriate value
                          */
                 case Model_Zaurus_SLA300:
                 case Model_Zaurus_SLB600:
                 case Model_Zaurus_SL5500:
                 case Model_Zaurus_SL5000:
                 default:
                         d-> m_rotation = Rot270;
                         break;
         }
 
         for ( uint i = 0; i < ( sizeof( z_buttons ) / sizeof( z_button )); i++ ) {
                         z_button *zb = z_buttons + i;
                 ODeviceButton b;
                 
                 b. setKeycode ( zb-> code );
-                b. setUserText ( qApp-> translate ( "Button", zb-> utext ));
+                b. setUserText ( QObject::tr ( "Button", zb-> utext ));
                 b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
                 b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), zb-> fpressedaction ));
                 b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), zb-> fheldaction ));
                                         
                 d-> m_buttons. append ( b );
         }
         reloadButtonMapping ( );
 
         m_leds [0] = Led_Off;
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
         #defineSHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
         //#defineSHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */
 //#define SHARP_PDA_ERRORSOUND       5  /* error occurred */
 //#define SHARP_PDA_CRITICALSOUND    6  /* critical error occurred */
 //#define SHARP_PDA_SYSSTARTSOUND    7  /* system start */
 //#define SHARP_PDA_SYSTEMENDSOUND   8  /* system shutdown */
 //#define SHARP_PDA_APPSTART         9  /* application start */
 //#define SHARP_PDA_APPQUIT         10  /* application ends */