-Create the QPE/System channel in ODevice to listen for button remapping

-Remove various connect and QCopChannel creation from actual device implementations


Let us see if that breaks anything, I hope SIMpad still will do fine. We might need to
guard if a qApp exists?

6 files changed, 11 insertions, 17 deletions

diff --git a/libopie2/opiecore/device/odevice.cpp b/libopie2/opiecore/device/odevice.cpp
index 8b64c41..67cae1c 100644
--- a/libopie2/opiecore/device/odevice.cpp
+++ b/libopie2/opiecore/device/odevice.cpp
@@ -133,154 +133,154 @@ ODevice *ODevice::inst()
                 line = s.readLine();
                 if ( line.startsWith( "Hardware" ) )
                 {
                     qDebug( "ODevice() - found '%s'", (const char*) line );
                     cpu_info = line;
                     if ( line.contains( "sharp", false ) ) dev = new Internal::Zaurus();
                     else if ( line.contains( "ipaq", false ) ) dev = new Internal::iPAQ();
                     else if ( line.contains( "simpad", false ) ) dev = new Internal::SIMpad();
                     else if ( line.contains( "jornada", false ) ) dev = new Internal::Jornada();
                     else if ( line.contains( "ramses", false ) ) dev = new Internal::Ramses();
                     else if ( line.contains( "Tradesquare.NL", false ) ) dev = new Internal::Beagle();
                     else qWarning( "ODevice() - unknown hardware - using default." );
                     break;
                 }
             }
         }
         else
         {
             qWarning( "ODevice() - can't open '%s' - unknown hardware - using default.", PATH_PROC_CPUINFO );
         }
         if ( !dev ) dev = new ODevice();
         dev->init(cpu_info);
     }
     return dev;
 }
 
 ODevice::ODevice()
 {
     d = new ODeviceData;
 
     d->m_modelstr = "Unknown";
     d->m_model = Model_Unknown;
     d->m_vendorstr = "Unknown";
     d->m_vendor = Vendor_Unknown;
     d->m_systemstr = "Unknown";
     d->m_system = System_Unknown;
     d->m_sysverstr = "0.0";
     d->m_rotation = Rot0;
     d->m_direction = CW;
 
     d->m_holdtime = 1000; // 1000ms
     d->m_buttons = 0;
     d->m_cpu_frequencies = new QStrList;
 
 
     /* mixer */
     d->m_sound = d->m_vol   = d->m_mixer = -1;
 
+    /* System QCopChannel created */
+    d->m_initializedButtonQcop = false;
+
     // New distribution detection code first checks for legacy distributions,
     // identified by /etc/familiar-version or /etc/oz_version.
     // Then check for OpenEmbedded and lastly, read /etc/issue
 
     for ( unsigned int i = 0; i < sizeof distributions; ++i )
     {
         if ( QFile::exists( distributions[i].sysvfile ) )
         {
             d->m_systemstr = distributions[i].sysstr;
             d->m_system = distributions[i].system;
             d->m_sysverstr = "<Unknown>";
             QFile f( distributions[i].sysvfile );
             if ( f.open( IO_ReadOnly ) )
             {
                 QTextStream ts( &f );
                 d->m_sysverstr = ts.readLine().replace( QRegExp( "\\\\." ), "" );
             }
             break;
         }
     }
 }
 
 void ODevice::systemMessage( const QCString &msg, const QByteArray & )
 {
     if ( msg == "deviceButtonMappingChanged()" ) {
         reloadButtonMapping();
     }
 }
 
 void ODevice::init(const QString&)
 {
 }
 
 /**
 * This method initialises the button mapping
 */
 void ODevice::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     qDebug ( "init Buttons" );
     d->m_buttons = new QValueList <ODeviceButton>;
     for ( uint i = 0; i < ( sizeof( default_buttons ) / sizeof( default_button )); i++ ) {
         default_button *db = default_buttons + i;
         ODeviceButton b;
         b. setKeycode ( db->code );
         b. setUserText ( QObject::tr ( "Button", db->utext ));
         b. setPixmap ( Resource::loadPixmap ( db->pix ));
         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( db->fpressedservice ), db->fpressedaction ));
         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( db->fheldservice ), db->fheldaction ));
         d->m_buttons->append ( b );
     }
 
     reloadButtonMapping();
-
-    QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 ODevice::~ODevice()
 {
 // we leak m_devicebuttons and m_cpu_frequency
 // but it's a singleton and it is not so importantant
 // -zecke
     delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
 {
     return false;
 }
 
 //#include <linux/apm_bios.h>
 
 #define APM_IOC_SUSPEND          OD_IO( 'A', 2 )
 
 /**
 * This method will try to suspend the device
 * It only works if the user is the QWS Server and the apm application
 * is installed.
 * It tries to suspend and then waits some time cause some distributions
 * do have asynchronus apm implementations.
 * This method will either fail and return false or it'll suspend the
 * device and return once the device got woken up
 *
 * @return if the device got suspended
 */
 bool ODevice::suspend()
 {
     if ( !isQWS( ) ) // only qwsserver is allowed to suspend
         return false;
 
     if ( d->m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
         return false;
 
     bool res = false;
     ODevice::sendSuspendmsg();
 
     struct timeval tvs, tvn;
     ::gettimeofday ( &tvs, 0 );
 
     ::sync(); // flush fs caches
     res = ( ::system ( "apm --suspend" ) == 0 );
 
     // This is needed because the iPAQ apm implementation is asynchronous and we
@@ -601,96 +601,103 @@ bool ODevice::setCurrentCpuFrequency(uint index)
         ::close(fd);
         return res;
     }
 
     return false;
 }
 
 
 /**
 * @return a list of hardware buttons
 */
 const QValueList <ODeviceButton> &ODevice::buttons()
 {
     initButtons();
 
     return *d->m_buttons;
 }
 
 /**
 * @return The amount of time that would count as a hold
 */
 uint ODevice::buttonHoldTime() const
 {
     return d->m_holdtime;
 }
 
 /**
 * This method return a ODeviceButton for a key code
 * or 0 if no special hardware button is available for the device
 *
 * @return The devicebutton or 0l
 * @see ODeviceButton
 */
 const ODeviceButton *ODevice::buttonForKeycode ( ushort code )
 {
     initButtons();
 
     for ( QValueListConstIterator<ODeviceButton> it = d->m_buttons->begin(); it != d->m_buttons->end(); ++it ) {
         if ( (*it). keycode() == code )
             return &(*it);
     }
     return 0;
 }
 
 void ODevice::reloadButtonMapping()
 {
     initButtons();
 
+    if(!d->m_initializedButtonQcop) {
+	QCopChannel *chan = new QCopChannel("QPE/System", this, "ODevice button channel");
+	connect(chan,SIGNAL(received(const QCString&,const QByteArray&)),
+		this,SLOT(systemMessage(const QCString&,const QByteArray&)));
+	d->m_initializedButtonQcop = true;
+    }
+
     Config cfg ( "ButtonSettings" );
 
     for ( uint i = 0; i < d->m_buttons->count(); i++ ) {
         ODeviceButton &b = ( *d->m_buttons ) [i];
         QString group = "Button" + QString::number ( i );
 
         QCString pch, hch;
         QCString pm, hm;
         QByteArray pdata, hdata;
 
         if ( cfg. hasGroup ( group )) {
             cfg. setGroup ( group );
             pch = cfg. readEntry ( "PressedActionChannel" ). latin1();
             pm  = cfg. readEntry ( "PressedActionMessage" ). latin1();
             // pdata = decodeBase64 ( buttonFile. readEntry ( "PressedActionArgs" ));
 
             hch = cfg. readEntry ( "HeldActionChannel" ). latin1();
             hm  = cfg. readEntry ( "HeldActionMessage" ). latin1();
             // hdata = decodeBase64 ( buttonFile. readEntry ( "HeldActionArgs" ));
         }
 
         b. setPressedAction ( OQCopMessage ( pch, pm, pdata ));
 
         b. setHeldAction ( OQCopMessage ( hch, hm, hdata ));
     }
 }
 
 void ODevice::remapPressedAction ( int button, const OQCopMessage &action )
 {
     initButtons();
 
     QString mb_chan;
 
     if ( button >= (int) d->m_buttons->count())
         return;
 
     ODeviceButton &b = ( *d->m_buttons ) [button];
         b. setPressedAction ( action );
 
     mb_chan=b. pressedAction(). channel();
 
     Config buttonFile ( "ButtonSettings" );
     buttonFile. setGroup ( "Button" + QString::number ( button ));
     buttonFile. writeEntry ( "PressedActionChannel", (const char*) mb_chan);
     buttonFile. writeEntry ( "PressedActionMessage", (const char*) b. pressedAction(). message());
 
 //  buttonFile. writeEntry ( "PressedActionArgs", encodeBase64 ( b. pressedAction(). data()));
 
diff --git a/libopie2/opiecore/device/odevice.h b/libopie2/opiecore/device/odevice.h
index 6f0d036..21fcc3f 100644
--- a/libopie2/opiecore/device/odevice.h
+++ b/libopie2/opiecore/device/odevice.h
@@ -312,63 +312,64 @@ public:
     /**
      * Reassigns the held action for \a button.  To return to the factory
      * default pass an empty string as \a qcopMessage.
      */
     void remapHeldAction ( int button, const OQCopMessage &qcopMessage );
 
     /**
      * How long (in ms) you have to press a button for a "hold" action
      */
     uint buttonHoldTime() const;
 
 signals:
     void buttonMappingChanged();
 
 private slots:
     void systemMessage ( const QCString &, const QByteArray & );
     void playingStopped();
 
 protected:
     void addPreHandler(QWSServer::KeyboardFilter*aFilter);
     void remPreHandler(QWSServer::KeyboardFilter*aFilter);
     void reloadButtonMapping();
     void changeMixerForAlarm( int mixer, const char* file, Sound *snd);
 
     /*  ugly virtual hook */
     virtual void virtual_hook( int id, void* data );
 };
 
 class ODeviceData {
 
   public:
     QString m_vendorstr;
     OVendor m_vendor;
 
     QString m_modelstr;
     OModel m_model;
 
     QString m_systemstr;
     OSystem m_system;
 
     QString m_sysverstr;
 
     Transformation m_rotation;
     ODirection m_direction;
 
     QValueList <ODeviceButton> *m_buttons;
     uint                        m_holdtime;
     QStrList                   *m_cpu_frequencies;
+    bool	m_initializedButtonQcop : 1;
 
     /* values for changeMixerForAlarm */
     int m_sound, m_vol, m_mixer;
 };
 
 extern bool isQWS();
 extern QCString makeChannel ( const char *str );
 }
 }
 
 
 
 
 #endif
 
diff --git a/libopie2/opiecore/device/odevice_ipaq.cpp b/libopie2/opiecore/device/odevice_ipaq.cpp
index 6193ddc..9e01a0c 100644
--- a/libopie2/opiecore/device/odevice_ipaq.cpp
+++ b/libopie2/opiecore/device/odevice_ipaq.cpp
@@ -144,99 +144,96 @@ void iPAQ::init(const QString& model)
         case Model_iPAQ_H38xx:
             d->m_rotation = Rot90;
             break;
         case Model_iPAQ_H5xxx:
         case Model_iPAQ_H22xx:
             d->m_rotation = Rot0;
             break;
         case Model_iPAQ_H36xx:
         case Model_iPAQ_H37xx:
         case Model_iPAQ_H39xx:
         default:
             d->m_rotation = Rot270;
             break;
 
         }
 
     m_leds [0] = m_leds [1] = Led_Off;
 
     m_power_timer = 0;
 
 }
 
 void iPAQ::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     if ( isQWS( ) ) {
         addPreHandler(this);
     }
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( ipaq_buttons ) / sizeof( i_button )); i++ ) {
         i_button *ib = ipaq_buttons + i;
         ODeviceButton b;
 
         if (( ib->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( ib->code );
             b. setUserText ( QObject::tr ( "Button", ib->utext ));
             b. setPixmap ( Resource::loadPixmap ( ib->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib->fpressedservice ), ib->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib->fheldservice ), ib->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
-
-    QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 QValueList <OLed> iPAQ::ledList() const
 {
     QValueList <OLed> vl;
     vl << Led_Power;
 
     if ( d->m_model == Model_iPAQ_H38xx )
         vl << Led_BlueTooth;
     return vl;
 }
 
 QValueList <OLedState> iPAQ::ledStateList ( OLed l ) const
 {
     QValueList <OLedState> vl;
 
     if ( l == Led_Power )
         vl << Led_Off << Led_On << Led_BlinkSlow << Led_BlinkFast;
     else if ( l == Led_BlueTooth && d->m_model == Model_iPAQ_H38xx )
         vl << Led_Off; // << Led_On << ???
 
     return vl;
 }
 
 OLedState iPAQ::ledState ( OLed l ) const
 {
     switch ( l ) {
         case Led_Power:
             return m_leds [0];
         case Led_BlueTooth:
             return m_leds [1];
         default:
             return Led_Off;
     }
 }
 
 bool iPAQ::setLedState ( OLed l, OLedState st )
 {
     static int fd = ::open ( "/dev/touchscreen/0", O_RDWR | O_NONBLOCK );
 
     if ( l == Led_Power ) {
         if ( fd >= 0 ) {
             LED_IN leds;
             ::memset ( &leds, 0, sizeof( leds ));
             leds. TotalTime  = 0;
             leds. OnTime     = 0;
             leds. OffTime    = 1;
             leds. OffOnBlink = 2;
diff --git a/libopie2/opiecore/device/odevice_jornada.cpp b/libopie2/opiecore/device/odevice_jornada.cpp
index 2cab0c8..8141f1c 100644
--- a/libopie2/opiecore/device/odevice_jornada.cpp
+++ b/libopie2/opiecore/device/odevice_jornada.cpp
@@ -95,99 +95,96 @@ struct j_button jornada56x_buttons [] = {
     Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Todo Button"),
     "devicebuttons/jornada56x_todo",
     "todolist", "raise()",
     "todolist", "create()" },
     { Model_Jornada_56x,
     Qt::Key_F8, QT_TRANSLATE_NOOP("Button", "Home Button"),
     "devicebuttons/jornada56x_home",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Model_Jornada_56x,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Record Button"),
     "devicebuttons/jornada56x_record",
     "QPE/VMemo", "toggleRecord()",
     "sound", "raise()" },
 };
 
 void Jornada::init(const QString&)
 {
     d->m_vendorstr = "HP";
     d->m_vendor = Vendor_HP;
     d->m_modelstr = "Jornada 56x";
     d->m_model = Model_Jornada_56x;
     d->m_rotation = Rot0;
     //Distribution detecting code is now in base class
 }
 
 void Jornada::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( jornada56x_buttons ) / sizeof( j_button )); i++ ) {
         j_button *ib = jornada56x_buttons + i;
         ODeviceButton b;
 
         if (( ib->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( ib->code );
             b. setUserText ( QObject::tr ( "Button", ib->utext ));
             b. setPixmap ( Resource::loadPixmap ( ib->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( ib->fpressedservice ), ib->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( ib->fheldservice ), ib->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
-
-    QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 int Jornada::displayBrightnessResolution() const
 {
     return 255;
 }
 
 
 bool Jornada::setDisplayBrightness( int bright )
 {
     bool res = false;
 
     if ( bright > 255 )
         bright = 255;
     if ( bright < 0 )
         bright = 0;
 
     QString cmdline;
 
     if ( !bright )
     	cmdline = QString().sprintf( "echo 4 > /sys/class/backlight/sa1100fb/power");
     else
     	cmdline = QString().sprintf( "echo 0 > /sys/class/backlight/sa1100fb/power; echo %d > /sys/class/backlight/sa1100fb/brightness", bright );
 
     res = ( ::system( (const char*) cmdline ) == 0 );
 
     return res;
 }
 
 
 bool Jornada::suspend( )
 {
     qDebug("ODevice::suspend");
     if ( !isQWS( ) ) // only qwsserver is allowed to suspend
         return false;
 
     if ( d->m_model == Model_Unknown ) // better don't suspend in qvfb / on unkown devices
         return false;
 
     bool res = false;
     ODevice::sendSuspendmsg();
 
     struct timeval tvs;
     ::gettimeofday ( &tvs, 0 );
 
     ::sync(); // flush fs caches
     res = ( ::system ( "apm --suspend" ) == 0 );
 
diff --git a/libopie2/opiecore/device/odevice_yopy.cpp b/libopie2/opiecore/device/odevice_yopy.cpp
index a06d7ec..8f22514 100644
--- a/libopie2/opiecore/device/odevice_yopy.cpp
+++ b/libopie2/opiecore/device/odevice_yopy.cpp
@@ -64,94 +64,90 @@ struct yopy_button yopy_buttons [] = {
     { Qt::Key_F11, QT_TRANSLATE_NOOP( "Button", "OK Button" ),
         "devicebuttons/yopy_ok",
         "addressbook", "raise()",
         "addressbook", "beamBusinessCard()" },
     { Qt::Key_F12, QT_TRANSLATE_NOOP( "Button", "End Button" ),
         "devicebuttons/yopy_end",
         "QPE/Launcher", "home()",
         "buttonsettings", "raise()" },
 };
 
 void Yopy::init(const QString&)
 {
     d->m_vendorstr = "G.Mate";
     d->m_vendor = Vendor_GMate;
     d->m_modelstr = "Yopy3700";
     d->m_model = Model_Yopy_3700;
     d->m_rotation = Rot0;
     d->m_systemstr = "Linupy";
     d->m_system = System_Linupy;
     // Distribution detection code now in the base class
 }
 
 
 void Yopy::initButtons()
 {
     if ( d->m_buttons )
         return ;
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( yopy_buttons ) / sizeof( yopy_button ) ); i++ )
     {
 
         yopy_button *ib = yopy_buttons + i;
 
         ODeviceButton b;
 
         b. setKeycode ( ib->code );
         b. setUserText ( QObject::tr ( "Button", ib->utext ) );
         b. setPixmap ( Resource::loadPixmap ( ib->pix ) );
         b. setFactoryPresetPressedAction
         ( OQCopMessage( makeChannel( ib->fpressedservice ), ib->fpressedaction ) );
         b. setFactoryPresetHeldAction
         ( OQCopMessage( makeChannel( ib->fheldservice ), ib->fheldaction ) );
 
         d->m_buttons->append ( b );
     }
     reloadButtonMapping();
-
-    QCopChannel *sysch = new QCopChannel( "QPE/System", this );
-    connect( sysch, SIGNAL( received(const QCString&,const QByteArray&) ),
-             this, SLOT( systemMessage(const QCString&,const QByteArray&) ) );
 }
 
 
 bool Yopy::suspend()
 {
     /* Opie for Yopy does not implement its own power management at the
         moment.  The public version runs parallel to X, and relies on the
         existing power management features. */
     return false;
 }
 
 
 bool Yopy::setDisplayBrightness( int bright )
 {
     /* The code here works, but is disabled as the current version runs
         parallel to X, and relies on the existing backlight demon. */
 #if 0
     if ( QFile::exists( "/proc/sys/pm/light" ) )
     {
         int fd = ::open( "/proc/sys/pm/light", O_WRONLY );
         if ( fd >= 0 )
         {
             if ( bright )
                 ::write( fd, "1\n", 2 );
             else
                 ::write( fd, "0\n", 2 );
             ::close( fd );
             return true;
         }
     }
 #else
     Q_UNUSED( bright )
 #endif
     return false;
 }
 
 
 int Yopy::displayBrightnessResolution() const
 {
     return 2;
 }
 
diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp
index 733479e..ebe1949 100644
--- a/libopie2/opiecore/device/odevice_zaurus.cpp
+++ b/libopie2/opiecore/device/odevice_zaurus.cpp
@@ -193,100 +193,96 @@ void Zaurus::init(const QString& cpu_info)
             d->m_direction = direction();
             break;
         case Model_Zaurus_SLB600:
         case Model_Zaurus_SL5500:
         case Model_Zaurus_SL5000:
         default:
             d->m_rotation = Rot270;
             break;
     }
     m_leds [0] = Led_Off;
 }
 
 void Zaurus::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     struct z_button * pz_buttons;
     int buttoncount;
     switch ( d->m_model ) {
         case Model_Zaurus_SLC7x0:
             pz_buttons = z_buttons_c700;
             buttoncount = ARRAY_SIZE(z_buttons_c700);
             break;
         default:
             pz_buttons = z_buttons;
             buttoncount = ARRAY_SIZE(z_buttons);
             break;
     }
 
     for ( int i = 0; i < buttoncount; i++ ) {
         struct z_button *zb = pz_buttons + i;
         ODeviceButton b;
 
         b. setKeycode ( zb->code );
         b. setUserText ( QObject::tr ( "Button", zb->utext ));
         b. setPixmap ( Resource::loadPixmap ( zb->pix ));
         b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb->fpressedservice ),
                                 zb->fpressedaction ));
         b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb->fheldservice ),
                                 zb->fheldaction ));
 
         d->m_buttons->append ( b );
     }
 
     reloadButtonMapping();
-
-    QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
-    connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)),
-        this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
 #define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
 //#define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */
 //#define SHARP_PDA_ERRORSOUND       5  /* error occurred */
 //#define SHARP_PDA_CRITICALSOUND    6  /* critical error occurred */
 //#define SHARP_PDA_SYSSTARTSOUND    7  /* system start */
 //#define SHARP_PDA_SYSTEMENDSOUND   8  /* system shutdown */
 //#define SHARP_PDA_APPSTART         9  /* application start */
 //#define SHARP_PDA_APPQUIT         10  /* application ends */
 
 //#define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 //#define SHARP_BUZ_DAILY_ALARM     12  /* daily alarm */
 //#define SHARP_BUZ_GOT_PHONE_CALL  13  /* phone call sound */
 //#define SHARP_BUZ_GOT_MAIL        14  /* mail sound */
 //
 
 #define	SHARP_LED_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_LED_SETSTATUS   (SHARP_LED_IOCTL_START+1)