disable screensaver if checked in config

1 files changed, 19 insertions, 0 deletions

diff --git a/noncore/net/wellenreiter/gui/wellenreiter.cpp b/noncore/net/wellenreiter/gui/wellenreiter.cpp
index 5dc2e79..14f251a 100644
--- a/noncore/net/wellenreiter/gui/wellenreiter.cpp
+++ b/noncore/net/wellenreiter/gui/wellenreiter.cpp
@@ -302,96 +302,105 @@ void Wellenreiter::receivePacket( OPacket* p )
 
     // check for a data frame
     OWaveLanDataPacket* data = static_cast<OWaveLanDataPacket*>( childIfToParse( p, "802.11 Data" ) );
     if ( data )
     {
         handleData( p, data );
     }
 
     handleNotification( p );
 
 }
 
 
 void Wellenreiter::stopClicked()
 {
     if ( iface )
     {
         disconnect( SIGNAL( receivedPacket(OPacket*) ), this, SLOT( receivePacket(OPacket*) ) );
         disconnect( SIGNAL( hopped(int) ), this, SLOT( channelHopped(int) ) );
         iface->setChannelHopping(); // stop hopping channels
     }
     else
         killTimers();
 
     pcap->close();
     sniffing = false;
 
     if ( iface )
     {
         // switch off monitor mode
         iface->setMonitorMode( false );
         // switch off promisc flag
         iface->setPromiscuousMode( false );
 
         system( "cardctl reset; sleep 1" ); //FIXME: Use OProcess
     }
 
     logwindow->log( "(i) Stopped Scanning." );
     assert( parent() );
     ( (QMainWindow*) parent() )->setCaption( "Wellenreiter II" );
 
     // message the user
     QMessageBox::information( this, "Wellenreiter II",
                               tr( "Your wireless card\nshould now be usable again." ) );
 
     sniffing = false;
     emit( stoppedSniffing() );
 
+    #ifdef QWS
+    if ( WellenreiterConfigWindow::instance()->disablePM->isChecked() )
+    {
+        QCopEnvelope( "QPE/System", "setScreenSaverMode(int)" ) << QPEApplication::Enable;
+    }
+    #else
+        #warning FIXME: setScreenSaverMode is not operational on the X11 build
+    #endif
+
     // print out statistics
     for( QMap<QString,int>::ConstIterator it = pcap->statistics().begin(); it != pcap->statistics().end(); ++it )
        statwindow->updateCounter( it.key(), it.data() );
 }
 
 
 void Wellenreiter::startClicked()
 {
     // get configuration from config window
 
     const QString& interface = configwindow->interfaceName->currentText();
     const int cardtype = configwindow->driverType();
     const int interval = configwindow->hoppingInterval();
 
     if ( ( interface == "" ) || ( cardtype == 0 ) )
     {
         QMessageBox::information( this, "Wellenreiter II",
                                   tr( "Your device is not\nproperly configured. Please reconfigure!" ) );
         return;
     }
 
     // configure device
     ONetwork* net = ONetwork::instance();
 
     // TODO: check if interface is wireless and support sniffing for non-wireless interfaces
 
     iface = static_cast<OWirelessNetworkInterface*>(net->interface( interface )); // fails if network is not wireless!
 
     // bring device UP
     iface->setUp( true );
     if ( !iface->isUp() )
     {
         QMessageBox::warning( this, "Wellenreiter II",
                             tr( "Can't bring interface '%1' up:\n" ).arg( iface->name() ) + strerror( errno ) );
         return;
     }
 
     // set monitor mode
     bool usePrism = configwindow->usePrismHeader();
 
     switch ( cardtype )
     {
         case DEVTYPE_CISCO: iface->setMonitoring( new OCiscoMonitoringInterface( iface, usePrism ) ); break;
         case DEVTYPE_WLAN_NG: iface->setMonitoring( new OWlanNGMonitoringInterface( iface, usePrism ) ); break;
         case DEVTYPE_HOSTAP: iface->setMonitoring( new OHostAPMonitoringInterface( iface, usePrism ) ); break;
         case DEVTYPE_ORINOCO: iface->setMonitoring( new OOrinocoMonitoringInterface( iface, usePrism ) ); break;
         case DEVTYPE_MANUAL: QMessageBox::information( this, "Wellenreiter II", tr( "Bring your device into\nmonitor mode now." ) ); break;
         case DEVTYPE_FILE: qDebug( "Wellenreiter: Capturing from file '%s'", (const char*) interface ); break;
@@ -429,96 +438,106 @@ void Wellenreiter::startClicked()
             QString dumpname( configwindow->captureFileName->text() );
             if ( dumpname.isEmpty() ) dumpname = "captureFile";
             dumpname.append( '-' );
             dumpname.append( QTime::currentTime().toString().replace( QRegExp( ":" ), "-" ) );
             dumpname.append( ".wellenreiter" );
             pcap->openDumpFile( dumpname );
         }
         else
         {
             pcap->open( interface );
         }
     }
     else
     {
         pcap->open( QFile( interface ) );
     }
 
     if ( !pcap->isOpen() )
     {
         QMessageBox::warning( this, "Wellenreiter II",
                               tr( "Can't open packet capturer for '%1':\n" ).arg( iface->name() ) + QString(strerror( errno ) ));
         return;
     }
 
     // set capturer to non-blocking mode
     pcap->setBlocking( false );
 
     // start channel hopper
     if ( cardtype != DEVTYPE_FILE )
     {
         logwindow->log( QString().sprintf( "(i) Starting channel hopper (d=%d ms)", configwindow->hopInterval->value() ) );
         iface->setChannelHopping( configwindow->hopInterval->value() ); //use interval from config window
     }
 
     if ( cardtype != DEVTYPE_FILE )
     {
         // connect socket notifier and start channel hopper
         connect( pcap, SIGNAL( receivedPacket(OPacket*) ), this, SLOT( receivePacket(OPacket*) ) );
         connect( iface->channelHopper(), SIGNAL( hopped(int) ), this, SLOT( channelHopped(int) ) );
     }
     else
     {
         // start timer for reading packets
         startTimer( 100 );
     }
 
     logwindow->log( "(i) Started Scanning." );
     sniffing = true;
+
+    #ifdef QWS
+    if ( WellenreiterConfigWindow::instance()->disablePM->isChecked() )
+    {
+        QCopEnvelope( "QPE/System", "setScreenSaverMode(int)" ) << QPEApplication::Disable;
+    }
+    #else
+        #warning FIXME: setScreenSaverMode is not operational on the X11 build
+    #endif
+
     emit( startedSniffing() );
     if ( cardtype != DEVTYPE_FILE ) channelHopped( 6 ); // set title
     else
     {
         assert( parent() );
         ( (QMainWindow*) parent() )->setCaption( tr( "Wellenreiter II - replaying capture file..." ) );
     }
 }
 
 
 void Wellenreiter::timerEvent( QTimerEvent* )
 {
     qDebug( "Wellenreiter::timerEvent()" );
     OPacket* p = pcap->next();
     if ( !p ) // no more packets available
     {
         stopClicked();
     }
     else
     {
         receivePacket( p );
         delete p;
     }
 }
 
 
 void Wellenreiter::doAction( const QString& action, const QString& protocol, OPacket* p )
 {
     #ifdef QWS
     if ( action == "TouchSound" )
         ODevice::inst()->touchSound();
     else if ( action == "AlarmSound" )
         ODevice::inst()->alarmSound();
     else if ( action == "KeySound" )
         ODevice::inst()->keySound();
     else if ( action == "LedOn" )
         ODevice::inst()->setLedState( Led_Mail, Led_On );
     else if ( action == "LedOff" )
         ODevice::inst()->setLedState( Led_Mail, Led_Off );
     else if ( action == "LogMessage" )
         logwindow->log( QString().sprintf( "Got packet with protocol '%s'", (const char*) protocol ) );
     else if ( action == "MessageBox" )
         QMessageBox::information( this, "Notification!",
         QString().sprintf( "Got packet with protocol '%s'", (const char*) protocol ) );
     #else
     #warning Actions do not work with Qt/X11 yet
     #endif
 }