- add fine granular backlight support for devices with the corgi backlight interface

- add hinge sensor framework for devices with hinge sensors

2 files changed, 113 insertions, 37 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index e24e043..bc09e92 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -137,15 +137,18 @@ public:
 
         virtual QValueList <OLed> ledList ( ) const;
         virtual QValueList <OLedState> ledStateList ( OLed led ) const;
         virtual OLedState ledState ( OLed led ) const;
         virtual bool setLedState ( OLed led, OLedState st );
 
+        virtual bool hasHingeSensor() const;
+        virtual OHingeStatus readHingeSensor();
+
         static bool isZaurus();
-        
-        // Does this break BC? 
+
+        // Does this break BC?
         virtual bool suspend ( );
         virtual Transformation rotation ( ) const;
         virtual ODirection direction ( ) const;
 
 protected:
         virtual void buzzer ( int snd );
@@ -530,13 +533,13 @@ void ODevice::initButtons ( )
         QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
         connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 ODevice::~ODevice ( )
 {
-// we leak m_devicebuttons and m_cpu_frequency 
+// we leak m_devicebuttons and m_cpu_frequency
 // but it's a singleton and it is not so importantant
 // -zecke
         delete d;
 }
 
 bool ODevice::setSoftSuspend ( bool /*soft*/ )
@@ -820,39 +823,55 @@ bool ODevice::setLedState ( OLed which, OLedState st )
 bool ODevice::hasLightSensor ( ) const
 {
         return false;
 }
 
 /**
- * @return a value from the light senso
+ * @return a value from the light sensor
  */
 int ODevice::readLightSensor ( )
 {
         return -1;
 }
 
 /**
- * @return the light sensor resolution whatever that is ;)
+ * @return the light sensor resolution
  */
 int ODevice::lightSensorResolution ( ) const
 {
         return 0;
 }
 
 /**
+ * @return if the device has a hinge sensor
+ */
+bool ODevice::hasHingeSensor ( ) const
+{
+        return false;
+}
+
+/**
+ * @return a value from the hinge sensor
+ */
+OHingeStatus ODevice::readHingeSensor ( )
+{
+        return CASE_UNKNOWN;
+}
+
+/**
  * @return a list with CPU frequencies supported by the hardware
  */
 const QStrList &ODevice::allowedCpuFrequencies ( ) const
 {
         return *d->m_cpu_frequencies;
 }
 
 
 /**
  * Set desired CPU frequency
- * 
+ *
  * @param index index into d->m_cpu_frequencies of the frequency to be set
  */
 bool ODevice::setCurrentCpuFrequency(uint index)
 {
         if (index >= d->m_cpu_frequencies->count())
                 return false;
@@ -1779,13 +1798,13 @@ void Zaurus::buzzer ( int sound )
                         break;
                 case SHARP_BUZ_KEYSOUND:
                         soundname = "keysound";
                         break;
                 default:
                         soundname = "alarm";
-                        
+
                 }
         }
 
         // If a soundname is defined, we expect that this device has
         // sound capabilities.. Otherwise we expect to have the buzzer
         // device..
@@ -1942,39 +1961,55 @@ bool Zaurus::setSoftSuspend ( bool soft )
     return res;
 }
 
 
 bool Zaurus::setDisplayBrightness ( int bright )
 {
-// FIXME The C7x0 have a proc-interface (/proc/drivers/corgi-bl) which
-//       is nice to use. Currently it exposes 16+1 levels. Implement this!
-//       (or wait for kergoth unifying the interfaces in the OpenZaurus kernel.)
-        bool res = false;
-        int fd;
-
-        if ( bright > 255 )
-                bright = 255;
-        if ( bright < 0 )
-                bright = 0;
-
-        if (m_embedix) {
-                if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
-                        int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
-                        if ( bright && !bl )
-                                bl = 1;
-                        res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
-                        ::close ( fd );
-                }
-        } else {
-#define FB_BACKLIGHT_SET_BRIGHTNESS     _IOW('F', 1, u_int)             /* set brightness */
-                if (( fd = ::open ( "/dev/fb0", O_WRONLY )) >= 0 ) {
-                        res = ( ::ioctl ( fd , FB_BACKLIGHT_SET_BRIGHTNESS, bright ) == 0 );
-                        ::close ( fd );
-                }
-        }
-        return res;
+    bool res = false;
+    int fd;
+
+    if ( bright > 255 ) bright = 255;
+    if ( bright < 0 ) bright = 0;
+
+    if ( m_embedix )
+    {
+        if ( d->m_model == Model_Zaurus_SLC7x0 )
+        {
+            // special treatment for devices with the corgi backlight interface
+            if (( fd = ::open ( "/proc/driver/fl/corgi-bl", O_WRONLY )) >= 0 )
+            {
+                if ( bright > 0x11 ) bright = 0x11;
+                char writeCommand[100];
+                const int count = sprintf( writeCommand, "0x%x\n", bright );
+                res = ( ::write ( fd, writeCommand, count ) != -1 );
+                ::close ( fd );
+            }
+            return res;
+        }
+        else
+        {
+            // standard treatment for devices with the dumb embedix frontlight interface
+            if (( fd = ::open ( "/dev/fl", O_WRONLY )) >= 0 ) {
+                int bl = ( bright * 4 + 127 ) / 255; // only 4 steps on zaurus
+                if ( bright && !bl )
+                    bl = 1;
+                res = ( ::ioctl ( fd, FL_IOCTL_STEP_CONTRAST, bl ) == 0 );
+                ::close ( fd );
+            }
+        }
+    }
+    else
+    {
+        // special treatment for the OpenZaurus unified interface
+        #define FB_BACKLIGHT_SET_BRIGHTNESS     _IOW('F', 1, u_int)             /* set brightness */
+        if (( fd = ::open ( "/dev/fb0", O_WRONLY )) >= 0 ) {
+            res = ( ::ioctl ( fd , FB_BACKLIGHT_SET_BRIGHTNESS, bright ) == 0 );
+            ::close ( fd );
+        }
+    }
+    return res;
 }
 
 bool Zaurus::suspend ( )
 {
         qDebug("ODevice::suspend");
         if ( !isQWS( ) ) // only qwsserver is allowed to suspend
@@ -2070,17 +2105,48 @@ ODirection Zaurus::direction ( ) const
 
 }
 
 int Zaurus::displayBrightnessResolution ( ) const
 {
         if (m_embedix)
-                return 5;
+                return d->m_model == Model_Zaurus_SLC7x0 ? 18 : 5;
         else
                 return 256;
 }
 
+bool Zaurus::hasHingeSensor() const
+{
+    return d->m_model == Model_Zaurus_SLC7x0;
+}
+
+OHingeStatus Zaurus::readHingeSensor()
+{
+    int handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK);
+    if (handle == -1)
+    {
+        qWarning("Zaurus::readHingeSensor() - failed (%s)", "unknown reason" ); //FIXME: use strerror
+        return CASE_UNKNOWN;
+    }
+    else
+    {
+        int retval = ::ioctl(handle, SHARP_IOCTL_GET_ROTATION);
+        ::close (handle);
+        if ( retval == CASE_CLOSED || retval == CASE_PORTRAIT || retval == CASE_LANDSCAPE )
+        {
+            qDebug( "Zaurus::readHingeSensor() - result = %d", retval );
+            return static_cast<OHingeStatus>( retval );
+        }
+        else
+        {
+            qWarning("Zaurus::readHingeSensor() - couldn't compute hinge status!" );
+            return CASE_UNKNOWN;
+        }
+    }
+}
+
+
 /**************************************************
  *
  * SIMpad
  *
  **************************************************/
 
diff --git a/libopie/odevice.h b/libopie/odevice.h
index 8273761..ee0b0ec 100644
--- a/libopie/odevice.h
+++ b/libopie/odevice.h
@@ -140,12 +140,19 @@ enum OHardKey {
 enum ODirection {
         CW   = 0,
         CCW  = 1,
         Flip = 2,
 };
 
+enum OHingeStatus {
+    CASE_CLOSED = 3,
+    CASE_PORTRAIT = 2,
+    CASE_LANDSCAPE = 0,
+    CASE_UNKNOWN = 1,
+};
+
 /**
  * A singleton which gives informations about device specefic option
  * like the Hardware used, LEDs, the Base Distribution and
  * hardware key mappings.
  *
  * @short A small class for device specefic options
@@ -204,14 +211,14 @@ public:
         // don't add new virtual methods, use this:
                 ///*virtual */ void boo(int i ) { return virtual_hook(1,&i); };
         // and in your subclass do do overwrite
                 //protected virtual int virtual_hook(int, void *)
         // which is defined below
 
-// input / output
-        //FIXME playAlarmSound and al might be better -zecke
+    // input / output
+    //FIXME playAlarmSound and al might be better -zecke
         virtual void alarmSound ( );
         virtual void keySound ( );
         virtual void touchSound ( );
 
         virtual QValueList <OLed> ledList ( ) const;
         virtual QValueList <OLedState> ledStateList ( OLed led ) const;
@@ -219,12 +226,15 @@ public:
         virtual bool setLedState ( OLed led, OLedState st );
 
         virtual bool hasLightSensor ( ) const;
         virtual int readLightSensor ( );
         virtual int lightSensorResolution ( ) const;
 
+        virtual bool hasHingeSensor ( ) const;
+        virtual OHingeStatus readHingeSensor ( );
+
         const QStrList &allowedCpuFrequencies() const;
         bool setCurrentCpuFrequency(uint index);
 
         /**
          * Returns the available buttons on this device.  The number and location
          * of buttons will vary depending on the device.  Button numbers will be assigned