Patch by Till Harbum for SIMpad to more properly use the ChipSelect3

proc filesystem interface.

Method introduced:
setCS3Bit

This method reads the current CS3 Bits before setting the new bit. Using
this function allows to toggle the display without overwriting other
CS3 bits for example the DECT_ON bit

1 files changed, 68 insertions, 19 deletions

diff --git a/libopie2/opiecore/device/odevice_simpad.cpp b/libopie2/opiecore/device/odevice_simpad.cpp
index 2d0160d..fd46b95 100644
--- a/libopie2/opiecore/device/odevice_simpad.cpp
+++ b/libopie2/opiecore/device/odevice_simpad.cpp
@@ -1,349 +1,398 @@
 /*
                              This file is part of the Opie Project
                              Copyright (C) The Opie Team <opie-devel@handhelds.org>
               =.
             .=l.
            .>+-=
  _;:,     .>    :=|.         This program is free software; you can
 .> <`_,   >  .   <=          redistribute it and/or  modify it under
 :`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
 .="- .-=="i,     .._         License as published by the Free Software
  - .   .-<_>     .<>         Foundation; either version 2 of the License,
      ._= =}       :          or (at your option) any later version.
     .%`+i>       _;_.
     .i_,=:_.      -<s.       This program is distributed in the hope that
      +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
     : ..    .:,     . . .    without even the implied warranty of
     =_        +     =;=|`    MERCHANTABILITY or FITNESS FOR A
   _.=:.       :    :=>`:     PARTICULAR PURPOSE. See the GNU
 ..}^=.=       =       ;      Library General Public License for more
 ++=   -.     .`     .:       details.
  :     =  ...= . :.=-
  -.   .:....=;==+<;          You should have received a copy of the GNU
   -_. . .   )=.  =           Library General Public License along with
     --        :-=`           this library; see the file COPYING.LIB.
                              If not, write to the Free Software Foundation,
                              Inc., 59 Temple Place - Suite 330,
                              Boston, MA 02111-1307, USA.
 */
 
 #include "odevice_simpad.h"
 
 /* QT */
 #include <qapplication.h>
 #include <qfile.h>
 #include <qtextstream.h>
 #include <qwindowsystem_qws.h>
 
 /* OPIE */
 #include <qpe/config.h>
 #include <qpe/resource.h>
 #include <qpe/sound.h>
 #include <qpe/qcopenvelope_qws.h>
 #include <opie2/okeyfilter.h>
 
 /* STD */
 #include <fcntl.h>
 #include <math.h>
 #include <stdlib.h>
 #include <signal.h>
 #include <sys/ioctl.h>
 #include <sys/time.h>
 #include <unistd.h>
 #ifndef QT_NO_SOUND
 #include <linux/soundcard.h>
 #endif
 
 using namespace Opie::Core;
 using namespace Opie::Core::Internal;
 
 struct s_button simpad_buttons [] = {
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F9, QT_TRANSLATE_NOOP("Button", "Lower+Up"),
     "devicebuttons/simpad_lower_up",
     "datebook", "nextView()",
     "today", "raise()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F10, QT_TRANSLATE_NOOP("Button", "Lower+Down"),
     "devicebuttons/simpad_lower_down",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F11, QT_TRANSLATE_NOOP("Button", "Lower+Right"),
     "devicebuttons/simpad_lower_right",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Lower+Left"),
     "devicebuttons/simpad_lower_left",
     "opiemail", "raise()",
     "opiemail", "newMail()" },
 
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F5, QT_TRANSLATE_NOOP("Button", "Upper+Up"),
     "devicebuttons/simpad_upper_up",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F6, QT_TRANSLATE_NOOP("Button", "Upper+Down"),
     "devicebuttons/simpad_upper_down",
     "addressbook", "raise()",
     "addressbook", "beamBusinessCard()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F7, QT_TRANSLATE_NOOP("Button", "Upper+Right"),
     "devicebuttons/simpad_upper_right",
     "QPE/TaskBar", "toggleMenu()",
     "QPE/TaskBar", "toggleStartMenu()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F13, QT_TRANSLATE_NOOP("Button", "Upper+Left"),
     "devicebuttons/simpad_upper_left",
     "QPE/Rotation", "flip()",
     "QPE/Rotation", "flip()" },
     /*
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Lower+Upper"),
     "devicebuttons/simpad_lower_upper",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Lower+Upper"),
     "devicebuttons/simpad_upper_lower",
     "QPE/Launcher", "home()",
     "buttonsettings", "raise()" },
     */
 };
 
 void SIMpad::init(const QString&)
 {
     d->m_vendorstr = "SIEMENS";
     d->m_vendor = Vendor_SIEMENS;
 
 
     //TODO Implement model checking
     //FIXME For now we assume an SL4
 
     d->m_modelstr = "SL4";
     d->m_model = Model_SIMpad_SL4;
 
     switch ( d->m_model ) {
         default:
             d->m_rotation = Rot0;
             d->m_direction = CCW;
             d->m_holdtime = 1000; // 1000ms
 
             break;
     }
 
     //Distribution detecting code is now in base class
     m_leds [0] = m_leds [1] = Led_Off;
 
     m_power_timer = 0;
 
 }
 
 void SIMpad::initButtons()
 {
     if ( d->m_buttons )
         return;
 
     if ( isQWS( ) ) {
         addPreHandler(this);
     }
 
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) {
         s_button *sb = simpad_buttons + i;
         ODeviceButton b;
 
         if (( sb->model & d->m_model ) == d->m_model ) {
             b. setKeycode ( sb->code );
             b. setUserText ( QObject::tr ( "Button", sb->utext ));
             b. setPixmap ( Resource::loadPixmap ( sb->pix ));
             b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb->fpressedservice ), sb->fpressedaction ));
             b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb->fheldservice ), sb->fheldaction ));
 
             d->m_buttons->append ( b );
         }
     }
     reloadButtonMapping();
 
     QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
     connect ( sysch, SIGNAL( received(const QCString&,const QByteArray&)), this, SLOT( systemMessage(const QCString&,const QByteArray&)));
 }
 
 // SIMpad boardcontrol register CS3
 #define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
 #define SIMPAD_LED2_ON                     0x1000
 #define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
 #define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
 #define SIMPAD_RESET_SIMCARD               0x8000
 
 //SIMpad touchscreen backlight strength control
 #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL"
 #define SIMPAD_BACKLIGHT_MASK    0x00a10044
 
+
+/*
+ * The SIMpad exposes ChipSelect3 to userspace
+ * via a proc filesystem file. Using this register
+ * one can toggle power of serial, irda, dect circuits
+ * change the video driver and display status and
+ * many more things.
+ * To not lose the current setting we read the current
+ * cs3 setting and toggle the necessary bits and then
+ * write it.
+ */
+static bool setCS3Bit(  bool bitset, int bit ) {
+    int cs3_fd = ::open( SIMPAD_BOARDCONTROL, O_RDONLY );
+
+    if ( cs3_fd < 0 )
+        return false;
+
+    static char line[32];
+    int  val = 0;
+    bool ok  = false;
+
+    /*
+     * try to read and parse the Chipselect3 status
+     * be paranoid and make sure line[31] is null
+     * terminated
+     */
+    while( !ok && ::read(cs3_fd, &line, sizeof(line)) > 0 ) {
+        line[31] = '\0';
+        if (::sscanf(line, "Chipselect3 : %x", &val ))
+            ok = true;
+    }
+
+    ::close(cs3_fd);
+
+    /*
+     * we were not able to find the current value
+     * and as a result we won't set it
+     */
+    if ( !ok )
+        return false;
+
+    /*
+     * change the value
+     */
+    val = bitset ? (val | bit) : (val & ~bit);
+
+    /*
+     * write it back
+     */
+    cs3_fd = ::open( SIMPAD_BOARDCONTROL, O_WRONLY );
+    if ( cs3_fd < 0 )
+        return false;
+
+    ::snprintf(line, sizeof(line), "0x%04x\n", val);
+    ::write(cs3_fd, line, strlen(line));
+    ::close(cs3_fd);
+
+    return true;
+}
+
+
 QValueList <OLed> SIMpad::ledList() const
 {
     QValueList <OLed> vl;
     vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one?
     //vl << Led_Mail; //TODO find out if LED1 is accessible anyway
     return vl;
 }
 
 QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const
 {
     QValueList <OLedState> vl;
 
     if ( l == Led_Power )  //FIXME which LED is LED2 ? The green one or the amber one?
         vl << Led_Off << Led_On;
     //else if ( l == Led_Mail ) //TODO find out if LED1 is accessible anyway
         //vl << Led_Off;
     return vl;
 }
 
 OLedState SIMpad::ledState ( OLed l ) const
 {
     switch ( l ) {
         case Led_Power:
             return m_leds [0];
         //case Led_Mail:
         //  return m_leds [1];
         default:
             return Led_Off;
     }
 }
 
 bool SIMpad::setLedState ( OLed l, OLedState st )
 {
-#if 0
-    static int fd = ::open ( SIMPAD_BOARDCONTROL, O_RDWR | O_NONBLOCK );
-
-            /*TODO Implement this like that:
-            read from cs3
-            && with SIMPAD_LED2_ON
-            write to cs3 */
-                m_leds [0] = st;
-                return true;
- //          }
-//        }
-#else
-    Q_UNUSED( l )
-    Q_UNUSED( st )
-#endif
+    if ( l == Led_Power ) {
+        m_leds [0] = st;
+        setCS3Bit(st == Led_On, SIMPAD_LED2_ON);
+        return true;
+    }
+
     return false;
 }
 
 
 bool SIMpad::filter ( int /*unicode*/, int /*keycode*/, int /*modifiers*/, bool /*isPress*/, bool /*autoRepeat*/ )
 {
     //TODO
     return false;
 }
 
 void SIMpad::timerEvent ( QTimerEvent * )
 {
     killTimer ( m_power_timer );
     m_power_timer = 0;
     QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
     QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
 }
 
 
 void SIMpad::playAlarmSound()
 {
 #ifndef QT_NO_SOUND
     static Sound snd ( "alarm" );
 
     /* save as the Sound is static! */
     changeMixerForAlarm( 0, "/dev/sound/mixer" , &snd);
     snd. play();
 #endif
 }
 
 
 bool SIMpad::suspend() // Must override because SIMpad does NOT have apm
 {
     qDebug( "ODevice for SIMpad: suspend()" );
     if ( !isQWS( ) ) // only qwsserver is allowed to suspend
         return false;
 
     /*
      * we need to save the screen content
      * then go to suspend using ODevice::suspend
      * and finally restore the screen content
      */
     (void)::system( "cat /dev/fb/0 > /tmp/.buffer" );
     bool res  = ODevice::suspend();
 
     /*
      * restore
      */
     if ( res )
         ::system( "cat /tmp/.buffer > /dev/fb/0" );
 
     return res;
 }
 
 
 bool SIMpad::setSoftSuspend ( bool soft )
 {
     qDebug( "ODevice for SIMpad: UNHANDLED setSoftSuspend(%s)", soft? "on" : "off" );
     return false;
 }
 
 
 bool SIMpad::setDisplayStatus ( bool on )
 {
     qDebug( "ODevice for SIMpad: setDisplayStatus(%s)", on? "on" : "off" );
 
-
-    QString cmdline = QString().sprintf( "echo %s > /proc/cs3", on ? "0xd41a" : "0xd40a" ); //TODO make better :)
-
-    return ( ::system( (const char*) cmdline ) == 0 );
+    return setCS3Bit(on, SIMPAD_DISPLAY_ON);
 }
 
 
 bool SIMpad::setDisplayBrightness ( int bright )
 {
     qDebug( "ODevice for SIMpad: setDisplayBrightness( %d )", bright );
     bool res = false;
     int fd;
 
     if ( bright > 255 )
         bright = 255;
     if ( bright < 1 )
         bright = 0;
 
     if (( fd = ::open ( SIMPAD_BACKLIGHT_CONTROL, O_WRONLY )) >= 0 ) {
         int value = 255 - bright;
         const int mask = SIMPAD_BACKLIGHT_MASK;
         value = value << 8;
         value += mask;
         char writeCommand[100];
         const int count = snprintf( writeCommand, sizeof(writeCommand), "0x%x\n", value );
         res = ( ::write ( fd, writeCommand, count ) != -1 );
         ::close ( fd );
     }
     return res;
 }
 
 
 int SIMpad::displayBrightnessResolution() const
 {
     return 255; // All SIMpad models share the same display
 }