- io_modem must keep copy of profile, otherwise it crashes (now it works -

  doh!)
- try to use key/value pairs for dialing where currently possible (init string
  and dial sequence)
- when editing telephone number, try to read in, including special chars
  stripping (-, /, whitespace) using QRegExp

6 files changed, 21 insertions, 9 deletions

diff --git a/noncore/apps/opie-console/dialdialog.cpp b/noncore/apps/opie-console/dialdialog.cpp
index 8bf32f9..0ace8f7 100644
--- a/noncore/apps/opie-console/dialdialog.cpp
+++ b/noncore/apps/opie-console/dialdialog.cpp
@@ -31,65 +31,73 @@ DialDialog::DialDialog(  QWidget* parent, const char* name, bool modal, WFlags f
     LCD->setNumDigits( 25 );
     LCD->setSegmentStyle( QLCDNumber::Flat );
     LCD->setMaximumHeight( 30 );
 
     QGridLayout *layout = new QGridLayout( this , 4, 3 );
 
     QButtonGroup *dialButtons = new QButtonGroup( );
 
     QPushButton *number0 = new QPushButton( this );
     number0->setText( QString( "0" ) );
     QFont number0_font( number0->font() );
     number0_font.setBold( TRUE );
     number0->setFont( number0_font );
     layout->addWidget( number0, 4, 1 );
     dialButtons->insert( number0 );
 
     int x = 0, y = 0;
     for ( int i = 0 ; i < 9;  i++ ) {
         QPushButton *number = new QPushButton( this );
         number->setText( QString( "%1" ).arg( i + 1 ) );
         QFont number_font( number->font() );
         number_font.setBold( TRUE );
         number->setFont( number_font );
 
         dialButtons->insert( number );
 
         layout->addWidget( number, x, y );
 
         if ( y < 2 ) {
             y++;
         } else {
             x++;
             y = 0;
         }
     }
 
     connect( dialButtons, SIGNAL( clicked( int ) ), this, SLOT( slotEnterNumber( int ) ) );
 
     mainLayout->addStretch( 0 );
     mainLayout->addWidget( textLabel );
     mainLayout->addWidget( LCD );
     mainLayout->addStretch( 0 );
     mainLayout->addLayout( layout );
     mainLayout->addStretch( 0 );
 
 
 }
 
 
 void DialDialog::slotEnterNumber( int number ) {
 
     // pretty stupid, just for testing .-)
 
     m_number = ( m_number * 10 ) + number;
     qDebug( QString("%1").arg( m_number ) );
     LCD->display( m_number );
 
 }
 
 DialDialog::~DialDialog() {
 }
 
 QString DialDialog::number() {
     return QString( "%1").arg( m_number );
+
 }
+
+void DialDialog::setNumber( int number )
+{
+    m_number = number;
+    LCD->display( m_number );
+}
+
diff --git a/noncore/apps/opie-console/dialdialog.h b/noncore/apps/opie-console/dialdialog.h
index 5c5b948..bec7b81 100644
--- a/noncore/apps/opie-console/dialdialog.h
+++ b/noncore/apps/opie-console/dialdialog.h
@@ -1,29 +1,31 @@
 
 #ifndef DIALDIALOG_H
 #define DIALDIALOG_H
 
 #include <qdialog.h>
 #include <qstring.h>
 #include <qlcdnumber.h>
 
 class DialDialog : public QDialog {
 
     Q_OBJECT
 
 public:
     DialDialog( QWidget* parent = 0,  const char* name = 0, bool modal = FALSE, WFlags fl = 0 );
 
     ~DialDialog();
 
     QString number();
 
+    void setNumber( int );
+
 private:
     float m_number;
     QLCDNumber *LCD;
 
 private slots:
     void slotEnterNumber( int );
 };
 
 
 #endif
diff --git a/noncore/apps/opie-console/dialer.cpp b/noncore/apps/opie-console/dialer.cpp
index 90e2b6c..89a0e8d 100644
--- a/noncore/apps/opie-console/dialer.cpp
+++ b/noncore/apps/opie-console/dialer.cpp
@@ -64,153 +64,154 @@ Dialer::Dialer(const Profile& profile, QWidget *parent, const char *name)
 	vbox->add(status);
 	vbox->add(cancel);
 
 	connect(cancel, SIGNAL(clicked()), SLOT(slotCancel()));
 
 	show();
 
 	QTimer::singleShot(500, this, SLOT(slotAutostart()));
 }
 
 Dialer::~Dialer()
 {
 }
 
 void Dialer::slotCancel()
 {
 	if(state != state_online)
 	{
 		usercancel = 1;
 		reset();
 	}
 	else accept();
 }
 
 void Dialer::reset()
 {
 	switchState(state_cancel);
 }
 
 void Dialer::slotAutostart()
 {
 	state = state_preinit;
 	dial(m_profile.readEntry("Number"));
 }
 
 void Dialer::dial(const QString& number)
 {
 	while(state != state_online)
 	{
 		if(!usercancel)
 		{
 			trydial(number);
 		}
 		else break;
 	}
 
 	if(usercancel)
 	{
 		reject();
 	}
 }
 
 void Dialer::trydial(const QString& number)
 {
 	if(state != state_cancel)
 	{
 		switchState(state_preinit);
 		// ...
 		QString response = receive();
 	}
 
 	if(state != state_cancel)
 	{
 		switchState(state_init);
-		send("ATZ");
+		//send("ATZ");
+		send(m_profile.readEntry("InitString"));
 		QString response2 = receive();
 	}
 
 	if(state != state_cancel)
 	{
 		switchState(state_options);
 
 		send("ATM0L0");
 		QString response3 = receive();
 	}
 
 	if(state != state_cancel)
 	{
 		switchState(state_dialtone);
 
 		send("ATX1");
 		QString response4 = receive();
 	}
 
 	if(state != state_cancel)
 	{
 		switchState(state_dialing);
 
-		send(QString("ATDT %1").arg(number));
+		send(QString("%1 %2").arg(m_profile.readEntry("DialPrefix1")).arg(number));
 		QString response5 = receive();
 	}
 	
 	if(state != state_cancel)
 	{
 		switchState(state_online);
 	}
 }
 
 void Dialer::send(const QString& msg)
 {
 	QString m = msg;
 	int bytes;
 	QString termination;
 
 	termination = m_profile.readEntry("Termination");
 	if(termination == "\n") m = m + "\n";
 	else if(termination == "\r") m = m + "\r";
 	else m = m + "\r\n";
 
 	bytes = write(0, m.local8Bit(), strlen(m.local8Bit()));
 	if(bytes < 0)
 	{
 		reset();
 	}
 }
 
 QString Dialer::receive()
 {
 	for(int i = 0; i < 200000;i++)
 		qApp->processEvents();
 	return QString::null;
 }
 
 void Dialer::switchState(int newstate)
 {
 	int oldstate = state;
 	state = newstate;
 
 	switch(state)
 	{
 		case state_cancel:
 			status->setText(QObject::tr("Cancelling..."));
 			progress->setProgress(0);
 			break;
 		case state_preinit:
 			status->setText(QObject::tr("Searching modem"));
 			progress->setProgress(10);
 			break;
 		case state_init:
 			status->setText(QObject::tr("Initializing..."));
 			progress->setProgress(20);
 			break;
 		case state_options:
 			status->setText(QObject::tr("Reset speakers"));
 			progress->setProgress(30);
 			break;
 		case state_dialtone:
 			status->setText(QObject::tr("Turning off dialtone"));
 			progress->setProgress(40);
 			break;
 		case state_dialing:
 			if(oldstate != state_dialing) status->setText(QObject::tr("Dial number"));
 			else status->setText(QObject::tr("Line busy, redialing number"));
diff --git a/noncore/apps/opie-console/io_modem.cpp b/noncore/apps/opie-console/io_modem.cpp
index d93dc5a..22a3673 100644
--- a/noncore/apps/opie-console/io_modem.cpp
+++ b/noncore/apps/opie-console/io_modem.cpp
@@ -1,80 +1,78 @@
 
 #include "io_modem.h"
 
 #include "dialer.h"
 
 IOModem::IOModem( const Profile &profile )
-	: IOSerial( profile ),  m_profile( profile ) {
+	: IOSerial( profile ) {
+	m_profile = profile;
 }
 
 
 IOModem::~IOModem() {
 
 }
 
 
 void IOModem::close() {
+	// maybe do a hangup here just in case...?
 
     IOSerial::close();
-
 }
 
 bool IOModem::open() {
     bool ret = IOSerial::open();
 	if(!ret) return false;
 
-	qWarning("IOModem::open continues...");
-
 	Dialer d(m_profile);
-	qWarning("dialer created");
 
 	int result = d.exec();
 	if(result == QDialog::Accepted)
 	{
 		return true;
 	}
 	else return false;
 }
 
 void IOModem::reload( const Profile &config ) {
 
     m_device = config.readEntry("Device", MODEM_DEFAULT_DEVICE);
     m_baud = config.readNumEntry("Baud", MODEM_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", MODEM_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", MODEM_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", MODEM_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", MODEM_DEFAULT_FLOW);
 
     m_initString = config.readEntry("InitString", MODEM_DEFAULT_INIT_STRING );
     m_resetString = config.readEntry("ResetString", MODEM_DEFAULT_RESET_STRING );
     m_dialPref1 = config.readEntry("DialPrefix1", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf1 = config.readEntry("DialSuffix1", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_dialPref2 = config.readEntry("DialPrefix2", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf2 = config.readEntry("DialSuffix2", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_dialPref3 = config.readEntry("DialPrefix3", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf3 = config.readEntry("DialSuffix3", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_connect = config.readEntry("DefaultConnect" MODEM_DEFAULT_CONNECT_STRING );
     m_hangup = config.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING );
     m_cancel = config.readEntry("CancelString", MODEM_DEFAULT_CANCEL_STRING );
     m_dialTime = config.readNumEntry("DialTime", MODEM_DEFAULT_DIAL_TIME );
     m_delayRedial = config.readNumEntry("DelayRedial", MODEM_DEFAULT_DELAY_REDIAL );
     m_numberTries = config.readNumEntry("NumberTries", MODEM_DEFAULT_NUMBER_TRIES );
     m_dtrDropTime = config.readNumEntry("DTRDRopTime", MODEM_DEFAULT_DTR_DROP_TIME );
     m_bpsDetect = config.readBoolEntry("BPSDetect", MODEM_DEFAULT_BPS_DETECT );
     m_dcdLines = config.readBoolEntry("DCDLines", MODEM_DEFAULT_DCD_LINES );
     m_multiLineUntag = config.readBoolEntry("MultiLineUntag", MODEM_DEFAULT_MULTI_LINE_UNTAG );
 }
 
 
 QString IOModem::identifier() const {
     return "modem";
 }
 
 QString IOModem::name() const {
     return "Modem IO Layer";
 }
 
 void IOModem::slotExited(OProcess* proc ){
     close();
 }
 
diff --git a/noncore/apps/opie-console/io_modem.h b/noncore/apps/opie-console/io_modem.h
index d681f66..8453b95 100644
--- a/noncore/apps/opie-console/io_modem.h
+++ b/noncore/apps/opie-console/io_modem.h
@@ -1,71 +1,71 @@
 #ifndef OPIE_IO_MODEM
 #define OPIE_IO_MODEM
 
 #include <opie/oprocess.h>
 #include "io_serial.h"
 #include "profile.h"
 
 /* Default values to be used if the profile information is incomplete */
 #define MODEM_DEFAULT_DEVICE       "/dev/ttyS0"
 #define MODEM_DEFAULT_BAUD         9600
 #define MODEM_DEFAULT_PARITY       0
 #define MODEM_DEFAULT_DBITS        8
 #define MODEM_DEFAULT_SBITS        1
 #define MODEM_DEFAULT_FLOW         0
 
 #define MODEM_DEFAULT_INIT_STRING  "~^M~ATZ^M~"
 #define MODEM_DEFAULT_RESET_STRING "~^M~ATZ^M~"
 #define MODEM_DEFAULT_DIAL_PREFIX1 "ATDT"
 #define MODEM_DEFAULT_DIAL_SUFFIX1 "^M"
 #define MODEM_DEFAULT_DIAL_PREFIX2 "ATDP"
 #define MODEM_DEFAULT_DIAL_SUFFIX2 "^M"
 #define MODEM_DEFAULT_DIAL_PREFIX3 "ATX1DT"
 #define MODEM_DEFAULT_DIAL_SUFFIX3 ";X4D^M"
 #define MODEM_DEFAULT_CONNECT_STRING "CONNECT"
 #define MODEM_DEFAULT_HANGUP_STRING "~~+++~~ATH^M"
 #define MODEM_DEFAULT_CANCEL_STRING "^M"
 #define MODEM_DEFAULT_DIAL_TIME     45
 #define MODEM_DEFAULT_DELAY_REDIAL  2
 #define MODEM_DEFAULT_NUMBER_TRIES  10
 #define MODEM_DEFAULT_DTR_DROP_TIME 1
 #define MODEM_DEFAULT_BPS_DETECT    0   // bool
 #define MODEM_DEFAULT_DCD_LINES     1   //bool
 #define MODEM_DEFAULT_MULTI_LINE_UNTAG 0 // bool
 
 /* IOSerial implements a RS232 IO Layer */
 
 class IOModem : public IOSerial {
 
     Q_OBJECT
 
 public:
 
     IOModem(const Profile &);
     ~IOModem();
 
     QString identifier() const;
     QString name() const;
 
 signals:
     void received(const QByteArray &);
     void error(int, const QString &);
 
 public slots:
     bool open();
     void close();
     void reload(const Profile &);
 
 private:
 
     QString m_initString, m_resetString, m_dialPref1, m_dialSuf1, m_dialPref2,
         m_dialSuf2, m_dialPref3, m_dialSuf3, m_connect, m_hangup, m_cancel;
     int  m_dialTime, m_delayRedial, m_numberTries, m_dtrDropTime,
         m_bpsDetect, m_dcdLines, m_multiLineUntag;
-	const Profile& m_profile;
+	Profile m_profile;
 
 private slots:
     void slotExited(OProcess* proc);
 
 };
 
 #endif
diff --git a/noncore/apps/opie-console/modemconfigwidget.cpp b/noncore/apps/opie-console/modemconfigwidget.cpp
index 0f0ce7c..878b0cf 100644
--- a/noncore/apps/opie-console/modemconfigwidget.cpp
+++ b/noncore/apps/opie-console/modemconfigwidget.cpp
@@ -1,71 +1,71 @@
 #include <qlabel.h>
 #include <qlayout.h>
 #include <qcombobox.h>
 #include <qlineedit.h>
 #include <qpushbutton.h>
 #include <qhbox.h>
-
+#include <qregexp.h>
 
 #include "modemconfigwidget.h"
 #include "dialdialog.h"
 
 namespace {
     void setCurrent( const QString& str, QComboBox* bo ) {
         uint b = bo->count();
         for (uint i = 0; i < bo->count(); i++ ) {
             if ( bo->text(i) == str ) {
                 bo->setCurrentItem( i );
                 return;
             }
         }
         bo->insertItem( str );
         bo->setCurrentItem( b );
     }
 }
 
 ModemConfigWidget::ModemConfigWidget( const QString& name, QWidget* parent,
                                 const char* na )
     : ProfileDialogConnectionWidget( name, parent, na ) {
 
     m_lay = new QVBoxLayout( this );
     m_device = new QLabel(tr( "Modem is attached to:" ), this );
     m_deviceCmb = new QComboBox(this );
     m_deviceCmb->setEditable( TRUE );
 
     QLabel* telLabel = new QLabel( this );
     telLabel->setText( tr( "Enter telefon number here:" ) );
     m_telNumber = new QLineEdit( this );
     QHBox *buttonBox = new QHBox( this );
     QPushButton *atButton = new QPushButton( buttonBox );
     atButton->setText( tr( "AT commands" ) );
     connect( atButton, SIGNAL( clicked() ), this, SLOT( slotAT() ) );
 
     QPushButton *dialButton = new QPushButton( buttonBox );
     dialButton->setText( tr( "Enter number" ) );
     connect( dialButton, SIGNAL( clicked() ), this, SLOT( slotDial() ) );
 
 
     m_base = new IOLayerBase( this, "base" );
 
     m_lay->addWidget( m_device );
     m_lay->addWidget( m_deviceCmb );
     m_lay->addWidget( telLabel );
     m_lay->addWidget( m_telNumber );
     m_lay->addWidget( buttonBox );
     m_lay->addWidget( m_base );
 
     m_deviceCmb->insertItem( "/dev/ttyS0" );
     m_deviceCmb->insertItem( "/dev/ttyS1" );
     m_deviceCmb->insertItem( "/dev/ttyS2" );
 
     atConf = new  ATConfigDialog( this, "ATConfig", true );
 }
 
 ModemConfigWidget::~ModemConfigWidget() {
 
 }
 void ModemConfigWidget::load( const Profile& prof ) {
 
     int rad_flow = prof.readNumEntry( "Flow" );
     int rad_parity = prof.readNumEntry( "Parity" );
     int speed = prof.readNumEntry( "Speed" );
@@ -126,69 +126,72 @@ void ModemConfigWidget::load( const Profile& prof ) {
  */
 void ModemConfigWidget::save( Profile& prof ) {
     int flow, parity, speed;
     prof.writeEntry( "Device", m_deviceCmb->currentText() );
 
 
     switch( m_base->flow() ) {
     case IOLayerBase::None:
         flow = 0;
         break;
     case IOLayerBase::Software:
         flow = 2;
         break;
     case IOLayerBase::Hardware:
         flow = 1;
         break;
     }
 
     switch( m_base->parity() ) {
     case IOLayerBase::Odd:
         parity = 2;
         break;
     case IOLayerBase::Even:
         parity = 1;
         break;
     case IOLayerBase::NonePar:
         parity = 0;
         break;
     }
 
     switch( m_base->speed() ) {
     case IOLayerBase::Baud_115200:
         speed = 115200;
         break;
     case IOLayerBase::Baud_57600:
         speed = 57600;
         break;
     case IOLayerBase::Baud_38400:
         speed = 38400;
         break;
     case IOLayerBase::Baud_19200:
         speed = 19200;
         break;
     case IOLayerBase::Baud_9600:
         speed = 9600;
         break;
     }
 
     prof.writeEntry( "Flow", flow );
     prof.writeEntry( "Parity", parity );
     prof.writeEntry( "Speed", speed );
     prof.writeEntry( "Number", m_telNumber->text() );
 }
 
 void ModemConfigWidget::slotAT() {
     //  ATConfigDialog conf( this, "ATConfig", true );
     atConf->showMaximized();
     if ( atConf->exec() == QDialog::Accepted ) {
         //      atConf->writeConfig();
     }
 }
 
 void ModemConfigWidget::slotDial() {
     DialDialog dial( this, "DialConfig", true );
+    if(!m_telNumber->text().isEmpty()) {
+        dial.setNumber(m_telNumber->text().replace(QRegExp("[\\-\\/\\ ]"), "").toInt());
+    }
     dial.showMaximized();
     if ( dial.exec() == QDialog::Accepted ) {
         m_telNumber->setText( dial.number() );
     }
 }